Recommended engine oil for Nissan Pathfinder. Recommended engine oil for Nissan Pathfinder Oil volume pathfinder 2.5 diesel

Oil change for Nissan Pathfinder although a simple matter, it is terribly inconvenient (in particular, replacing the oil filter is difficult due to its location). All you need is:

  • head on "14"(unscrew the drain plug);
  • key on 10" unscrew the hatch in the protection to get to the oil filter;
  • and of course fresh oil (volume and specification depend on the engine), as well as a new oil filter and preferably a new copper ring on the drain bolt (although often it is changed only after several oil change cycles).

When to change and what oil to fill in Pathfinder

Oil change interval set per 10,000 km mileage or once a year. At the same time as the engine oil, the oil filter is also changed.

Refueling volume engine 2.5 is 6.9 liters new oil (according to other sources - 7,5 ). For engine 4.0 this volume is 5.1 liters. It is recommended to fill in genuine Nissan oil with a viscosity of SAE 5W40 or 5W30.

  • The number of the 5 liter NISSAN 5W40 oil can is KE90090042R. Canister of the same oil for 2 liters - KE90090032R.
  • The number of the original oil filter for the 2.5 engine is 15208BN30A. Analogues: MAHLE C236, MANN FILTER W92048, BOSCH 986452003, PURFLUX LS149 and others.
  • The number of the original oil filter for the 4.0 engine is 152089F600. Analogs: MANN FILTER W671, MAHLE C1052, BOSCH 986452061, ALCO FILTER SP1002 and others.
  • The number of the original drain plug gasket for the 2.5 engine is 013511204M.
  • The number of the original drain plug gasket for the 4.0 engine is 1102601M02.

How to change oil in Pathfinder

Before starting the procedure, the engine is always warmed up for 5-10 minutes.

To make it convenient to get to the drain plug and oil filter, it is better to install the car on a viewing hole.

In general, the process is simple, many people know how to change the oil without any instructions, however, I think it will be interesting for the owners to see it clearly in the photo to look through the slides.

We buy an oil filter and a washer for the drain bolt.


We get the necessary tool for replacement. In addition to the keys, also take a suitable container for draining the oil (7 liters).


Open the hood and slightly open the oil filler cap (so to speak, depressurization of the system).


With a 14 spanner wrench, unscrew the cork from the pan (after substituting the container).


When unscrewing the bolt, be careful, because it is unforgettable that the oil temperature is about 80 degrees, you can get burned (it's better to do everything with gloves).


We try not to lose the copper ring in case you forgot to buy it to replace it with a new one, or if it is included, then do not forget to change it before screwing the drain bolt back (the oil drains for about 15 minutes).


We tighten the bolt, but without fanaticism.


Now we are looking for where the oil filter is located. In this case, it is behind a protection hatch. Therefore, in order to get to it and unscrew it, you will need to unscrew two bolts.

For a scheduled oil change and consumables, it is not necessary to go to a service station. This is not a difficult operation, you can do it yourself at home. Enough to have a viewing hole or a regular jack.

What oil to fill in and the frequency of replacement

Viscosity SAE 5W40, 5W30 is recommended for use for the Pathfinder car engine.

Replacement Part Numbers

  • Canister for 5 liters of oil Nissan 5W40 - KE90090042R;
  • Canister for 2 liters of oil Nissan 5W40 - KE90090032R;
  • Original filter for 2.5 engine - 15208BN30A; Analogs are: PURFLUX LS149, MAHLE C236, BOSCH 986452003, MANN FILTER W92048, etc.
  • Original filter for engine 4.0 - 152089F600. Analogs are: ALCO FILTER SP1002, MAHLE C1052, MANN FILTER W671, BOSCH 986452061 and others.
  • Original drain plug gasket for 2.5 engine - 013511204M;
  • The original drain plug gasket for the 4.0 engine is 1102601M02.

Step by step instructions for changing the oil

Express test of oil quality in your engine

With a simple test, you can find out about the quality of the oil that protects the engine of your car at this moment. To do this, remove the probe and drip a drop from it onto a sheet of paper. Leave it for 10-15 minutes and then compare the resulting drop pattern.

A little working

Worked

Working with fur. impurities

Working in udov. able

Working in bad. able

Non-working

From an overheated engine

Engine repair is a very costly and unpleasant event, therefore, in order to extend the life of the power unit and protect it from overheating, it is better to use the recommended Nissan Pathfinder engine oil. Any deviation from the manufacturer's recommended oil parameters may impair the performance of the engine or lead to its breakdown.

Gasoline motors

In the Nissan Pathfinder operating instructions, the car manufacturer recommends lubricants that meet the following parameters:

  • original Nissan motor fluids;
  • according to API classification - oil type SH or SG;
  • liquids with the designation "Energy Conserving II", which means: capable of saving the consumption of the fuel mixture;
  • having the inscription Certification Mark, indicating the quality mark according to the API system;
  • the viscosity of the oil is selected according to scheme 1;
  • the approximate volume of engine oil required for replacement is 3.7 liters with the filter device and 3.4 liters without the oil filter.
Scheme 1. The influence of ambient temperature on the selection of viscosity parameters of the lubricant.

Car oil 5w - 30 is used at temperatures from -30 ° C (or less) to +40 ° C (or more), 10w - 30 is used if the air temperature is above -18 ° C.

Nissan Pathfinder R51 2004-2014

According to the manual, the recommended engine oil for the Nissan Pathfinder is selected according to the type of power unit.

Car engines running on gasoline

The Nissan Pathfinder manufacturer recommends filling in motor oils with the following parameters:

  • genuine Nissan lubricants;
  • oil quality class according to API classification - SG, SH, SJ or SL;
  • in accordance with ILSAC standards - GF-1, GF-2, GF-3, GF-4;
  • according to ACEA classification - A2;
  • the volume of the required lubricant when replacing, taking into account the oil filter, is 5.1 l, excluding the filter unit - 4.8 l;
  • the viscosity of the motor fluid is selected according to scheme 2

Diesel power units

  1. Vehicles equipped with a diesel particulate filter (DPF):
  • according to ACEA classification - C3;
  • lubricants with the designation "LOW ASH", which means low ash;
  • viscosity according to SAE 5W-30;
  • high temperature viscosity parameter at high shear rate is HTHS3.5.
  1. Cars without diesel particulate filter (DPF):
  • in accordance with the classification of API - CF-4, it is forbidden to use - API CG-4;
  • the viscosity parameters of the lubricant are selected according to scheme 2;
  • according to ACEA standards - B1, B3, B4 or B5.

The volume of engine oil required for replacement is:

  • 6.9 liters including oil filter;
  • 6.4 l excluding filter unit.
Scheme 2. Effect of temperature on the viscosity characteristics of the lubricant.

According to scheme 2, the following types of lubricant must be poured:

  • under temperature conditions from -30 ° C (or less) to +40 ° C (or more), pour 5w - 30;
  • if the temperature is above -20°C apply 10w - 30; 10w - 40; 10w - 50;
  • when the thermometer reads more than -15 ° C, 15w - 40 is used; 15w - 50;
  • if the air temperature is more than -10 ° C, use 20w - 40; 20w - 50.

The manufacturer indicated that it is preferable to pour lubricating fluid 5w - 30.

Nissan Pathfinder R52 from 2014


Gasoline motors

  • original NISSAN Ester Oil, which helps to reduce the consumption of the fuel mixture;
  • according to API classification - SL, SM or SN;
  • in accordance with the ILSAC classification - GF-3, GF-4, GF-5;
  • according to the ACEA system - A1 / B1, A3 / B3, A3 / B4, A5 / B5, C2 or C3;
  • the selection of the viscosity of motor lubricant is carried out according to scheme 3;
  • the approximate volume of oil that will be required for replacement is 4.8 liters with the replacement of the oil filter and 4.5 liters without changing the oil filter.
Scheme 3. Selection of the viscosity characteristics of the lubricant depending on the temperature of the region in which the car will drive.

The interpretation of scheme 3 is similar to scheme 2, except for the oil 5w - 40 used if the temperature range is from -30 ° C (or less) to +40 ° C (or more). The manufacturer recommended pouring 5w - 30 car oil.

Conclusion

The recommended engine oil for Nissan Pathfinder is capable of protecting the internal elements of the engine from abrasion, overheating, corrosion, and soot deposits. The engineers of the manufacturer of the machine select the class, type, viscosity of the required lubricant, which ensures stable and long-term operation of the engine. Engine oils suitable for a particular type of engine have the machine manufacturer's approvals marked on the lubricant canister.

The manual also indicates the temperatures at which it is necessary to apply a lubricant of a certain density. Thick liquids are recommended for summer, more fluid liquids for winter, all-weather liquids are used in a certain temperature range. Please note: the instructions do not contain recommendations regarding the base oil base (synthetic, semi-synthetic or mineral), but it must be taken into account when choosing a motor lubricant.

Read also