The need to purchase rims may arise for various reasons. Firstly, installing new wheels may be required if the old ones are severely damaged and deformed after hitting a deep pothole at high speed. Secondly, the reason may be the car owner’s desire to update the exterior of his car, decorate it and give it a more presentable look.
Also, some motorists purchase additional sets of wheels for use with tires of the appropriate season, so as not to spend extra money on tire fitting services every year. Some wheels may have summer tires, while others may have winter tires. In this case, the driver, if necessary, can independently rearrange the wheels without visiting a tire service station.
To avoid difficulties when installing wheel rims, it is necessary to select them correctly in size. If you do not know the exact size of the wheels on your car, you should find out by studying the service book for the car. It must indicate all the necessary parameters - the width and diameter of the rim, the amount of overhang, drilling characteristics and the diameter of the central hole. You can also consult with the employees of our online store - just tell them the make and model of your car, and specialists will select wheels of the appropriate sizes.
If you are going buy wheels for a car, when choosing, pay special attention to the following characteristics:
- Departure. It is recommended to use wheel rims with an offset whose value matches that indicated in the service book for the vehicle. But if wheels with the required offset are not available or the available options do not suit the design, you can select products in which this parameter differs by +- 5 mm (for a car under warranty) or by +- 15 mm (for out-of-warranty cars ).
- Hub hole diameter. As in the previous case, if necessary, you can buy wheels in which the size of the hub hole exceeds the standard one for your car. But when installing such wheels, you will need additional devices - centering rings. With their help, you can install wheels on cars whose diameter of the hub holes is larger than the standard ones.
- Rim diameter. If you do not have the desire or opportunity order wheels With the diameter recommended by the manufacturer of your car, you can choose wheels one size larger or smaller (for example, R13 or R15 instead of the standard R14). It is important that the wheels match all other characteristics - in particular, drilling parameters. It is worth considering that the use of rims of a “non-original” diameter leads to a slight distortion of the speedometer and odometer readings. Also, too large wheels can touch the wheel arches when the car body sag on holes, bumps or during sharp turns when the car rolls.
- Sverlovka. The drilling parameters on new wheels must match those of the standard wheels on your car. Otherwise, you simply will not be able to install new rims. It is also worth considering that some disc models have double drilling. This allows you to use one set of wheels on two different cars. For example, wheels with a 5x100/108 drill are suitable for cars that use wheels with both 5x100 and 5x108 parameters.
Our range
We can do it inexpensively buy wheels two main types - cast and stamped. Each type of wheel has its own advantages and disadvantages:
- Alloy wheels look more aesthetically pleasing and stylish. They weigh less than stamped ones because they are made of light alloy materials. Such wheels give the car a presentable appearance and do not require the use of decorative caps. But you need to remember that cast wheels cannot be repaired and can burst under strong impacts, while stamped wheels only become deformed under the same conditions.
- Buy stamped wheels can be much cheaper than cast ones. In terms of aesthetic properties, such wheels are noticeably inferior to alloy wheels, but they are more resistant to shock loads and are easily restored after damage. They are often used as winter wheel sets because steel withstands extreme cold better than alloy materials (which also become more shock-sensitive).
Order discs (cast or stamped) you can right now. To do this, enter the required wheel parameters (offset, hub hole diameter, drill type, etc.) in the search filter fields, and only those models that are suitable for your car will remain on the page. After that, move the selected product to the "Cart" and create an online order. All details can be discussed with our consultants by calling the phone number listed on the website.
Precise selection of wheels and tires: you can’t go wrong with RU-SHINA
We suggest you do it directly on our website. This will take no more than 1 minute, and you will be confident that the proposed options are guaranteed to fit the car and will not change its driving characteristics.
Selection of tires and wheels by car make: features of the procedure
Our website has an extensive database of tires and wheels for cars of various makes and models. When forming it, data obtained directly from manufacturers is used, which allows you to avoid errors in selection. We regularly make the necessary changes to the database (with the release of restyled models, after a change of generations, etc.).
Implement selection of tires and wheels by car make on our website you can do one of two things:
- Using the form with drop-down lists located at the top of the page
- Step by step selecting your car from the list of available ones
In both cases selection of tires for a car and disks is carried out according to the following principle:
- You need to choose a manufacturer
- Next, indicate the car model
- Then select the year of manufacture
- After that - modification
IMPORTANT
When selecting tires and wheels for a vehicle, we recommend specifying all parameters, including modification (engine). This is due to the fact that even for cars of the same model year, different standard sizes can be provided. And if you ignore this, the wheels or tires may simply not fit into their proper place (the bore diameter, the number of holes, the distance between them and other parameters will not match), or the driving characteristics and handling of the car will noticeably deteriorate. When selecting on our website, this situation will not happen, because... the system will offer options ONLY AFTER FULL DATA about the car has been specified.
Selection results:
Carrying out selection of wheels for a car specific brand and model, after entering the necessary data, you receive results indicating the number of units available. Doing selection of tires for a car or wheels on our website, you will have to choose from offers that include original products, as well as tuning options. Moreover, all alternative tires and wheels offered by RU-SHINA have sizes that are within the tolerance specified by the manufacturer. And their installation on a car will not affect its behavior on the road and safety.
Car wheels are not only a fashionable accessory that can transform the exterior of your car, but also the basis for the car’s handling and reliable grip on the road surface. The products presented today are divided into three main categories:
- stamped discs;
Stamped wheels consist of a disk and rim, joined by welding. There are openings on the body of the products that provide ventilation for the calipers. Such products are made from rolled metal by stamping, after which they are treated with a primer or varnish, which prevents the formation of rust.
Stamped car wheels have a number of advantages, including:
low cost;
increased reliability;
Possibility of use when driving on uneven roads.
In an emergency or when hitting a large hole, the products are deformed (rather than broken), which can be simply corrected in most modern service stations. The appearance of the devices can be decorated with caps.
An alloy or cast car wheel is cast from a special aluminum alloy that can withstand critical loads. During manufacturing, the alloys are poured into a special mold and cooled in a vacuum environment to minimize defects. Aluminum is difficult to contaminate due to the formation of a protective oxide film upon contact with salt. In addition, such car wheels have significantly less weight than similar products of other classes.
The advantages of light alloy models also include a wide variety of shapes and colors, which allows the driver to express his individuality.
Prices for alloy wheels range widely. Suffice it to say that aluminum wheels are installed on cars by manufacturers already in stock configurations, not only on premium, but also on budget cars. Popular manufacturers include Russian companies Vicom, K&K, as well as foreign ones - Alessio, AEZ, BBS, Artec, Rondell.
Forged wheel rims are also made from magnesium and aluminum alloys. These samples have the highest price among the products presented, but they also have the greatest margin of strength and durability. Forged wheels have a multi-stage fiber structure, which significantly increases their load-carrying capacity.
Models have increased resistance to the formation and spread of corrosion. Aerodynamic tests show that this particular type of wheels can increase the acceleration speed and maneuverability of a car. Even under the influence of maximum loads, such devices do not bend or crack. Due to the high price, forged wheels are installed mainly on premium cars and sports cars.
When choosing wheels for your car, you must take into account the expected cost, purpose of use and place of application of the devices. Alloy wheels are suitable for connoisseurs of exquisite design, forged wheels are an option for motorsports athletes and tuning enthusiasts, and stamped models are suitable for thrifty people who value reliability.
The Express-Shina website in Moscow presents a wide catalog of wheels for every taste. You can place an order by calling the call center or leaving your contact information in the online application. Our managers will provide all the information you are interested in about the selected product.
It will take no more than a few minutes to find the required position.
How to use the catalog of rims by car make?
The site has an online tool for quickly selecting products of interest. Wheel parameters by car make will be found after you specify in a step-by-step mode:
- The model of car;
- year of its release;
- design differences or modification features.
Next, the system will automatically display information about wheel sizes by car make. You will be able to see not only the factory equipment, but also see suitable replacement options (if available). Thanks to this, even a person who is poorly familiar with the features of the machine will be able to purchase a suitable kit.
In any case, before purchasing, read the information about wheel sizes for the car model specified in the service and operating instructions. If you have any doubts, consult with the specialists of the online store website or with employees of the official dealership. Remember that deviations are unacceptable and will lead to either the inability to use the purchased product or problems with driving safety.
You can select alloy wheels for your car online; purchase orders are also accepted by contact phone numbers.
It is sometimes not easy for many novice car enthusiasts to choose their own iron friend. This is because their labeling reflects a large number of parameters and characteristics. This article will discuss the method of deciphering the size of the disk and choosing it for the car.
Reading characteristics
The entire string of parameters printed on the disk can be divided into several components. It might look something like this: 7jx16 H2 5x130 ET20 d74.1. To decipher the disk sizes, you need to consider each element in order.
It is worth noting that sometimes the location of parameters in a line can be swapped and differ slightly in characters. But the general algorithm for deciphering disk sizes on a car is always the same.
Width
The width of the rim is indicated in inches and comes first in the characteristics line. In fact, this is one of the determining parameters when choosing. Based on this value, the tire width will be selected in the future. Marking examples: 8.5 12, 9.5.
Experienced drivers claim that greater width significantly affects the handling and dynamics of the car.
Side edge design marker
Immediately after the number with the width of the disk there is a letter value. As a rule, it carries little information for the car enthusiast and is used mainly by service specialists. In most cases it is marked with the letter J. But it can also be JJ, K, JK, B, P, D.
Disc diameter
In deciphering disk dimensions, the design symbol for the side flanges is followed by a numerical value of the diameter in inches. It is also one of the main parameters. Changing the diameter of the rim upward can also change the size of the tire used. And this, in turn, will affect handling on the highway. For example, on low-profile tires, all road irregularities will be clearly felt, and the entire load will fall on the shoulders of the suspension.
Humps
Next in order comes the designation of humps. These are protrusions along the edges that allow the tire to be mounted more securely. Can take values H, H2, X. Here H is a regular hump, X is a truncated one. The coefficient after it is the number of sides on which the hump is located.
PCD
The next parameter in order is sometimes called PCD. It is marked something like this: 5x130. The first number in the entry shows the number of disk mounting bolts, and the second is the diameter at which they are located in millimeters. This is one of the most important parameters when deciphering disk sizes.
The values can vary over very small ranges, down to tenths of a millimeter. Therefore, if the specification is not selected accurately, there is a possibility that the bolts will not be able to fit into place. As a result, the fastener will not be tight. This means that you will then have to carry out frequent balancing and repairs.
Departure
This parameter consists of numbers and letters. Maybe this is ET20. In short, it means the distance between the plane of the disk and can be negative or positive. The first option will visually make the disk more convex relative to the car. The second one is in-depth.
A significant change in disc offset affects the displacement of the steering axle, increases bearing wear and, in some cases, worsens handling. Car manufacturers strictly regulate the size of the permissible overhang, and grossly violating it means affecting some of the car’s parameters, which may worsen.
Center hole diameter
It is measured in millimeters and denoted by letters and numbers. For example, like this - d85. When deciphering disk sizes, you should pay special attention.
Extra options
When deciphering disk sizes, other characteristics can be used. For example, maximum disk load. Passenger cars use discs with a safety margin that should be sufficient for its needs. But if it turns out that it will be moved to another type of equipment, for example, an SUV, then the nearest small hole may damage the disc.
Loads are usually specified in pounds. To get kilograms from them, you need to divide the existing value by 2.2.
When deciphering the sizes of alloy wheels and subsequent installation, it may not fit the car. This condition is called X-factor. And it is connected with the fact that alloy wheels can be of the most varied shapes, while fully complying with the declared and required dimensions. Therefore, to avoid buying an unsuitable model, you should first install it on the car, at least with a couple of bolts and turn it slightly. If nothing interferes or rests, then the disc is ideal for the car.
How to choose the right disk?
In addition to technical characteristics, the choice can also be influenced by aesthetic properties, as well as the manufacturing method.
Appearance is chosen based on personal preference. Some people like more spokes, others like fewer petals.
It is also worth knowing that wheels are divided into two large categories: steel and alloy.
Steel or stamped are made from a sheet of metal, which is subsequently joined by welding. This approach makes it possible to significantly reduce the cost of production. In addition, steel wheels are easier to repair and restore. Although this is required quite rarely, since they have good strength. On the other hand, the stamped approach creates inaccuracy in production, which promises problems with subsequent balancing. Also, the significant weight of steel increases the overall weight.
Alloy wheels are lightweight. Their production process allows them to create a wide variety of shapes and designs. They cost a little more, but as a result, aesthetics and practicality take such discs far ahead.
The alloy type is also in turn divided into two categories: cast and forged. The first type has a granular structure, which makes the product fragile. This is a known problem with alloy wheels. When used for a long time on uneven roads, they tend to split.
A forged disc has a fibrous structure, which provides special plasticity and does not allow the disc to form chips and cracks. It is very difficult to deform or destroy it.
A small example of decryption
It is worth making out the markings on a single product. For example, decrypt disk sizes in Valdai. There is this designation - 17x6 6x222.25 Et115 Dia160. Here the first value is the diameter of the disk in inches. This is followed by the width for which the tires are selected.
This is followed by the number of bolts and the diameter at which they are placed. These are 6 and 222.25 respectively. Et115 is a disk offset. In this case, it means that it is 115 mm inward from the mounting plane. That is, the disk is convex.
Dia160 is the diameter of the central hole in millimeters.
Finally
Careful decoding when choosing them will allow you to accurately select the necessary parameters and not become a victim of an unreasonable purchase. Knowing about their characteristics will be useful not only for novice car enthusiasts, but also for more experienced ones.
