What wheels are suitable for Hyundai. Tires and wheels for Hyundai H1, wheel size for Hyundai X1. The main features of choosing tires for Hyundai

The famous Korean brand Huyndai is one of the largest leaders in car production. Among them, such a popular model as the Hyundai Accent stands out. If we are talking about the Russian market, then this car model still remains one of the best-selling.

Other popular cars include the compact crossover Greta and the comfortable Getz. Passenger cars with all-wheel drive sedan and hatchback types are equipped with tires with standard sizes from 16 to 17 inches.

As for the 16-inch size, such wheels are equipped on many modifications of Hyundai cars. This figure is minimal and thanks to it you can save on the purchase of additional and cost-effective options.

In addition, it is worth highlighting the fact that the hub is used for an entire set of rims. Therefore, a car enthusiast can easily re-equip the car.

Tire and wheel sizes for Huyndai

Typically, Hyundai sedan and hatchback vehicles are equipped with wheels of the following sizes: R15, R16, R17. The South Korean crossover Hyundai Creta is equipped with 16- and 17-inch models from the factory.

As for the size of tires, it is worth highlighting the following configurations:

215/60/R17;
205/65/R16.

Basic parameters of the disk:

departure ET48-45;
hole for centering 67.1;
wheel bolt pattern 5 to 114.3.

If the car owner decides to order rims, then you need to use the 6.0J/16 marking. Samples with a total diameter of 17 inches are equipped on crossovers with all-wheel drive axles according to factory specifications and recommendations.

These are Hyundai cars with 4WD function and a six-speed automated transmission, as well as mechanical equivalents.

Greta cars on 17-inch wheels

There are situations when owners of Hyundai crossovers forget that only four discs are included in the overall package. Mostly, the basic spare tire is 16 inches.

In this situation, when replacing a punctured wheel, serious repair work will be required. Therefore, if you use 17-inch wheels, you also need a similar spare wheel.

The main features of choosing tires for Hyundai

Assembly shop of one of the Hyundai Motor plants

If we are talking about basic tire configurations for Hyundai cars, then it is worth highlighting summer and winter tires. The original modifications of the Creta do not include track equipment. That is, each buyer individually chooses the car’s equipment.

The size of tires plays a very important role, since the safety, dynamic performance, handling and fuel consumption of the car depend on such components.

The main advantage of the new product from the Korean manufacturer is the equipped pressure sensors.

Many Hyundai dealership centers do not recommend using the services of private car services for wheel replacement and re-adjustment, since many specialists, even with extensive experience, can damage specially equipped sensors that regulate tire pressure.

Naturally, manufacturers do not provide a guarantee for such elements, so you will need to pay extra for a new set of sensors.

Classic readings from these devices should reveal the following values: 2.3/0.07 kg/cm. If the tire pressure begins to drop and the following readings are detected: 33/1.0 psi, then a special indicator lights up on the dashboard, that is, the lamp begins to blink.

Upgraded Hyundai configurations with tubeless tires, as a rule, do not cause defects during normal use of the car.

Basically, the sensors are triggered at the moment of any deformation of the tire. To determine the exact pressure in the wheel, you must use the Super Vision electronic device.

Disc offset and sizes

Korean Greta models are very popular due to not only their aesthetic qualities, but also their high quality of workmanship. Basically, potential buyers, wanting to purchase this crossover, consider it as a vehicle for many years of use.

After a certain amount of time, many owners perform restyling. Especially in cases where crossovers are equipped with 16-inch wheels that do not match the exterior appearance of the car. The use of more massive samples will improve the appearance of the Hyundai and adjust the handling.

light alloy wheels with standard sizes 205/65/R17. Thus, this indicator is used to mark a 6.5*16ET48 wheel. Disc width is 6.5; wheel offset 45 and rim diameter 17;
stamped with standard sizes 205/65/R16. General readings are 6.5 * 16ET45, for which the number 15 indicates the rim size, 45 is the wheel offset and 6.5 is the disc width.

General configuration for all rim models:

centering hole diameter DIA 67.1 mm;
drilling performance PCD 5*114.3;
fastening nuts M12*1.5.

Disc bolt pattern

These indicators determine the diameter of the holes for fasteners. The wheel is installed using special bolts.

The accepted standard PCD is used as the international abbreviation used for passenger cars. If the vehicle owner encounters the letters LZ, then this indicates the number of holes.

Fans of restyling should pay very close attention to this indicator. Immediately before purchasing disks, consultants from specialized Hyundai departments select special bolts according to the general markings recommended by the manufacturer.

However, some car owners prefer to independently find bolts that match the standard indicators of the fasteners.

As for the bolt pattern, this figure should be 5 * 114.3. This value must be taken into account for those who wish to use wheels separately from discs. If certain violations of the performance of components are observed, this can lead to a deterioration in the performance of the suspension and its individual components.

Car wheels for Hyundai Getz

The popular Korean model Goetz is produced in several powertrain configurations. Thus, manufacturers recommend the following indicators for disks with diametrical sizes of 14, 15 and 16 inches.

Drilling and size indicators are 4/100 and 5.5j*14, respectively. In addition, you can install rims with the following parameters: 7*16, 6*14, 6*15, 6*16. The hub diameter is 54.1.

To determine the required wheel parameters as accurately as possible: bolt pattern, hub size, offset, it is recommended to select the vehicle modification and the volume of the Hyundai Getz power unit.

Basically, Korean manufacturers produce Getz cars with standard wheel parameters 6*15ET46. In addition to standard configurations, the car enthusiast can choose the following sizes: 6.5*15ET40, 7*16ET40.

When it comes to fasteners, the Hyundai Getz uses four nuts. When installing the wheel, for some modifications it is necessary to use special alignment rings.

After choosing a disk, you need to select tire sizes. General sizes may be offered in factory versions or similar replacements for larger sizes in accordance with manufacturer's instructions. It is very important to take into account the fact that the radius of the selected rim cannot differ from the fit of the wheel.

Car wheels for Hyundai Accent

To correctly select wheel rims for a Hyundai Accent model, you need to use the general recommendations from the car manufacturer. First of all, we note the fact that this model uses diametrical sizes with indicators of 13, 14 and 15 inches.

A large disc element will not fit on the Accent, since the height of the fender liner does not allow the installation of larger discs.

The optimal wheel option is tires with standard sizes 185/65/R15, recommended by the manufacturer. If we are talking about wheels for Hyundai, then the relevant configurations are 5.5j4*100 ET47 or similar replacement options with 6.5j4*100 ET35-48.

Hyundai Accent is one of the most popular cars in the world. The model continues to be a bestseller on the Russian market for many years. The 5-door front-wheel drive car represents class “B” (small medium). The Hyundai Accent is available in hatchback and sedan body styles.

The main competitors of the model in the domestic market are Volkswagen Polo, Renault Logan, Lada Vesta and Kio Rio. The undoubted advantage of the Korean product is its accessible service and low cost. Even original spare parts for a car are relatively inexpensive. It should also be noted that it is economical and resistant to corrosion. According to these parameters, the model surpasses its competitors.

Hyundai Accent is the first independent development of the Korean brand. Product release began in 1995. The initial generation was carried out in the “biodesign” style. The Accent became the first Hyundai car to receive its own unit (previously the manufacturer used Mitsubishi engines).

The car has become one of the most successful “brainchildren” of the Korean brand. The appearance of the Hyundai Accent I turned out to be very unusual and stylish. The model received a streamlined body with many smooth lines. A rather large bumper and a small radiator grille appeared in front. The company nameplate was placed on the hood. The front design is complemented by narrow headlights. From behind, the model turned out to be completely inconspicuous.

Inside, everything was as budget-friendly and simple as possible. The Koreans saved on finishing materials, but made a very attractive interior. In terms of the quality of materials and assembly, the Hyundai Accent I was significantly superior to domestic products.

The technical characteristics of the model also attracted attention, among which the ease of control and good engine performance stood out.

Wheel and tire sizes

Hyundai Accent I arrived in Russia only in 1999. The car was available with different transmissions (“manual” or “automatic”) and engines:

1. 1.3-liter engine (60 hp):

4.5J wheels on 13 ET46 (4.5 – width in inches, 13 – diameter in inches, 46 – positive offset in mm), tires – 155/80R13 (155 – tire width in mm, 80 – profile height in%, 13 – rim diameter in inches);
5J wheels on 14 ET40, tires – 175/65R14.

2. 1.5-liter unit (92 hp):

4.5J wheels on 13 ET46, tires – 155/80R13;
5J wheels on 13 ET42, tires – 175/70R13;
5J wheels on 14 ET40, tires – 175/65R14;
6J wheels on 14 ET38, tires – 195/50R14.

Drilling and tire pressure

The remaining characteristics of the wheels of the modifications were similar:

PCD (drilling) – 4 by 114.3 (4 is the number of holes, 114.3 is the diameter of the circle on which they are located in mm);
fasteners – M12 by 1.5 (12 – stud diameter in mm, 1.5 – thread size);
diameter of the central hole – 67.1 mm;
tire pressure – 2.1 bar.

Generation 2

In 1999, the second generation Hyundai Accent premiered. The new model has noticeably increased in size (by 130 mm in width and length). The body design was made in accordance with the latest developments of the Korean brand. At the front, the large slope of the windshield and the low sloping hood stood out, thereby reducing the drag coefficient. The front end has been almost completely redone. The radiator grille has become larger and has a lattice structure. The nameplate migrated to it from the hood. The headlights were made angular and placed closer to the sides. Hyundai Accent II turned out to be more classic and lost its former lightness.

Significant changes have also taken place inside. The Korean manufacturer has completely revised the front panel and finishing materials. The interior has become more comfortable and functional, and the driver's seat has received greater visibility. The one-piece design of the instrument panel ensures good ergonomics. Each element was placed as thoughtfully as possible, and clear background lighting made the viewing area excellently readable. The level of noise insulation in the model has been increased.

The Hyundai Accent II tested a unique system that prevents fuel that has heated up in the engine area from flowing back into the tank. This solution increased the efficiency and environmental friendliness of the car. All body types of the model had a rigid suspension with 2 anti-roll bars.

Hyundai Accent II was offered with a variety of power plants (in addition to gasoline, diesel options also appeared). However, only 1.5-liter (102 hp) modifications with “mechanics” or “automatic” were available on the Russian market.

Wheel and tire characteristics:

5J wheels on 13 ET46, tires – 155/80R13;
5J wheels on 13 ET46, tires – 175/70R13;
5J wheels on 14 ET46, tires – 175/65R14;
6J wheels on 14 ET46, tires – 185/60R14;
6J wheels on 15 ET38, tires – 195/50R15.

Some other wheel characteristics have also changed:

PCD (drilling) – 4 per 100;
fasteners – M12 by 1.5;
diameter of the central hole – 54.1 mm;
tire pressure – 2.1 bar.

Since 2001, production of the model began at the Taganrog Automobile Plant in Russia. Due to the localization of production, the cost of the car was reduced by 15-20%.

Generation 3 (Hyundai Verna)

The third generation of Hyundai Accent was presented in 2006 in Detroit. The model received a completely new interior, body and line of power units. The update wasn't very successful. Thus, the Hyundai Accent III never found its buyer on the Russian market. Production of the model ended in 2010. It is noteworthy that the Korean automaker did not stop the production of the second generation, selling two generations of the car at once.

External changes affected the front part of the car. The model received a new radiator grille, reminiscent of a similar element in some Toyota products, a redesigned bumper and new head optics (LED headlights were optionally installed). The third Hyundai Accent has become more streamlined and sporty. The rear of the sedan has also changed somewhat, becoming more massive.

There were more transformations in the interior. Among the external changes, new instrument lighting should be noted. In addition, the interior received new features and finishing materials. The steering column was adjustable in both height and reach.

On the technical side, the Hyundai Accent III has remained virtually unchanged. The model was built on the previous platform. The engineers did not change the suspension, shock absorbers, steering settings, springs and other elements. The only innovation was the overhang increased by 20 mm.

The model was offered with 2 power plants: 1.4-liter (95 hp) and 1.6-liter (112 hp) units. They were combined with a 4-speed automatic transmission and a 5-speed manual transmission.

The wheel parameters were the same for all modifications:

5J wheels on 14 ET39, tires – 175/70R14;
5.5J wheels on 14 ET46, tires – 185/65R14;
5.5J wheels on 15 ET46, tires – 195/55R15;
6.5J wheels on 16 ET47, tires – 205/45R16.

Generation 4 (Hyundai Solaris)

The debut of the fourth generation Hyundai Accent took place in 2010. In Russia, the model is known as Solaris. Moreover, the model was additionally adapted for the domestic market. It received a galvanized body and certain settings that allow it to feel more confident on Russian roads. The Korean automaker offered the Hyundai Accent IV at a very low price. The result was not long in coming - the model quickly became a bestseller on the domestic market. Now Solaris is one of the most popular cars among Russians.

The model received a futuristic appearance, which was liked by many. The voluminous body and slightly elongated headlights fit perfectly into the new “flowing lines” design concept.

Inside, the fourth Hyundai Accent is also freshened. There is a new dashboard and improved finishing materials. The list of offered options has been significantly increased.

The model was equipped with one of two 16-valve units: 1.4-liter (109 hp) and 1.6-liter (124 hp). They were combined with a 5-speed manual transmission or 4-speed automatic transmission.

The wheel and tire parameters were as follows: