Recently, Instagram has started to be frequent with innovations. And any updates on Instagram are usually accompanied by massive glitches and network problems. This is such a familiar process that for some time I did not pay attention to the most main mistake last weeks: "Sorry, there was an error."
Recently, another type of the same error has been common, when Instagram does not write any problems, but you still cannot log into your account.
In this article, I have collected all the known solutions to the problem with logging in to Insta-account on the phone. They drove.
Solutions to the "Oops, an error occurred" problem on Instagram
Option 0.
Use another phone. Most likely this will not help you, but there is a small chance. Most likely this method will help - take the phone on which you have already managed to log into your Insta-account. Very often, the problem is related to the fact that Instagram “doesn’t seem to believe you”. Therefore, the chances from an old phone are higher.
Option 1.
The first thing you should do is try to go to Instagram using Facebook. Obviously, this method is only suitable if you have linked Facebook to Instagram in advance. We cook sledges in the summer, right? The combination of the two networks is extremely useful not only for Facebook itself, which can better target ads to you and earn additional billions of dollars, but also protect your account from hijacking and ... And will allow you to enter your profile if you catch the error "Sorry, there was an error." ...
Again. You received a similar error - try to log in through the profile linked to your Insta-account Facebook. Personally, this option helped me today and I entered one of my profiles.
Option 2.
It's okay, but what if you haven't linked your Instagram and Facebook accounts? And then I can start lecturing you about the importance of security and all that nonsense, remind you of the situation with backups that no one thinks about until the moment they need it. Just what for? We solve problems as they come.
If the problem "Sorry, there was an error", you can go to the web-version in Instagram, but it does not allow us to link Facebook. Therefore, of course, you can flip through the tape, but it will not help us in any way.
It's time to remember about. If you didn't know, then you can use Direct on a laptop (only if you don't have a Mac) for a long time and without dancing with a tambourine. The program looks like this:
In Instagram under Windows 10, you can log in without any problems, even if your account caught a known error. I checked it on three problematic profiles and everyone was able to log in. Yes, the sample is not the most extensive, so if you suddenly have a problem with this, write about it in the comments to the article, if it's not difficult for you.
After we logged into our account using the application for "Windows", we run to read the direct and respond to all customers, and only then go to the settings and look for the item "Friends on Facebook". We connect our Facebook profile, wait a bit, congratulations, the problem is almost solved.
With trembling hands, with happiness and anticipation, we take the phone and click on the cherished Login with Facebook button.
It helps in most cases, but alas, not for everyone. Let's figure it out further.
Alternative option.
Some users do not have the opportunity to use the client for Windows 10, or this method did not work. Readers in the comments shared another way: they download any VPN client for their phone, use it to open Instagram with the choice of a country (in a VPN application) from neighboring developed countries (Germany, and so on). When Instagram launched us, we link Facebook to the profile, the problem is solved.
Important! VPN can only aggravate the problem, catch the confirmation of the profile by SMS without the possibility of login.
Option 3.
The following actions are a bit like the dances of the Indians who tried to make it rain. Sometimes it coincided, which even more convinced the Indians that there was a certain correct ritual and order of actions, thanks to which it was possible to stop droughts. Well, they danced until Columbus made a mistake on the mainland. Something I got carried away.
We return to the web version of Instagram. Anticipating the question, yes, it exists and is located at Instagram.com. We log in, go to the settings and below we notice the line "Temporarily block my account". Feel free to press, do not worry, the profile will not disappear. Zuckerberg won't let his user go so easily :)
Next, we select "problems with the entrance", because of which you want to commit sacrilege and abandon Instagram for a while, agree and block. Then you can finally chat with your family, walk the dog and even drink some foam. You do not touch your account for the next 2-3 hours, no matter how much you want it.
The account is returned from the temporary blocking only with the help of the login in the application. Which will be successful. I do not fully understand the mechanics of this magic, but they work for the vast majority of users who are faced with a problem.
Option 4.
Congratulations, you are the chosen one, since the past methods did not work for you. So, on the authorization screen, we are looking for a subtle inscription "help with the entrance." On the next screen, select the top option, which does not fully fit into the screen.
There we enter the email address to which the account is registered and select "Send email". We check the mail, we find the following envelope:
This is a very important letter! Here carefully. Click on the big blue button and get a question from the system, with which you can open the link: Chrome, Instagram, etc. We select Instagram, if we have not done so before, and click “use this choice always”. Congratulations, you are logged into your profile.
Option 5.
Reset to factory settings of the phone, i.e. full zeroing. I do not believe in performance, but sometimes the stick will shoot. On a couple of forums, there were reports that the chakras opened in people and Instagram let them in after a complete reset of the phone, i.e. clearing ALL information. Think three times.
Option 6.
Uninstall Instagram app and reinstall. This method really helps a small part of users.
Option 7. The last one.
Wait 14 days. 14 days is a magic number and even without any magic. Therefore, if you cannot log into your account now, use another device on which you are already logged into your profile and wait 2 weeks. It always lets go after that.
Bottom line.
Login problems go deeper than a simple system glitch. I hope the great Marketer will save us from the worst scenario, but for now, I recommend that you link your Instagram and Facebook accounts in advance, so as not to experiment with login later.
It is very convenient to always know what specific version this or that assembly of the project is. This is usually done by entering a version number consisting of several digits. I am a proponent of a 4-digit structure like:
Together, this forms the full version naming (Major.Minor.Pathch.Build):
Some people use a unique numeric value as build, which is incremented every time, for example, during a night build. I believe that there is no point in this - it is much more convenient to bind given number to a revision in the repository. I use Subversion and CMake, so I will demonstrate how you can automate the posting of a build version with these tools.
First, you need to add a header file to the project (for example, version.h):
| #include |
Here is a simple interface through which you can get the number from the program full version in text form or as a unique integer identifier.
Now I will give the content of version.cpp:
| #include |
Everything is trivial here and, I think, does not require comments. The last thing left is the mechanism for changing the BUILD value to the revision number in the repository. CMake will handle this just fine, just add the following code to CMakeLists.txt:
| set (VERSION_FILE ../ common / sources / version.cpp) find_package (Subversion REQUIRED) Subversion_WC_INFO ($ (PROJECT_SOURCE_DIR) Repo) file (READ $ (VERSION_FILE) OLD_CODE) foreach (LINE $ (OLD_CODEX)) "string = (+) "BUILD_NUMBER $ (LINE)) if (BUILD_NUMBER) string (REGEX REPLACE" + $ "$ (Repo_WC_REVISION) LINE $ (LINE)) endif () set (NEW_CODE $ (NEW_CODE) $ (LINE)) endforeach ( LINE) file (WRITE $ (VERSION_FILE) " $ (NEW_CODE) ") |
The only subtlety in the script is in the last line, and more specifically, the quotes in "$ (NEW_CODE)", without them all “;” will be removed.
Hi guys, hope things are going well, today we will be explaining a very useful tutorial with you. In today's tutorial, we will create a simple contact form using angularJS and php.
A contact form is a standard web page that is available on every site. This allows site visitors to contact the site owners or service providers who are responsible for maintaining this website. So we are thinking why not create a simple contact form using Angularjs and php to receive messages from websites, readers and / or users.
We are using Angularjs for the foreground and php on the server side. We will be writing a php code that takes data from an Angular form and sends it by email to the site administrator. Create a folder named “contact-form” in your web application directory and create a sample HTML page layout, index.html. Now copy and paste the code below into your index.html file.
Contact form using angularjs and php
Php code for sending email
Create a contact.php page and copy paste the code below. Below is the php code that will fetch data from angular form and email it to the specified email address.
< ?php $post_data = file_get_contents("php://input"); $data = json_decode($post_data); //Just to display the form values echo "Name: " . $data->name; echo "Email:". $ data-> email; echo "Message:". $ data-> message; // sned an email $ to = $ data-> email; $ subject = "Test email site for testing angularjs contact forms "; $ message = $ data-> message; $ headers =" From: ". $ data-> name .." \ r \ n ".." \ r \ n "." X-Mailer: PHP / " . phpversion (); // PHP mail function to send email to email address mail ($ to, $ subject, $ message, $ headers);?>
