The third generation of the popular Ford car was presented to the public at the Detroit Auto Show in 2010. A direct successor to its predecessor, the Focus 3 used its revised platform combined with a new "kinetic" design featuring broken lines, intricate curves and sharp edges. In addition, the Focus received an updated line of engines with different technical characteristics. Next, it will be considered what kind of oil and how much to pour into these motors.
Under the hood of the sedan, hatchback and wagon, the same power plants are hidden, but unlike the Ford Focus II, now the basic equipment starts with a 105-horsepower 1.6-liter unit (previously it was a 1.4-liter engine). The range of power units has lost its modification by 1.8 liters and now after 1.6 there is an immediate installation with 2 liters and 150 hp. in the asset. The engines have become more economical and consume an average of 5.6 to 6.7 liters of gasoline per 100 km in the combined cycle. They work in tandem with MT or a robotic box. The diesel version (140 hp) was available only until 2013, after which, due to lack of demand, the manufacturer abandoned it.
In 2014, Ford restyled the Focus 3, as a result of which the car received improved equipment and an updated appearance (redesigned rear and front), as well as a new depreciation system. The novelty was delivered to Russia with 3 types of gasoline engines: one for 1.5 liters (150 hp) and two for 1.6 (105 and 125 hp). In terms of dynamics - a car with a 1.5 engine takes the first hundred in 9.2 seconds (by 1.6 - in 12.4-13.2 seconds), the maximum speed is 210 km / h. Today, Focus 3 is devoid of simple versions and is a functional, solid and expensive purchase. The increase in the price of the basic equipment has led to an increase in demand for the model in the secondary market.
Generation 3 (2010 - present)
Ford Focus 1.6l engine. Duratec Ti-VCT 16V Sigma 105 & 125 HP
- How many liters of oil in the engine (total volume): 4.1 liters.
- Oil consumption per 1000 km: up to 200 ml.
- When to change oil: 8000-10000
Ford 2.0l engine. Duratec HE GDI Ti-VCT 150 HP
- What engine oil is poured from the factory (original): Synthetic 5W30
- Oil types (by viscosity): 5W-20, 5W-30
- How many liters of oil in the engine (total volume): 4.3 liters.
- Oil consumption per 1000 km: up to 400 ml.
- When to change oil: 10000
Menu
Changing engine oil and oil filter for Ford Focus III (fordfocusIII)
According to the manual, the Ford Focus III oil and oil filter change interval is 10,000 km/15,000 km or 12 months, whichever comes first.What engine oil is suitable for Ford Focus III?
Filling volume of oil for the engine 1.6 - 4.05 liters of new oil. It is recommended to fill in oil with tolerances: Ford WSS-M2C925-A / WSS-M2C925-B / WSS-M2C948-B, and viscosity grade 5W-20 / 5W-30 if the temperature in the region does not drop below 35 degrees. If lower, then the viscosity should be 0W20 or 0W30.Changing engine oil in a Ford Focus III on your own Video
Changing the oil on a Ford Focus III is a standard maintenance procedure that every owner can do with their own hands.Video "Step-by-step instructions for changing the Ford Focus III 1.6 oil"
Changing the gearbox oil on a Ford Focus III
Oil for (manual transmission 5/1) manual transmission 5-speed. Filling volume 2.3 l., change interval according to the instruction manual.
Oil for (manual transmission 6/1) manual transmission 6-speed. Filling volume 2.3 l., change interval according to the instruction manual.
Oil for Semi-automatic transmission (DPS6/6DCT250 (PowerShift) 6/1). Filling volume 1.8 l., change interval according to the instruction manual.
Oil for Semi-automatic transmission (DPS6/6DCT450 (PowerShift) 6/1). Refueling volume 6 l-7.2 l., change interval according to the instruction manual.
General recommendations for replacement are simple. When the volume is indicated (an example from 6l - 7.2l), it is necessary to measure the amount of drained, used oil and fill in the same amount of new oil. This scheme is applicable if there is no dipstick in the gearbox or a mark at what level it is necessary to fill.
Usually all this information is well spelled out in the car service book. But there are exceptions to the rule, not all manufacturers indicate the filling volume in the service book.
Replacing the air and cabin filter Ford Focus III
Replacing the air filter in a Ford Focus III yourself Video
Replacing the Ford Focus III air filter is a simple procedure that any car enthusiast can perform.
Video "Step-by-step instructions for replacing the Ford Focus III air filter"
Replacing the cabin filter in a Ford Focus III on your own Video
Replacing the Ford Focus III cabin filter is a simple procedure that any car enthusiast can perform.
Video "Step-by-step instructions for replacing the Ford Focus III cabin filter"
Coolant for Ford Focus III
The manufacturer recommends using an antifreeze that meets the tolerance: Ford 1336797/1336807/1365305/WSS-M 97 B44D with a long service life. Color of native antifreeze (red / pink)The replacement interval for such antifreeze is 400 thousand kilometers or 5 years, depending on which ends earlier.
In cars with 1.6L engines, the volume of the cooling system is 5.7 liters.
Replacing the coolant (antifreeze) in the Ford Focus III on your own Video
Video "Step-by-step instructions for replacing antifreeze in a Ford Focus III"
This article uses photos from the Autowp Car Encyclopedia.
The third generation Ford Focus is a modern, beautiful, safe and comfortable car. With proper maintenance, it will last for many years and will not fail. In our article we will talk about which oil is better to pour into the engine, how to choose it correctly and what you should pay attention to.
Types of engine oil
Depending on the characteristics, engine oils are divided into several types. They are used in different conditions and allow you to reliably protect the Ford Focus 3 engine from premature wear by lubricating pistons and other parts in the system. In most cases, separation is used for diesel and gasoline engines.
Generally speaking, Ford Focus3 engine oil is a substance that includes distillative products, various mixtures and residual substances, synthetic additives, etc. As for the ambient temperature in which the liquid will be used, it is divided for the following types:
- All-weather (from +25 to -25 °C).
- Winter (from -35 to 0 ° C).
- Summer (from 0 to +35 °C).
There is also another classification of motor oils - according to the composition of the base oil. This criterion includes the following types:
- Mineral.
- Synthetic.
- Semi-synthetic.
With proper operation of the Ford Focus 3, the engine oil will last for quite some time, retaining all its protective properties. Moreover, choosing the right option in accordance with the manufacturer's recommendations allows you to maximize the efficiency and performance of the Ford Focus 3 engine. Since engine oil is made from oil, that is, it is a product of its processing, it must have excellent cleaning abilities. This will keep the internal parts of the motor clean and ensure they work properly.
One of the most important requirements for third-generation Ford Focus oil is its resistance to corrosive effects on engine parts during its operation, as well as during parking without work. In addition, an extremely important factor is the resistance to storage and transportation under various conditions, as well as the absence of foaming at elevated or low temperatures.
Before deciding which oil to pour into the engine, you need to consider the mileage of the Ford Focus3. The fact is that the more years the car has and the more it has driven, the more viscous the engine oil should be.
The choice of similar products for a third-generation Ford Focus car on the market is huge, and choosing an option for yourself is not difficult. The main thing is to take into account the manufacturer's recommendations, and even better - pour only Ford branded engine oil. Below we present a list of manufacturers suitable for FordFocus3.
Basic requirements for oil
Only the oil that suits it needs to be poured into the Ford Focus 3 engine, since this is an extremely important element in ensuring the normal operation of the engine. Attention must be paid to the chemical, thermal and mechanical effects that the oil receives in the engine system when in contact with various parts. Only if they are compatible, the substance will fully fulfill its main tasks and extend the service life as long as possible. Generally speaking, the main requirement is the compliance of the characteristics of the selected option with the conditions of its use.
Among other things, you only need to fill in Ford Focus 3 with engine oil that meets the following requirements:
- The ability to maintain its properties for a long time.
- Stability with respect to temperature changes.
- Possibility of cold start Ford Focus 3.
- Excellent cleaning ability applicable to poorly soluble dirt.
- Corrosion resistance, anti-wear capability.
- Low volatility and low consumption.
- No foam formation with temperature changes.
- Ability to perform the function in extreme conditions.
- Compatibility with sealants, catalysts and other substances.
- Stability during movement and storage.
Replacement features
In general, it is not difficult. To do this, drain the old one, change the filter and fill in new engine oil. On the Ford Focus 3, this operation can be done independently or contact the service station.
It should be noted that if you decide to pour a different type of oil, then there are certain nuances. The fact is that you will need to flush the Ford Focus 3 engine with a special flushing agent, and also replace the filter (Mann, Fram or other companies). As flushing oil, you can purchase LiquiMolyMotorClean, MobilSpecial, or any other quality option from reputable companies.
In addition, flushing may be required if you find unusual deposits on the Ford Focus 3 engine that are characterized by poor solubility. The most important thing in the matter of oil is its quality. You should not spare money and buy the cheapest option, since it will not be able to reliably protect the engine, especially if the operation takes place in extreme conditions. It should be noted that the expediency of buying the most expensive products is also low, because a significant part of the price is a fee for the brand. Pay attention to the recommendations of specialists and the experience of Ford Focus 3 owners, which will allow you to choose the best option in terms of price-quality ratio.
Summarizing
In order to systematize what was said in the article, below will be presented a table that allows you to figure out what kind of oil can be poured into the Ford Focus engine. Their reliability has been tested at the level of ordinary Ford Focus 3 owners, and has also been proven by many laboratory tests.
| Year | Viscosity level | Petrol | Diesel | View | Brands | ||
| all season | winter | summer | |||||
| 2011 | 10W/5015W/405W/40 | 0 W/405 W/50 | 20W/4025W/50 | SN | CJ | synthetics | Mobil, Castrol, SHELL, Xado, Valvoline, Lukoil, ZIC, Gt-Oil |
| 2012 | 10W/4015W/40 | 0 W/400 W/50 | 20W/4025W/40 | SN | CJ | synthetics | Castrol, SHELL, Mobil, Xado, ZIC |
| 2013 | 10W/4015W/4015W/50 | 0 W/400 W/50 | 20W/4025W/40 | SN | CJ/4 | synthetics | Shell, Mobil, Castrol, Xado |
This list includes a large number of different options for the Ford Focus 3, which differ both in price and quality. Generally speaking, the main requirement for the oil is that its characteristics meet the requirements of Ford, in this case for a specific third-generation Focus car model.
You can also pour products from other companies (domestic or foreign, it does not matter), but you should not pay attention to the cheapest options, because their effectiveness is usually quite limited. Do not forget to change the engine oil on the Ford Focus 3 in a timely manner and maintain it properly. This will allow you to maximize the service life and always be confident in your car.
If, when choosing a car, you paid attention to the Ford Focus 3 hatchback, you are unlikely to be able to resist such a cool purchase. Car owners of such an “iron horse” actively praise the car, focusing on its reliability and excellent technical characteristics. The Ford engine is generally "kills on the spot", because it is an incredibly cool unit. It can last a very long time, if only enough attention is paid to its prevention. The manufacturer accompanies each new car with warranty obligations, due to which, during the warranty period, the oil is changed, if necessary, by the specialists of the service station.
For older Ford Focus 3 vehicles, the engine oil should be changed more frequently.
However, you need to tune in to the fact that after the expiration of the warranty period, all the “care” about the car will fall on your shoulders. Therefore, you need to learn how to implement, figure out how much oil to pour into the engine of your favorite Ford Focus 3 hatchback car. We are ready to act as a guide and organize a kind of “information tour” for you, tell you in detail about the process of changing engine oil in an engine.
Oil change
To learn how to carry out the manipulations associated with the replacement of consumables with the highest quality, you can listen to our advice, or you can study the manufacturer's technical instructions. Since we give you ready-made recommendations, you will not need to turn the pages, you will only need to carefully read everything that we offer you.
When it's time to change
Engine oil does not just drain. There are certain rules, knowing which, it will be easy to calculate the moment when a sharp one occurs in Ford Focus 3. The manufacturer recommends focusing on two main parameters:
- the run of your "iron horse";
- car operating time.
Initially, you should focus on the first parameter. As soon as your car overcomes fifteen thousand kilometers, you will need to replace the motor fluid.
However, everyone uses their cars differently. Some people prefer to make trips very rarely, while others cannot live even a day without a vehicle. Accordingly, with such operation, fifteen thousand kilometers can be covered within a few months. If you are also just such a car owner, then you will need to do it once a year.
The “older” the car becomes, the more often it is useful to replace the engine fluid, since its technical condition is negatively affected by:
- high humidity;
- strong gas pollution;
- poor fuel quality;
- difficult operating conditions;
- long standstills in traffic jams (idling).
How to check the level and condition of the oil
Do not rush to enter into an argument with us, claiming that some of your acquaintances did such manipulations more often than once a year. This is indeed possible, but only under one of the conditions. In particular, if for some reason even a small amount of oil flows out of the car engine, you need to quickly make up for such a shortage. This is very important, otherwise the engine of your "iron friend" will simply jam. Believe me, it is much more difficult to carry out repairs, it is unlikely that you can handle it yourself. In addition, you will have to pay a large amount of money for repairs.
In front of the engine is a special probe. Remove it first, wipe dry, removing oil traces. After that, dip the dipstick into the hole, immediately remove it and pay attention to where the oil mark is. It is very important that it is located between two marks that you can easily find on the surface of the probe. The lower mark indicates the minimum allowable oil volume, and the upper mark indicates the maximum. If the oil trace is below the permissible volume, the missing amount should be added immediately.
Which engine oil is better to choose
You should not fill Ford Focus 3 with oil that is poured into your car, for example, by a garage neighbor, even if you know that he always acquires only the best quality materials. Different cars prefer different motor oils. For this reason, you simply must remember which oil the manufacturer recommends in order to ensure the quality of the engine. When visiting a car shop, pay attention to canisters with numbers 15595E or 14E8BA. If there are several, ask a consultant or examine each canister yourself. You need to find an oil whose viscosity is either SAE 5W30 or SAE 5W20.
We will try to explain to you what is the difference between these two motor oils. 5W20 engine fluid is approved for use in regions that experience both cold winter days and sweltering heat. If you often have to operate a car in severe frosts, then it is better to give preference to an oil such as SAE 0W20. But in conditions of constant excessive heat, it is better to purchase such a kind of motor fluid as SAE 5W30.
Canisters in auto shops can be different. If the volume of the engine of your car is 1.0, then it will be enough to purchase a four-liter canister. If the volume of the engine is 2.0, then it is better to take oil with a large margin, since you will need to pour in more than five liters. Even those owners who regularly fill the engine with official oil will not get by with the purchase of only this consumable fluid. You also need to get the recommended oil filter. It is easy to find a table in the manual for your car, based on which, taking into account the technical parameters, you will find the preferred filter option for purchase.
Replacement features
So, the process in the Ford Focus 3 engine begins with a car run. It is important that the engine of your "horse" warms up well, allowing the temperature of the oil itself to rise. Warm oil will flow more easily, and cold oil will be excessively viscous, so the process will become more complicated and in general can become difficult. After running, drive the car into the pit, remove the boot, crankcase protection. This will allow you to get to the filter, of course, you will remove it too. Now you will find a drain plug, unscrew it and quickly substitute a previously prepared container.
Everything must be done quickly, but extremely carefully. Remember that the oil is very hot and splashes can cause severe burns.
It is not recommended to immediately open the filler hole and remove the dipstick, as this will lead to an increase in the oil jet. As soon as the oily liquid stops flowing out, tighten the drain hole, wipe everything around thoroughly, only after that install a new filter, after lubricating the rubber ring.
Pour in new oil through the filler hole, paying attention to the dipstick so as not to overfill or cause a deficiency. When you find that the oil has reached the "maximum" mark, stop adding fluid, start the engine, let it run a little. The oil will warm up and disperse through the system. If after that you find that the level has dropped, you will need to immediately top up the missing amount. This completes the procedure.
So, you now have information on how to change the oil in the engine of a Ford Focus 3 car. We hope that from now on you will be the most caring owners, do not let the engine work worse. We wish you an easy replacement and pleasant trips.
Ford Focus 3 is a modern and beautifully designed car. It combines comfort, safety and handling well. The machine is made of quality materials that will last for many years if timely maintenance of all machine components is carried out. For example, one of the important maintenance procedures is changing the engine oil. This is a very responsible task, and the choice of oil should be approached with caution, beingware of fakes. Compliance with all recommendations when choosing oil is the key to successful and many years of engine operation. Let's take a closer look at the types and types of suitable oils for the Ford Focus 3.
They are of several types depending on the use in certain conditions. Any truly high-quality oil will protect the Ford Focus 3 engine from overload, overheating and premature wear. The original product evenly lubricates all engine components and cleans them of mud deposits. Certain types of oils are used in gasoline or diesel engines that are equipped with the Ford Focus 3.
Oil of any brand consists of distillative products, various impurities and additives, synthetic additives, etc., which positively affect the efficiency of the internal combustion engine.
Naturally, the manufacturer selects the optimal set of additives for operation in certain climatic conditions. From here, three types of oil can be distinguished:
- All-weather (suitable at temperatures from - (minus) 25 to +25 degrees
- Winter (from - (minus) 35 to 0 degrees)
- Summer - from 0 to +35 degrees)
Let's also pay attention to the classification of oils according to another feature - according to the composition of the base oil. From here we distinguish three types of oil:
- Mineral
- Synthetic
- semi-synthetic
Timely oil changes, as well as proper operation, will give the owner confidence that his Ford Focus 3 will last a long time, and without frequent whims. At the same time, it will be possible to avoid overhaul of the engine throughout the entire operation of the car. Let's pay attention to the fact that the oil must have excellent washing ability so that all engine elements are always clean.
It is important to consider the mileage of the car before buying oil. The manufacturer recommends using a more viscous oil in cars with high mileage, or vice versa - for relatively new cars (with low mileage), a less viscous oil will do.
Oil requirement list
When choosing an oil, attention is paid to the chemical, thermal and mechanical properties of the product. The compatibility of these properties together ensures a longer engine life. In other words, you need to select an oil with properties that are suitable for operating conditions. Let's name the main requirements indicating that the product is really original and of high quality:
- Good oil is able to retain its properties for as long as possible
- The oil must be resistant to temperature changes
- There should be no problem starting the engine in cold weather
- Perfectly compatible oil properties improve fuel economy
- When the temperature changes, foam should not form.
- The oil must be optimal in thickness, and be compatible with catalysts and other substances.
Now let's look at suitable oil parameters for the Ford Focus, as well as recommended brands. Attention is presented a list of the most famous trading companies, the quality of which cannot be doubted. They differ in price, but despite this, they are equally suitable for the Ford Focus 3. You should choose oils from the list indicated, since the cheapest options can greatly harm engine reliability.
Year of release - 2011
- Viscosity parameters for multigrade oil - 10W / 5015, W / 405, W / 40; Oil type - synthetic;
- Viscosity parameters for winter oil - 0 W / 405, W / 50;
- Viscosity parameters for summer oil - 20W / 4025, W / 50
- The standard for gasoline engines is SN;
- The standard for diesel engines is CJ;
- Oil type - synthetic;
- Recommended brands are Mobil, Castrol, Shell, Xado, GT-Oil, ZIC, Lukoil, Vavoline.
Year of release - 2012
- Viscosity parameters for multigrade oil - 10W / 4015, W / 40
- Viscosity parameters for winter oil - OW / 400, W / 50
- Standard for gasoline engines - SN
- Standard for diesel engines - CJ
- Type - synthetics
- Recommended brands: Castrol, Shell, Mobil, Xado, ZIC
Year of release - 2013
- Viscosity parameters for multigrade oil - 10W / 4015, W / 4015, W / 50
- Viscosity parameters for winter oil - oW / 400, W / 50
- Viscosity parameters for summer oil - 20W / 4025, W / 40
- Standard for gasoline engines - SN
- Standard for diesel engines - SJ/4
- Type - synthetics
- Recommended brands – Shell, Mobil, Castrol, Xado
TO Ford Focus 3 do it yourself
