How to remove a radio - performing the procedure. Correct ways to remove a radio from a car

How true remove the radio without special keys

Many motorists are faced with the problem of removing the radio in their car. Some people cannot remove the standard device installed at the factory, others inherited music along with their car, and others simply lost special keys. There are also plenty of circumstances for dismantling - from repairing wiring to purchasing the latest stereo system. Hence the demand for information on how and with what help you can carefully remove the car radio without damaging the plastic of the front panel. And although the operation is primitively ordinary and carried out in a relaxed manner using the means at hand, there are pitfalls in it, which

Types of radio mounts

To choose a method for removing a car player, you need to understand how it is fixed inside the panel. There are the following types of fastenings:

on 2 side clamps;
on 4 latches located on the side and top of the case;
screwed to the brackets with screws.

Example of mounting a standard head unit

Note. The last method of fixation is typical for standard devices that are supplied to the car by the manufacturer.

Latch on mounting frame

The principle of fastening with latches (clamps) is that the body of the radio is enclosed in an iron mounting frame, and is not directly built into the panel niche. This intermediate part, which has special petals with protrusions or grooves (depending on the brand and model of the device), is securely fixed in the niche. The player body is equipped with mating latches that engage when the player is inserted into the socket.

The counterpart of the latch on the body

To unlock the latches and remove the car radio, keys of various shapes are used, supplied by the manufacturer complete with music for the car. They are lost over the years of use of the car, as they are used very occasionally. Typically, the key is a shaped strip of metal or a handle inserted into 2 pairs of holes located on the front panel of the device.

This is what most car radio removal keys look like

In most cases, fastenings are made with bolts, screwed to the brackets and hidden under the front plastic panel. You can’t do without a small set of tools to dismantle this panel and unscrew the mounting screws or bolts.

Key in the form of a handle for unlocking 4 latches

Reference. All of the listed intricacies with hidden fasteners and special keys were invented by manufacturers with one purpose: to make it very difficult for thieves to steal the car radio when the car is broken into.

Location of key holes

Removing the device according to the instructions

How to get a radio without keys

It turned out that take out radio tape recorder from the nest, easier than usual. The main thing is to find what you can use to do this.

Quickly and easily remove the radio from the car.

This video shows how to remove radio tape recorder from standard mount car VAZ Kalina 2. From the standard one.

Using keys music Center it just comes out

How to remove the player - video instructions

How pull out the radio without keys?

If standard keys are lost, you need to make homemade ones, focusing on the shape of the slots. To see them, remove the removable panel of the device and the plastic frame. Here is a list of tools at hand, with whose help owners of different cars manage to unlock the latches:

thin iron strips 6-15 mm wide;
stationery knives;
plastic clamps for wiring;
cloves and straight wire - for round holes;
thin screwdrivers and other similar items that fit the shape of the cracks.

These iron strips can be used instead of keys

Reference. In almost all radios, the mounting slots are visible from the outside, so there is no need to remove the front panel and plastic frame.

Removed first front panel radios

To remove the car radio, use the same method:

Stick first one, and then a second strip of narrow metal (or a stationery knife, a narrow screwdriver) into the technological opening. Feel that any latch is unlocked.
If the turntable is supported by 4 clamps, insert four tools.
Slowly pull the radio out of the niche immediately with the improvised keys.

The strips must be inserted into the side slots

Advice. When using iron strips to open latches, be sure to wear cloth gloves to avoid cutting your hands on the sharp edges.

The music center is removed along with the bands

Video on removing a car radio without keys

Dismantling a standard music center

Read also

Often standard head units (aka radios) are removed using the method described above, since they are attached to 2 or 4 clips. For example, the factory player on a Priora is held on by two latches, and to unlock them, thin steel strips you need to insert it between the pairs of buttons for switching radio channels “2” - “3” and “5” - “6”.

Advice. Before you start disassembling the factory radio, find out about the method of its fastening, so as not to poke pieces of iron at random in this case if you do not find technological openings.

In Priora, stripes need to be inserted between the keys

To remove car radios that are fastened with screws, you need to prepare the following set of tools:

a narrow flat screwdriver or knife;
Phillips screwdriver;
set of small sockets (from 6 to 10 mm).

With this mounting option, the factory player must be unscrewed using the heads

On different brands Auto standard players can be mounted in different ways, but the principle is approximately the same: the device is screwed to brackets that are covered from the outside with a plastic lining. As an example, it is proposed to examine the removal of the radio on Korean car Hyundai Solaris, performed in the following order:

Pry it off with a flathead screwdriver or knife bottom corner plastic decorative panel framing the music center. Pull the edge and grab it with your hand.
Gently pull it towards you and release the first latch, and then move in a circle and unlock the others.
Holding the panel with both hands, remove it and, if necessary, disconnect the connectors located at the bottom.
Use a Phillips screwdriver to unscrew the 4 mounting screws and remove the radio.

Factory car radio Hyundai Solaris

Advice. When dismantling any player, do not rush to disconnect the battery from on-board network, since the device in 10-15 minutes. It may become blocked and, when you turn it on again, require you to enter a security code that you do not have.

Removing the standard device from Hyundai Solaris- photo

Decoding problems

The main pitfall of the described procedure lies in the security code embedded in the memory of most radio tape recorders. The bottom line is this: disconnecting the music center from the external power supply for 10-15 minutes will lead to the fact that the next time you turn on the car radio, you will be asked to enter a security code (usually a four-digit one), without which it will not work.

Advice. Removing the device to replace it with a new one does not pose a problem, unless you plan to use the old player on another machine. In any case, try not to disconnect the battery for a long time.

The device requests a code after connecting to the on-board network

If the card with the code is lost or missing, the issue can be resolved in several ways:

when we are talking about a standard device, then for a certain fee they will help you find the code in dealership selling cars of your brand;
there are offices and individual specialists who specialize in these problems;
the free way is to search for code using different programs.

Serial number location

Regardless of the method you choose, you will have to remove the radio from the socket to find out serial number. It is printed together with a barcode on a tag glued to the side or top of the case. After taking out the device, rewrite these numbers, then try to calculate the PIN code using them using various online calculators on the Internet. If it was not possible to find a suitable cipher in this way, then rent a music center and take it to specialists in this field and get ready to pay for their services.

Fundamental point. If the PIN code of the radio is unknown to you, then when searching on your own, do not enter combinations of numbers more than 3 times! Otherwise, the device will be blocked, and in this state, decoding it will cost significantly more.

The issue of removing a car radio from its socket is not very difficult and will not require much time. But the consequences can be sudden for an unprepared motorist. Hence the last piece of advice: find the lost pin code before turning off and removing the player, in order to save your time and nerves.

VAZ-2101, generator: connection diagram, repair, replacement In the VAZ 2101 car, the generator is one of the power sources. Second - accumulator battery, but it only participates in starting the engine, the rest of the time it is recharged from the generator. how to remove the bottom steering column Yaku steering wheel for Moskvich 412 Izh column. Thanks to this symbiosis it turns out...

On many automotive forums you can often read questions from car enthusiasts about how to remove standard car radio. In this article we will talk about some tricks and subtleties for correct and quick removal. Of course, it should be clarified that it is possible to remove the radio built in at the factory, taking into account the make of the car and the equipment of the car with the necessary keys and screwdrivers.

Absolutely all built-in car radios are protected by fastenings hidden from view. Also, each car manufacturer, of course, uses its own developments, which differ in the process itself: from snapping mechanisms for fastening to those screwed in with special screwdrivers.

Removal Tools

keys, different types, which are usually included head unit at the factory;
screwdrivers, with tips in the form of asterisks or hexagons;
stationery knife;
plastic card - to make withdrawals on some models, at home;
tweezers in order to remove the lining in some cases.

To remove the radio with your own hands, you need to know some little tricks, which will be suggested by the photos below.

According to the design of the radio tape recorder in different cars has a different configuration. There are usually 4 round holes, two rectangular ones. They also differ in their approach to removing the standard radios. Of course, if there are keys included with the car radio, the process will be simple and will only take 5-10 minutes.

Instructions

First you need to dismantle the cover of the radio, in the form of a plastic panel. This should be done carefully so as not to scratch the casing and so that the radio itself is not damaged. Next, sequentially unscrew the bolts that secure the head unit with a screwdriver. Pull out the radio and carefully disconnect the connectors. To do this, pull up the blue stoppers and press the released petal, disconnecting and removing the connector from the radio. The antenna is simply removed from the socket.

The simplicity of these operations does not exclude extreme care and leisure in their implementation. Removing the stock radio is not at all difficult.

Important points

The holes are sometimes protected by screws that need to be removed with a hex screwdriver. Slightly move the grooves apart. The device is pulled towards itself.
Rectangular holes have a different mechanism by which the radio is removed. Two keys are inserted from different sides, until they stop. As soon as you hear a click, indicating that the locking latch has been pulled back and the key is locked, you can pull the radio towards you.
Sometimes, a standard radio requires 4 keys, but with patience and accuracy, it is possible to do everything with two. Having first installed both keys on the left, slightly pull out one side, then do the same for the other side. The car radio has been removed.
If the keyhole is not visually visible, then you just need to remove the volume control, when you see the hole for removing the radio, turn the hex screwdriver counterclockwise and remove the panel. Then it’s also easy to see two screws, and use the same screwdriver to unscrew them.

If you want to see in more detail how to remove the radio, the video shows the process step by step.

In more modern stamps Car radios are designed to match the design of the cabin itself, and the mounts are hidden behind a grille that performs a decorative function. Then withdrawal takes longer and requires additional operations.

The process of removing the radio

Removal of the radio is carried out as follows:

Raise the armrest by removing the glass.
After observing the tensioners hand brake, you need to push the cup holder up. The panel can be easily removed.
Having removed the panel, we will see two screws. You need to unscrew them and remove them.
The screws that secured the beard should be put aside and removed as carefully as possible. The beard is also secured with snaps.
Disconnect the clock connector.
Having disconnected the climate control, we put the beard aside.
After this, access to the radio bolts opens, and removing it with your own hands remains a matter of simple technique and dexterity.

Results

Using these instructions, you will change the car radio in your favorite car without problems, nerves, lost money and time, and you will enjoy the trip to your favorite tunes.

Standard audio systems that are installed on modern cars very often do not meet the needs of car owners. That is why there is a need to install another radio. However, before proceeding with the installation of a new device, it is necessary to dismantle the old one. As you may have guessed, we will talk about how to remove the radio in a car.

Preparatory stage

Preparing for the procedure involves looking for the following things:

user manual;
audio device removal kit;
cotton gloves;
construction hairdryer

The process of removing the radio

Before removing the radio in the car, you must disconnect the negative terminal from the battery. This must be done for your own safety! Otherwise, a short circuit may occur. Be sure to read the machine's operating instructions. It often happens that the procedure for removing the radio is described there. It is advisable to use the manual in printed form, which will greatly facilitate the process.

The next step is to remove the cladding elements. In many cars, they look like ordinary plastic trims designed to disguise screw sockets, which makes the car panel more attractive. To fasten the cladding, small pins or plastic latches are used. To remove the cladding, you need to carefully pry up one part, after which the fasteners should come loose. All this needs to be done quite carefully. If we are talking about a used car, you may need a hair dryer. The fact is that many car owners glue the lining, as the fasteners simply break. In this case, you need to heat the cladding using a hairdryer. After this, carefully remove the plastic and thoroughly clean the surface underneath it. It is not recommended to reuse old cladding; it is better to buy another element.

Next, take the device for removing the radio. Nowadays there are also on sale universal kits such a tool, and those designed for a specific model. Unscrew the screws that secure the frame. After this, unscrew the screws of the adapter (if using a 1 din radio). Next, you need to insert the tool into the holes and press on it, applying some force. As a result of this, you will see the radio coming out of seat. In some cars you have to remove the glove compartment. This is necessary to gain access to the rear of the socket intended for the radio. This will allow you to push the device out from behind. After the case is removed, you need to disconnect all the wires that are connected to the radio. Remember that everything must be done very carefully, because if the wires fall into the hole, pulling them out will be quite difficult.

If our tips on how to remove the radio did not help you, or you encountered certain difficulties in the process of dismantling the device, we recommend that you contact a specialist.

The practical majority of modern car owners try, whenever possible, to get rid of standard factory car radios, purchasing more “sophisticated” multimedia devices to replace them. , with which cars are equipped at the manufacturer’s factory, are often not able to meet the demands made by car enthusiasts. Not a single standard unit used for sound reproduction can surprise with high-quality sound; due to this circumstance, people head to car markets and stores in order to purchase another, more powerful radio. And that's when in the hands of the owner vehicle a long-awaited device, it must first of all dismantle the old equipment before entering its intended niche. In order to correctly carry out this procedure, you need to know how to remove the radio, which will have to gather dust on the garage shelves for a long time.

Removing the standard device

In order for the question of how to remove the standard radio to not cause difficulties during the procedure, you should carefully prepare for it at the first preparatory stage. The preparation process itself consists of first finding the necessary keys contained in a specialized kit for removing a standard audio system. In addition, you should arm yourself with an instruction manual, cotton gloves and a hair dryer.

Step-by-step instructions for removing the standard audio device

So, the car owner has at his disposal not only new unit for quality, but also necessary list auxiliary tools. Now you will need (before removing the standard radio) to remove the negative terminal from the battery. You should never neglect this condition, since the safety of the one who will change the players directly depends on it. Neglecting it important rule may cause a short circuit. In view of this, it is advisable to first re-read the operating instructions for the vehicle. It is worth noting that most of these manuals describe step by step how to remove the radio without unnecessary problems.

The car owner's further actions involve removing the cladding elements. Foreign cars most often equipped with ordinary plastic linings, main function which consists in masking the screw nests. The use of these minor details allows you to give the panel a presentable appearance. The fastening of this type of cladding is small-sized pins and plastic latches. You can remove such a lining using one of the pre-prepared keys, simply by prying it off on one side, which will entail complete disconnection of the fastening element. Naturally, this procedure must be performed with extreme care so as not to inadvertently damage anything. When removing the trim from a used car, you will most likely have to use a hair dryer. This will be needed if former owner Previously, I removed my audio system, and “attached” the broken fasteners with glue. A well-heated lining with a hairdryer will allow the car enthusiast to easily remove the plastic. The surface that opens before your eyes will have to be thoroughly cleaned. After the old equipment has been dismantled and installed in its place new audio system, it will be better if the cladding is not reused, and another, more modern element is installed in its place.

At the next stage, which requires knowledge of how to remove the stock radio without unnecessary nerves and body movements, you will need some pre-prepared tools. Using a certain type of key, you can easily and quickly remove the annoying device. On sale in any auto store you can find both universal and narrow-profile ones, selected for a specific car model. So, first of all, you will need to unscrew all the existing screws, since they are the ones that help hold the frame in place. Next, you need to remove the screws of the adapter (we are talking about removing the 1-din audio device). The key inserted into the hole should be held as tight as possible and, applying some pressing force, try to move the standard audio device towards the output of the socket. A correctly performed procedure will be indicated by a smooth exit of the radio from its seat.

It is worth noting that the range of selected keys will allow you to get the radio from almost any vehicle, but you should take into account important feature some foreign cars, in which you can only get to the sound playback device when the glove compartment is removed. Thanks to this manipulation, the car owner will have free access to the rear cavity of the socket, through which the car radio can be pushed out without any additional effort. After removing the case, do not forget about carefully disconnecting all the wires with which the device was connected. The wires removed from the unit must be hooked in such a way that they cannot fall into the hole, otherwise the car owner will have to work hard to pull them back out.

Conclusion

The tips given in the article will help any car owner to remove it correctly without damaging the body of the device. A step-by-step removal process will not raise any new questions, and using a special set of keys will greatly simplify the task.

Any car driver cannot do without musical accompaniment on his way. This can be either a line of selected tracks on radio channels, or a personal selection of your favorite compositions on a CD or flash drive. But in any case, you need a special device - a radio tape recorder. And if it fails and it’s time to choose a new one, or at least repair the already familiar one, you need to properly dismantle the device. To remove the radio, you need special key, which unlocks a special latching mechanism. How to remove the radio if such a key is not available? Today you will find out the answer to this question.

What to do?

On driving forums you can often come across a popular question: how to remove the radio without keys? Today you will learn about all the nuances and tricks that will allow you to dismantle quickly and correctly. Of course, you first need to indicate that the factory tape recorder is removed taking into account the vehicle model and its configuration, because as we know, a wrench and a set of screwdrivers are required.

Each “music box” is equipped with protective fastenings that are hidden from human eyes. Without a doubt, each manufacturer has its own developments and technologies that can affect the removal process, starting with the protective mechanism and ending with the specifics of the fasteners.

What do we need?

Before you get to work, you need to prepare well:

Get a set of keys of different types that can be used to remove factory equipment.
You will also need a set of screwdrivers that are equipped with tips in the shape of stars and hexagons.
An ordinary stationery knife will also come in handy.
You will need a flat object to remove some components. A plastic card copes with this task perfectly.
Well, don’t forget to find tweezers that are suitable for removing cladding in some cases.

If you want to remove the radio yourself, then you need to be aware of some tricks, which we will talk about. Let's start with the fact that in each car the tape recorder has its own configuration, but most often it has four round holes and two rectangular ones.

Don't forget that different devices and you need to remove it in different ways, but if you have a full set of keys and screwdrivers at hand, which should come with the equipment, then there is definitely nothing to be afraid of.

Important! It often happens that you need to somehow improve the equipment in own car. Accordingly, it is worth understanding some of the subtleties that will help you set up the necessary equipment without the help of specialists, for example.

Progress

How to remove a radio without keys? The question is quite complicated. If you still don’t have the keys at hand, you will have to improvise and make the tool yourself:

First you need to take care of the device's cover, which looks like a plastic front panel. Remove the component carefully so as not to damage the casing and the gadget itself.
Now we arm ourselves with a screwdriver and unscrew the bolts that secure our device.
In order to remove the device, you need to carefully pull the blue stoppers and press the opened petal, thereby separating the parts and pulling the connector out of the device.
The antenna can simply be pulled out of the socket.

All steps are very simple, but do not forget to be careful when performing them. As you understand, removing factory equipment is not that difficult.

Important! Some radios are not famous good quality sound, which is why owners often strive to dismantle them. However, one solution to the problem is manufacturing.

What should you pay attention to?

Often the holes are protected by special screws, which can only be removed with a hex screwdriver. We simply move the freed grooves in different directions and pull the equipment towards us.
Rectangular holes have a slightly different mechanism for dismantling. You need to insert two keys on the sides, rest them to the very end. You need to move them until they click, which will tell you that the protective mechanism has opened. After this, you can pull the device towards you.
There are cases when a standard radio requires as many as four keys in stock, but if you show ingenuity and perseverance, you can cope with two. We simply place both instruments on one side, slightly pull out one part of the structure, then do the same on the other side and get our sound.
Many car owners complain that there is no visual contact with the keyhole. The solution to the problem lies on the surface: just remove the volume control and you will immediately find the ill-fated hole. Next, take a six-sided screwdriver and turn it counterclockwise, thereby removing the panel. There you will easily notice two fixing screws that can be removed with the same screwdriver.

Important! Modern cars equipped with factory radios with a design that is made in the style of the salon itself. In such cases, the fasteners are usually hidden behind a grille, which serves a purely decorative function. Obviously, in such cars the dismantling process will take a little longer and will require additional operations from the user.

So how to remove the radio without keys? Everything is very easy and simple. Replace the keys with thin strips of steel with a width of 7 to 14 mm and do all the same steps as described above.

Important! When dismantling an old player, it is often planned to install a replacement in its place. To do this, we suggest you carefully study the article: