Рубрика

The order and sequence of inspections of protective breathing apparatus and respirators

The order and sequence of inspections, maintenance of protective breathing apparatus

Operational test:

(a) an external inspection of air breathing apparatus;

b) check the tightness of воздухопроводной system of the machine on discharge;

c) check of the work of the lung machine and exhalation valve;

d) test of the switch of reserve (where it exists);

e) check of serviceability of the signal devices (where it exists);

f) check the pressure of the air in the cylinders (and).

Note: When used in an air breathing apparatus lung machine with a device to create excessive pressure by mask, in front of the unsuitable for breathing environment system pressure gauge pressure of air in a mask must life is turned on.

Check № 1:

a) check of the serviceability of his mask;

b) an external inspection of air breathing apparatus;

c) check the tightness of воздухопроводной system of the machine on vacuum;

d) check of the work of the lung machine and exhalation valve;

e) check the pressure of the air in the cylinders (and)

f) check the tightness of systems of the high and reduced pressure;

g) check of serviceability of the switch of reserve (where it exists);

h) the Test of the alarm (where it is).

Check № 2:

a) cleaning of air breathing apparatus;

b) an External inspection of air breathing apparatus;

c) check of the serviceability and control gear;

d) check of the serviceability and regulation of the safety valve gear;

e) check the tightness of воздухопроводной system lung machine in the collection with a mask on the excessive pressure;

f) check the tightness of воздухопроводной system lung machine in the collection with a mask on the vacuum;

g) check of the serviceability of the lung machine and exhalation valve;

h) check the tightness of systems of the high and reduced pressure;

k) check the pressure of the air in the cylinders (and) and serviceability switch of reserve (where it exists);

l) check of serviceability the signal devices (where it is).

Check № 3

a) each air breathing apparatus is checked, versed on units and parts for inspection, washing, cleaning, disinfection, regulatory and tax according to their technical specifications and operating instructions;

b) inspection of the mask, lung machine, gear, valves, cylinders, switch of reserve air, battery charger socket and, where provided for the design of the machine - signal and life-saving devices;

c) run the repair and replacement of worn parts. Filters, gaskets, valves and all the rubber seals, as a rule, substitute;

d) finished testing equipment air breathing apparatus after its harvesting, management and review № 2.

 

The order and sequence of inspections insulating regenerative respirators.

Operational test

a) test of the mask;

b) verification of the operation of valves of inhalation and exhalation;

с) check of the signal of the device (where it exists);

d) check the tightness of protective breathing apparatus is to be discharged;

e) inspection of the work of excessive valve breathing bag;

f) verification of the mechanism constant supply of oxygen;

g) verification of the work of the lung machine;

h) check the functioning of the mechanism of emergency oxygen supply;

k) the test pressure of oxygen in the tank.

Check № 1

(a) an external inspection of protective breathing apparatus;

b) verification of the operation of valves of inhalation and exhalation;

c) check of the signal of the device (where it exists);

d) check the tightness of protective breathing apparatus in vacuum;

e) inspection of the work of excessive valve breathing bag;

f) check of connections, which are under the pressure of oxygen;

g) verification of the work of the lung machine and mechanism of constant supply of oxygen;

h) check the functioning of the mechanism of emergency oxygen supply;

k) the test pressure of oxygen in the tank.

Check № 2

(a) the cleaning of protective breathing the machine;

b) an external inspection of protective breathing apparatus;

c) verification of the suitability of the regenerative cartridge to work;

d) check the tightness of воздухопроводной system of protective breathing apparatus in vacuum;

e) check the tightness of воздухопроводной system of protective breathing apparatus with gauge pressure;

f) verification of the mechanism constant supply of oxygen;

g) verification of the work of the lung machine;

h) check the functioning of the mechanism of emergency oxygen supply;

k) check the resistance opening the safety valve of the respiratory bag;

l) check valves operation inhalation and exhalation;

m) check the signal of the device (where it exists);

n) the verification of compounds under high pressure oxygen;

o) the test pressure of oxygen in the tank.

Check № 3

a) each of insulating regenerative respirator, audited versed on units and parts for inspection, washing, cleaning, disinfection, regulatory and tax according to their technical specifications and operating instructions,

b) perform dismantling воздухопроводной system with the examination of the mask and the regenerative cartridge for tightness,

c) perform dismantling кислородопроводной system with the degreasing of parts operating under the pressure of oxygen,

d) determination of the suitability of parts (units) to further exploitation, repair and replacement of worn parts (filters, gaskets, valves and all the rubber seals, as a rule, be replaced),

e) finished testing equipment of the isolation of the regenerative unit after its harvesting regulation and inspection № 2 and № 3

English

Официальный дистрибьютор Draeger Safety AG & Co. KgaA, Германия

ООО "Технология для жизни"

Адрес: Офис 406-408, ул.Университетская 80-В, г.Донецк, 83114, Украина

http://www.tfl.com.ua/

тел/факс: 8 (062) 381-80-74

тел: 8 (062) 345-75-80

           8 (062) 345-75-70

email: office@tfl.com.ua

Киевский филиал: Офис 403, ул.Щорса 31, Киев 01133

email: tfl.kiev@gmail.com

Производитель пожарных рукавов

ЧП "Энергопром" 

Адрес: ул.Рудакова 56, г.Луганск, 91020, Украина

http://1energo.prom.ua/

факс: 8 (0642) 33-04-48

тел: 8 (0642) 33-04-48

           8 (0642) 55-50-18

           8 (0642) 33-04-49

           8 (0642) 92-00-10

Контактное лицо: Вадим Смык

тел: 8 (0642) 33-04-48

график работы: с 8-00 до 15-30 ПН-ПТ

 

Пожарное оборудование и инженерная сантехника

ООО "Комплект 01"

Адрес: 105082, г.Москва, ул.Большая Почтовая, д.36, стр.10. - Главный офис и Малый склад

г.Москва, ул.Матросская тишина, д.1а. - Склад оптовых отгрузок 

http://www.komplekt01.ru/

тел: 8 (495) 380-32-79 (многоканальный телефон/факс);

        8 (495) 380-31-08 (многоканальный телефон/факс);

        8 (495) 506-15-08

график работы: с 8-00 до 18-00 ПН-ЧТ

                              с 8-00 до 17-00 ПТ  

 

 

Поставка пожарного оборудования и аварийно-спасательного снаряже

Компания "Пожарный профи"

Адрес: 197342, г.Санкт-Петербург, наб.Черной речки, д.41 

http://www.pozh-profi.ru/

тел: 8 (812) 331-81-95

           8 (812) 496-22-19

           8 (812) 643-26-31

график работы: с 9-30 до 17-00 ПН-ЧТ

email: info@poxh-profi.ru

СТО огнетушителей:

г.Санкт-Петербург, ул.Профессора Попова, д.38

тел/факс: 8 (812) 334-14-75

тел: 8-921-98839-24

          8-988-69-24

 email: Koroleva.sop@inboxi.ru