The Galichanin truck crane 25 tons based on KamAZ is a truck-mounted jib crane that is used for construction, high-rise, utility and rescue work. The device has a load capacity of 25 tons. Mounted on the chassis of cars from the Kama Automobile Plant. Performs loading and unloading operations. The design is characterized by high maneuverability, maneuverability, and can be used in off-road conditions, during temperature changes, snowfalls and ice. The manufacturer cares about the quality of all components, so the cars are reliable for drivers and can easily be used on construction sites.

Advantages and disadvantages of technology

Among the key advantages of the models are:

1. Long crane boom length, which allows you to lift loads to the desired height.
2. High load capacity, which ensures the possibility of loading and unloading operations of any volume.
3. The technical characteristics of the Galician 25 ton truck crane meet all modern standards and requirements.
4. The high telescoping speed of the boom allows construction, installation, and loading and unloading work to be carried out as quickly and easily as possible.
5. The chassis is characterized by increased maneuverability, thanks to which the design can be used even in off-road conditions.
6. Increased load-bearing capacity.
7. Increased wear resistance and durability of equipment.

As for the disadvantages, this is, first of all, the cost, so this equipment is best rented. Renting a truck crane will cost much less than purchasing it and further maintaining it, carrying out repair work, as well as conducting regular preventive inspections and paying salaries to drivers and operators.

Modifications

The construction of a 25-ton Galician truck crane based on KamAZ comes in various models, including:

• KS 55713 - 1
• KS 55713 - 1 V
• KS 55713 - 3
• KS 55713 - 4.4 V
• KS 55713 - 5.5 L, 5 V
• KS 55731 - 4

They differ in the type of chassis that the model is equipped with. The following chassis can be used: 65115, 43118, 6540, 65222. The wheel formula is also different, there are 6x6 and 6x4.

Specifications

Let's look at the technical characteristics of a 25-ton Galichanin truck crane based on KamAZ using the KS 55713-1 model as an example.

Parameter		Meaning
Maximum load moment, t.m		80
Maximum load capacity, t/reach, m		25/3,2
Boom length, m		9,7 — 21,7
Jib length, m		9
Maximum hook lifting height, m
— with main boom 21.7 m		21,9
— with a main boom of 21.7 m and a jib of 9 m		30,0
Max. depth of lowering of the hook by the boom 9.7 m at a reach of 5.0 m, m		12
Load mass at which boom sections are allowed to extend, t		4,0
Load lifting and lowering speed, m/min
— nominal (with a load weighing up to 25.0 tons)		5
— increased (with a load weighing up to 6.0 tons)		12
— maximum (pulley multiplicity 1)		96
Load landing speed, m/min		no more than 0.3
Turntable rotation speed, rpm		from 0.15 to 1.4
Travel speed of the crane under its own power, km/h		up to 60
Size of the support contour along x across the chassis axis, m
— with extended outrigger beams		4.2 x 5.6
— with retracted outrigger beams		4.2 x 2.28
Wheel formula of the base car		6 x 4
Base car engine:		diesel
- model		Cummins ISB6.7e4 300
- power, kWt		219
Dimensions of the crane in transport position, m (length x width x height)		12 x 2.5 x 3.6
Operating temperature, degrees. WITH		from -40 to +40
Standard service life of a truck crane, years		12

Design and controls of special equipment

The Galician 25 ton truck crane has a special drive for the crane installation, which is realized thanks to two axial piston hydraulic pumps. They begin to rotate by moving the gearbox and power take-off. The slewing bearing has an individual drive; there is independent control from the hydraulic hammer and hydraulic cylinder. As for the hydraulic system of the equipment, it is characterized by smooth control; it is possible to regulate the speed of implementation of work operations. It is also possible to simultaneously carry out several operations using a crane.

The telescoping system mechanism includes a three-section telescopic boom, the length of which on different models varies from 9.7 to 21.7 m. The boom can be in a retracted or extended position. In the retracted position, it is quite compact, so the device can be easily transported, and in the extended position, it easily moves loads to the required height during any type of work. Most often, booms are additionally equipped with lattice jib, which increases the space under the boom itself.

The lifting mechanism is extremely simple. The construction of the boom of the Galichanin truck crane is made in such a way that the load on the hook evenly distributes its weight, so it is possible to implement various tasks, including loading and unloading work in a narrow space, installing loads in hard-to-reach places. You can also enable the operation mode of equipment on supports with retracted beams with outriggers.

In the driver's cabin there are special devices that monitor the safe operation of special equipment. This includes a microprocessor-based load limiter with digital indication of operating parameters, a black box in which telemetry memory is automatically recorded, and equipment protection against overvoltage from power transmission.

The driver's cabin itself is characterized by increased comfort, high noise insulation and vibration insulation.

As for the chassis, it comes in different types. You can basically choose the one that suits you best. The instructions for using a 25-ton Galician truck crane will help you figure out the type of chassis.

Manufacturer

The equipment is produced by the Galician Truck Crane Plant, which is the owner of unique equipment that is used in the manufacture of cranes. Manufacturers take care of all components, quality and reliability of the equipment. It is also important to note that the plant does not purchase unnecessary components, and therefore the cost of special equipment is quite low compared to other equipment. The Galician plant carefully checks all components and monitors the quality of each part, since the efficiency of the equipment depends on the spare parts. The plant's advanced technologies have reduced the dynamic load of the equipment, also reduced the coefficient of friction, reduced the rotational force, and also increased the smoothness of turns.

Analogs

An analogue of Galichanin is the equipment of Ivanovets truck cranes, which has similar technical characteristics and is also characterized by high productivity. Ivanovets equipment is produced by the Ivanovo Automobile Crane Plant.

Conclusion

The Galich Truck Crane Plant produces equipment that has a lifting capacity of 25 tons and above. It is characterized by high wear resistance, reliability and a long service life. This plant is one of the leading manufacturers of specialized equipment that carries out construction, high-rise, utility, installation and loading and unloading work. The special equipment is installed on a domestic chassis and can be used in snow, ice, and rain, and is not affected by temperature changes. The device itself has an extremely comfortable cabin for the driver, a long boom that is capable of lifting loads to the required height. When choosing equipment, you should pay attention to the following technical parameters: maximum load capacity, boom reach length, jib length, maximum operational life of the equipment, as well as features of its maintenance.

Lifting equipment from the leading domestic manufacturer - the Galich Truck Crane Plant - since the start of its mass production in 1982 and to this day, confidently occupies a leading position in terms of its demand and prevalence not only in Russia, but also abroad.

Truck cranes with the ability to lift a load weighing 25 tons, produced since 1998, are produced by the brand in numerous modifications and have earned a reputation as maneuverable, reliable and functional equipment.

Such machines are used in various-scale civil and industrial construction, in road and installation work, in the oil and gas industries at temperatures ranging from -40° C to +40° C.

Compact size, mobility, and excellent cross-country ability provide fairly good performance properties of this category of vehicles not only in cramped urban traffic conditions, but also in the most extreme off-road conditions.

Common parameters

Galich truck cranes in the mentioned lifting capacity category are mounted on the basic three-axle chassis of KamAZ, MAZ and URAL vehicles.

Most of the types of equipment described are equipped with all-wheel drive, which allows this special equipment to operate confidently in difficult conditions.

Also improving the quality of cross-country ability is the option of automatic tire inflation, which ensures the required pressure in the wheel chambers when moving from one type of road surface to another.

The “Galichanin” truck cranes under consideration are equipped with YaMZ or KamAZ diesel turbo engines, the power of which ranges from 230 to 300 hp. With.

The crane installation on the described machines is controlled using a dual-circuit hydraulic system, the main elements of which are axial piston type pumps.

Their advantages include ease of maintenance, smaller radial dimensions and the ability to carry out the work process at high speeds. The crane unit operates from the power take-off and gearbox.

Load-lifting 25-ton Galichanin trucks are equipped with a 3- or 4-section retractable boom, the length of which varies from 9.7 to 28 m for different models.

The special specifications of the equipment in question include the ability to extend the boom with a load located on the hook.

A lattice type jib 9 m long can also be additionally mounted, which guarantees an increase in the working space and the area under the boom.

The designers paid special attention to the safety of the work process carried out by “Galichanin” truck cranes.

The unprecedented reliability of equipment of this class is ensured by the data collection unit, which records the main parameters of the current process.

In the event of a dangerous situation, the operator will be notified of the need for an emergency stop of work by an audible signal and will be able to interrupt the process in a timely manner.

The mentioned block processes data received from the tilt and lift angle sensors, boom radius, piston pressure converter, activating the crane load limiter and anti-tip system.

Important! In the case of work carried out in close proximity to power lines, the machines are equipped with a special module that prevents the occurrence of emergency situations.

Thus, we have before us an example of durable equipment, indispensable both within the city on narrow streets and off-road in large-scale industrial projects.

The described equipment continues to be improved and successfully proves its worth in the most difficult road and weather conditions.

KS-55713-1 and 1B

In order to more thoroughly study the design features of this class of machines, it would be advisable to dwell on a comparison of the Galician truck crane models KC-55713-1 and KC-55713-1B of the declared load capacity class.

The first of these units is the model with which the production of 25-ton trucks started, the second is a modernized machine, shown in the photo on the left. KC-55713-1B has been produced since 2009.

A number of technical characteristics common to these vehicles include the following specifications:

• 6x4 chassis based on KamAZ-65115 performed using heavy-duty steel welding technology, which guarantees the special reliability of this important structural unit;
• diesel engine Cummins ISB6.7e4 300 power of 219 kW allows you to effectively cope with long-term intensive loads;
• maximum load moment, amounting to 80 t.m, is responsible for excellent traction characteristics;
• travel speed 60 km/h;
• equipment an additional 9-meter jib, which is controlled manually and does not require special equipment;
• microprocessor load limiter, monitor in the operator's cabin with a display of the main operating parameters, protection against tipping over and exceeding the permissible weight of the load, a coordinate mechanism for protecting the crane.

The set of technical characteristics that differ between the described units consists of the parameters listed below.

First of all, attention should be paid to the length of the boom and its design. In the first model, this element is three-sectional with a rectangular profile, adjustable in the range of 9.7-21.7 m, in the second, it is a four-sectional boom with a hexagonal cross-section, its dimensions are 9.7-28 m.

Hence the rather significant difference in the parameters of the maximum hook lifting height. For the KC-55713-1 truck crane, these figures are 21.9 m with the main boom, which are inferior to the height of 28.3 m for the KC-55713-1B.

The lift coupled with the jib for the first machine is only 30 m, while for the second it is 37.3 m. The depth of lowering of the hook at the outreach is also different: 5 m: for a crane with a shorter length of 12 m, for a longer one - 25 m .

The 2009 model has improved load-bearing characteristics. Here, the sections are pulled out not sequentially, but synchronously, which significantly reduces the time spent on the entire work process.

The load lowering speed for KC-55713-1 is 0.3 m/min, for KC-55713-1B it is no more than 0.2 m/min.

The compared truck cranes also differ in their weight in the transport position. The unit mentioned first weighs 20.5 tons, the second - 23.41 tons.

The compact size of the described truck cranes characterizes the equipment as perfectly adapted to functioning in a small space, as well as to trouble-free movement in dense city traffic conditions.

Prices

Cost analysis for the described category of equipment with the considered load capacity shows that prices for new truck cranes directly from the manufacturer start from 5,500,000 rubles.

The market for used units offers a wide range of prices ranging from 1,990,000 to 4,300,000 rubles.

Naturally, the pricing factors here are the year of production, the number of operating hours, and the technical condition of the equipment.

Qualities worthy of customer trust

A huge advantage of this brand is that, focusing on the needs of domestic consumers, the company’s engineers are actively introducing the latest production technologies.

The use of trustworthy foreign components in the design of machines (hydraulic elements, rubber seals) allows us to achieve excellent results in the reliability and endurance of the described special equipment.

Excellent maintainability, extended service life, compliance with the highest safety standards, coupled with an affordable price, influence such a high consumer demand for Galicianin truck cranes.

The exterior and interior of the cabin of machines of the described category are conducive to long-term work without fatigue and stress.

Equipping with air conditioning and heating systems, ergonomic, highly thought-out controls contribute to the high productivity of the operations carried out by the equipment.

The statistics are amazing: every fourth lifting unit sold in Russia came off the assembly line of the mentioned plant.

Focusing on the segment of this special equipment that is in high demand, the manufacturer is constantly searching for new technical solutions to improve existing models.

Particularly concentrating on ensuring safety and constantly improving cargo-height specifications, Galicianin technologists do not forget about driver comfort.

Thanks to the wide assortment of Galich truck cranes, the high degree of reliability of the working hydraulic system, an extensive network of dealerships and technical service centers, the percentage of machines sold is constantly growing.

Even if you lack funds and are unable to purchase a new machine, you can always buy a crane that has already been in operation, but has not exhausted its working life.

Among the huge variety of proposals, you can undoubtedly find a worthy option that satisfies any technical and material needs.

Consumer confidence in Galicianin truck cranes is greater than ever.

Having no analogues among foreign equipment, truck cranes of the described brand fully satisfy the needs of the Russian market in this segment.

After all, this is domestic equipment, produced taking into account the complex Russian realities, but oriented towards the highest standards of quality, durability and performance.

Since 1982, under the GALICHANIN brand, they have been produced by the Galich Truck Crane Plant.

The products of the GAKZ plant now are truck cranes with a lifting capacity of 25-110 tons, installed on the chassis of domestic KAMAZ, MAZ, Ural or MZKT vehicles.

Small models of truck cranes from 25 to 32 tons are in greatest demand. In total, the plant produces 14 modifications of the Galichanin 25-ton crane, 11 of which are based on KAMAZ.

Truck cranes Galician 25 t are used for lifting work in the following industries:

• industrial and residential construction;
• installation, road work;
• laying oil and gas pipelines;
• mining;
• carrying out any lifting work at objects remote from each other.

Peculiarities:

• the ability to work on a close support body, when the supports do not extend beyond the transport dimensions of the crane;
• Installing the crane on supports with the outrigger beams retracted - for more comfortable work on a worksite of insufficient size.

Extending the boom with a load on the hook gives the crane the opportunity to place loads in inconvenient, inaccessible places, and move them in a limited space among already erected buildings.

General parameters of Galichanin 25 t cranes

Galician cranes 25 tons have several common characteristics and parameters:

• installation on three-axle chassis of KAMAZ, MAZ or URAL vehicles;

• Auto-inflation of the tubes ensures the required tire pressure when the quality of the road surface changes, which makes the truck crane even more more passable;

• Galician cranes are equipped with YaZ or KamAZ diesel turbo engines with power = 230-300 hp;

• the crane installation operates from the PTO and gearbox;

• There is Possibility of increasing boom length due to additional installation of a lattice jib, length = 9 m;

• crane load limiter ONK-160 with a microprocessor data acquisition unit has a telemetric memory, protects the mechanism from overload or tipping over;

• crane protection module from dangerous voltage(MZON) for work near power lines;
• operating temperature range ±40ºС;
• load moment = 80 tm;
• travel speed up to 60 km/h.

Technical characteristics of the Galichanin 25 crane

Truck crane 25 tons - technical characteristics of modifications based on KAMAZ:

KS-55713-1/1V/1V-4 are installed on the KAMAZ-65115 (6x4) EURO-4 chassis. KS-55713-1 - the first crane model - 25 ton.

KS-55713-1V: improved version released in 2009

KS-55713-1V-4 — new 2015:

• boom - OVOID, 4 sections, length = 9.7-31 m (= 40 m with jib);
• diesel engine Cummins ISB6.7e4,219 kW;

KS-55713-4/4V— are installed on the all-wheel drive chassis KAMAZ-65111/53228 (6x6) EURO-4, the chassis has a 10-wheel layout. Engine - diesel, KAMAZ-740.622-280, 240 hp.

KS-55713-4:

• working area = 240º;
• box type boom, 3 sections, length = 9.7-21.7 m.

KS-55713-4V:

• working area = 360º;
• hexagonal profile boom, 4 sections, length = 9.5-28 m.

KS-55713-5:

• installed on the all-wheel drive chassis KAMAZ-43118 (6x6), EURO-4;

• working area = 240º;
• box type boom, 3 sections, length = 9.7-21.7 m;

KS-55713-5V:

• working area = 360º;
• hexagonal profile boom, 4 sections, length = 9.5-28 m;
• engine - diesel KAMAZ-740.662 300, 221 kW.

KS-55713-5V-4 - new 2015:

• working area = 360º;
• boom - OVOID, 4 sections, length = 9.7-31 m;
• increased load moment = 85 tm;
• add. equipped with a 9m shunting jib, tilt angle = 0/20/40º, load capacity = 4 t.

KS-55713-5L - new 2016, “L” - light series (crane weight in minimum configuration = 21 t):

• working area = 360º;
• boom - OVOID, 3 sections, length = 9.7-23.7 m;
• increased load moment = 85 tm;
• engine - diesel KAMAZ-740.662 300, 221 kW;
• add. equipped with a 9 m shunting jib, tilt angle = 0/20/40º, load capacity = 4 tons.

KS-55731-1 new 2015, installed on KAMAZ-6540 chassis (8x4), EURO-4:

• working area = 360º;
• engine - diesel Cummins 6 ISB e4 300, 219 kW;
• equipped with additional counterweight and oil cooler;
• oil cooler, air conditioning;
• X-shaped support frame.

KS-55731-4 new 2015, installed on the KAMAZ-65222 (6x6)EURO-4 chassis:

• working area = 360º;
• boom - OVOID, 5 sections, length = 10.45-40 m;
• increased load moment = 100 tm;
• engine - diesel KAMAZ-740.632-400, 294 kW;
• equipped with additional counterweight and oil cooler;
• add. equipped with a 9m shunting jib, tilt angle = 0/20/40º, load capacity = 4 t;
• oil cooler, air conditioning;
• crane control system - LUDV;
• X-shaped support frame.

Modifications - КC-55713-1 and 1В

Model KS-55713-1 was the starting (basic) model for all Galician 25-ton cranes.

KS-55713-1V is an already modernized crane, the production of which began in 2009.

Galician 25 tons - technical characteristicsmodels 55713-1 and 1B

	KS-55713-1	KS-55713-1V
	KAMAZ 65115, 6x4
fuel consumption	35.1l/100km (38.3l/100km - winter), 6.3l/hour - tap operation
crane operator's cabin	rotary
crane boom
	rectangular (box) profile	hexagonal (6-gonal) section
	length=9-21.9m	length=9-28m
extension of boom sections	sequentially	synchronously
hook lowering depth at reach 5m
load lowering speed
transport weight
work zone
PTO (power take-off), location	upper (scheme - 2-pump)	bottom right gearbox (single-pump circuit)
crane control	simultaneous carrying out of several crane operations
rotation mechanism	unit installed on cranes for 40 years	Planetary rotation mechanism imported with disc brakes

Since 1982, automobile cranes under the GALICHANIN brand have been produced by the Galich Automobile Crane Plant.

The products of the GAKZ plant now are truck cranes with a lifting capacity of 25-110 tons, installed on the chassis of domestic KAMAZ, MAZ, Ural or MZKT vehicles.

Small models of truck cranes from 25 to 32 tons are in greatest demand. In total, the plant produces 14 modifications of the Galichanin 25-ton crane, 11 of which are based on KAMAZ.

Galichanin truck cranes are used for lifting work in the following industries:

• industrial and residential construction;
• installation, road work;
• laying oil and gas pipelines;
• mining;
• carrying out any lifting work at objects remote from each other.

Peculiarities:

• the ability to work on a close support body, when the supports do not extend beyond the transport dimensions of the crane;
• Installing the crane on supports with the outrigger beams retracted - for more comfortable work on a working site of insufficient size.

Common parameters

Galician cranes 25 tons have several common characteristics and parameters:

• installation on three-axle chassis of KAMAZ, MAZ or URAL vehicles;

• auto-inflation of the tubes ensures the required tire pressure when the quality of the road surface changes, which makes the truck crane even more passable;

• Galician cranes are equipped with YaZ or KamAZ diesel turbo engines with power = 230-300 hp;

• the crane installation operates from the PTO and gearbox;

• It is possible to increase the length of the boom due to additional installation of a lattice jib, length = 9 m;

• crane load limiter ONK-160 with a microprocessor data collection unit has telemetric memory, protects the mechanism from overload or tipping;

• crane protection module from dangerous voltage (MZON) for work near power lines;
• operating temperature range ±40ºС;
• load moment = 80 tm;
• travel speed up to 60 km/h.

Specifications

Truck crane 25 tons - technical characteristics of modifications based on KAMAZ:

KS-55713-1/1V/1V-4 are installed on the KAMAZ-65115 (6x4) EURO-4 chassis. KS-55713-1 - the first crane model - 25 ton.

KS-55713-1B: improved version, released in 2009.

KS-55713-1V-4 - new 2015:

• boom - OVOID, 4 sections, length = 9.7-31 m (= 40 m with jib);
• diesel engine Cummins ISB6.7e4,219 kW;

KS-55713-4/4V - installed on the all-wheel drive chassis KAMAZ-65111/53228 (6x6) EURO-4, the chassis has a 10-wheel layout. Engine - diesel, KAMAZ-740.622-280, 240 hp.

• working area = 240º;
• box type boom, 3 sections, length = 9.7-21.7 m.

• working area = 360º;
• hexagonal profile boom, 4 sections, length = 9.5-28 m.

• installed on the all-wheel drive chassis KAMAZ-43118 (6x6), EURO-4;
• working area = 240º;
• box type boom, 3 sections, length = 9.7-21.7 m;

• working area = 360º;
• hexagonal profile boom, 4 sections, length = 9.5-28 m;
• engine - diesel KAMAZ-740.662 300, 221 kW.

KS-55713-5V-4 - new 2015:

• working area = 360º;
• boom - OVOID, 4 sections, length = 9.7-31 m;
• increased load moment = 85 tm;
• add. equipped with a 9m shunting jib, tilt angle = 0/20/40º, load capacity = 4 t.

KS-55713-5L - new 2016, “L” - light series (crane weight in minimum configuration = 21 t):

• working area = 360º;
• boom - OVOID, 3 sections, length = 9.7-23.7 m;
• increased load moment = 85 tm;
• engine - diesel KAMAZ-740.662 300, 221 kW;
• add. equipped with a 9 m shunting jib, tilt angle = 0/20/40º, load capacity = 4 tons.

KS-55731-1 new 2015, installed on the KAMAZ-6540 chassis (8x4), EURO-4:

• working area = 360º;
• engine - diesel Cummins 6 ISB e4 300, 219 kW;
• equipped with additional counterweight and oil cooler;
• oil cooler, air conditioning;
• X-shaped support frame.

KS-55731-4 new 2015, installed on the KAMAZ-65222 (6x6) EURO-4 chassis:

• working area = 360º;
• boom - OVOID, 5 sections, length = 10.45-40 m;
• increased load moment = 100 tm;
• engine - diesel KAMAZ-740.632-400, 294 kW;
• equipped with additional counterweight and oil cooler;
• add. equipped with a 9m shunting jib, tilt angle = 0/20/40º, load capacity = 4 t;
• oil cooler, air conditioning;
• crane control system - LUDV;
• X-shaped support frame.

Galichanin 25 ton truck cranes, in terms of their technical characteristics, fully comply with the Federal Law of the Russian Federation No. 257 (08.11.07) and can move freely on all roads without fear of fines.

BOOM FEATURES

The ovoid profile used in the boom structure is used in mechanical engineering in many countries around the world and is optimal for the type of equipment in question. The telescopic boom that the Galichanin truck crane is equipped with can have from three to five retractable sections. They are made of high quality steel WELDOX and SSAB Domex, supplied from Sweden.

Telescoping of sections is possible with a load attached to the slings. This allows delivery to hard-to-reach places between existing obstacles.

Extending the boom with a load on the hook gives the crane the opportunity to place loads in inconvenient, inaccessible places, and move them in a limited space among already erected buildings.

USING ADDITIONAL EQUIPMENT

Almost every truck crane has additional boom equipment - a jib. It is made of a lattice structure from high-strength pipe. With its help, the range of action of the equipment significantly expands, as does its overall functionality.

Some models, for example, the KS-85713-2 truck crane, are equipped with a two-legged jib, which further increases their working area in the horizontal movement of cargo.

IMPLEMENTATION OF INNOVATIVE MANAGEMENT SYSTEMS

Some representatives of truck crane equipment have in their arsenal a control system made in Germany by Hyudak and Hirschmann, called “Galician H&H”. It ensures the safety of all operations performed by the truck crane and complies with international quality standards.

The system controls the operation of the electrical and hydraulic system drives. With its help, the functions of the truck crane are controlled using small levers (joysticks) and buttons, which is very convenient for maintenance personnel.

(( reviewsOverall )) / 5 Users ( 0 Estimates)

Reliability

Convenience and comfort

Maintainability

Ride quality

Leave feedback

SPETSNEFTEMASH GROUP sells new Galician truck cranes from stock and on order to all regions of Russia at prices below factory prices. This catalog presents all current models of Galician truck cranes with technical characteristics and photos. For more information, please contact our sales department.

Catalog of truck cranes of the Galichanin brand

Technical characteristics KS-55713-1 Parameter Value Maximum load moment, t.m 80 Maximum load capacity, t/reach, m 25/3.2 Boom length, m 9.7 - 21.7 Jib length, m 9 Maximum hook lifting height , m - with main boom 21.7 m 21.9 - with main boom 21.7 m and jib 9 m 30.0 Max. depth of hook lowering, m 12 Weight of cargo at which extension of the boom sections is allowed, t 4.34 Speed ​​of lifting and lowering the load, m/min - nominal (with a load weighing up to 25.0 tons) 5 - increased (with a load weighing up to 6 ,34 t) 12 - maximum (pulley multiplicity 1) 40 Load landing speed, m/min no more than 0.3 Rotation speed of the turning part, rpm from 0.15 to 1.4 Crane travel speed under its own power, km/h up to 60 Size of the support contour along x across the chassis axis, m - with outrigger beams extended 4.2 x 5.6 - with outrigger beams retracted 4.2 x 2.28 Wheel formula of the base car 6 x 4 Engine of the base car: diesel - model Cummins ISB6.7 300 - power, hp (kW) 307 (225.6) Dimensions of the crane in transport position, m (length x width x height) 12 x 2.5 x 3.6 Operating temperature, degrees . From -40 to +40 Warranty period for the crane is 18 months from the date of delivery of the crane to the consumer, but not more than 1000 operating hours Standard service life of the truck crane, years 12 Description of the KS-55713-1 model Automotive jib crane KS-55713-1 with a lifting capacity of 25 tons mounted on the chassis of KamAZ 65115 vehicles. Designed for loading and unloading and construction and installation work at dispersed sites. All chassis have excellent maneuverability and ease of control, which allows the crane to be used at sites with various types of access roads, and its small dimensions make it suitable for operation in the cramped conditions of modern cities. Additional equipment of the boom with a lattice jib 9 m long allows for the largest service area and the size of the under-jib space among similar models of 25-ton cranes. The transfer of the jib from the transport position to the working position and back is done manually without the use of additional lifting equipment.

Pages: 1

Price list for truck cranes Galician

Truck crane model	Truck crane chassis	Price including VAT, rubles
100 tons (OVOID)
KS-85713 "Galician". Main boom 51.0 m ovoid profile	chassis Volvo FM (10x4) EURO-4	45 000 000
KS-84713-2 “Galician”. Main boom 51.0 m ovoid profile	chassis MZKT (10x4) EURO-4	40 500 000
100 tons (OVOID) - options
Double hook suspension with lifting capacity 100.0 tons		450 000
Double folding jib 10.0 m long - 18.0 m		900 000
Installation of a second (auxiliary) cargo winch complete with a single block (“beak”) on the boom head and with an additional hook suspension with a lifting capacity of 5.0 tons. The kit also includes installation of a video camera to monitor the winding of the rope cargo winch		1 500 000
	the maximum set of additional separately transportable counterweights can have a total mass of 20.0 tons and include 4 counterweights weighing 5.0 tons each	600 000
Set of two additional separately transportable counterweights of 5.0 tons each		600 000
70 tons (OVOID)
KS-75721 “Galician” H&H (Hydak and Hirschmann, Germany) basic configuration boom 42.0 m ovoid profile	chassis Volvo FM (8x4) EURO-4	26 000 000
KS-75721-1 “Galichanin” H&H (Hyudak and Hirschmann, Germany) basic configuration boom 42.0 m ovoid profile	chassis KamAZ-7330 (10x4) EURO-4	23 300 000
KS-74721-2 “Galichanin” H&H (Hyudak and Hirschmann, Germany) basic configuration boom 42.0 m ovoid profile	chassis MZKT-750120 (10x4)	23 300 000
KS-75721-3 “Galichanin” H&H (Hyudak and Hirschmann, Germany) basic configuration boom 42.0 m ovoid profile	MAN chassis (8x4)	26 000 000
KS-75721-6 “Galichanin” H&H (Hyudak and Hirschmann, Germany) basic configuration boom 42.0 m ovoid profile	chassis MZKT-652715 (8x8)	24 500 000
KS-75721-8 “Galichanin” H&H (Hyudak and Hirschmann, Germany) basic configuration boom 42.0 m ovoid profile	Scania chassis (8x4) EURO-5	26 000 000
70 tons (OVOID) - options
Installation of a second cargo winch complete with a single block on the boom head for operation on a single reeving with a crane suspension of 3.2 tons and a video camera for monitoring the winding of the cargo winch rope		400 000
Double-knee folding jib 9.1 m - 15.0 m long, with a variable tilt angle of 0 or 30 degrees from the boom axis, complete with a hook suspension with a lifting capacity of 6 tons. Installation is possible in conjunction with a second cargo winch		600 000
Additional, separately transportable counterweight, 4.0 tons (for KS-75721-1 and KS-74721-2 weight 4.3 tons)		300 000
		165 000
		180 000
60 tons (OVOID)
KS-65721 “Galichanin” basic configuration boom 42.0 m ovoid profile	chassis Volvo FM (8x4) EURO-4	24 000 000
KS-65721-2 "Galichanin" basic configuration boom 42.0 m ovoid profile	chassis MZKT-750110 (8x4) EURO-4	20 000 000
KS-65721-6 “Galichanin” basic configuration boom 42.0 m ovoid profile	chassis MZKT-652715 (8x8) EURO-4	22 000 000
60 tons (OVOID) - options
Installation of a second cargo winch complete with a single block on the boom head for operation on a single reeving, with a hook suspension with a lifting capacity of 3.2 tons and a video camera for monitoring the winding of the cargo winch rope		400 000
Double-knee folding jib 9.1 m - 15.0 m long, with a variable tilt angle of 0 or 30 degrees from the boom axis, complete with a hook suspension with a lifting capacity of 6 tons. Installation is possible in conjunction with a second cargo winch (separately transportable for KS-65721-6)		600 000
Set of two additional separately transportable counterweights: - 2 x 3.25 tons for truck cranes KS-65721, KS-65721-2; - for the KS-65721-6 truck crane are included in the basic package.		375 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with two cargo winches)		180 000
50 tons Compact crane (OVOID)
KS-65715 “Galichanin” basic equipment 40 m boom with ovoid profile	chassis VOLVO (8x4) EURO-4	21 500 000
KS-65715-1 “Galichanin” basic equipment 40 m ovoid profile boom		18 700 000
KS-65715-3 “Galichanin” basic equipment 40 m ovoid profile boom	chassis MAN (8x4) EURO-4	23 000 000
KS-65715-6 “Galichanin” basic equipment 40 m ovoid profile boom		21 000 000
50 tons Compact crane (OVOID) - options
Installation of a second cargo winch complete with a single block on the boom head, with a hook suspension with a lifting capacity of 3.2 tons and a video camera for monitoring the winding of the cargo winch rope		450 000
Double folding jib, length 10 m - 17.0 m, with variable tilt angle 0; 20 or 40 degrees from the boom axis, complete with a hook suspension with a lifting capacity of 9.5 tons. Installation is possible in conjunction with a second cargo winch		700 000
Additional separately transportable counterweight, weighing 5 tons		300 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with two cargo winches)		180 000
50 tons (OVOID)
KS-65713-1 “Galichanin” basic configuration boom 34.1 m ovoid profile	chassis KamAZ-65201 (8x4) EURO-4	14 450 000
KS-64713-2 “Galichanin” basic configuration boom 34.1 m ovoid profile	chassis MZKT-750110 (8x4) EURO-4	14 450 000
KS-65713-5 “Galichanin” basic configuration boom 34.1 m ovoid profile (basic counterweights are transported separately from the truck crane)		18 200 000
KS-65713-6 “Galichanin” basic configuration boom 34.1 m ovoid profile	chassis MZKT-652715 (8x8) EURO-4	18 200 000
50 tons (OVOID) - options
Installation of a second cargo winch complete with a single block on the boom head, with a hook suspension with a lifting capacity of 3.2 tons (except for KS-65713-5)		350 000
Two-stage telescopic jib with a length of 9.1 m - 15.0 m, with a variable tilt angle of 0 or 30 degrees from the boom axis, complete with a hook suspension with a lifting capacity of 4.5 tons. Installation is possible in conjunction with a second cargo winch ( except KS-65713-5).		600 000
Set of two additional separately transportable counterweights 2 x 3.0 tons.		350 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with two cargo winches)		180 000
32 tons (OVOID)
KS-55729B “Galichanin” boom 30.2 m ovoid profile	chassis MAZ-6312 (6x4) EURO-4	8 750 000
KS-55729-1V "Galichanin" boom 30.2 m ovoid profile	KamAZ-6540 chassis (8x4) EURO-4	9 050 000
KS-55729-5B “Galichanin” boom 30.2 m ovoid profile (additional counterweight and jib are transported separately from the truck crane)	chassis KamAZ-63501 (8x8) EURO-4	10 300 000
32 tons (OVOID) - options
Additional separately transportable counterweight weighing 2.9 tons for the KS-55729V truck crane		270 000
Additional separately transportable counterweight weighing 2.4 tons for the KS-55729-5V truck crane		250 000
Additional equipment: 9.0 m jib with variable tilt angle 0 or 30 degrees from the boom axis		270 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
25 tons
Boom 21.7 m
KS-55713-1 “Galichanin” boom 21.7 m		6 850 000
KS-55713-3 “Galichanin” boom 21.7 m	chassis Ural-4320 (6x6) EURO-4	6 750 000
KS-55713-4 “Galichanin” boom 21.7 m		6 900 000
KS-55713-5 “Galichanin” boom 21.7 m		6 900 000
25 tons / Boom 21.7 m - options
For series models with a boom length of 21.7 meters: additional equipment with a straight lattice jib 9.0 m long (except for the KS-55713-3 model)		220 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
Boom 23.7 m OVOID
KC-55713-1L “Galichanin” boom 23.7 m ovoid profile	chassis KamAZ-65115 (6x4) EURO-4	6 950 000
KC-55713-5L “Galichanin” boom 23.7 m ovoid profile	chassis KamAZ-43118 (6x6) EURO-4	6 950 000
25 tons / Boom 23.7 m OVOID - options
For series models with a boom length of 23.7 meters: additional equipment with a straight lattice jib 9.0 m long with a lifting capacity of 2.6 tons		300 000
For the KS-55713-1L truck crane, an additional counterweight weighing 1.35 tons can be carried in the base or separately.		100 000
For the KS-55713-5L truck crane, installation of a hydraulic portal for the possibility of mounting/dismounting an additional removable counterweight		80 000
For the KS-55713-5L truck crane, an additional counterweight weighing 400 kg can be carried in the base or separately.		60 000
For series models with a boom length of 23.7 meters: additional equipment with an oil cooler		90 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
Boom 28 m
KC-55713-1B “Galichanin” boom 28.0 m	chassis KamAZ-65115 (6x4) EURO-4	7 300 000
KC-55713-3В “Galichanin” boom 28.0 m	chassis Ural-5557 (6x6) EURO-4	7 150 000
KC-55713-4В “Galichanin” boom 28.0 m	chassis KamAZ-65111 (6x6) EURO-4	7 300 000
KC-55713-5V “Galichanin” boom 28.0 m	chassis KamAZ-43118 (6x6) EURO-4	7 300 000
KC-55713-6В "Galichanin" boom 28.0 m	chassis MAZ-6312 (6x4) EURO-4	7 150 000
25 tons / Boom 28 m - options
For series models with a boom length of 28 meters: additional equipment with a straight lattice jib 9.0 m long (separately transportable for models KS-55713-3V and KS-55713-5V)		230 000
For the KS-55713-5V truck crane, installation of a hydraulic portal for the possibility of mounting/dismounting an additional removable counterweight		80 000
For the KS-55713-5V truck crane, an additional counterweight weighing 650 kg can be carried in the base or separately.		60 000
For series models with a boom length of 28 meters: additional equipment with a tool box for slings and a washbasin		negotiable
For series models with a boom length of 28 meters: additional equipment with an oil cooler		90 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
Boom 31 m OVOID
KS-55713-1V-4 “Galichanin” boom 31 m ovoid profile	chassis KAMAZ-65115 (6x4) EURO-4	7 950 000
KS-55713-5V-4 “Galichanin” boom 31 m ovoid profile	chassis KAMAZ-43118 (6x6) EURO-4	7 950 000
25 tons / Boom 31 m OVOID - options
For series models with a boom length of 31 meters: additional equipment with a 9.0 m long jib made of high-strength steel (can be installed on the head at angles of 0°, 20° and 40° to the boom axis) (separately transportable for the KS-55713-5B-4 model )		300 000
For the KS-55713-1B-4 model with a boom length of 31 meters: an additional separately transportable counterweight weighing 4.5 tons		330 000
For the KS-55713-5V-4 model with a boom length of 31 meters: the first additional separately transportable counterweight weighing 1.9 tons		140 000
For the KS-55713-5V-4 model with a boom length of 31 meters: a second additional separately transportable counterweight weighing 4.5 tons		330 000
For series models with a boom length of 31 meters: additional equipment with an oil cooler		90 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
Boom 40 m OVOID
KS-55731-1 “Galichanin” boom 40 m ovoid profile	chassis KAMAZ-6540 (8x4) EURO-4	12 900 000
KS-55731-4 “Galichanin” boom 40 m ovoid profile	chassis KAMAZ-65222 (6x6) EURO-4	14 400 000
25 tons / Boom 40 m OVOID - options
For series models with a boom length of 40 meters: a 9.0 m jib made of high-strength steel with a lifting capacity of 6.3 tons		300 000
For series models with a boom length of 40 meters: installation of a second cargo winch complete with a single block on the boom head and with an additional hook suspension with a lifting capacity of 3.2 t		450 000
For series models with a boom length of 40 meters: additional equipment with a counterweight weighing 3.5 tons		300 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with one cargo winch)		165 000
Centralized lubrication system for elements and components of a BEKA crane installation (complete with two cargo winches)		180 000
Universal pile driving unit
Universal pile-driving unit USA-2 based on KS-55729-5M lifting capacity 32 t (basic equipment: 18.7 m pile driver mast; diesel hammer with impact mass 1250 kg; two cargo winches; hook suspension	chassis KAMAZ-6560 (8x8) EURO-4	21 500 000
Universal piling unit - options
Cradle capacity 250 kg for lifting people to a height of up to 12 m		200 000
Hydraulic rotator with a force of 85 kN*m for screwing screw piles		1 450 000
Hydraulic rotator with a force of 15 kN*m for drilling		negotiable
Diesel hammer with a maximum impact mass of 1800 kg		negotiable
Crane-manipulator installation
Crane-manipulator installation-150		2 130 000
Crane-manipulator installation - options
Turnkey installation of KMU-150 on the Customer’s vehicle	The vehicle modification needs clarification. The cost of vehicle certification is not taken into account	200 000
Rear beam with two rear outriggers extended by hydraulic cylinders complete with two rear rotary support hydraulic cylinders (outriggers) assembled with hydraulic lines	Car modification needs clarification	200 000