How much oil is in a suzuki grand vitara engine. Technical fluids for Suzuki Grand Vitara New How much oil is in the Grand Vitara 2.4 engine

The table shows approximate values filling tanks which may differ slightly from the real ones. To avoid errors when refueling vehicle units and systems, strictly follow the instructions set out in the section

"Maintenance and operations performed by yourself."

Unit, system		Refueling capacity (approximate), l.
Fuel tank
Engine lubrication system (oil change): Including oil filter Oil filter not included			Engine HR16DE or MR20DE: Engine nissan oil1 API SL or SM 1 ILSAC quality class: GF-3 or GF-4 1 Quality class according to ACEA A1/B1, AZ/VZ, AZ/B4, A5/B5, C2 or NW 1 Engine K9K: NISSAN engine oil 1 ACEA quality class A1/B1 1 M9R engine: NISSAN engine oil *1 Quality class according to ACEA СЗ-2004
Cooling system (taking into account the capacity of the expansion tank): Models with manual gearbox Models with CVT Models with manual gearbox Models with automatic transmission bottle capacity			Proprietary cooling fluid NISSAN(L250) *2
main gear			Branded oil NISSAN Hypoid Super GL5 80W90 or transmission oil API oil gl5, SAE viscosity 80W90
Transfer case
Oil for manual transmission			Genuine NISSAN Tonesmission Oil or API GL4 Oil, SAE 75W80 Viscosity
	MR20DE (2WD) or K9K
	MR20DE(4WD) or M9R(2WD or 4WD)		Branded transmission oil NISSAN or API GL4 oil, SAE 75W85 viscosity
Automatic Transmission Fluid (ATF)			NISSAN Matic J ATF 3 5
Continuously Variable Transmission Fluid (CVT)			NISSAN CVT Fluid NS-2 45
Brake fluid and hydraulic clutch fluid		Top up to the correct level, see Owner Maintenance and Operations.	Genuine NISSAN brake fluid or equivalent brake fluid. DOT 4 (US FMVSS No. 116)
Universal grease			Grease NLGI No. 2 (with lithium thickener)
Refrigerant for air conditioning system			Refrigerant HFC-134а (R-134а)
Air Conditioning Oil			Genuine NISSAN A/C type R A/C oil or fully equivalent oil

*1: For additional information see “Recommendations for Selecting Engine Oil Viscosity” below.

*2: Use only genuine NISSAN coolant (L250). The use of non-proprietary coolant can lead to corrosion of aluminum parts of the engine cooling system.

*3: Use only genuine NISSAN Matic J ATF. Usage working fluid oi NISSAN Matic J ATF will reduce the life of the automatic transmission and may cause transmission failures.

*4: Use only genuine NISSAN CVT Fluid NS-2. Using a fluid other than NISSAN CVT Fluid (NS-2) will damage the continuously variable CVT transmission.

*5: If maintenance is required, contact a service station official dealer Nissan.

Most car owners still try to save money and change the engine oil in the garage. Indeed, this operation is so easy that why spend money on it if you can spend half an hour and do it all yourself. The most important thing in the process of changing the oil is to know what and where to unscrew, as well as how much and what kind of oil to pour? Therefore, we will further analyze in detail the entire process of changing the oil on a Suzuki car. Grand Vitara.

Instructions for changing the oil and filter on the Grand Vitara

1. The first thing to do is to directly put the car in the pit and prepare the engine for an oil change, namely, warm it up a little. Since the oil change must be carried out on a warm engine.

3. The next step is to make sure which engine protection is installed on the car. If there are no holes on the engine protection for changing the oil filter and draining the oil, then it must be dismantled accordingly.

4. After all the above operations, the oil can be drained accordingly. To do this, prepare a container for draining used oil. You can use a 5 liter bottle and a canister and anything, the main thing is that the capacity should be at least 5 liters. and an area as large as possible so that the drained oil does not fall on the ground or floor. Next, after the stand of the oil collecting container, unscrew drain plug(bolt) indicated in Figure No. 1 and wait for a complete drain, the amount of oil drained from the engine.

Figure #1

5. At the time when the oil is drained, it must be replaced oil filter. The filter is located to the left of the drain plug at the top. Indicated in Figure No. 2. To unscrew the filter, you must use a special wrench (filter puller). AT last resort in the absence of a key, you can pierce the filter with a metal pin and unscrew it. It is important to know that the filter must be unscrewed counterclockwise.

Figure #2

6. Next, fill the new oil filter with oil and lubricate the rubber seal with oil as well. It is important to remember that in no case should the filter be filled to the brim, otherwise, when installing the filter in place, there is a high probability of oil spilling.

7. The next step is to install new filter in place. To do this, we wrap the filter until the rubber gasket touches the mounting surface, and then tighten it another ¾ turn to tighten it.

8. After installing the new filter, we screw the drain plug of the engine pan into place and wipe it with a rag to make it easier to identify oil leaks after starting the engine.

9. The next step, respectively, is to fill required amount oil through the oil filler neck. The amount of oil to be filled with filter replacement is indicated in the manual for maintenance and equal - for a 2.0 liter engine. - 4.7 liters, and for a 2.4-liter engine. - 4.8 l. But it is important to remember that these volumes are indicated without pouring oil into the oil filter before installation.

10. After filling in the oil and tightening the oil filler cap, it is necessary to start the engine and let it run for at least 5 minutes. Then stop, let the oil drain into the sump and check the connections of the oil filter and oil drain plug for leaks and the oil level. And top up if necessary.

This completes the process of changing the oil and oil filter on the Grand Vitara. As you can see, there is no difficulty in this operation, except that there may be a problem with dismantling the oil filter.

What kind of oil to pour into the Suzuki Grand Vitara engine

Almost every owner of a Grand Vitara car, if it is necessary to change the oil, will have a question about what kind of oil to fill in the engine. But there is general recommendations specified in the Operation and Maintenance Manual and specifying that the oil to be filled into the engine must be:

— API classification: SG, SH, SJ. SL or SM;
— viscosity characteristics: for 1.6 l engines. and 2.4 l. - SAE 0W-20, 5W-30, 10W-30, 10W-40, for 2.0 l engines. and 3.2 l. - SAE 5W-30, 10W-30, 10W-40, 15W-40.

Accordingly, it is up to the car owner to decide which company and brand of oil to pour. But it must meet these parameters and have an approval (on the label at the bottom) that it can be used on these cars.

How to change the oil filter and engine oil on a Suzuki Grand Vitara was last modified: April 28th, 2018 by Administrator

All-wheel drive crossover Grand Vitara from Suzuki was launched in mass production in 1998. Despite belonging to the class of SUVs, the model had a frame structure and a complete set off-road qualities, thanks to which it easily outperformed its competitors. Vitara instantly gained popularity on Russian market, becoming one of the best-selling SUVs here. The first generation of the car was produced until 2005 and at that time was equipped with 2.0d diesel engines (87-109 hp), petrol units 1.6, 2.0 (94-140 hp) and a 2.5-liter V-shaped "six" (142-158 hp). They worked on mechanics or a 4-band automatic. In 2001, the manufacturer introduced a reinforced modification of the Grand Vitara XL-7, whose engine compartment occupied a 2.7-liter engine for 173-185 horses. Details about engine maintenance (how much oil to pour) are later in the article.

The debut of Vitar II took place in 2005. The SUV received a ladder frame integrated into the body and an updated motor range displacement of 1.6, 2.0 and 2.4 liters. The first restyling of the generation took place 3 years later and was marked by the appearance of trim levels with new engines of 2.4 (169 hp) and 3.2 (232 hp) liters. Concerning appearance, then the novelty is distinguished from its predecessor by the front fenders and a modified front bumper. In addition, the installation of reinforced motors led to an improvement in the soundproofing of the cabin. In 2011, the export Vitara again received an update, as a result of which the tailgate was removed spare wheel(the length of the car was reduced by 20 cm), and diesel engine 1.9 liters "fitted" to European environmental standards.

Dynamics and excellent cross-country ability Suzuki Grand Vitara went well with reasonable prices and therefore reliable japanese car been in high demand for a long time. Model left domestic market in 2016.

Generation 1 (1997-2005)

J20A 2.0 engine

Which motor oil filled from the factory (original): Synthetics 5W30
Oil types (by viscosity): 5W-30, 5W-40, 10W-40
How many liters of oil in the engine (total volume): 5.2 liters.
Oil consumption per 1000 km: up to 500 ml.
When to change oil: 10000-15000

When changing the engine oil, do not forget to replace the sealing washer of the drain plug!

Copper washer for drain plug: 09168-14015

Gear oils:

AT mechanical box gears (manual transmission) - SAE 75W-90 according to API GL-4 1.9 liters

In the distribution box:

in service books before 2008 recommended SAE 75W-90 according to API GL-4 1.6 liters
after 2008, SAE 80W-90 according to API GL-5 1.6 liters is recommended, while SAE 75W-90 is acceptable.

In the gearbox (bridges) - hypoid SAE 80W-90 according to API GL-5. 1 l. front, 0.8 l. rear

AT automatic box gears (automatic transmission) - Oil specification JWS 3309 ( Suzuki ATF 3317 (1 liter 99000-22B00), or Mobil ATF 3309, or Toyota Type T-4). At partial replacement drains 3 liters. For complete replacement it is recommended to use at least 11-12 liters on the device.

ATTENTION! If an emulsion has drained from the front gearbox instead of oil, we recommend that you lengthen the front axle breather.