Clean headlights in the car - the key to safety on the road. - modern, necessary, convenient, automated option. Installed headlight washers are a guarantee of safety and comfortable driving on polluted roads, at any time of the day, in adverse weather conditions.

In our certified service center, professionals in their field will help you install the headlight washer. We have all headlight washer kits in stock.

Install the headlight washer at a professional installation center

Installing a headlight washer consists of several stages of work:

• Selection and selection of a headlight washer kit for your car model. We have Sho-Me wash kits and Hella headlight washers in stock.
• Preparation for installation.
• Washer installation.
• Checking the operation of the system.

Washer installation may be due to the difficulties of the lack of regular places for the washer. Telescopic headlight washers are practically invisible on the bumper body, only at the moment of switching on they extend and flush the dirt from the headlights.

You can install the headlight washer in our specialized center. Do not hesitate, our experts will select and install the best washer kit for your car, which will meet all the parameters of reliability, convenience and safety.

Every car owner strives to improve the comfort and convenience of travel. However, manually cleaning the headlights spoils the pleasant experience. Today, this process can be automated by installing a headlight washer with your own hands, and it does not require large financial costs and effort to install the equipment.

Headlight washer design

Today you can choose the best cleaning system for almost any optics. There are two types of headlight washers: brush and jet. The first option, despite its efficient operation, is difficult to install, since it is necessary to introduce a brush mechanism near the surface of the headlight glass. Do not forget that the installation of equipment requires additional resources, and this creates an extra load on the battery, which can be discharged at the most inopportune moment. In this design, a certain amount of washer fluid is supplied, and dirt is removed with a brush. It is not recommended to install this type of cleaner on headlights where plastic is used as a protective element, since over time the surface will become covered with many small scratches and become cloudy. Unlike the previous version, the jet washer delivers high-pressure fluid and can be installed on almost any type of headlight. This mechanism is easy to install, since there is no brush in the design.

Main components

1. Pump. Its function is to supply fluid to the device's atomizers. The part injects pressure of the order of 0.2 MPa.
2. Washer fluid reservoir.
3. Connecting tubes. Through this element, liquid from the tank enters the nozzles.
4. nozzles and fasteners. There are two options: telescopic and stationary.

The headlight washer kit includes all the necessary elements for installing the system in accordance with the attached instructions.

In addition to the listed elements, a block with fuses and wires are used to assemble the device, which are used to connect to the vehicle's electrical wiring, and the operation of the washer is also controlled. Depending on the brand of the machine, the design may differ in terms of configuration compared to the standard set. It depends on the installed optics and bumper design. At the same time, choosing the right option will not be difficult. For self-installation of the system, in addition to the listed elements, you will need:

• heat-shrink tubing;
• set of screwdrivers;
• plastic ties.

The principle of operation of the headlight washer

The operation of the device is simple. The liquid spray mechanism (nozzle) is mounted on the front bumper and can be either fixed or retractable. Washer fluid for sprayers is supplied from the windshield washer reservoir, but separate containers can also be used. Through the tubes, the liquid enters the nozzles and is sprayed onto the headlight glass under high pressure. If retractable washers are installed, then at the end of work they fall into place.

Features of choice

To choose the right washer kit, first of all, you need to take into account the design features of the upper part of the bumper and the optics glass. Headlight washers differ in the type of nozzles:

• for flat bumper;
• for spherical bumper;
• for SUVs.

You can buy a device for a specific car model or a universal kit. The latter option is preferable if you approach the choice from a practical and economic point of view.

Washer nozzles are selected taking into account the design of the bumper and headlight glass. Only in this case, you can count on the correct operation of the system.

Detailed DIY installation instructions

The headlight washer can be installed on any car. First of all, you need to purchase all the components that correspond to a particular brand, and are also combined with the overall design. It is worth considering that there are kits that include a nozzle cover, which will eliminate the need to drill the bumper. This is due to the fact that all communications are mounted on it. Plus, the kit should include installation instructions, a tank (may not be included), a pump, tubes, a relay. When everything you need is prepared, you can proceed with the installation.

1. Regardless of the set chosen, work begins with an examination of the windshield washer reservoir for an additional tube insert. If for some reason this is not possible, then we are looking for a place to install an additional tank that comes with the device. It is important to know that it is desirable to place the tank away from elements that are subject to heat.
2. The next step is to find a place to install the injectors. The ideal option is to mount opposite the center of the headlight. To calculate it, it is enough to take a closer look at the diffuser: the optical center has a designation in the form of a circle.
3. Having decided on a place for the sprayer, we drill a hole on the bumper. You need to start with a small diameter, gradually increasing it to the appropriate size. The procedure is performed carefully and from the outside in order to avoid raising the paint.
4. We manufacture injectors. For the best combination with the body, the best option is selected in advance.
5. We proceed to install the tank and pump. The installation process may vary slightly, depending on the specific kit.
6. We carry out communications. It is necessary to choose the shortest distance.
7. It remains to connect to the electrics: we connect the pump to a common electrical circuit, and display the control on a separate button. It can also be connected to a windshield washer. On which option to stop, everyone chooses for himself. If we consider the installation of a separate button, then there will be additional troubles in choosing a place, connecting. When mounted on a regular washer, fluid consumption increases.

Video: how to put a headlight washer on an Audi A6

How to turn on and check the design correctly

The optimal mounting location for the control module is the ignition unit and the alarm column, but there may be other options. In this case, the white wire is connected to the positive terminal of the clearance lamp. Then the red wire is connected to a voltage source through a fuse. The red and black wires that come from the same bundle with white are connected to the "+" and "-" washer. The remaining blue wire is connected to the positive contact of the cigarette lighter backlight or to the contact responsible for turning off the dimensions. After the design is assembled, you need to test it. To do this, pour washer fluid or clean water into the tank and evaluate whether the nozzles work and how spraying occurs.

Operation and repair

The operation of the device in question will depend on both the equipment itself and the installation option. If the washer is combined with the wiper button, the fluid will be consumed faster and the reservoir will need to be filled frequently to supply it under high pressure. To reduce consumption, the device is connected to a separate button, which is located in a convenient place. The operation of the system from a separate button justifies itself, especially in winter, which avoids the failure of the device. Proper operation of the headlight washer requires periodic use of the system. This will not only prevent contamination of the atomizers, but also increase the life of the device.

In winter, the washer nozzles become clogged with dirt and freeze, which prevents the device from working properly. Therefore, periodic cleaning of the element is necessary.

It is worth saying a few words about operation in the winter. Some car owners, in order to avoid washer breakdowns, take out the fuses in the power circuit for the winter. Since at low temperatures the nozzles become dirty and freeze, this leads to difficulties in their use if not cleaned. For example, retractable washers simply freeze to the bumper, which leads to pump failure.

Why the washer does not work - common reasons

To prevent washer failure, regular use of the system is required. In cases where there is no need to use the device, it is required to use it from time to time, at least once a week, which will eliminate the malfunction. If it was found that the system, although it works, does not return to its place after cleaning the headlights, you should not resort to drastic measures and immediately replace it. You can try to fix the problem yourself. The reason why the washer does not return to its place, as a rule, is the dirt inside the mechanism. There are times when performance can be restored by applying a penetrating fluid like WD-40, which is used to lubricate the skids and help them to fall into place. But this option does not always help. In this case, you can resort to another method of repairing the device.

After some time of operation of the headlight washer, a leak may appear from the pump, which requires troubleshooting

The procedure is simple and effective. To do this, you need to go to the track and accelerate the car to 100 km / h, turning on the washer several times. Often this technique helps to “reanimate” the device due to the force from the oncoming air flow. It is considered more preferable than trying to install the nozzles in place by hand, because no extra force will be applied. Well, in general, in order for the device to work smoothly, it must be constantly used. During operation of the system, a leak may appear from the junction of the housing. To fix the problem, you will need to remove the bumper, for which the hoses of the device are disconnected, then drain the liquid from the tank, disconnect the washer from the bumper. With the help of nippers, two parts of the pump should be moved apart - front and back, which will allow you to separate the halves of the housing.

The design of the washer is simple: the engine pressurizes the piston, it extends and opens the spray valve, as a result of which liquid is supplied to the headlight. The piston is returned to its original position by a spring. Over time, the tightness between the cylinder and the body is broken due to the displacement of the rubber seal, which is associated with constant vibrations. The situation can be corrected by installing the ring in place and fixing it, for example, with sealant. After the procedure, the body is assembled and pulled together with a clamp.

How to make the inclusion of a separate button

For the reasons indicated, many drivers are interested in turning on the headlight washer with a separate button. The choice of the details itself should not cause questions.

To turn on the headlight washer, you can select almost any button option, which today offers a wide variety

Consider the installation of a button using the Hyundai Santa Fe as an example. You will need the following tools and materials: Activation of the headlight washer can be displayed on a separate button, choosing the optimal location for it

We work in the following sequence:

1. We start by removing the side and bottom panels. They are attached with four screws and clips. After removal, access to the block will open.
2. Remove the steering wheel trim. Fastening is made with three screws. Similarly, using a spatula, remove the part from the clips. The button will be installed on this skin. In fact, any place can be chosen, as long as it is convenient to manage the system.
3. We make a hole according to the size of the button and fasten it.
4. We connect the wires on the button and stretch them to the block.
5. We connect the wires to the block: we are looking for the yellow wire, which is responsible for the headlight washer and is located in the middle of the block (second from the top). In the break of this wire, you need to connect the button. After connection, it is necessary to carefully insulate.
6. We check and collect everything in the reverse order.

To install a headlight washer on a car, it is not necessary to contact a car service and pay money. It is enough to purchase the necessary parts, familiarize yourself with the connection diagram, determine the installation location of the tank and the button and install it. The process itself is not difficult and even a novice driver can do it.

Having traveled the streets of the city in rainy weather and having wiped the headlights several dozen times, the motorist thinks about installing a headlight washer. The device allows you to easily and comfortably clean the glass of lighting equipment from dirt without leaving the car. There are many devices on the market for every taste, but first you should understand the design features of your own car.

Design

Depending on the design of the headlights, you can choose the best cleaning system option. There are two main types of headlight washers: brush and jet. The brush washer is difficult to install, as it is a mechanism of small wipers on the surface of the headlight glass.

The nozzles deliver a small amount of fluid and the brush removes the accumulated dirt. You should not use this type on headlights with plastic optics, as over time the surface will be covered with many scratches. The jet washer cleans all types of headlights by delivering high-pressure fluid. Installing such a mechanism is much easier, as it excludes a brush from the design.

Main elements

The headlight washer system includes:

• High-pressure rotary headlight washer pump for supplying liquid to the nozzles. The device creates pressure in the system within 0.2 MPa.
• Connecting hoses to ensure that liquid from the tank enters the nozzles. Depending on the selected kit, they differ in material quality and length.
• System control unit.
• Fuse box and wiring to connect the pump to the vehicle electronics and control its operation.
• Tank for liquid. Some kits are missing, as the pump is supposed to be placed in the wiper reservoir.
• Injectors and bumper mounting kit. Depending on the type of placement chosen, they can be stationary or telescopic. The main difference between these types lies in the possibility of a hidden arrangement of telescopic nozzles.

For some models there are special washer kits. They take into account the model of optics and the upper surface of the bumper. In some cases, it is possible to connect the kit to the windshield wiper tank, but often you need to choose a place for installing a separate tank. There are also no particular problems with the installation of a universal headlight washer.

Manufacturers

The main equipment manufacturers on the market are Sho-me and Hella. Sho-me headlight washers will delight you with its price and ease of assembly. The company itself is a typical mass production from China, so it makes sense to opt for the installation of such a mechanism on a modest budget.

Hella, on the contrary, is a typical European manufacturer with its own strict standards and certificates, which affects the price. Therefore, Hella headlight washers are better in quality and have a longer life cycle, but the cost is much higher.

Nevertheless, the installation of a Hella telescopic headlight washer will really please any car enthusiast with its long service life. When choosing such a simple mechanism, it is worth evaluating the need to purchase better equipment and, if possible, save money.

Detailed installation instructions

Installing a headlight washer does not require any special skills and is within the power of any motorist. If the manufacturer does not provide special holes, then you will have to drill them to secure the nozzles. To do this, remove the bumper and carefully make holes on the back side.

The nozzles are placed opposite the central part of the headlights, so you need to carefully measure the distance in accordance with the installation instructions. The exception is bi-xenon headlights, which cannot be used without a washer. In this case, the nozzles are located away from the center of the headlights.

The washers themselves can be repainted to match the color of the car, but for this you need to determine the paint number. We fix the nozzles in the hole made and check the quality of the fastening. Pay attention to the location of the headlight washer nozzle cap.

To install the pump, we drill a hole in the tank and fix it with a rubber band, if necessary, fix the device with electrical tape. After that, we mount the tank in the chosen place and place a special tee valve to distribute the liquid in the system.

Important! Under no circumstances should the tank and hoses be located near units with high temperatures.

After installing the bumper in its usual place, we mount the hoses, the necessary valves and tees. According to the instructions, we connect the headlight washer pump to the car's electronics. If the pump is located inside the wiper reservoir, then without a special headlight washer relay, it will work together with the wipers. If the pump is located in a separate tank, then it will be started by pressing a special button in the cabin. In any case, you can customize its work to your taste.

Connection and testing

The most successful place for installing the control unit is the alarm column and the ignition unit. To do this, the white wire is connected to the positive contact of the position lamp. After that, the red wire is connected through the fuse to the power source. Black and red wires coming from the screed with white are connected to the negative and positive contacts of the washer itself. The blue wire is connected to the positive contact of the backlight of the car cigarette lighter or to the contact for turning off the dimensions.

It is worth testing the assembled system after installation before permanent operation, for this it is necessary to pour a special liquid into the tank, but distilled or boiled water is also suitable.

Important! During operation in winter, water can render the pump unusable.

Operation and repair

Depending on the selected installation option and equipment, operating conditions will vary. If the motorist connects the washer to the wiper button, then the fluid consumption will increase significantly. To create a high-pressure jet, much more wiper fluid is required, so connecting to the standard wiper mechanism will entail constant topping up of the tank.

Turning on the washer only by pressing a special button in the cabin helps to reduce fluid consumption after installation. The headlight washer button will also allow you not to turn off the entire system in the winter, when the use of equipment is impractical and is fraught with breakdowns.

In winter, the nozzles get clogged with ice and dirt, which makes it difficult to use them without thorough cleaning. Telescopic washers freeze to the bumper, which leads to breakdowns of the headlight washer motor. Some drivers for the period of cold weather sometimes pull out the fuse responsible for the operation of the device.

It is necessary to periodically use the mechanism that you have installed in order to avoid contamination of the nozzles. No more than once a week, run the system for a small test. In particular, such prevention is required when using telescopic mechanisms, since the nozzle can get stuck in the grooves.

Depending on the degree of damage and wear of the equipment, minor repairs can be made on their own. Over time, fluid from the system begins to leak from the junction of the washer housing. You can fix this by disassembling the case and fixing the problem. To do this, remove the bumper, disconnect the hose from the system and drain the liquid. Then disconnect the headlight washer from the bumper.

Then we separate the back and front parts, with the help of wire cutters we make several breaks around the circumference of the plastic ring. After that, the body halves can be pushed apart with a little effort. The device of the washer itself is quite simple: the headlight washer motor pressurizes the piston, after which it extends and opens the spray valve, from where the liquid is supplied to the headlight, after which the spring returns the piston to its place. Due to constant vibration, the rubber ring that seals the gap between the cylinder and the housing slides into a wider part of the housing and the tightness of the cylinder is broken.

To correct the situation, you need to reverse the installation of the ring and fix it. This can be done with a thread lubricated with sealant or with a do-it-yourself rubber pad. After that, we assemble the case back and tighten it with a clamp.

Results

When purchasing a car, every motorist seeks to increase comfort and convenience in their constant movements around the city. Unfortunately, manually cleaning your headlights gets in the way of a pleasant driving experience. Especially when it is possible to automate this process without serious financial and effort costs due to the installation of additional equipment. Good road!

Each driver wants to get the most comfortable conditions, so that his car is both beautiful and comfortable from the inside, and does not cause unnecessary trouble. One of the devices that make life easier for the driver is a headlight washer. It helps to avoid the unpleasant pastime for manual cleaning of automotive lighting equipment.

[ Hide ]

Instructions for self-assembly

Perhaps every driver knows what it is, but not everyone has heard about what components it consists of, how to install it yourself, and how to operate it correctly. Proper operation of the purchased and installed device will prolong its life, and save you from having to manually wash the lighting equipment.

Tools and materials

The device includes the following components:

1. Rotary pump. It is installed to supply liquid to the nozzles. Thus, it creates the necessary pressure within 0.2 MPa. The pump runs for exactly as many seconds as the quality of the fluid in the system suggests.
2. Connecting hoses. Thanks to this device, the headlight washer nozzle is enriched with liquid coming from the tank. Connecting hoses can be varied and differ from each other in terms of material and length.
3. Control block.
4. Liquid tank. In some machines, the device may be located in the wiper tank, as their designs are somewhat similar.
5. A set of nozzles and attachments to the bumper of the car. They can be of two types: stationary and telescopic.

The device system also contains a fuse box and electrical wiring. It is designed to connect the pump to the machine system, as well as control its operation. For some cars, the equipment of the device may differ from the standard set. It depends on the model of car optics and the distinctive features of the bumper. In any case, you can choose the right option for yourself without spending much effort and money.

Processes

1. A small hole with a diameter of 15 mm must be drilled in the tank. It is being prepared for the pump.
2. A sealing gum must be installed on the prepared hole. After that, you can install the pump.
3. If the body of the device is worse than the material from which the tank is installed, then the pump must be attached with high-quality electrical tape. Some drivers do it anyway.
4. Next, a tank is installed, next to which a headlight washer valve is installed.
5. After that, you can install the nozzles. They are mounted to the side of the center of the headlight, unless xenon is installed on the low beam switch. The headlight washer nozzle cover must be clearly in place. The calculation can be made using a ruler so as not to be mistaken with the accuracy of fit.
6. After the cover is in place, the hoses are connected to electricity.
7. The headlight washer button takes effect.

How to replace the device with your own hands can be seen in the video from the author Oleg Zuyeff.

Installation Guide

1. To install a universal device, no special abilities are required. The only obstacle that a motorist may encounter is self-drilling holes in the tank to secure the nozzles. To do this manipulation, it is necessary to remove the bumper from the car and make several holes on the back side.
2. The headlight washer cover must be repainted depending on the color of the car. After that, it is necessary to fix the nozzles in the already prepared hole.
3. To install a pump in a car, you need to equip the tank with another hole, then fix the pump with electrical tape. After the work done, you can mount the tank in a pre-prepared place. It is important that the tank is not located near components that are capable of gaining heat.
4. After these steps, you can return the bumper of the car to its place and complete the work - mount the hoses, valves and tees.

Exploitation

Operation will vary depending on the equipment and installation option selected.

For example, if the device is combined with the wiper button, then the fluid flow will increase several times, because to supply high-pressure water, you will have to add fluid to the tank all the time.

To avoid abuse, you can connect the device to a separate button in the cabin. It is also convenient in winter, because then water can ruin the system pump. If the lighting fixtures freeze to the bumper during operation, then the headlight washer motor will be damaged.

For proper operation of the system, it is necessary to periodically test it. This will help prevent nozzle contamination and prolong the life of the device. Some drivers, in order to keep the device in good condition, pull the fuses out of the system when frost sets in.

Video "Installing the device with your own hands"

How to install a headlight washer with your own hands can be found in the video.

It is known that the deterioration of visibility on the road entails a number of problems, ranging from a decrease in the level of comfort for the driver, and ending with the risk of getting into an accident. But the reason can be not only the weather, but also a number of other factors - including contaminated car optics. For this reason, the quality of illumination of the road deteriorates, and the angle of the direction of the beams is distorted.

Contaminated xenon headlights cause light to refract and scatter, which can dazzle oncoming drivers. When dirt appears on conventional headlights, their efficiency decreases by almost 50%, and with further operation - by 80%. To avoid such problems, so-called headlight washers have been developed that clean the surface of light sources at the command of the driver. Today, the device has gained wide popularity and is installed on many cars. If this is not provided, the installation of a headlight washer will help.

Types of automotive optics

Car headlights are made using two materials - plastic and glass. In the first case, it is recommended to install jet type washers, and in the second case, brush washers are suitable. A feature of plastic optics is its low resistance to friction, so the installation of jet (non-contact) cleaners is highly justified. We will talk about the principle of operation of the washer below.

For one cleaning, the jet washer requires 200 ml of pressurized fluid on the outside of the plastic. The removal of dirt from the surface occurs due to strong pressure, so there is no need to add various cleaning agents.

After installing the headlight washer, it is worth periodically checking the reservoir for the presence of working fluid. By the way, the same container is used in the windshield cleaning system, which allows you to fill the tank with plain water (in summer) or special alcohol-containing products (antifreeze) in winter.

Structurally, the jet mechanism consists of the following units:

• A reservoir that contains washer fluid. The volume of the container depends on the number of nozzles installed on the vehicle and ranges from 2.5 to 4 liters.
• Connecting tubes. The length of the tubes is 2-4 meters. This parameter, as well as the diameter, depends on the pressure created and the duration of the injection. The tubes of the system are combined using special plastic connectors (one of them has a built-in non-return valve).
• The pump is a device that ensures operability and creates pressure from 0.2 to 0.5 MPa. This node is part of the machine's electrical system.
• Nozzles - products designed to spray water. There are two types - single and double. When choosing, it is worth focusing on the area of ​​\u200b\u200bthe treated surface.

Types of nozzles

When installing a headlight washer, special attention should be paid to the type of nozzles. Two types are distinguished here - telescopic and stationary devices. Each of the options has its own characteristics.

Stationary

These are nozzles that are built into the bumper of the car. The disadvantage of this type of product is the impossibility of masking, which often spoils the exterior of the vehicle. That is why the installation of a headlight washer should be carried out with an eye on the design of the car. With this approach, you can not worry about the negative impact of the additional option on the appearance of the car.

Telescopic

These are nozzles, which, unlike the previous type of washer, are hidden from prying eyes. This is achieved through the use of a special cover that fits perfectly into the design of the car. Telescopic devices are popular not only for this reason. They feature a well-defined spray angle and spray distance for better surface cleaning. The downside is that there is a high risk of the device freezing to the bumper, which makes it more difficult to use the mechanism correctly.

Headlight washer control types

When installing a headlight washer, it is worth considering one more thing - the types of device control systems. There are two options here.

Forced control

Here, the driver personally turns on and off the device, using a special key on the instrument panel. The advantage of the forced method is the ability to control the frequency and quality of cleaning the surface of the headlights and, as a result, the consumption of the cleaning fluid. The disadvantage is the need to be distracted from the road, which is especially fraught for beginners.

Automatic control

The difference between the system is activation, when the driver holds the glass cleaner handle, for a certain time or after a specific number of wipers actuation. The installation of an automatic type headlight washer is usually provided at the factory.

Jet cleaners, as a rule, are mounted at the factory, in the process of manufacturing a car. But do not despair if the manufacturer has not provided such an option. You can install the washer yourself, using a special kit. All it takes is desire and a little time.

The special kit includes a complete set of parts, ranging from relays and brushes, ending with small devices for attaching "zero" and nozzles. That is why installing a washer with your own hands will not cause difficulties even for beginners.

How to install a headlight washer: step by step

Installation of the headlight cleaning system takes place in several stages:

1. Decide if the fluid will be stored in the same container as the windshield cleaner. In some cases, a separate tank can be provided. The first option is more suitable for domestic cars. All that is required is to drill an additional hole and connect the tube. It is through it that the liquid will be supplied to the headlights. If you decide to install a separate tank, it is better to put it as far as possible from the heating elements of the car.
2. Find a suitable location for the injectors. It is advisable to do this work even before the installation of the headlight washer is completed. The ideal mounting point is opposite the center of the diffuser. The nozzle can be fixed in two ways - by mounting a special lining or by drilling a hole in the bumper. If the drilling option is chosen, it is best to do this from the outside of the bumper to minimize damage to the paintwork.
3. Replace the tank (provided it is separate) and return the pump to its place. Connect the required hoses to the system nodes.
4. Connect the electrical part.

That's all - the installation of the headlight washer is completed. Before checking the system for operability, it is worth checking the connections and making sure they are reliable. Please note that if a mistake is made somewhere, the device may not work. To avoid difficulties in installation, it is worth following the recommendations in the instructions (attached to the kit). Such information should be used by both a novice and an experienced car owner.