BMW TwinPower Turbo Longlife-01 FE SAE 0W-30 engine oil.
Fully synthetic motor oil based on GTL gas-to-liquid conversion technology. Original BMW Longlife-01 FE 0W-30 engine oil has been specially developed, produced and tested to achieve its full potential. BMW engines, providing them with higher performance characteristics and protection. Compared to standard products BMW Longlife-01 FE 0W-30 engine oil provides improved fuel economy, which allows BMW engines to fully realize the possibilities of EfficientDynamics technologies.
Advantages:
– Proven fuel economy for petrol engines under the New European NEDC Driving Cycle is at least 1.0% better than BMW Longlife-01 products.
– Stability of performance in wide range operating temperatures and engine loads, even in extreme conditions operation.
- Lighter cold start at negative temperatures.
– Patented active cleaning technology protects against deposits and corrosion, thus extending engine life.
– High level wear protection.
Applicability:
– For petrol engines since 2002 of release. Currently these are: N1x, N2x, N4x, N54, N55, N63, N74 and others.
BMW approval: Longlife-01FE
Viscosity class according to SAE: SAE 0W-30
Quality class according to ACEA: A5/B5
API quality class: SN
BMW M TwinPower Turbo SAE 10W-60 engine oil.
BMW M engine oil TwinPower Turbo SAE 10W-60 is specially formulated for BMW M engines.
GTL's innovative base oil technology provides engine protection that exceeds industry standards. This engine oil keeps BMW M engines optimally clean and allows them to reach their full potential.
The engine oil has been extensively tested and approved for use in BMW M engines.
This engine oil is approved concern BMW for use as an all-season.
Advantages:
– Provides exceptional dynamic qualities of BMW M engines.
Applicability:
Use strictly in accordance with the instruction manual for your car!
Fits M5/M6/Z8 up to and including 2010. For M3 - until 2013 inclusive.
BMW approval: BMW M
Viscosity class according to SAE: SAE 10W-60
Quality class according to ACEA: A3/B4
BMW M TwinPower Turbo Longlife-01 SAE 0W-40 engine oil.
BMW M TwinPower Turbo Longlife-01 SAE 0W-40 engine oil has been specially developed for BMW engines and the new generation of BMW M engines. GTL's innovative base oil technology provides engine protection that exceeds industry standards. This engine oil keeps BMW and BMW M engines optimally clean and allows them to reach their full potential. The engine oil has been extensively tested and approved for use in BMW engines as well as in the new generation of BMW M engines. This engine oil is approved by BMW for use as an all-weather oil.
Advantages:
– Provides exceptional dynamic qualities of BMW and BMW M engines.
– Confident engine start at low temperatures.
– Excellent wear protection.
– Patented active cleaning technology protects against deposits and corrosion, thus extending engine life.
Applicability:
Use strictly in accordance with the instruction manual for your car!
– For BMW petrol engines and diesel engines without particulate filter.
&ndash For everyone BMW cars M except:
– M5/M6 with release date up to 2011
– M3 with release date before 2014
BMW approval: Longlife-01
Viscosity class according to SAE: SAE 0W-40
Quality class according to ACEA: A3/B4
BMW TwinPower Turbo Longlife-01 SAE 5W-30 engine oil.
BMW TwinPower Turbo Longlife-01 SAE 5W-30 engine oil is based on GTL technology. This provides engine protection that exceeds industry standards. This engine oil keeps BMW engines optimally clean and allows them to reach their full potential.
Advantages:
– Confident engine start at low temperatures.
– Excellent wear protection.
– Patented active cleaning technology protects against deposits and corrosion, thus extending engine life.
Applicability:
Use strictly in accordance with the instruction manual for your car!
– For all BMW petrol engines.
BMW approval: Longlife-01
Viscosity class according to SAE: SAE 5W-30
Quality class according to ACEA: A3/B4
BMW TwinPower Turbo Longlife-04 SAE 0W-30 engine oil.
BMW TwinPower Turbo Longlife-04 SAE 0W-30 engine oil is based on GTL technology. This provides engine protection that exceeds industry standards. This engine oil keeps BMW engines optimally clean and allows them to reach their full potential.
Compared to conventional motor oils, it is characterized by improved viscosity-temperature characteristics, providing high fuel efficiency.
The new genuine BMW engine oil makes it possible to use the full potential of BMW engines.
This engine oil has been extensively tested and approved by BMW as an all-weather oil.
Advantages:
– Consistent performance over a wide range of operating temperatures and engine loads.
– Confident engine start at low temperatures.
– Excellent wear protection.
– Patented active cleaning technology protects against deposits and corrosion, thus extending engine life.
Applicability:
Use strictly in accordance with the instruction manual for your car!
BMW approval: Longlife-04
Viscosity class according to SAE: SAE 0W-30
Quality class according to ACEA: C3
BMW TwinPower Turbo Longlife-04 SAE 5W-30 engine oil.
BMW TwinPower Turbo Longlife-04 SAE 5W-30 engine oil is based on GTL technology. This provides engine protection that exceeds industry standards. This engine oil keeps BMW engines optimally clean and allows them to reach their full potential.
Compared to conventional motor oils, it is characterized by improved viscosity-temperature characteristics, providing high fuel efficiency.
The new genuine BMW engine oil makes it possible to use the full potential of BMW engines.
This engine oil has been extensively tested and approved by BMW as an all-weather oil.
Advantages:
– Consistent performance over a wide range of operating temperatures and engine loads.
– Confident engine start at low temperatures.
– Excellent wear protection.
– Patented active cleaning technology protects against deposits and corrosion, thus extending engine life.
Applicability:
Use strictly in accordance with the instruction manual for your car!
– For all BMW diesel engines with and without particulate filter.
– Application in gasoline engines bmw
valid only in the EU region, including Norway, Switzerland and Liechtenstein.
BMW approval: Longlife-04
Viscosity class according to SAE: SAE 5W-30
Quality class according to ACEA: C3
BMW TwinPower Turbo Longlife-12 FE SAE 0W-30 engine oil.
BMW TwinPower Turbo Longlife-12 FE SAE 0W-30 engine oil contributes to fuel economy, maintains optimal cleanliness, provides a high degree of protection for BMW engines and allows them to be used to their full potential.
The Low-SAPS formula protects the diesel particulate filter from contamination.
This engine oil has been developed specifically for BMW engines and differs from conventional engine oils in that it allows engines to fully realize the potential of EfficientDynamics technologies.
The engine oil has been extensively tested for performance and approved by BMW as an energy-saving and all-weather oil.
Advantages:
– Proven fuel economy diesel engines according to the parameters of the new European driving cycle NEDC is a minimum of 1.5%.
– Consistent performance over a wide range of operating temperatures and engine loads.
– Confident engine start at low temperatures.
– Excellent wear protection.
– Patented active cleaning technology protects against deposits and corrosion, thus extending engine life.
– Low oil consumption.
– New additive package composition with reduced content of ash-forming substances.
Applicability:
Use strictly in accordance with the instruction manual for your car!
– This oil may only be used for certain models new generation BMW diesel and petrol engines. Please contact your BMW dealer for information on applicability.
– Use in BMW petrol engines is only permitted in the EU region, including Norway, Switzerland and Liechtenstein.
BMW approval: Longlife-12FE
Viscosity class according to SAE: SAE 0W-30
Quality class according to ACEA: C2
ENGINE OIL BMW TWINPOWER TURBO.
Motor oil is one of the most important operating materials modern high-powered BMW engines. BMW engines traditionally place very stringent demands on its properties. In order to be approved for use, engine oil must not only have excellent lubricity, but also have special properties and perform a number of necessary functions:
energy saving
The oil must allow the engine to operate using Efficient Dynamics technology: help reduce internal losses, increase fuel efficiency and provide exceptional dynamic qualities. New specifications for BMW LL12FE and BMW LL14FE+ engine oils allow new and promising models BMW engines achieve unsurpassed fuel and economic performance.
detergents
When working in the engine, inevitably formed various pollution. The oil should wash them away and take them to the oil filter, preventing the formation of deposits.
Anti-corrosion
The oil must protect against corrosion and not be aggressive to friction surfaces and engine parts.
Starting and viscosity-temperature
The oil must perform equally well in cold engine starts at extremely low temperatures and in operating conditions at high temperatures as well as at higher speeds.
Cooling and sealing
Any BMW engine is the brainchild of high innovative technologies. During operation, some friction surfaces are heated to very high temperatures and the oil must continuously remove the heat generated. Also, the oil has the function of sealing the combustion chamber, allowing you to achieve excellent power and fuel-economic characteristics of the engine.
Durability
Oil is one of the main operating materials to ensure the operation of the engine, therefore, oxidation resistance, low speed aging and low consumption waste oils are one of its key qualities.
The whole range of these characteristics was taken into account by BMW engineers when developing new original engine oils. Created by them latest line oils has absorbed all the most advanced achievements in the field of engine oil production technologies. The entire line covers the needs and takes into account the peculiarities of the operation of BMW vehicles in many parts of the world. This also applies to countries with a harsh climate and unstable fuel quality, where there is a high risk of failure of expensive elements of the exhaust gas toxicity reduction system. The production of genuine BMW engine oils is based on the GTL* technology complex, which makes it possible to obtain crystal-clear base oils from natural gas.
Therefore, by using genuine BMW TwinPower Turbo engine oil, you can be complete confidence that your car's engine is protected high technology even under the most severe conditions and operating conditions.
1. Timely visit your official BMW dealer for the next replacement of the original motor BMW oils TwinPower Turbo at the manufacturer's prescribed mileage interval, or as directed on-board computer your car;
2. Check the engine oil level at least once every two weeks using your BMW's dipstick. Electronic system automatic control of the level and quality of the oil will inform you in a timely manner about the need to top up or replace the oil.
3. Buy genuine BMW TwinPower Turbo engine oil only from official dealer centers bmw. Only in this way you can protect yourself and your car from counterfeit products and get the highest quality goods.
- Detergent and dispersant properties give engine oils the ability to wash away and retain in their volume the contaminants formed in the engine. Due to this, the contaminants washed off by the oil are retained by the oil filter, preventing the formation of deposits.
- One of the most important properties motor oil is its viscosity. It not only determines the lubricating properties of the oil, but also affects the energy loss during engine operation. Optimally selected oil can not only provide maximum engine protection against wear, but also reduce fuel consumption.
- An indicator characterizing the degree of change in the viscosity of engine oil depending on temperature is the viscosity index. All original oils BMW TwinPower Turbo have high index viscosity, which allows them to maintain excellent lubricating properties at high temperatures and in difficult conditions operation of engines, as well as ensure ease of starting even at very low temperatures.
- During the production process, a package of additives is introduced into the base oil manufactured using GTL* technology, which further determines its anti-wear, viscosity-temperature, antioxidant, anti-corrosion and detergent-dispersant qualities.
- Engine oil performs very important function- is a sealant of the combustion chamber of the engine. Possessing a certain set of properties and qualities, the oil during operation seals the volume of the combustion chamber and ensures that the engine realizes its power, dynamic and fuel-economic indicators.
- To match high standards BMW quality, new original engine oils BMW TwinPower Turbo and original oil filters BMWs undergo a series of complex laboratory tests and are also subject to constant quality control.
Benefits in innovation
- The use of original BMW TwinPower Turbo engine oils allows you to achieve maximum protection engine from wear various modes and operating conditions.
- Optimally matched viscosity-temperature characteristics provide ease of starting the engine at low temperatures.
ECONOMY AND ENVIRONMENTAL FRIENDLY
- Helps to reduce fuel consumption and, consequently, reduce CO2 emissions into the atmosphere.
- Compatible with components of exhaust gas aftertreatment systems and does not negative impact on them.
VALUE PRESERVATION
- Accurate compliance with specifications guarantees reliable performance engine for a long period.
- Extended oil life and stability allows extended oil change intervals.
From
Price 40t. R.
Selling as a set only.
BMW 37 style R18 Original, 8J x 18, 5x120.
One is wide.
Native color.
One disc is boiled (I don’t know when it was cooked, the discs were on the car when I bought it, I had no problems with this disc).
Rubber is given with disks.
Were on E32.
Balanced.
From
Selling peppy engine BMW #E39 #M54B25 double vanos 192 hp 2001
Excellent restored condition. 2 rounds completed. Mileage after restoration 18 thousand.
While standing on the car, you can see, listen, feel.
Compression in all pots from 11.8 to 12.3
Oil for 7-8 thousand from replacement to replacement did not eat a single gram !!!
The engine is nothing to be ashamed of. Condition - threw and went.
I can give both with a hinged 75 rubles, and without it 60 rubles.
Whatsapp or viber 89892641000
Pick up at Kolosisty st. Makarenko 11/1B from 8 am to 6 pm
From
It happens, this happens too ... It's sad, sad, but we have to part with our beloved and dear soul machine ...
#Bavarochka goes to #analysis...
1. Engine BMW #E39 #M54B25 double vanos 192 hp 2001 Excellent restored condition. While standing on the car, you can see, listen, feel. Oil for 7-8 thousand from replacement to replacement did not eat a single gram !!! The engine is nothing to be ashamed of. I can give both with a hinged 75 rubles, and without it 60 rubles.
2. Block ABS 001 BOSCH Excellent working condition. No mistakes. 11 p.
3. Automatic transmission ZF 5HP19 + Restored donut (gave 11,500 rubles) + brain + backstage. All new internals (frictions, discs, springs, gaskets, oil, etc.). Works without kicks, without shocks. Like clockwork, as it should be! Practically new box in old packaging. 50 r.
4. I took a roof with complete set glass hatch. 10 tr. Haven't been able to put...
5. Wheels 32 style. R18 Width 8 J offset ET 20 CH 74.1 No repairs, no curbs, no welding, no seams. Price 26 tr. Haven't been able to put...
6. Wheels 50th style. R16 There are 5 discs. 4 pieces are in good condition, the 5th is under repair. The price for everything is 10 rubles.
7. Trunk hydraulic kit. Everything will work perfectly ... And it will close and open with the key button. The price of the set is 8 rubles. Oil as a gift) Did not have time to sell ((
8. New Fuel filter KOLBENSCHMIDT 50013645 2200 rub. Haven't been able to put...
9. Mirrors in excellent condition. Heating. Folding. for 12 wires. Set 6.5 r. I can complete with an ESP unit with an electric folding mirrors button. The buttons are not stuck.
10. Sensor RLS Rain / light Price ruble.
11. Roof rails. Sedan. Color 354. Whole. There are 2 couples. Price ruble set.
12. New round hodovka. Changed 2-3 months ago.
13. New brakes. Changed around the same 2-3 months ago.
Who needs to ask.
In terms of parts and assemblies - he did not spare money, effort and time for it, many will confirm ... Therefore, a lot is simply ideal, a lot good quality and in good condition... Just ask, I will try to provide as many photos as possible and describe in detail what's what for a specific part, spare parts ... Territorially Krasnodar. Sending any transport.
Viber and WhatsApp 89892641000
Shell and BMW
Shell supplies premium engine oils for automotive maintenance and BMW motorcycles in more than 140 countries of the world
The BMW Group has selected Shell as the only recommended global engine oil supplier for its OE brands, including BMW, BMW i, Mini and BMW Motorrad.
From the beginning of 2015, customers will be able to purchase premium Shell engine oils at over 3,500 BMW Group dealerships in over 140 countries, including Brazil, the UK, Germany, China, Russia, the US, Turkey, South Africa and South Korea.
partnership agreement for Russian market implies that Shell will produce engine oils based on Shell PurePlus technology for genuine BMW engine oil grades that will meet the latest BMW engine oil requirements.
With Shell PurePlus Technology, Shell has made a real breakthrough in the production of motor oils. The result of 40 years of research by the concern is Shell's patented gas-to-liquid conversion (GTL) process, which produces crystal clear base oil from natural gas, the main component of finished oils. The base oil is manufactured at the Qatar GTL Product Manufacturing Plant (Pearl GTL Project) as part of a partnership between Shell and Qatar Petroleum. The plant is the most a major producer GTL products in the world, and the only commercial facility today where base oil is produced using the GTL process.
Since 2015 clients service centers BMWs around the world will be able to take advantage of the partnership between the two companies. For some countries, such as China, Shell and BMW will produce products under a common brand to cement the link between the two brands.
Mark Gainsborough, Executive Vice President, Shell Global Lubricants, comments: “We are thrilled to have been given the opportunity to be the recommended motor oil supplier for BMW and look forward to joint work in the supply, distribution and marketing of these products since the beginning of 2015. This agreement is a testament to the fact that Shell's motor oil expertise and unrivaled technology has been valued by one of the world's leading premium car manufacturers. In addition, our latest and innovative premium motor oil technology, Shell PurePlus, has been recognized.”
Shell also entered into an exclusive technical partnership with BMW Motorsport, under which Shell will also supply premium engine oils to BMW Motorsport. Shell Helix Ultra. The cooperation program between the two companies provides for the use of Shell products in the DTM (Deutsche Tourenwagen Masters) races, the TUDOR United SportsCar Championship (USCC) and the 24-hour races on the Nürburgring-Nordschleife circuit (Germany), as well as races in Austria, Germany, the Netherlands, Russia and the USA.
As part of this partnership, two leading brands in the automotive industry have teamed up to provide their customers with products and technologies. top quality. Both companies are focused on providing premium products and services. BMW Features and Shell in sales and marketing, as well as the strong potential of Shell's global supply chain, will contribute to the success of our collaboration."
Shell today opened new chapter in the history of innovation and presents a unique patented technology Shell PurePlus, on the basis of which Shell scientists have developed new line of fully synthetic motors Shell oils Helix Ultra for the most modern engines. For several decades, only fuel was created on the basis of gas-liquid conversion, since the catalysts and options for the technological design of the process that existed at that time did not allow the production of large hydrocarbon molecules, such as those contained in the base oil. As a result, it was Shell scientists who, after developing and testing several generations of new type of catalysts, managed to create the necessary catalyst, which opened the era of base oil production using gas-liquid conversion technology (GTL). It took Shell 40 years of development to turn a sample created in the laboratory into mass-produced products on an industrial scale. Shell has also invested more than $18 billion to build the world's largest Pearl GTL plant in Qatar to manufacture GTL products.
During 40 years of development in the field of FLC, Shell has registered 3500 unique patents that formed the basis base oil production using GZhK technology on an industrial scale. The technology for producing base oils from natural gas became known as Shell PurePlus, and the name has since become a registered trademark.
40 years of development
3500 unique patents
Over $18 billion investment allowed Shell to produce lubricants using the patented Shell PurePlus technology with unique characteristics:
Exceptionally low volatility at high temperatures reduces oil consumption for topping up;
- exceptional pumpability at low temperatures ensures easy engine start;
- exceptional resistance to oxidation maintains the performance of the oil throughout its entire life cycle.
Based on materials from the global press service of Shell
