A change of season requires new wheels, this also applies to owners Kia Rio. To select parts for your car, you need to know the engine characteristics and recommended tire parameters. They are discussed at the time of purchase, indicated in the car’s operating instructions and can be easily found on the Internet.

Dimensions

As already said, before installing wheels you need to know suitable size. Usually, when purchasing a car, car dealerships give tires for both seasons as a gift, but for some reason they may not be suitable, and you will need to buy new ones.

First you need to decide on the parameters. The choice of manufacturer recedes into the background - some companies do not.

So, for the 2015 Kia Rio, wheels from 13 to 15 inches are recommended - the engine is designed specifically for these loads. In addition to the diameter, there are other indicators: the width and height of the profile. The first parameter ranges from 17.5 to 19.5 cm, the second is 6–7 cm. Of course, for each modification and configuration Kia car Rio has its own specific parameters, and they should be adhered to. Many drivers winter period They install tires wider than recommended, which gives an advantage in some situations, but in others it is a disadvantage. On such parts the car can become unsettled, which will require increased concentration from the driver.

Kia Rio arches allow operation wide tires, nose low profile tires, which in some cases is 4.5 centimeters high.

Marking features

Tire markings are indicated on the side. It is easy to decipher, for example, the inscription 205/55 R16 94 H means that the tire width is 205 mm, the height is 55 mm, and the wheel radius is 16 inches.

The letter at the end indicates the speed at which the vehicle can travel on that tire. H stands for 210 km/h. The number 94 is an indicator of the possible load. There is a special table of values, in this case 94 - 670 kg per tire. Most often on passenger cars For mobile phones, the indicator is calculated with a large margin, but for minibus drivers, minibus taxis, pickup trucks and tractors should take it more seriously. To calculate the load, the specified number is multiplied by the number of wheels: 670 by 4, equal to 2680 kilograms.

Manufacturer

The second important factor is the choice of manufacturer. To quality and inexpensive tires include the Nokian company. The company produces both studded and non-studded tires.

Other manufacturers: Yokohama, Bridgestone, Tigar and Dunlop. They all produce tires suitable for the Kia Rio. The choice here depends only on the owner.

Bolt pattern

The next indicator in choosing disks is the bolt pattern. On Kia Rio it is designated as 4x100: on a diameter of 100 millimeters there are 4 holes for bolts or studs. The second ones are installed on Kia Rio.

2.09.2017

Kia car Rio has been one of the best-selling cars in its class in Russia for several years. It has gained considerable popularity among car enthusiasts due to its modern technical characteristics, level of equipment and comfort, reliability and unpretentiousness, as well as, of course, appearance and price. I must say the popularity of the car is not limited to Russia and the CIS countries; it is successfully sold in South Korea, European countries, USA and others. Indeed, Rio of the second and, especially, third generations have become one of the most commercially successful cars of the brand. One of important characteristics cars can now be considered controllability, appearance and fuel consumption. They are largely influenced by which wheels are installed on the car. By choosing the right wheels for Kia Rio 2 and 3, you can significantly improve these and some other characteristics.

Kia Rio with stamped wheels and plastic caps

In addition, the choice of wheels will one way or another affect the following qualities of the car:

• Controllability
• Braking distances
• Comfort level in motion
• Service life of suspension parts and tires
• Acceleration dynamics
• Fuel consumption

The wrong choice of Kia Rio wheels can negatively affect any of these characteristics, as well as lead to a significant increase in financial investments in the car

Wheel sizes of Kia Rio second and third generations

Rio wheel size consists of two components - sizes wheel rim and tires. When choosing both separately, you should keep this in mind. Also, if deep tuning is not planned, you need to use what the manufacturer recommends. When using wheels and tires recommended by the manufacturer, full implementation of the vehicle’s capabilities is guaranteed, as well as maximum compliance with the declared characteristics in any traffic situation. On the other hand, using wheels of other sizes can lead to poor handling, reduced suspension life, incorrect speedometer readings and other problems.

The main parameters indicated by the marking of rims are the width of the rim, its diameter, as well as the bolt pattern. To choose the right disc for Rio, you need to know how to decipher its size designations. Let's give an example:

The standard wheel rim size for Kia Rio 2 (2005-2011) is 5.5Jx15, where the first number indicates the width of the rim of the disk (the place with which the tire will come into contact) in inches, and the second number indicates the diameter of the disk, also in inches.

Tires are usually marked as follows: 195/55R15. It is this type of marking that is usually placed on the outside of the tire. The first number in it indicates the width of the tire in centimeters, the second is the percentage ratio of the profile height to the width, the third is the diameter of the rim for which it is intended.

The wheels of the Kia Rio 3 have similar characteristics to the wheels of the second generation car, however, their exact dimensions depend on the modification and configuration. This refers to the wheels and tires installed on new cars when they are sold. Subsequently, they can be replaced with those that have the necessary characteristics or appearance.

You can also install wheels on the Kia Rio bigger size for example 205/55 R16. But this is most likely impossible without making changes to the design of the arches. Although you don’t always have to delve so deeply into the design of a car. Sometimes it is enough to install wheel arch liners so that the tires will not catch when the steering wheel is turned completely to the side and on uneven roads. Size Kia wheels Rio is determined based on opportunity seats in the arches.

We must remember that for a Kia Rio, a wheel size larger than that recommended by the manufacturer may cause deterioration in dynamics, reduced suspension life and incorrect speedometer readings.

Kia Rio wheel pattern

Kia Rio wheel pattern - important parameter which allows you to select wheels for your car. It shows how many studs the wheel is attached to, the diameter of the holes for them and how they are located. The studs to which the wheel rim is attached with nuts are usually located on the hub and their number varies passenger cars from 4 to 6. It is important that the holes in the disk are the same diameter as the diameter of the studs and their number is the same. In addition, you need to take into account other parameters related to the bolt pattern, such as the offset and thread of the fastener. The offset of the disc directly affects its choice for a certain model car, and the fastener thread is needed for correct selection cone centering nuts that secure the wheels on the Rio. The wheel bolt pattern must correspond to that declared by the manufacturer; for Rio it is 4×100 with a hub hole of 54.1, offset ET 46 and fastener thread M12x1.5. This means that the wheels are mounted on 4 bolts located on a circle with a diameter of 100 mm. The use of another bolt pattern on the Kia Rio is not allowed for safety reasons. Here it must be said that the wheels on third-generation cars (2011, 2012, 2013, 2014, 2015, 2016) in terms of fastening do not differ from the second generation (2005-2010), therefore the bolt pattern is the same.

If there is a need to install wheels that do not fit standard hubs, you can use wheel spacers:

Kia cars, Rio and Spectra models are very popular in the Russian Federation. These passenger cars have earned respect due to their high technical specifications, comfort, internal equipment, ease of use, safety and reliability. Naturally, appearance and price factors also played an important role in this matter.

One of the most important characteristics is controllability. vehicle. This indicator is influenced by the wheels installed on the car. The controllability, reliability and safety of driving the Kia Rio and Spectra depend on their wise choice.

Kia Rio on factory wheels

According to the manufacturer, effective handling and aesthetic appearance depend on the size of the wheel used. In addition, high-quality models affect the degree to which:

• controllability;
• braking characteristics;
• driving comfort;
• operation of the main suspension components and tires;
• aerodynamic indicators;
• fuel consumption.

An illiterate choice will most likely lead to negative consequences. For example, handling or aerodynamic performance may deteriorate. Eventually Kia owner Rio will have to be posted additional funds to change wheels and tires.

Optimal wheel size for Kia Rio

The choice of optimal indicators for a wheel directly depends on the sizes of tires and wheels. Accordingly, when choosing Special attention attention should be paid to this factor.

For those planning to do tuning, you should take advantage of the competent advice of experienced craftsmen. They will advise you on the most suitable wheel size and diameter.

Vehicle owners who prefer to use “powerful horses” for their intended purpose can take advantage of advice from Kia Rio manufacturers on choosing standard sizes. At the same time, manufacturers guarantee high vehicle controllability, according to maximum characteristics for any road conditions when using factory wheels.

Installing wheels with non-standard parameters can cause poor handling and poor comfort. Speaking about the characteristics indicating the designation rims, then it is worth highlighting three important indicators:

1. diameter;
2. width;
3. loose bolt

Therefore, the correct choice of disk size directly depends on the wheel used. First of all, you should analyze and decipher the disk designation. For example, the 2011 Rio has a factory wheel size of 5.5J/15. The first indicator is the width of the rim, and the second number shows the exact diameter of the wheel being used. This indicator is measured in inches.

When loosening wheels, it is necessary to take into account the basic parameters declared by the manufacturer. For the Rio 54 by 100 model:

• hole – 54.1;
• departure – ET46;
• mounting thread – M12 by 1.5.

Based on the given characteristics, the wheels are secured with 4 bolts with disc circumferences of 100 mm. Other bolt pattern settings are not recommended for safety and reliable operation vehicle. It is worth highlighting the fact that in terms of fastening, the wheels on Rio 2011-2016 are in no way different from the second edition of the car from 2005-2010. Accordingly, the bolt pattern will be the same.

Competent choice of wheels on the Spectra

The choice of wheel sizes on the Spectra directly depends on the use of steel or titanium wheels with the following standard sizes:

• hub diameter DIA;
• rim width J;
• wheel diameter R;
• bolting and drilling DCO and PCD.

1. Spectra 1.8 – 185/65R15;
2. Spectra 1.6 – 185/65/R14, 196/65/R14;
3. Spectra 2.0 – 195/65/R15.

If the assigned parameters are not followed, this factor can seriously affect the controllability performance, braking distance and vehicle aerodynamics. In addition, the manufacturer removes warranty obligations on a car if factory instructions are not followed.

Wide range of wheels for domestic market offers various variations on Kia Spectra. Popular manufacturers include:

• Continental;
• Nokian.

For Spectra this is the most optimal options tires In addition, their dimensions make it easy to control and maneuver the machine. If a car enthusiast finds it difficult to choose wheels, then you can turn to experienced tire specialists for help.

Wheels for any car are not only an element of the exterior, but also important detail, which can affect the handling of the car as a whole. Kia Rio 2015 is no exception. Many owners believe that replacement standard wheels at Rio 2015 - this is a mandatory procedure that should be performed immediately after purchase. To approach the issue competently, you need to arm yourself with some data.

• The radius of the wheels is 15 inches. With this option, the width of the disk element should be 6 inches. The hub diameter is 54.1, and the offset is 48 mm. The fastening parameters of such wheels are within 4 x 100, and a 12 x 1.5 nut is used for fastening.
• The wheel radius is 16 inches. Technical specifications similar, but the overhang size is 52 mm.
• The optimal tire diameter for the Kia Rio 2015 ranges from 13 to 15 inches.
• The width of the wheels for better handling should be 175-195 mm.
• Acceptable profile height is 60-70 mm.

Parameters of standard wheels for the Prestige package

It is necessary to emphasize that the Kia Rio in the Prestige configuration has a full-size spare wheel. Thus, when it is replaced, you don’t have to think about imbalance or controllability. The standard radius of the spare tire will allow you to get to your destination without loss and repair a failed element.

Standard tires on the Prestige trim have a 16-inch radius. They are rarely replaced by car owners, since the quality Kia wheels Rio is at a very decent level. The width of the rubber is 195 mm, the height is 55 mm. This diameter is considered relative low profile. This indicator often causes fear among newly minted Kia owners Rio. It is believed that low-profile wheels make the ride quite harsh, and they are also more vulnerable on bumpy asphalt and are easily susceptible to holes. Contrary to popular belief, this is far from the case. Replacing such “rollers” on the Kia Rio is not required. They are made of high quality rubber and have increased wear resistance.

Basic rules when buying tires for a Kia Rio

Replacing tires and wheels requires a responsible approach and compliance with some basic rules:

• Spare parts should be selected based on the manufacturer's recommendations. They are reflected in the instructions for Kia operation Rio. It is necessary to choose not only the appropriate diameter, but also the width and height of the profile.
• Replacing wheels is the job of highly qualified automotive technicians. They should be entrusted with the work, avoiding handicraft garage workshops.
• Some manufacturers of wheel parts offer “all-season” for the Kia Rio. Experienced motorists refuse this option so as not to risk their own safety. It is much safer to purchase winter and summer tires separately.
• Replacing elements with “stampings” made in China simply unacceptable. Such wheels on the Kia Rio are very vulnerable to mechanical stress, and the tires are a source of increased noise when driving. In this case, the actual wheel diameter may not coincide with what the manufacturer stated.

Tire replacement and selection parameters

When choosing tires and wheels for a Kia Rio, it is optimal to use the services of automatic programs. Usually they are an integral companion of any online store that offers to buy “rollers” for the Kia Rio. For an error-free selection, you must indicate:

• year of manufacture of the vehicle;
• type of motor and drive;
• radius;
• load capacity;
• the presence or absence of spikes for winter elements;
• seasonal appointment;
• brand.

As for the load capacity, its optimal parameter helps to significantly soften the movement. Quality is important road surface on which the machine will be operated. The worse it is, the softer and more flexible the rubber should be.

Consequences of non-compliance with the technical specifications of wheels and tires

If the rollers are replaced in violation of the manufacturer’s recommendations, the consequences can be very dire:

• Neglect technical requirements significantly impairs the vehicle's maneuverability. Due to the wrong wheel size, handling and traction on icy roads may deteriorate. The car may skid.
• Can be heard in the cabin extraneous noise. They occur due to improper air flow circulation between the rim and the fender liner.
• The hub clamp may prevent the disc from sitting tightly against the base. In this case, the entire reliability of the structure is jeopardized.
• If the rollers are replaced in violation of the manufacturer's requirements, the warranty may be void. This happens when there is warranty case associated with failure of wheel elements and systems. In case of violations, the car owner will have to purchase new spare parts at his own expense and pay for the work to replace them. Denial of warranty repairs is absolutely legal on the part of the official dealer.

Rim diameter is usually specified in inches. It must match the tire diameter.

The width of the rim is the distance between its edges. Usually it is also indicated in inches, although manufacturers give the tire width in millimeters. Current trend- increasing the width of the wheel rims and, accordingly, the tires.

Most often on inside The disk contains the following information: 7.5 Jx16, where 7.5 is the width of the disk, and 16 is the diameter. Reach - 45 mm.

People like to tune these two parameters (diameter and width). Most often, they strive by all means to increase the seat diameter and width of the disk. At the same time, the tire, in order to fit in the wheel arch, becomes low-profile, which warms the soul of many. But at the same time, we should not forget about GOST for the depth of potholes on our roads - there is such a document! A hole up to 5 cm deep and with a sharp edge has a right to exist. And no one will be punished if you damage your car in it. Now imagine what will happen to low-profile tires in such a pit, even a “GOST” one. For example, with standard disks Hyundai cars with a diameter of 15 and 16 inches, owners manage to install... 18-inch ones on Solaris! For example, with a tire measuring 215/35 R18, this solution provides only 75 mm of clearance between the tire seating surface and the road. Such a tire will most likely suffer (the bead may be punctured) even in a “permitted” hole.

However, there is an alternative approach. The point is to try to install the disks minimum size, just so they don't cling to brake mechanisms, and “catch up” with the diameter with a high-profile tire. Among the advantages of this method, it should be noted that the ride is soft and more low price small diameter tires. For example, chassis design Hyundai Solaris(and the co-platform Kia Rio) allows the use of 14-inch wheels. And with a tire measuring 195/70 R14, you get quite normal wheels - a little higher (less than 3%) than the original ones, measuring 185/65 R15. But the softness of the ride becomes like that of a Renault Logan.

It should be noted that the same options for using discs of different diameters are also implemented on crossovers. For example, on Nissan X-Trail of the previous generation, you can install 16-inch wheels, which is clearly evidenced by the re-rolling of this diameter. And the car came off the assembly line with 17- and then 18-inch wheels. Although there are known cases of using wheels up to 20 inches. Here, too, the only question is what do you want to get: a car that gravitates towards an SUV or a tough “sports barn”. The main thing is to know moderation in everything, because the engine and gearbox are not changed.