We continue servicing the car Hyundai Porter (Hyundai Porter), 2006 release, TAGAZ assembly. Today we will change the oil, antifreeze and all filters in the car. We start work, for this we climb under the car, remove the engine protection. On the side of the exhaust manifold, there is a drain plug on the block, unscrew it with a 14 key and drain the antifreeze:

Here is the drain cock from the radiator:

We put a small hose on it and unscrew it to drain the coolant. About 3 liters merged from the radiator, the main volume remained in the block, so it will not work to replace the antifreeze in only one radiator, it is also necessary to drain it from the block.

Along the way, we unscrew the drain plug from the engine, using a 17 key, and drain the used oil:

After unscrewing the oil filter, it is convenient to do this both from above and from below. We have a new filter PMC, part number in the spare parts catalog: PBA-002. As all the mining is merged, we twist the drain plug and you can fill in new oil. We got about 5.7 liters.

We turn to the fuel filter, it is located under the driver's seat:

Before replacing it, disconnect the connector with wires from the float. It just unscrews counterclockwise. Be prepared for the fact that diesel fuel will pour, so substitute the container in advance. After removing the fuel filter, unscrew the float from it. It is made in order to signal that there is water in the fuel. We remove the sealing gum from it:

We take a new rubber band, it comes with a filter, we have it PMC PCA-003. Then we twist the float by hand into the housing of the new filter. We put it in the reverse order to the seat. After installation, manually pump the mechanical pump to fill it with diesel.

Let's move on to replacing the air filter in the Hyundai Porter. It is located on the right side, under the cab, below:

We unscrew the side lamb on the body with the help of hand strength. We take out the old filter element. We have a new filter from FORTECH, spare parts catalog number FA-007. We put it in reverse order. It is recommended to lubricate all threaded connections with copper grease, so that later you can unscrew everything without problems.

Video oil, antifreeze, air, fuel filter change in Hyundai Porter:

Backup video on how to change engine oil, air and fuel filters in Hyundai Porter:

18-11-2013, 18:21

Oil change in hyundai porter,a very difficult matter. With this problem, it is better to contact the auto repair shop, where you can immediately buy spare partshyundai porter. And yet, if you yourself decide to change the oil, be prepared for the fact that you can get pretty dirty.

An oil change, unlike a level check, takes place when the mileage is about fifteen thousand kilometers, or when it is planned after a few months. The most reliable way to change the oil is when the car is well warmed up.

The first thing to do is raise the front of your car with a ramp. It is not recommended to install the machine on a jack, it may break. The height of the lift must be at least half a meter. Make sure that the machine is firmly fixed and does not dangle in different directions. The surface of the road must be flat, without a slope. To make it comfortable to lie under the car, you need to lay something on the ground. The car must be on the handbrake and have bricks or "shoes" under the wheels. No need to be lazy to check stability, safety is paramount.

Before climbing under the car, you need to prepare the necessary tools. An oil filter wrench can be purchased from parts stores. It is better to buy a complete set of spare parts. Pre-prepare a container for old oil.

Find the oil pan, unscrew the plug from the crankcase using tools. Let the oil drain completely into the container prepared in advance. The main thing is to be careful, in a warm car, the oil will be very hot.

After carefully removing the filter, you need to throw it away, preferably in a plastic bag. Make sure that the oil drips into the finished container. To avoid oil leakage, tighten the crankcase plug as tightly as possible, then install a new filter in place of the old one. Lubricate the rubber gasket near the threads on the filter with oil.

Now you can get out from under the car, open the hood. We unscrew the cover from the oil block, fill in new oil, about five liters, the volume depends on the engine. After that, you need to firmly tighten the cover of the block.

After making sure that there are no oil leaks under the car, we first start the car engine. If the oil is still leaking, it is worth contacting an auto mechanic. At the end of work, you need to check the oil level in the engine and you can close the hood, lower the car to a horizontal position.

High-quality repair and diagnostics of cars and commercial vehicles. We work with individuals and organizations. We carry out diagnostics of the brake system and running gear, engine repair, car maintenance, bodywork and painting. Auto electricians with many years of experience work in the state. Motorists specialize in certain brands of cars.

Car service on Piskarevka - Energetikov avenue, house 59.

Located next to the metro station "Ploshchad Lenina". Covers car repairs in Kalininsky, Vyborgsky and Primorsky districts of St. Petersburg. Performs all work on the chassis, engine, suspension and installation of additional equipment. A new wheel alignment stand for cars and minibuses has been installed. Doesn't do car painting or body work. It is convenient to get from the metro stations "Ozerki", "Prospect of Enlightenment", "Specific" and "Pionerskaya". There is a cozy cafe in the building. To the ring road - 10 minutes.

Car service in Kupchino - st. Dimitrova, house 1

Initially, the service was engaged only in body repair and painting. Subsequently, several buildings were built in which new two and four post lifts were installed. Large car wash for cars and commercial vehicles. Separate workshop for diagnostics of diesel and petrol injectors. Steering racks, turbines and auto electrics are being repaired. The repair of mechanical and automatic transmissions is widely represented. Within walking distance from the metro station "Zvezdnaya", "Kupchino", "Obukhovo". Suitable for residents of the Frunzensky and Kirovsky districts.

Timely oil change in the Hyundai Porter engine allows you to keep the car in working order for a long time. In the material below, you can find out when a car repair is necessary and under what circumstances technical work is performed to replace the lubricant.

When is an oil change required?

Every car, regardless of brand and technical characteristics, needs high-quality repairs and diagnostic maintenance. The oil change schedule is specified in the technical passport of the car from the manufacturer. If there is no data provided, it is necessary to check the lubrication depending on the performance indicators.

Signs of a need for replacement:

• High fuel and oil consumption;
• The engine system does not cope with its task. Often there are failures at idle;
• Noise, extraneous sounds, clicks in the engine;
• Power drop of the power unit.

If one of the signs is found, it is necessary to correct the problem. With the necessary algorithm of actions and the minimum number of tools, this procedure can be carried out even by a novice motorist.

What kind of oil to fill?

The choice of lubricant should be based on the regulations that are prescribed in the technical passport of the car. Both mineral and synthetic oils are suitable for replacement:

• Mineral or oil. Pretty viscous. They quickly lose technical qualities. For old-style cars - the best option;
• Synthetic oil. The composition of the product is better than that of the previous substance. Does not lose properties at low temperatures, is stable and has excellent viscosity and fluidity. The long service life is due to the fact that the components do not disintegrate during operation.

If you don’t want to buy a not very high-quality mineral lubricant, and a synthetic one hits your pocket hard. It is best to opt for semi-synthetics: a mixture of high-quality mineral substances with synthetic components.

Oil change steps in a Hyundai Porter engine

Preparation for work is based on an express inspection of the car and diagnostics of spare parts. It is important to establish the degree of complexity of the breakdown and find a solution to eliminate it. Tools are used to solve the problem. At the end, a performance check is mandatory.

Necessary tools for changing the lubricant in the engine:

• container for draining the old substance;
• funnel;
• key;
• set of "heads";
• flyover or pit.

When changing the oil in a Hyundai Porter engine with your own hands, it is necessary to drain the old fluid, fill in a new one and, if necessary, flush the engine.

How to drain oil?

Sequencing:

• Install the machine on the territory where it will be comfortable to drain the old liquid. It is best to use a repair pit or overpass to facilitate access to the power unit;
• Stop the engine;
• Carefully unscrew the drain plug, as the engine may be warm and drain the old substance. This process may take some time as the viscous grease flows out slowly.

If you follow the procedure correctly, then approximately 3-4% of the waste substance will remain at the bottom of the engine.

How to clean the engine?

It is not necessary to clean the engine. Depends on the degree of contamination, the quality of the old mining and the presence of unknown impurities. If the exhaust was with many additional components, it is better to clean the engine with a flush mixture. If this is not done, the remaining particles of the old oil will negatively contact the components of the new one.

Step-by-step instruction:

• After draining the old fluid, it is necessary to change the oil filter;
• Pour in the flushing agent;
• Start the engine and warm up to operating temperature;
• Drain the wash solution.

Checking the filter affects the quality of the initial result of an oil change. If the filter is dirty, the oil mixture may continue to flow.

How to fill in new oil?

Procedure:

• Pour new oil into the engine using a funnel;
• During the filling period, you need to monitor the volume of liquid with an oil dipstick;
• Initially, it is necessary to fill in 75% of the volume of oil from the norm and warm up the engine;
• Then add the rest.

At the end of the procedure, the engine is warmed up at idle. Next, the fluid level is checked again.

Replacement frequency

Factors affecting the frequency of oil changes:

• The nature of driving;
• Intensity of exploitation;
• Engine condition;
• Seasonality.

The duration of use depends on the quality of the products that are poured into the motor. You need to change the oil in the engine every 8-10 thousand kilometers or when there are signs of the need for replacement.

Changing the oil in Hyundai Porter mini trucks is a mandatory technical procedure, the timeliness and correctness of which determines the life of the car engine. You can change the oil yourself, but it is best to entrust this work to the professional craftsmen of the Porter Auto Service Center in Moscow.

When should the oil be changed?

In accordance with the manufacturer's recommendations, an oil change for Hyundai Porter 1 and 2 is performed every 10-15.000 km (for new engines). Moreover, this figure is optimal for driving on a factory test site. If the truck has a high mileage and is constantly in use, the oil must be changed already at 7,000 km (early change). At the same time, it is necessary to replace the fuel and oil filters - the car has an oil cooling circuit, which requires high oil purification. It is also advisable to change the air filters of the turbocharger. This is important if you do not want to put the engine in for an expensive overhaul later.

It should also be borne in mind that in the process of urban operation, the car often gets stuck in traffic jams, or moves a lot with variable loads. This inevitably wears out the engine. In such conditions, experienced Porter owners carry out maintenance every 6,000 km, which guarantees a long service life of the truck.

Entrust the replacement of oil, fuel, oil and air filters to the specialists of the Porter Auto Service Center in Moscow, and we will perform a full range of maintenance quickly and professionally. Our oil change prices are the lowest.

Oil change procedure in Hyundai Porter

Hyundai Porter is usually equipped with turbodiesel engines that require Hyundai Classic Gold Diesel Engine Oil branded engine oil. Semi-synthetic imported analogues are also allowed.

The oil change in the Porter engine in Moscow is carried out according to the established algorithm. Necessary:

• warm up the engine / cool it down to operating temperature;
• remove the engine tray;
• unscrew the crankcase drain plug;
• drain mining (5-6 liters);
• remove the fuel and oil filters in parallel;
• assess the presence of impurities in the mining by the shade of the drained mining (whether the engine needs to be flushed);
• install a new oil filter and lubricate the gasket on the housing;
• screw the drain plug and fill in the oil;
• check the oil level in the crankcase with a dipstick (between the min and max marks).

The specialists of the Porter Auto Service Center perform a full range of maintenance, and will definitely remind you of the need to replace filters when changing the oil. You can buy original fuel, oil and air filters from us. The cost of changing the oil for the Hyundai Porter is minimal for the capital market.