It is very important to know and follow all traffic rules if a person gets behind the wheel of a vehicle. Special signs are installed on the roads, according to which it is necessary to move in the general flow of other cars.

The Main Road road sign is known to all motorists because it will have advantages over others. But at the same time it raises a lot of controversy and questions.

If you imagine a main road sign, its picture will look like a diamond-shaped sign, and have a white frame, and yellow inside. Among other signs, the main road sign is the only one with such an image. If you look at his photo, it will become clear that he is visible from afar, even if you move in the oncoming lane. In the traffic rules it is designated as 2.1.

Since this sign is a priority sign, it means that drivers will have priority on this section of the road. Motorists from other directions, on the contrary, must give way.

But why do disagreements arise when, it would seem, everything is clear? If this sign appears, it means that this particular road is the main one. Misunderstandings can occur when the roadway changes direction.

As a rule, along with this sign, additional signs are used that will show the direction of the turn, that is, in which direction the main road will continue. It is depicted schematically with a black outline on a white background. This is a kind of layout of an intersection, where the direction of the main road is marked with a thick line. The rest remain for secondary purposes. These additional indicators are installed only together with a certain sign; they do not act as an independent element.

How to choose the main road?

It is necessary to mark the main road in those places where there are uncontrolled intersections or entrances from adjacent roads. And the main need of this sign is to regulate the order in which vehicles should pass such an intersection. And the main road will have an advantage over the others.

When a traffic light is installed at the intersection, or a traffic controller is working, then the effect of this sign is canceled. An additional sign may be installed under such a sign, which will indicate the direction of movement. And thanks to it, the motorist will be able to determine in what order vehicles should cross the intersection.

For your own safety, when approaching an intersection, it would be better to reduce your speed and assess the situation as a whole at the intersection. Having determined the advantage of moving in each direction, if possible, continue your journey further. Simple manipulations can sometimes save you from unpleasant situations.

Who will have the advantage?

On the road you can often find that the advantage sign will be accompanied by a certain trajectory of movement.

For example: The road will turn left, so the advantage will be on it. In this case, it is important to take into account that when a motorist wants to continue driving straight, he will also have priority over other road users.

Common traffic situations:

• When there are working traffic lights at an intersection where a priority sign is installed, you should first of all focus on them. Signs here are necessary in case the traffic light is not functioning, this happens, for example, at night.
• If no signs are installed when approaching an intersection, then the priority direction will be determined by the road surface, or by the right-hand rule.

Punishment for violation

Rules are made to be followed. This is especially true for behavior on the road. After all, often, driving not according to the rules creates emergency situations in which people can get hurt. And for any violation of the rules, the motorist will be given a warning or other punishment. These could be penalties. So is the deprivation of a driver's license.

If a sign indicating the main road is not observed, that is, when a motorist does not give another road user the right of way, he is subject to a fine of 1,000 rubles.

Always, even when driving on a main road, it is better to make sure that other motorists give way. Otherwise, an accident may not be avoided.

Territory where the sign is valid

In this case, it is impossible to specify a specific coverage area of ​​such a pointer. This sign will be valid until the nearest intersection or the corresponding installed signs. When the main road continues after the intersection, such a sign will simply be installed again.

When it is necessary to inform drivers that the priority of the main road is no longer valid, another sign is installed. It looks the same as the previous sign, with the difference that it is crossed out by four thin black lines - End of main road 2.2.

The end of the main road sign is usually installed before the intersection of roads that are of equal status. If you re-read the traffic rules, it becomes clear that the main road will remain in effect until the place where the sign about its cancellation is installed. Although in life this does not always work out.

Signs should be placed under the sign to inform the motorist that the direction of the main road has changed. When they are absent, this means that the main direction is considered to be straight ahead.

These marks are designed to help the driver drive safely and not pose a threat to other road users.

One of the main inanimate assistants to the driver are priority indicators. They tell who has the advantage on the roadway, who has the right to pass first and, therefore, on whose side the law enforcement officers are most likely to be in the event of an accident.

One of the most common marks is the "Main Road" sign.

Number

In the set of traffic rules it is listed under number 2.1.

Appearance

The road sign “Main Road” is easy to recognize among others. It is made in the shape of a rhombus. The inside of this sign is yellow and has a white frame.

Coverage area

The “Main Road” sign applies to the section of the route up to the first intersection along the route.

However, sometimes, to make drivers more confident, a sign is also installed on the roads, indicating the end of the coverage area of ​​the advantage. It looks like pointer 2.1, but has the number 2.2 and the diamond in this case will be crossed out.

the main road

Now let's talk about what it means and what advantages it provides to the motorist.

What is considered the main road?

However, the rules also state that the main road is any paved roadway in relation to the adjacent dirt road. In this case, placing a sign defining priority is not necessary.

How to behave on the main road?

You need to remember that on this section of the road you have an advantage over those moving on secondary roadways. However, this does not mean that you need to rush headlong, knowing about your advantage, ramming everyone and everything.

You need to remember that road situations vary. Sometimes you need to let the other car complete the maneuver. In the end, do not forget that not all car enthusiasts can boast a level of attention comparable to yours. And some owners are even poorly versed in the types of road signs.

Additional signs

Traffic light

It must be remembered that if the “Main Road” sign is installed next to a traffic light, then the relevant settings will be those provided by the light controller. In this case, road markers begin to operate only if this intersection becomes uncontrolled (when the traffic light is turned off or its blinking yellow light).

If a yellow diamond is installed near the road in splendid isolation, it means that the main road goes straight. However, there are markers that indicate where the priority lane turns.

Such signs are made in the form of white squares. They show a drawing of an intersection, and the main road is highlighted with a “thick” black line.

If you are going to drive through an uncontrolled intersection with a “Main Road” sign and an indication of its turn, but cannot miss a car that is also moving on the priority roadway, remember the right-hand obstruction rule. The driver whose car is such a hindrance for the other will have an advantage.

Interaction with a pedestrian crossing

It would be useful to note that even a car moving on the main road must be stopped before the zebra crossing. Pedestrians crossing the roadway at an unregulated crossing always have an advantage over motorists.

Signs - “synonyms”

The sign marking the main road does not always look like the familiar yellow diamond. Every driver needs to know and remember about these marks. Since they are installed infrequently and mostly outside the city.

Therefore, the unexpected appearance of such a sign sometimes confuses motorists. These are pointers numbered 2.3.1 onwards. They are called "Minor Road Intersection Signs" or "Minor Road Junction Signs".

Appearance

These marks appear as white triangles with a red frame. A road branch is depicted inside the triangle. The main road on it is highlighted with a “thick” line. The secondary roadway looks noticeably thinner.

Opposite signs

Give Way

There is one pointer that can be contrasted with the 2.1 label. This is a "Give Way" sign. It means that the driver is moving on a roadway that is not endowed with any right of way, and he should let other road users pass before passing the intersection.

It looks like an inverted white triangle with a red frame.

Sometimes a red octagon is installed along with it, on which STOP is written in white letters. This is a sign called “No driving without stopping.” This means that a driver approaching an intersection must stop before continuing. even if it seems to you that there are no cars around. There is a fine for violating this requirement.

Additionally

Primary and secondary traffic direction indicators can also be installed with such a mark so that drivers can better understand which direction the traffic has priority.

Sometimes the driver has priority not only at an intersection, but also on a straight road that does not intersect with any roadway. Priority signs are also installed there. But others.

These signs are called "Give Way to Oncoming Traffic" and "Give Way to Oncoming Traffic." They mean that a motorist moving in the main direction has the right to pass a certain section of the road first.

Most often, such signs are installed on very narrow sections of the road where only one car can fit.

If there are no signs

We know that in the absence of signs, an uncontrolled intersection is crossed according to the principle of “interference on the right.” However, what to do if a car is moving from each of, for example, four directions? After all, for each of the machines there is an obstacle on the right in this case.

This is one of the nonsenses of traffic rules. The fact is that this situation is not regulated in any way by road rules. You can drive through such areas as you wish. However, it is better to do this carefully.

Crime and Punishment

Violation of the requirements stipulated by priority signs is punishable and is called “failure to provide an advantage.”

This is considered a serious and dangerous violation. But, however, the rights are not taken away for him. However, a monetary fine is guaranteed to the “author” of the violation. However, the amount of this penalty will depend on the city in which the incident occurred.

But it would be worth noting that failure to comply with priority very often becomes the cause of minor or serious accidents. Therefore, because of disobedience to signs, drivers often have to lose much more valuables than the money spent on paying fines.

A monetary fine is provided for violating the requirements of priority signs.

That's all you need to know about the Main Road tag. Knowing the rules is good, but driving by the rules is even better. However, do not forget that, armed with knowledge of your own priority, it is not always possible to cross the intersection without collisions.

So remember that being aware and aware that other drivers may be breaking the rules is your best friend when driving.

The main road sign belongs to the priority category. As a rule, it is installed at intersections to indicate the main road. Many drivers find it difficult to understand the principles of operation of this sign and determine its boundaries. Having a driver's license does not yet indicate a motorist's ability to understand situations on the road and make decisions. Let's learn how to recognize main road signs, what they mean and how to follow them correctly.

Since the road sign indicating the main road is in the group of priority ones, it would be useful to understand what their essence is. The group is relatively small, but at the same time it has no less importance in traffic rules than a warning one.

Which signs are priority:

1. Main road – defines the area where the right of way is provided. Used at intersections without regulation.
2. End of main road sign – used to indicate the end of the main road.
3. Intersection with a minor road – informs you about the intersection of your road with a minor road at the next intersection.
4. Junction of a secondary road - its meaning coincides with the previous sign. The difference lies in the adjoining of the road to yours from one of the directions.
5. Give way - do not interfere with the movement of motorists moving on the main road.
6. Driving without stopping is prohibited - analogous to the sign of giving way. Requires you to stop before crossing an intersection.
7. The advantage of oncoming traffic is that it is installed on narrow parts of roads. The sign requires you to give way to motorists in the oncoming lane.
8. Advantage over oncoming traffic, on the contrary, provides the right of passage on a narrowed road. But if oncoming cars have already entered the lane, you need to let them pass.

Now let's take a closer look at what a secondary and main road is, and how to understand the sign that marks it.

The “main road” is manufactured in accordance with GOST and has the appearance of a yellow diamond. The borders of the diamond are made in white and have the same width. Outwardly, it is known to many people, since it is quite often found in cities.

This is what the picture of the “Main Road” sign looks like:

When placing a main road sign, the distance to the starting point of the action is taken into account. This means that it is placed immediately before the intersection with the main road.

The repetition of signs before subsequent intersections is due to the actions of signs indicating a yield, intersection or junction. They are installed in front of the exit point from adjacent streets. They do not indicate priority, but only ask to give way. The main sign is duplicated in order to supplement information about the road.

Instead of repeating a priority road sign, a junction sign is often used. It is placed at some distance from the intersection. That is why this combination is more often used outside populated areas.

By the way, within the city limits there must be a duplication of the “Main Road” at every intersection. This is due to the coverage area that is listed at the installation location. If the sign is located behind the intersection, then it is valid throughout the journey. The end of the main road is indicated by a corresponding sign (2.2). But we must remember that this does not make the road secondary. Only the intersection of equivalent roads is determined.

The concept of a main road is established by the definition of traffic rules. According to the law, the main road is a section of the roadway on which priority of passage is established relative to secondary roads. A secondary road is a road adjacent to or intersecting the main one. These are all kinds of access routes, alleys, driveways and other routes.

As a rule, the main road is marked with specially designated road signs. And also the main part is the part that has a hard coating in relation to the primer.

A priority sign installed in front of an intersection gives the right of priority passage only at that intersection. It is often duplicated at subsequent intersections. Therefore, to determine the coverage area, another sign is installed - a crossed out yellow diamond, which means that the main road ends, but it is not placed in every case.

When there is an intersection after a crossed out sign, according to the rules it is considered equivalent. In this case, the right of passage is determined by an obstacle on the right or by the surface of the roadway. If the road is covered with asphalt and wide, it is the main one, and if it is covered with a primer, then the driver must give way when driving along it.

The end of the main road sign, combined with a yield sign, means that the motorist is obliged to allow other drivers to pass.

It is known that priority signs cannot prohibit any actions by drivers, but only indicate who has priority when driving through uncontrolled intersections. But the main road sign, installed outside populated areas, prohibits standing on this section. That is, you cannot stop in the middle of the highway for personal needs, the only exception being emergency situations. In case of violation, you will face administrative punishment. Therefore, wait until parking spots appear on the way and park calmly.

It is possible to install a sign together with a sign indicating the direction. This is done where equal and unequal intersections intersect. This combination also regulates the movement of pedestrians and is installed together with the designation of a pedestrian crossing. When approaching such intersections, you must slow down in advance and be more careful. The absence of a direction sign indicates the straightness of the road.

Many drivers find it difficult to organize their actions when changing direction. The fact is that when they see a sign defining the main road, they assume the right of way. But what to do in a situation where two motorists standing on opposite sides of the intersection believe that they have the right to pass?

How to act when changing the direction of the main road at an intersection:

1. When moving, think not only about yourself, but also about other motorists. Take a closer look at the addition - plate 8.13, indicating the direction.
2. Visually position the sign in the center of the intersection, then you will see that the wide stripe shows the priority road, and the narrow stripes show the secondary road.
3. Having excluded the thin stripes “in the head”, leave only the main part in mind. Then the second participant in the movement and you will act according to the rule of interference on the right. The one who has no obstacle starts the movement.

In the same way, you can mentally divide the site into two halves for travel.

You can only move at a roundabout intersection in a counterclockwise direction. It is indicated by a blue circle with arrows. There are dividing stripes on the ring. Additionally, the area is regulated by other signs, for example, or “driving without stopping is prohibited.” This combination of symbols indicates that the driver already in the circular lane has the advantage.

Sometimes the above signs are supplemented with a yellow diamond - indicating the main road. It is placed along with a direction sign. It depicts the entire ring or part of it, indicating where the priority road begins its operation.

The part of the circle depicted on the sign must be remembered, because this is where the main road ends and the driver at the intersection gives way to those entering, according to the rule of interference on the right.

If the intersection is controlled, this greatly simplifies the driving process. The installed traffic light works the same as at a regular intersection - red prohibits, green allows through.

The main thing is, when entering the roundabout, decide in advance which lane you will occupy. It depends on which direction you plan to leave the intersection. The traffic rules establish the entry rule - from any lane of the adjacent road.

Conditions for selecting the correct band:

• if you are going to leave the circle to the right or move straight, choose the lane on the right edge;
• if you plan to make a left turn from the roundabout or turn around in the opposite direction, take the lane on the left;
• when the number of lanes is three or more, the lanes in the center are occupied when moving through the ring along a straight path.

It is a mistaken belief that you need to turn left when entering the roundabout. It is required to use the right one not only when entering, but also when leaving. A left turn signal is only required when changing lanes or making a U-turn. Turning on the turn signals is not required when crossing the ring.

Remember that any violation of traffic rules is subject to appropriate punishment. Violation of the requirements of a main road sign and failure to provide an advantage to other road users faces a fine under the Code of Administrative Offenses of the Russian Federation in the amount of 1,000 rubles.

If the traffic police officers on duty notice such a violation, they will certainly draw up a report on you. It is good if this maneuver does not entail the creation of a dangerous or emergency situation. Then the penalty may become larger, and this is in addition to the costs incurred in the event of a possible accident.

Such violations are more likely to lead to an accident. Therefore, before driving along the main road, you need to make sure that other participants give way to you from all adjacent roads. This is the only way to avoid a collision and pass through the intersection unhindered.

Even when you follow the rules and move in the right direction, it is important to remember that a motorist driving on the secondary road could easily make a mistake or not know the rules at all. You need to be completely sure that they have given way to you and only then continue moving.

Only responsibility and a sober mind will allow you to drive a car safely. The main thing is not to forget that there are other road users who, in turn, can ignore road signs.

Nuances

Drivers often have different opinions about driving under the “Main Road” sign. This is due to the fact that each specific situation is assessed in its own way.

For example, some motorists believe that the sign is only valid until the nearest intersection unless it is followed by a duplicate. It is difficult to determine whether this is true or not. Based on practice, the priority part of the road ends at the intersection at the location where a separate sign indicating the priority of traffic is installed. But the rules say that without clarifying designations it does not cease its action and continues in the direction of the intersection.

Remember that the “Main Road” sign is installed mainly on unregulated parts of the road, and if there is a traffic light, it stops working.

There are cases when, instead of a sign, a red triangle is placed. Moreover, this is a fairly common situation. The driver must be able to “read” additional signs and identify secondary and main roads.

In the rules, these clarifying signs have certain serial numbers (2.3.2. - 2.3.7). Remember them and study them in detail so that in the future there will be no unclear situations in the process of determining the advantage on roads. It doesn’t take long to study them and it’s not difficult, but you will avoid fines for violating road signs.

Traffic regulations are the bible for motorists, but sometimes simple and understandable warnings can cause a lot of controversy and difficulties while the car is moving. Let's talk about a sign that everyone, even a child, knows, but do not underestimate its importance and simplicity; perhaps the most common one on the road, the “Main Road” road sign, contains many pitfalls.

It is classified as a priority designation, which regulates the priority of a vehicle’s entry into an intersection that is not additionally regulated (by a traffic light or a traffic controller).

It is important and raises many questions for both beginners and experienced drivers. A seemingly simple meaning can be controversial in certain circumstances. The most difficult thing to understand is the effect of the rule in places where the roadway changes direction or the zone of its validity ceases. Let's try to figure out these and many other questions.

How is the Main Road sign depicted?

The sign is a yellow diamond-shaped plate framed by a white frame. He is the only one with a similar shape and this is not without reason. It can be recognized from afar only by visually observing its outline, even from oncoming traffic.

As a supplement, they use signs indicating the direction and turn of movement, there are several of them, as well as other explanatory marks.

On a white background, a black outline schematically depicts a mini-model of an intersection, where a thick line indicates the main direction, and a regular line indicates the secondary direction.

Typically, such explanatory boards are not used independently; they always cooperate with the main road sign and nothing else.

Which roadway is given priority?

The mark is installed along the traffic, which has priority over other crossing roadways. This type of sign is usually located at unregulated intersections or entrances to adjacent territories. Its task is to regulate the order of entry or crossing of an unregulated intersection.

If the junction is equipped with a traffic light or a traffic controller is assigned to it, the priority action is canceled. A sign (8.13) may be installed under the sign, which indicates the direction of movement. This information is necessary so that the vehicle driver can easily determine the order of entry to the intersection.

Experienced motorists are advised to slow down when approaching an intersection and pay attention to the right angle in relation to the traffic. If there is no sign, then you need to look at the opposite left corner, then to the corner after the roadway. These manipulations will help you accurately understand the situation in this area and understand which routes you need to take in turn. In simple terms, it is worth assessing the situation at the entire intersection and paying attention to the priority of each of the traffic participants at this intersection.

If there is no main road sign

In populated areas, the “Main Road” priority sign is installed before each intersection. But what to do if this is not installed? Markings directly on the roadway (on the surface), as well as the location and order of roads adjacent to the main one, will come to the rescue.

You need to pay attention to the coating. So, for example, the main roadway will be an asphalt roadway in relation to a dirt or gravel roadway, or any roadway in relation to adjacent exits from the territories. The entrance to the territory or residential area will never be the main roadway.

Important ! Even if the surface of the road, which is a secondary one or an exit from the territory, is made of hard material: asphalt or concrete, it will still not have the status of the main one or be equated to it.

Features of choosing an installation location

The structure is installed in advance on a stationary pole or above the roadway on an overpass or arch, that is, a warning is installed before entering the intersection, taking into account the necessary distance for the driver to take measures and decisions while driving along the roadway. The notification is located at each intersection, that is, intersection. This precaution is used to ensure that the motorist is not misled by other warnings.

You may encounter the following signs along the way:

• "Give Way";
• “Adjoining and crossing a secondary road.”

They are installed at the intersection of main and secondary roads. However, these signs indicate only a temporary action that applies only to this interchange. If, for example, there is a give way sign on the corner, then this means only one thing - you should not interfere with traffic traveling along a secondary road, but in no case should it be the end of the main road.

The action does not apply to pedestrians and in residential areas, despite the fact that people are also road users. There are also cases when a driver, after an accident, complains that the pedestrian did not give way.

As a substitute for "Main Road", one form of the "Main Road Junction" sign can sometimes be seen. It is installed in advance, so in city conditions it is difficult for motorists to navigate this case. This combination is more often used outside the populated area.

Outside the city, the main road sign is not duplicated and is only canceled by the corresponding signal. Outside the city, a similar priority is given in areas of complex junctions.

It is also worth remembering that if the road is designated as the main one in a suburb, then parking on this section of the road on the roadway is strictly prohibited. Permission to operate is a cancellation sign or a valid parking and rest area sign.

Area of ​​operation of the Main Road sign

In fact, the combination does not have a specific area of ​​​​action: it only establishes priority in the place where it is located. That is why it is duplicated at every intersection. To cancel priority, a main road cancellation sign is used. However, this does not mean at all that, while the roadway is not the main one, such a sign states the fact that ahead there is an intersection of roads of equal status.

The traffic rules state that priority applies to the place where it is canceled, but in practice this is not always the case.

There are often signs placed under the sign informing the driver of the change in direction of the priority road. If this sign is absent, then the main direction is straight.

As a rule, it is those intersections where the priority changes direction that cause difficulties. The peculiarity of the situation lies in the combination of two problems: entering an intersection with equivalent and unequal directions. By the way, the rules for driving through an equivalent intersection can be seen in this video.

In this case, it is worth considering not only the signs located directly in front of the car, but also those installed at the intersection as a whole, at all its corners and directions. As mentioned above, only a complete analysis will help you make the right decision. Don’t forget about the “golden rule of the driver” - obstacles on the right.

In today’s article we will discuss the “Main Road” sign (2.1), which raises many questions among both beginners and motorists with decent driving experience. As a rule, the most difficult thing for them is to figure out exactly how a given sign works in places where the road changes its direction, and also to determine where its coverage area ends. We will consider these and some other topics related to the mentioned sign in more detail.

Which section of the road is indicated by sign 2.1

The "Main Road" sign is one of those that indicate priority. It is installed on a road that has an advantage over the roadway crossing it. And they do this, as a rule, in places where the intersection is not regulated, or there is an entrance from such a section of the road to the intersection.

In other words, the sign described determines the order of crossing (by the way, the traffic light and the traffic controller cancel the effect of this sign). An additional sign (8.13) can be installed underneath it, indicating in which direction the main road goes, and the driver must take this into account to set the order of crossing the intersection.

What does a sign indicating a main road look like?

The road on which you must yield to traffic is indicated by a sign in the form of a yellow diamond in a white frame. The “Main Road” sign has this shape for a reason; it has no analogue, so the sign is easy to spot at any section of the intersection, even from the rear side. And this will help the driver correctly determine the order of passage through a difficult section of the road.

For greater safety, experienced drivers are advised to slow down when approaching an intersection and carefully examine its right corner. If there is no sign, look at the left corner, which is located closer to the person driving, and then at the one further away. This will help you accurately navigate and understand whether you should give way.

How can you determine which road is the main one if the sign is not installed?

In every locality, the “Main Road” sign, a photo of which you can see in this article, is installed in front of intersections. But let's also clarify how you can determine the main road if this sign is not there?

In such cases, both the road surface and the location of adjacent roads will help you out. Only the one with a hard surface in relation to the unpaved ones, or the one that is adjacent to exits from nearby territories, will receive the main status.

By the way, keep in mind that even if there is a pavement on the secondary road in the area adjacent to the intersection, it still does not become equal in importance to the one that crosses it.

Sign installation location

The “Main Road” road sign is placed taking into account the distance to the place where it begins to operate. That is, this sign can be installed immediately before the intersection, which will be subject to this restriction.

The description is repeated before all intersections. This precaution is necessary due to the peculiarities of the operation of the signs “Give way” (2.4), “Intersection ...” (2.3.1) or “Adjacent to a secondary road” (2.3.2 - 2.3.7), installed before leaving adjacent side streets. All of the listed signs do not inform that the road being crossed is the main one, but only require you to give way with or without a mandatory stop. In order to supplement the information, sign 2.1 is duplicated.

By the way, instead of the once again repeated “Main Road” sign, one of the varieties of the “Adjacent to the Main Road” sign is sometimes used. But taking into account the fact that it is installed not directly in front of the intersection, but at a distance from it, this is quite difficult to do in urban conditions. Therefore, this combination is used more often not in populated areas, but behind them.

Area of ​​operation of the "Main Road" sign

In populated areas, by the way, duplication of this sign is required before each intersection also because in fact it does not have any coverage area other than the installation location, because it suggests priorities only at the intersection where it is located.

If the sign is installed at the beginning of the road (namely behind the intersection), then its effect is extended to the entire section of the road. And where the road ceases to be the main one, sign 2.2 is installed indicating this. By the way, remember that this sign does not immediately turn the road into a secondary one, it makes it clear that in front of you there is an intersection of equivalent roads.

How does the “Main Road Changes Direction” sign work?

If there is no sign under the sign, it means the priority road is going straight ahead. In cases where its direction changes, an additional sign is installed.

As experienced drivers confirm, it is most difficult to plan your actions at those intersections where the direction of the main road changes. This section of roads combines problems of two types: the intersection of equivalent and unequal intersections. And the main mistake of motorists in such cases is that they take into account only those signs that they see, without thinking about other corners of a given intersection (we have already discussed this above).

Imagine the situation when you are at an intersection with a changing direction of the priority road. Both you and the driver standing, for example, on the right before the intersection, see the same “Main Road” sign, which gives you priority in traffic! And this is usually discovered only later, after the accident! So what is the right way to act in such conditions?

Algorithm for driver action in case of changes in the direction of the priority road at an intersection

• When at such an intersection, do not forget to think about all its sides and be sure to take into account sign 8.13, which will show the direction of the main road.
• You can mentally place this sign in the center of the intersection, and then a wide line will show the main road, and two narrow lines will show the secondary ones.
• Having temporarily erased the secondary ones from your consciousness, you must remember the main area. Then both you and the driver on the other half of the main road must act according to the “Interference on the right” rule.
• Naturally, the one who does not have such an obstacle will move first.
• And only after the cars leave the main area, the vehicles on the secondary roads begin to move in the same pattern.

Please note that in this way a difficult intersection can be divided into two symmetrical and easy-to-traverse halves.

Sign violation

Remember also that if the driver violates the requirements of a road sign, namely, by failing to give priority to a car at an intersection, such actions are qualified in accordance with Article 12.13 of the Code of Administrative Offenses of the Russian Federation and are punishable by a fine of 1,000 rubles. And in case of driving where it was prohibited without stopping, the driver is punished under Art. 12.16 Code of Administrative Offenses of the Russian Federation with a warning, or he will be fined in the amount of 500 rubles.

Get yourself a table of traffic police fines, which will give you the opportunity to navigate the degree of punishment for any violations of the rules.

Advice for those who enter an intersection on what is considered the main road

And finally, I would like to convey to those who approached the intersection, having passed the “Main Road” sign: please note that drivers who are at that moment on a secondary road do not remember the rules of the road!

Don't forget this for a minute and don't try to cross the intersection right away. First, stop and make sure that they are giving way to you, and only after understanding this, continue moving. Only this attitude towards the road will make your journey safe, and you will successfully and without incident get to where you were in a hurry.