Good day to all! Today we will talk about engine oil Kia Sorento. The issue of choosing engine oil is the most important for any car owner. From the correct selection lubricant not only the overall resource of the motor depends, but also such moments as fuel and oil consumption, starting in cold weather, engine noise, power and a large number of factors. Therefore, the choice of oil in the engine must be approached with all seriousness.
Gone are the days when all engines were of the same type and did not require any high-quality lubricants. Everyone poured what they could get, and it was usually an antediluvian mineral water. Now cars have become more technologically advanced, the engines are also installed on them more equipped than before. Therefore, there are much greater requirements for oil. Due to improperly selected oil, not only the engine resource can be reduced, but consumption can also increase. Incorrectly selected oil can burn out badly, which will lead to increased consumption. If the oil is very thick, then the car may not start at all. winter time. And these are just the main reasons. Therefore, let's figure it out together what kind of oil to pour into kia engine Sorento.
Oil in the Kia Sorento engine - what and how much to pour?
In order to understand what kind of oil is needed in the Kia Sorento engine, just refer to the user manual. This is a book that is a manual for the operation of the car. Such a manual is issued in a car dealership to the first owner of a car upon purchase. And most often this manual is transferred from one owner to another. But there are times when this booklet is lost and it becomes problematic to find information about the Kia Sorento engine oil. Then you have to turn to various information sites or selection services technical liquids. To facilitate the task of finding a lubricant, we have posted below information from the original user manual for Kia Sorento (2012-2016):
As a recommendation, the manufacturer suggests using engine oils Shell Helix. Majority dealer centers that's exactly what they do. Our local dealers fill in the Kia Sorento engine Shell oil Helix Ultra 5W40, which is great for both simple 2.4 l and 3.5 l gasoline engines, as well as diesel engines With particulate filter DPF. It makes no sense to write in detail about the Shell Helix Ultra product, since a lot of information is contained in the product card: buy Shell Helix Ultra 5W40. In addition, I can recommend an article: how to distinguish a fake Shell Helix Ultra 5w40 oil. This material is relevant if you plan to buy oil in a regular retail store and not from the dealer.
As we can see from the table, in gasoline engines it is recommended to use oil with a class API quality SM, ILSAC GF-4 and ACEA A5 or higher. In addition, if API oil SM is not available, then you can API SL. The Kia Sorento diesel engine oil must meet the requirements of ACEA C3 if a diesel engine is installed. DPF filter, and ACEA B4 - if there is no particulate filter.
As for the viscosity characteristics of the Kia Sorento engine oil, the choice here is quite wide.
For Russia, a 2.4 liter gasoline engine implies the use of lubricants with a viscosity of 5w30 (5w40), 10W30, 10W40 and 20w50. For European countries in the same Kia Sorento engine, it is better to fill everything with oil with a viscosity of 5w30, 0w40 or 5w40.
Oil for diesel kia Sorento must match the viscosity 0W30, 0W40, 5W30, 10W30 or 15W40. The selection should be carried out in accordance with the climatic regime, as well as the presence or absence of a DPF particulate filter.
What kind of oil to pour into a Kia Sorento engine?
If it's about gasoline engine, you can use the options below
This is Korean synthetics from Mobis, which in turn is official supplier components and assemblies for the conveyors of the Hyundai & KIA concern. Hyundai Turbo Sin oil is poured into a number of Kia and Hyundai models. That's why this product can also be considered original oil Kia Sorento engine. Read more about the product at the link.
It's diesel engine oil, which has the ACEA C3 standard, which means it can be used in cars with a particulate filter. Therefore, we can safely recommend this oil for Kia Sorento engine. Characterized low content sulfur and sulfate ash. Viscosity characteristics allow the use of the product even in the coldest regions, providing a good start in winter and a quick supply of lubricant to rubbing parts.
Well, that's actually all about the oils in the Kia Sorento engine. I just want to add that it is better to change the oil in the Sorento engine not after 15,000 km, as is customary in official dealers, and after 8-10 thousand. This is the most favorable treatment which will provide best mode work and increase the life of the motor. Also, do not forget that we have other interesting material that you can find on the links below.
Good day to all! Today we will talk about Kia Sorento engine oil. The issue of choosing engine oil is the most important for any car owner. Not only the overall life of the engine depends on the correct selection of lubricant, but also such moments as fuel and oil consumption, starting in cold weather, engine noise, power and a large number of factors. Therefore, the choice of oil in the engine must be approached with all seriousness.
Gone are the days when all engines were of the same type and did not require any high-quality lubricants. Everyone poured what they could get, and it was usually an antediluvian mineral water. Now cars have become more technologically advanced, the engines are also installed on them more equipped than before. Therefore, there are much greater requirements for oil. Due to improperly selected oil, not only the engine resource can be reduced, but consumption can also increase. Incorrectly selected oil can burn out badly, which will lead to increased consumption. If the oil is very thick, then the car may not start at all in the winter. And these are just the main reasons. Therefore, let's figure it out together what kind of oil to pour into the Kia Sorento engine.
Oil in the Kia Sorento engine - what and how much to pour?
In order to understand what kind of oil is needed in the Kia Sorento engine, just refer to the user manual. This is a book that is a manual for the operation of the car. Such a manual is issued in a car dealership to the first owner of a car upon purchase. And most often this manual is transferred from one owner to another. But there are times when this booklet is lost and it becomes problematic to find information about the Kia Sorento engine oil. Then you have to turn to various information sites or services for the selection of technical fluids. To facilitate the task of finding a lubricant, we have posted below information from the original user manual for Kia Sorento (2012-2016):
As a recommendation, the manufacturer suggests using Shell Helix engine oils. Most dealerships do just that. Our local dealers fill the Kia Sorento engine with Shell Helix Ultra 5W40 engine oil, which is excellent for both simple 2.4l and 3.5l gasoline engines, as well as diesel engines with a DPF diesel particulate filter. It makes no sense to write in detail about the Shell Helix Ultra product, since a lot of information is contained in the product card: buy Shell Helix Ultra 5W40. In addition, I can recommend an article: how to distinguish a fake Shell Helix Ultra 5w40 oil. This material is relevant if you plan to buy oil in a regular retail store, and not from a dealer.
As we can see from the table, it is recommended to use oil with quality class API SM, ILSAC GF-4 and ACEA A5 or higher in gasoline engines. In addition, if API SM oil is not available, then API SL can be used. In Kia Sorento diesel engine oil, the engine oil must meet the requirements of ACEA C3 if a DPF particulate filter is installed, and ACEA B4 if there is no particulate filter.
As for the viscosity characteristics of the Kia Sorento engine oil, the choice here is quite wide.
For Russia, a 2.4 liter gasoline engine implies the use of lubricants with a viscosity of 5w30 (5w40), 10W30, 10W40 and 20w50. For European countries, it is better to fill in oil with a viscosity of 5w30, 0w40 or 5w40 in the same Kia Sorento engine.
Kia Sorento diesel oil must match the viscosity of 0W30, 0W40, 5W30, 10W30 or 15W40. The selection should be carried out in accordance with the climatic regime, as well as the presence or absence of a DPF particulate filter.
What kind of oil to pour into a Kia Sorento engine?
If we are talking about a gasoline engine, then you can use the options below
This is Korean synthetics from Mobis, which in turn is the official supplier of components and assemblies to conveyors of the Hyundai & KIA concern. Hyundai Turbo Sin oil is poured into a number of Kia and Hyundai models. Therefore, this product can also be considered the original Kia Sorento engine oil. Read more about the product at the link.
This is a diesel engine oil that meets the ACEA C3 standard, which means it can be used in cars with a diesel particulate filter. Therefore, we can safely recommend this oil for the Kia Sorento engine. It is characterized by a low content of sulfur and sulphated ash. Viscosity characteristics allow the use of the product even in the coldest regions, providing a good start in winter and a quick supply of lubricant to rubbing parts.
Well, that's actually all about the oils in the Kia Sorento engine. I would just like to add that it is better to change the oil in the Sorento engine not after 15,000 km, as is customary with official dealers, but after 8-10 thousand. This is the most favorable mode, which will provide the best mode of operation and increase the life of the motor. Also, do not forget that we have other interesting material that you can find on the links below.
Premature engine wear can be caused by improperly selected lubricant for a particular car model. Extend operational period engine, reduce fuel consumption and ensure optimal operation power unit allows the use of motor fluid recommended by the vehicle manufacturer. This article contains the parameters of the recommended engine oil for Kia Sorento.
With a scheduled change motor lubricant can be poured original car oil, or choose a lubricant similar in parameters. To select a lubricant, you need to take into account the recommendations of the manufacturer of the machine, set out in the operating instructions for the vehicle.
- viscosity;
- type, class of oil;
- base base (synthetics, semi-synthetics, mineral);
- tolerances.
In harsh winter conditions, it is worth using a car oil designed for the winter. When the summer is too hot, pour liquids designed for the summer. If the temperature range is close to the conditions of a mild climate, then for the Kia Sorento it is allowed to pour all-season motor oils.
Kia Sorento BL 2003-2013 release
- Motors running on gasoline:
- according to API classifications- SJ, SL or higher;
- in accordance with ILSAC - GF-3 or higher.
- Diesel engines with W.G.T ( bypass valve turbocharger):
- according to API classification - CF-4 or higher;
- according to ACEA - B4 standards.
- Diesel engines equipped with V.G.T (variable geometry turbocharger):
- according to API classification - CH-4 or higher;
- By ACEA standard- B4.
By viscosity characteristics engine oil for Kia Sorento is recommended to be selected according to table 1, depending on the temperature range outside the car.
Table 1. Dependence of the viscosity of the motor fluid on the temperature range
Based on the data in Table 1, it follows, for example, for diesel units at temperatures from 0 0 C to +40 0 C, pour SAE 30. And in conditions from -30 0 C (or less) to +10 0 C, you should use 0W-30. The remaining motor oils are selected by viscosity in a similar way.
*1 - save on consumption fuel mixture allows the use of motor oils corresponding to the parameters:
- By API system- SJ or SL;
*2 - the liquid is only suitable for cold conditions and does not withstand constant high loads as well as high speed operation.
Kia Sorento Prime UM 2015-2017 release
In accordance with the manual, you need to pour motor oils that meet the parameters:
- Petrol Theta motors II 2.4 MPI and Lambda II 3.3:
- in accordance with API specification- SM or higher;
- according to ILSAC standards - GF-4 or higher;
- By ACEA classifications- A5 or more.
In the absence of the specified lubricant, it is allowed to fill in oil with the following characteristics:
- according to API - SL;
- according to ILSAC standards - GF-3;
- in accordance with ACEA - A3.
- Theta II 2.4 GDI and Theta II 2.0 T-GDI petrol engines:
- in accordance with ACEA - A or more.
If the specified engine oil is not available, the following can be used:
- according to API classification - SL;
- in accordance with ILSAC - GF-3;
- according to ACEA - A3.
- Diesel power units R2.0 / R2.2 with particulate filter:
- in accordance with ACEA - C3 or C2.
- Units running on diesel fuel R2.0 / R2.2 without a particulate filter:
- according to the ACEA - B4 standard.
- Gasoline engines:
- HELIX ULTRA AH-E 5W-30;
- HELIX ULTRA 5W-40.
- Diesel engines:
- HELIX ULTRA AP 5W-30;
- HELIX ULTRA AP-L 5W-30.
The selection of the required viscosity of the motor oil is carried out using the data in tables 2 or 3.
Table 2. The dependence of the viscosity of the motor fluid on the temperature range. 
Table 3 Temperature ranges, as well as recommended SAE viscosities. *1 - saving the fuel mixture is facilitated by car oil that meets the standards:
- according to SAE classification- 5W-20;
- according to the API specification - SM;
- according to ILSAC - GF-4;
- according to the ACEA standard - A5.
*2 - savings in fuel consumption can be achieved by filling liquid with the following characteristics:
- according to SAE 5W-30;
- according to the ACEA standard - A5.
Based on the data in Table 3, for example, for gasoline engine 3.3 MPI (except for the countries of the Middle East, India, Libya, Algeria, Morocco, Tunisia, Sudan, Egypt, Iran) you need to buy SAE 5W-30 or 5W-20 motor oils at a temperature range of -30 0 C (or less) up to +50 0 C (and more). The remaining viscosities, depending on the season overboard, are chosen in a similar way.
Kia Sorento XM 2009-2012 release
According to manual kia Sorento must be filled with lubricants that meet the requirements:
- 2.4L and 3.5L petrol engines:
- according to the API specification - SM;
- according to ILSAC - GF-4 or higher;
- according to the ACEA standard - C3.
- according to the ACEA - B4 standard.
The viscosity of the motor fluid must be selected according to table 4 in accordance with the temperature range in which the machine will be operated.
Table 4. The dependence of the viscosity of the motor fluid on the temperature range. *1 - lubricants with the following parameters contribute to a decrease in fuel consumption:
- according to SAE 5W-20 or 5W-30;
- according to the API system - SM or SL;
- in accordance with ILSAC - GF-3.
According to Table 4, for example, for diesel power units at temperatures from -30 0 C (or less) to +30 0 C, it is necessary to fill in oils 0W-30 or 0W-40. And in the temperature range from -30 0 C to +50 0 C (or more), it is better to pour lubricant marked 15W-40.
Kia Sorento XM FL 2013-2017 model years
Based on the instructions for the car, you must use motor fluids that meet the specifications:
- Gasoline engines Theta II 2.4L (Except Europe, for Russia) and Theta II 2.4L (for Europe), as well as Lambda II 3.5L:
- in accordance with the specification API - SM, in the absence of the specified liquid, it is allowed to fill in class SL;
- according to ILSAC standards - GF-4 or higher;
- according to ACEA classification - A5 or higher.
- Diesel engines equipped with a particulate filter:
- according to the ACEA standard - C3.
- Diesel engines without particulate filter:
- according to the ACEA - B4 standard.
The viscosity of the oil can be selected according to table 5.
Table 5. Temperature ranges and recommended SAE viscosities. *1 - motor oils with the following parameters contribute to reducing the consumption of the fuel mixture:
- according to SAE 5W-20;
- according to the API system - SM;
- in accordance with ILSAC - GF-4.
According to table 5, for example, for a 3.5L gasoline engine, in temperature conditions from -30 0 C (or less) to +50 0 C (or more), SAE 5W-20 and SAE 5W-30 are suitable. In the same temperature range, the Theta II gasoline engine (For Europe) will need fluids with SAE marking 5W-30, 5W-40, 0W-40. Rest kinematic viscosities motor oils are selected in a similar way.
Conclusion
The normal operation of the power unit is ensured by engine oil with optimal parameters suitable for design features car engine. The use of the recommended engine oil for Kia Sorento has a positive effect on the engine resource, provides its optimal protection against overheating and easy start-up at low temperatures.
In the manual for the car, the manufacturer indicates the possibility of using energy saving oil for gasoline engines. The use of such a lubricant reduces the resistance inside the engine and reduces the consumption of the fuel mixture.
