The KIA car has long gained great popularity among Russian car enthusiasts. It is equipped with only modern parts that are easy to modify. Discs installed on the machine can be of several types - steel, cast, magnesium.

The most common ones are usually stamped steel. They are made from sheet steel using the stamping method.

At the factory, the machines are equipped with just such products. This is due to their low cost.

Of course, you can install other models on the car, for example, cast ones. But we must take into account their characteristics and the mode of operation of the car. Casting has several negative qualities.

For example, after some time an oxide film may appear on an aluminum surface, which greatly spoils the appearance.

Kia Ceed

It has several body types and different configurations depending on the date of manufacture.

Disc designs can be conventional stamped ones or more expensive light alloy ones made from aluminum alloy.

The diameter of such products is in the range of 15 - 17 inches.

For tuning, you can install 225/40.R18 wheels on the Kia Sid.

Discs	Tires
5.5J x 15 5×114.3 d67.1 ET47.0	R15 185/65
	R15 195/65
6.0J x 16 5×114.3 d67.1 ET51.0	R16 205/55
7.0J x 17 5×114.3 d67.1 ET56.0	R17 225/45

Kia Optima IF

The model began production in 2000. Until 2005, it completely copied the Hyundai Sonata. The only difference was the equipment of the machine and its design.

In any version, the car had wheels with the dimensions indicated in the table:

Discs	Tires
6J x 15 ET45	205/60R15
6J x14 ET45	195/70R14
6J x 16 ET45	205/55R16
7J x 17 ET45	205/50R17

In 2005, the Koreans presented a completely different car. It was completely different from its Hyundai Sonata counterpart. The disk sizes have also changed.

For cars manufactured in 2005-2010, the following are suitable:

Today, a new Kia Optima model is offered for sale on the market, equipped with wheels with the following dimensions:

Discs	Tires
6.5J x 16 ET46	205/60R16
6.5J x 17 ET46	215/50R17
7.5J x 18 ET46	225/45R18

Kia Rio

At the factory, the machine is equipped with models R15 - R16. The main role in choosing parameters is played by the vehicle equipment. By default, Kia Rio is equipped with products with dimensions:

Width	PCD	ET	DIA
6.0Jx15	4 x 100	48 - R15	54.1
6.0Jx16		52 - R16

You can, of course, install disks of a different design. But any of them must correspond to the sizes indicated in the table. Large deviations will lead to deterioration in vehicle dynamics. The suspension will begin to fail and fuel consumption will increase.

Kia Sorento

This mid-size crossover was manufactured by the Korean company Kia Motors. It was shown to the public in 2002 at the Chicago Salon. In the factory configuration, the Kia Sorento is equipped with a 7.5Jx16ET40 disk, the diameter is in the range of 17-19 inches.

Main dimensions:

• 5j x 17,
• 5j x 18,
• 5j x 19,
• 7j x 17,
• 7j x 18.

You can also install other wheels on the car, but with dimensions close to those recommended by the manufacturer.

Kia Soul

The popularity of this brand in Russia is evidenced by the number of cars sold to Russians. This number has already surpassed 10,000. At the factory, the Kia Soul is equipped with 6Jx15 stampings for 195/65 R15 tires.

The mid-spec car is equipped with more expensive 6.5Jx16 alloys. Fits 205/55 R16 tires. The luxury package includes 7Jx18 alloy wheels with 225/45 R18 tires.

• R16 - ET 42-46 mm.
• R17 - ET 44-48 mm.
• R18 - ET 50-55 mm.

Kia Sportage

When selecting wheels for the Kia Sportage, as well as for other Korean cars, it is advisable to follow the manufacturer's recommendations. Of course, to increase ground clearance, you can use discs with other sizes. However, this will greatly change the technical characteristics of the machine.

Factory disk sizes:

• 5Jx16, ET 31.5, DIA 67.1,
• 5Jx17, ET 35, DIA 67.1,
• 7Jx18, ET 40.5, DIA 67.1.

For replacement, you can use disks with the following sizes:

• 7x165/114.3ET39,
• 7.5x165/114.3ET39,
• 7x175/114.3ET39,
• 7x175/114.3ET36,
• 7.5x175/114.3ET34,
• 8x185/114.3ET32.

Kia Spectra

A budget car with 14-inch wheels and 185/65 R14 tires. The wheel arch of the Kia Spectra allows the installation of R15-R16. However, such an increase in wheels can lead to deterioration in dynamic performance and increased fuel consumption.

If non-standard wheels are installed on your car, this can lead to friction and increased wear. Therefore, it is worth adhering to factory standards. Therefore, the correct selection of wheels is an important element.

Wheel looseness

Different wheels have been used on Kia Sid in different generations. Usually this information is indicated in the service book or technical documents of the car. Also, on each vehicle there is a sign that says which wheels and tires are suitable.

Kia Sid wheels.

Characteristics

Let's look at the wheel bolt pattern for the Kia Sid according to the manufacturer's data by year of manufacture and generation:

Selection of wheels.

	Disk size	Disc offset	Sverlovka	Tire size

Kia Cee'd (JD) wheel parameters:

PCD 5×114.3 with diameter from 15 to 16, width from 6J to 6.5J, offset from 45 to 51. Similar parameters to Kia Cee'd SW (JD) 1.6 CRDi 128 2018. Tire size from 15 to 16, width from 195 to 205 and profile from 55 to 65.

Non-standard Kia Sid wheels.

Conclusion

As you can see, quite a lot of tires and wheels fit the Sid, and therefore the car enthusiast can choose what he likes. You can install both simple stamped discs and cast ones.

Using automatic selection of tires and wheels for the car Kia Ceed, you can avoid many problems associated with their compatibility and compliance with automaker recommendations. After all, these components have a huge impact on a whole range of vehicle performance characteristics, from handling to dynamic qualities. In addition, tires and rims in a modern car are one of the active safety elements. That is why it is extremely important to approach their choice very responsibly, using quite specific knowledge about these products.

Unfortunately, only a small part of car owners know such technical nuances. Regardless of this, the automatic selection system will prove to be extremely useful, i.e., it allows you to minimize the likelihood of making the wrong decision when choosing certain tires and rims. And there is plenty to choose from, thanks to the widest range of such products presented in the Mosavtoshina online store.

Surely you will agree that the car will look much better if it has wheels of the original design. That is why many car enthusiasts seek to replace standard wheels with others that are more advanced and attractive. However, in this kind of tuning you need to scrupulously approach the technical parameters of the wheels. The main characteristic that you need to pay attention to is the bolt pattern. In this short article you will learn the wheel bolt pattern of the popular Kia Sid car from different years of production.

Almost the first cars that saw mass production and fell in love with domestic car enthusiasts. They were produced with two wheel diameters:

The above data applies to machines equipped with engines:.

Drilling Kia Ceed 2010

This year the car was subject to modifications and some changes. Cars of this period are quite popular and widespread throughout the Russian Federation and beyond.
This year was equipped with the following wheels:

1. R15 with tire size 195/65, the disc offset is 47 mm, and its size is 15x5.5.
2. R16 with tire size 205/55, the disc offset is 51 mm, and the size is 16x6.5.

The above data also applies to models that are equipped with engines: 1.4L; 1.6CDRI; 1.6L; 2.0L crdi.

All other variants were produced with the following characteristics:

• Wheel size 15x6.0, offset 45 mm, tire size 185/65R15;
• Wheel size 15x6.0, offset 45 mm, tire size 195/65R15;
• Wheel size 15x6.0, offset 45 mm, tire size 205/60R15.

For all specified configurations, the bolt pattern is 5×114.3

Drilling Kia Ceed 2013

The line has been improved, but cars were produced this year with only two engine options:

1. Kia Sid 1.4
2. Kia Sid 1.6

The first option was equipped with wheels with rim size 15×6.0, departure 45 and tire size 195/65R15.

The second option is disk size 16×6.5, departure 46 and tire size 205/55R15.

Both configurations have a bolt pattern of 5×114.3.

It is worth noting that all cars of this model from different years of production have the same drilling (5×114.3), so it is almost impossible to make a mistake in its selection. The only thing you need to pay attention to is the tire sizes and other parameters.

In the vast majority of cases, the selection of tires and wheels for a car Kia Ceed 2011 allows you to significantly reduce the time it takes to find a suitable option.

Without this option, the buyer had to manually search among several thousand items in the extensive assortment of the Mosavtoshina online store. At the same time, there is a very high risk that the chosen option will not be suitable for the car. After all, this requires car owners to have certain knowledge in this area, which most of them cannot boast of. To use all the capabilities of our automatic selection system, you only need to know the make, model and year of manufacture of your car. This information is indicated in literally a few clicks of the computer mouse on the corresponding inscriptions on the screen. This information seems scant only at first glance. There are more than enough of them for the car owner to end up with a list consisting of at least several models of wheel rims and tires, each of which very closely corresponds to the recommendations of the car manufacturer.