Are you having trouble finding a specific video? Then this page will help you find the video you need so much. We will easily process your requests and give you all the results. It doesn’t matter what you are interested in or what you are looking for, we can easily find the necessary video, no matter what its focus.
If you are interested in modern news, then we are ready to offer you the most current news reports in all directions at the moment. Results of football matches, political events or world, global problems. You will always be aware of all events if you use our wonderful search. The awareness of the videos we provide and their quality depend not on us, but on those who uploaded them to the Internet. We just supply you with what you are looking for and demanding. In any case, using our search, you will know all the news in the world.
However, the world economy is also a rather interesting topic that worries many people. Quite a lot depends on the economic state of various countries. For example, import and export of any food products or equipment. The same standard of living directly depends on the state of the country, as do salaries and so on. How can such information be useful? It will help you not only adapt to the consequences, but may also warn you against traveling to a particular country. If you are an avid traveler, be sure to use our search.
Nowadays it is very difficult to understand political intrigues and to understand the situation you need to find and compare a lot of different information. Therefore, we can easily find for you various speeches by State Duma deputies and their statements over the past years. You will be able to easily understand politics and the situation in the political arena. The policies of different countries will become clear to you and you can easily prepare yourself for the upcoming changes or adapt to our realities.
However, you can find here not only various news from around the world. You can also easily find a movie that will be pleasant to watch in the evening with a bottle of beer or popcorn. In our search database there are films for every taste and color, you can find an interesting picture for yourself without any problems. We can easily find for you even the oldest and hard-to-find works, as well as well-known classics - such as Star Wars: The Empire Strikes Back.
If you just want to relax a little and are looking for funny videos, then we can quench your thirst here too. We will find for you a million different entertaining videos from all over the planet. Short jokes will easily lift your spirits and keep you amused all day long. Using a convenient search system, you can find exactly what will make you laugh.
As you already understand, we work tirelessly to ensure that you always receive exactly what you need. We created this wonderful search especially for you, so that you can find the necessary information in the form of a video and watch it on a convenient player.
On DAEWOO NEXIA cars produced before 2008 (mod. No. 100), headlight units are used that combine a two-filament low and high beam lamp of type H4, a side light lamp and a turn indicator lamp installed in its own housing.
DAEWOO NEXIA cars manufactured since 2008 (mod. No. 150) are equipped with headlights of a modified shape and design. These headlights use separate low beam (H7) and high beam (H1) lamps, a side light lamp, similar to the lamp of the previous headlight, and a turn signal lamp, also similar to the previous one, but installed in a common headlight housing (the turn signal does not have a separate removable body).
The low and high beam headlights of the DAEWOO NEXIA are turned on by the left steering column switch - the exterior lighting switch - using a relay located in the mounting block in the engine compartment. The control voltage is supplied to the windings of the high beam headlight relay from the exterior lighting switch if it is in the headlight on position. Regardless of the position of the exterior lighting switch, you can briefly turn on the high beam headlights by moving the switch lever towards you.
Fog lights
Some DAEWOO NEXIA vehicles are equipped with fog lights with H3 (mod. No. 100) or H11 (mod. No. 150) lamps installed in the lower part of the front bumper. The fog lights can be turned on using the switch on the instrument panel only when the exterior lighting is on.
Tail lights
The rear lights of the DAEWOO NEXIA car are equipped with brake and side lights, turn indicators, reversing lights, and a fog light.
The rear lights of the DAEWOO NEXIA car produced since 2008 differ from previous lights not only in the shape, design of the base and the location of the lenses, but also in the installation of a baseless W16W reversing light lamp instead of a P21W lamp.
Rear fog light
Rear fog lamps type P21W are installed in the rear lights. The fog lights of the DAEWOO NEXIA can only be turned on using the switch on the instrument panel if the headlights are turned on. When the side lights are turned off, the rear fog light turns off automatically.
Direction indicators
Turn signal lamps are installed in the headlights, rear and side lights. The direction indicators of the DAEWOO NEXIA car are turned on by the left steering column switch (lamp on one side depending on the position of the switch).
In hazard warning mode, the hazard warning switch turns on all direction indicators. The flashing of the lamps is ensured by the alarm relay interrupter.
Electric headlight corrector
DAEWOO NEXIA cars are equipped with an electric headlight corrector, which allows you to change the direction of the headlight beam in the vertical plane depending on the vehicle load.
USEFUL TIPS:
If the headlights suddenly start to shine dimly, and when the turn signal is turned on, the side lamp begins to flash, restore contact between the ground wire and the body.
Make it a habit to regularly change your bulbs (especially your headlights). Over time, the lamp bulb becomes cloudy and the brightness of the lamp decreases. Moreover, this process occurs rather slowly and the driver does not notice the gradual deterioration in road illumination.
Recently, more and more cars are appearing whose headlights shine like a Christmas tree in various shades of blue. All this is called “xenon” and is considered very cool. There is no doubt, xenon headlights, installed as standard on the latest models of foreign cars, illuminate the road much better, and the car looks much more impressive with them. It is not surprising that many are also trying to improve their car, especially since now a lot of “xenon” lamps of various manufacturers (most often Chinese) have appeared on the shelves. Don't buy it cheap - these lamps have nothing in common with real xenon discharge lamps without filaments. These are ordinary lamps with painted glass. The light transmittance of such glass is significantly lower than that of standard lamps; the filaments of fakes, as a rule, are installed out of focus and a headlight with such a lamp, while outwardly effective, illuminates practically nothing, and additionally mercilessly blinds oncoming drivers. In addition, manufacturers of such lamps, in order to compensate for the decrease in luminous flux, increase their power beyond the norm. Often their installation leads to melting of the wire insulation and damage to electrical equipment. And a fire is also possible. It’s better not to buy a “headache” with your money, but buy regular lamps of good quality.
Sooner or later, the bulbs in the taillights burn out. It would seem that it would be simpler - take a new light bulb, suitable for the size of the base and voltage, and install it in place of the burnt out one. However, please note that the rear lights use lamps with the same base, but of different power - 5W and 21W. And this is not an insignificant detail: 5-watt lamps are installed in side lights, and 21-watt lamps are installed in turn indicators and brake lights. Don't confuse them. If you install low-wattage bulbs in your brake lights and turn signals, other drivers simply won't see your signals in inclement weather. And powerful lamps in “dimensions” will greatly disturb drivers driving behind and irritate them. Their attitude towards you will be corresponding.
Malfunctions of lighting and light signaling of the DAEWOO NEXIA car, their causes and solutions
Cause of malfunction |
Remedy |
Individual headlights and flashlights do not light up |
|
Fuses blown |
|
Lamp filaments burned out |
Replace the lamps |
Damage to wires, oxidation of their tips or loosening of wire connections |
Check, replace damaged wires, clean tips |
Low or high beam headlights do not turn on |
|
Lamp filaments burned out |
Replace the lamps |
Switches are faulty |
Replace the steering column switches |
Stop light doesn't work |
|
Brake light switch faulty |
Replace the switch |
The steering column switch levers do not lock |
|
Destruction of lever clamps |
Replace the damaged switch |
Turn signals do not turn off automatically after turning |
|
Damage to the mechanism for returning the turn signal switch to its original position |
Replace the turn signal and headlight switch |
The turn signal indicator flashes at double speed |
|
One of the turn signal lamps is burnt out |
Replace the lamp |
Adjusting the headlights of a DAEWOO NEXIA car
Check and adjust the headlights of a DAEWOO NEXIA vehicle when the vehicle is equipped (with a fully filled fuel tank, a set of tools and a spare wheel).
To adjust the headlights of your DAEWOO NEXIA, you will need a Phillips screwdriver (or a 10mm wrench).
1. Pre-check and, if necessary, adjust the tire pressure to normal.
2. Place the car perpendicular to a smooth wall (for example, a garage) at a distance of 5 m. Place an additional weight weighing 75 kg on the driver’s seat. Mark the screen on the wall as shown in Fig.
The longitudinal plane of symmetry of the car should pass along line 0 on the screen. Rock the car sideways so that the suspension springs self-align.
3. Measure the height of the headlight centers to the floor on your vehicle. This will be the distance h on the screen.
4. Set the headlight adjustment control on the instrument panel to position “0”, corresponding to the load of a car with one driver.
5. Turn on low beam.
6. It is recommended to adjust the direction of the light spot for each headlight separately. Cover the second headlight with opaque material during adjustment. 
7. Open the hood and, on a car built before 2008, use a screwdriver to rotate the gears of the adjusting screws and adjust the position of the light spot for each headlight on the screen horizontally.
8. Adjust the position of the light spot for each headlight on the screen vertically.
9. On a car manufactured since 2008, use a “10” key to rotate the adjusting screws A (vertical adjustment) and B (horizontal adjustment) installed on the back side of the headlight.
NOTE:
Left headlights are shown, right headlight adjustment screws are located symmetrically.
10. The headlights are considered adjusted when the upper boundaries of the left parts of the light spots coincide with line 4, and the vertical lines 1 and 2 pass through the intersection points E1 and E2 of the horizontal and inclined sections of the light spots.
Replacement of low beam, high beam, side light lamps of a DAEWOO NEXIA car
To replace headlight bulbs on a DAEWOO NEXIA, do the following:
1. Open the hood.
2. Disconnect the wire from the negative terminal of the battery. 
3. Remove the low beam lamp cover by turning it counterclockwise.
NOTE:
For clarity, the replacement of lamps on a DAEWOO NEXIA car on a removed headlight is shown.
4. Disconnect the wiring harness connector from the lamp socket.
5. Squeeze the ends of the spring clamp and remove its branches from the hooks on the reflector.
6. Open the latch.
7. Remove the low beam lamp.
WARNING:
8. Insert the new lamp into the reflector and secure it with the spring holder.
9. Connect the block with wires to the lamp socket. 
10. Remove the high beam lamp cover by turning it counterclockwise.
11. Disconnect the power cord from the lamp plug.
12. Disconnect the ground wire from the reflector body.
13. Pull the end of the spring holder out from under the reflector hook.
14. Fold out the holder.
15. Remove the high beam lamp.
WARNING:
Do not touch the lamp bulb with your fingers, as the halogen lamp becomes very hot and greasy stains will cause the bulb to darken. Handle the lamp by the bulb only with clean gloves. If there are still greasy stains on the lamp, remove them with alcohol.
16. Insert the new lamp into the reflector and secure it with the spring holder.
17. Connect the power and ground wires. 
18. To replace the side light lamp, disconnect the wire from the main beam lamp terminal and the ground wire, unfasten the spring holder of the main beam lamp, remove the socket from the reflector along with the side light lamp (the socket is installed with a slight interference fit) and remove the baseless lamp from the socket.
19. Insert a new lamp into the socket and install it in place.
20. Reinstall the headlight covers.
How to adjust headlights Nexia
How to adjust Daewoo Nexia headlights (Where and what to turn) Adjusting Daewoo Nexia headlights, annotation for dummies. In the instruction book for Nexia I read that to adjust the light I have is just like on. How to remove the headlight block on a Nexia N-150. Don’t be too critical) 1) To adjust the light beam of the headlight up or down, you can turn the bolt on the corrector by hand. 2) For the left or right beam option, you will need a long, narrow screwdriver. Or you can remove the headlight and simply twist the bolt with a Phillips screwdriver. We will be glad to see your likes and comments. Subscribe to the channel
How to setup Daewoo nexia headlights(Where and what to turn) Adjusting the headlights of the Daewoo Nexia, annotation for dummies. Don’t be too critical) 1) To adjust the light beam of the headlight up or down, you can turn the bolt on the corrector by hand. 2) For the left or right beam option, you will need a long, narrow screwdriver. Or you can remove the headlight and simply twist the bolt with a Phillips screwdriver. We will be glad to see your likes and comments. Subscribe to the channel
Our group: http://vk.com/tantoa
Yesterday I went to Daewoo dealers to adjust the headlights, including PTF. I’m kind of lazy myself, and I don’t think it’ll work out great on the wall. Adjusting the headlights on a NEXIA from the back of the headlight, after the nut has moved. We adjusted the near, far and PTF on the shield.
I replaced the Chinese light bulbs (these ones) with my own standard OSRAM 55Watt ones. Now I’m riding and smiling, everything is visible))
Let's look at the BEFORE and AFTER photos.
PS the photo shows low beam.
After adjustment on the stand. OSRAM 55 Watt.
Similar news
Before adjustment. Mark the screen on the wall as shown for each headlight horizontally (in the photo. Ketai lamps.
Yak nalashtuvati fari Daewoo nexia (De scho twist)
Yak nalashtuvati fari Daewoo nexia(What to twist) Instructions for teapots. Don't criticize too much)
1) To adjust the light
The light is bad headlights on Nexia.How to fix
The light is bad headlights for Nexia.How to fix? — Project assistance: .
It is better to adjust headlights at night. We install the car on a flat horizontal area at a distance of 5 m from the screen - a light wall of a building, garage, etc. (you can use a sheet of plywood measuring 12m). As it turned out, I had to take out the headlights and adjust the light on the Nexia itself. Tire pressure should be as recommended. We seat assistants in the front seats or place a 75 kg load. How to remove the headlight of a Daewoo without removing the bumper, although this can be done on a Nexia n150. By pressing the front and rear wings in turn, we slightly rock the car to install the suspensions. We measure the distance from the centers of the headlights to the floor and draw horizontal line 1 at this height (see figure) on the screen, and 65 mm below it - horizontal line 2. How to correctly install fog lights on a VAZ 2109. Materials and requirements for installation, process carrying out the work, decide on We draw vertical lines A and B, corresponding to the centers of the headlights, and line 0 at an equal distance from lines A and B. Replacing the headlight on a Renault How to insulate the engine of a Renault Logan car. We set the headlight beam direction control to the “O” position, corresponding to the minimum vehicle load. Cover one of the headlights with a piece of cardboard and turn on the low beam. We adjust the direction of the light beams of the open headlight by alternately rotating the gears of the two adjusting screws with a Phillips screwdriver (at least 125 mm long) through the holes in the upper cross member of the radiator frame.
Headlight adjustment diagram
I spent about 2.5 hours making adjustments and drew chalk on the fence, but it was really worth it! We make the headlights one by one, cover one with a cloth, turn off the PTF.
As it turned out, not only did I drive like a blind kitten, but I also blinded oncoming traffic for six months!
was:
near- shines diffusely forward for a period of 50-120 meters (5-10 meters in front of the car were saved by PTF)
further- illuminates treetops 30-70 meters above the road
Now:
near“illuminates” 10-50 meters in front of the car with a good beam (everything is visible) PTFs capture the sides of the road and the area directly in front of the muzzle of my ship =)
Similar news
further- illuminates 40 - 150 meters ahead, again, with a good beam of light!
I drive and smile
I used this scheme
It is better to adjust headlights at night. We install the car on a flat horizontal area at a distance of 5 m from the screen - a light wall of a building, garage, etc. (you can use a sheet of plywood measuring 12m).
Tire pressure should be as recommended. We seat assistants in the front seats or place a 75 kg load.
By pressing the front and rear wings in turn, we slightly rock the car to install the suspensions.
We measure the distance from the centers of the headlights to the floor and draw horizontal line 1 at this height (see figure) on the screen, and 65 mm below it - horizontal line 2. Draw vertical lines A and B, corresponding to the centers of the headlights, and line 0 at an equal distance from lines A and B.
We set the headlight beam direction control to the “O” position, corresponding to the minimum vehicle load. Cover one of the headlights with a piece of cardboard and turn on the low beam.
We adjust the direction of the light beams of the open headlight by alternately rotating the gears of the two adjusting screws with a Phillips screwdriver (at least 125 mm long) through the holes in the upper cross member of the radiator frame.
We adjust the deflection of the headlight beam in the horizontal plane through the hole in the cross member located closer to the longitudinal axis of the car... 
...by rotating the gear wheel of the adjusting screw on the headlight housing (shown with the headlight removed for clarity).
Adjusting the height of the light beam...
...rotating the gear wheel of the adjusting screw in the electric corrector drive housing.
The upper boundary of the light spot should coincide with line 2 on the screen, and the break point of the beam (the point of intersection of the horizontal and inclined sections) should coincide with the vertical line corresponding to the center of this headlight. Similarly, we adjust the position of the light spot of the second headlight.
Complexity
No tools5 - 30 min
Notes:
For ease of use, the handles, buttons and control devices located on the instrument panel and other additional control panels are marked with symbols of their functional purpose.
Steering column switches Daewoo Nexia N150 mounted on the steering column. The left steering column switch combines switches for the direction indicators, exterior lighting, low and high beam headlights.
Central light switch
To turn on or off the external lighting devices, turn the handle at the end of the lever of the left steering column switch.
The handle has three positions:
1. Exterior lighting of Daewoo Nexia N150 is turned off;
2. Side lights, license plate lights and instrument panel lights are included;
3. The side lights, license plate lights, instrument panel lights, and low beam headlights of the Daewoo Nexia N150 are turned on.
Note:
If the ignition key is in the "IN"- “the steering shaft is blocked” or "I"- “ignition off”, when the driver’s door is opened, a warning sound is heard, reminding you to turn off the lights.
Headlight switch
For turning on the high beam headlights turn the handle of the central lighting switch counterclockwise (turn on the low beam) and press the left switch lever away from you. When the high beam headlights are turned on, the corresponding lamp on the instrument panel lights up blue.
To briefly turn on the high beam headlights, regardless of the position of the central lighting switch, move the lever of the left steering column switch towards you.
When released, the lever will return to its original position.
Turn signal switch
The turn indicators of the Daewoo Nexia N150 are turned on when the left steering column switch lever is moved up or down until it stops. In the upper position of the switch lever the right turn signal is on, in the lower position the left one is on.
When the steering wheel is returned to the neutral position, the left steering column switch lever is automatically returned to its original position and the turn signal is turned off.
Switch block
Front fog light switch
The front fog lamp switch is located on the instrument panel above the headlight beam direction control.
To turn on the front fog lights, press the button with the exterior lights on. At the same time, the indicator in the switch lights up. By pressing the button again, we turn off the front fog lights of the Daewoo Nexia N150.
Rear fog light switch
To turn on the rear fog lights when the front fog lights are on, press the button located on the right side of the instrument panel. At the same time, the indicator in the switch lights up. Press the button again to turn off the rear fog lights.
Note:
The fog lights turn on only when the ignition is on and the headlights are on low beam or when the fog lights are on.
Using rear fog lights at night in clear weather can lead to blinding of drivers of cars moving behind and, as a result, to a traffic accident. Therefore, turn on the rear fog lights only when there is heavy fog.
Hazard light switch
When you press the switch button, all direction indicators and their indicator lamps installed in the instrument cluster light up with a flashing light. Pressing the button again turns off the alarm.
Note:
The hazard warning lights operate in any position of the key in the ignition switch (lock).
Heated rear window switch
When you press the switch button (the ignition key is in position II), the electric heating of the rear window turns on, and at the same time the indicator lamp in the button lights up. When you press the button again, the heating turns off.
Warning:
The heating element draws a lot of current, so to avoid excessive battery drain, turn on the heater while the engine is running and only for as long as necessary to defog the rear window. To avoid damaging the heater filaments, do not use scrapers or other sharp objects, or detergents with abrasive ingredients, to clean the inside of the rear window.
Electric headlight corrector for Daewoo Nexia N150
The electric headlight corrector is designed to remotely change the tilt of the headlight beams in the vertical plane at different vehicle loads. We adjust the direction of the light beams of the headlights by rotating the regulator located on the left of the instrument panel.
Location of the headlight range control
To properly illuminate the road and prevent dazzling drivers of other vehicles, you should combine the mark on the control wheel of the electric corrector with the corresponding marks (numbers) on the block with different loading options:
- 0 — one driver or a driver and a passenger in the front seat;
- 1 - driver and four passengers;
- 2 — one driver and cargo in the luggage compartment;
- 3 - driver, four passengers and cargo in the luggage compartment.
Warning:
Always install the electric headlight leveler in the appropriate position, as blinding the driver of an oncoming car can have the most serious consequences!
