For European motorists, the Webasto instruction manual has not been something exotic for many years. After all, a lot of cars already come with this option from the assembly line. The device is especially popular in Germany, because such devices were used for serial use by German manufacturers. Even the company name Webasto has become as household name as Xerox in its industry.

Due to the fact that our country is located in a fairly cold climate zone, preheating drivers began to put on their cars on their own. The installation does not take up much space, but it helps to take care of the power plant and other elements of the car.

The dimensions of the device are relatively small. The five-kilogram device is designed for implementation in fuel supply, cooling and onboard network auto. The main task of the unit is to heat the fuel supplied to the system, as well as to preheat the passenger compartment. vehicle.

Installation and initial setup of Webasto should be carried out by specialists at a service station.

Remote start is carried out using one of the types executive devices sometimes referred to as controls. The unit, with the help of its own pump, begins to take fuel from the gas tank through its tubes. After that, combustion without flame is formed in the closed compartment (catalytic oxidation). Due to the increase in temperature, special pins made of ceramic material are heated.

Scheme of operation of the Webasto preheater

After that, the built-in pump is started to circulate the supplied fuel. Ceramics heats up the liquid flowing from the tank into the combustion chambers. Due to the passage through all regular channels, including in the area of ​​\u200b\u200bthe interior heater, the cooling system is heated in a small circle. Reaching a temperature of 40 C for the coolant, there is an automatic shutdown.

If this device starts at the set time, and the Webasto timer has not yet completed the entire cycle, then heating can occur up to a temperature of 80 C, then there is a decrease to 64 C. Then the maintenance mode starts, which will turn off only after the set timer. Arriving at the garage or parking lot, the driver sits in warm car and start the warm engine.

The most convenient service for diesel engines especially sensitive to changes in ambient temperature. While driving, Webasto can periodically turn on if the air temperature is below +5 C. The average fuel consumption is about 1 liter per hour.

Air types of preheaters

Before you buy and use Webasto, you need to find out which of the existing systems is suitable in the best possible way for your car. After all, there is also air systems. They consume about 0.2 liters of fuel per hour.

Varieties of Webasto

The built-in pump pumps fuel for combustion. At the same time, air is blown from outside the car. Formed in the combustion chamber air-fuel mixture and combustion takes place with the release of heat. The body is taken through the heat exchanger. Heated air is supplied to the cabin, and the combustion products exit through a pipe connected to the muffler.

Unlike liquid, which is placed under the hood, installation air heater carried out in the car. Their sizes are about the same.

Ways to start Webasto

In order to turn on Webasto, there are three main ways: a keychain with a remote control remote control, the built-in timer in system of start, mobile phone.

Setting the Webasto timer

1. Estimated value of a keychain with remote control launch is about 10 thousand rubles. Typically, the range allows you to start heating at a distance of up to 1 km from the car. In the settings, the driver can set the exact period of time during which the temperature starting characteristics will be maintained. It is believed that starting Webasto using the remote control is more comfortable than programming the system with a timer every time. After all, by pressing the button before the end of the working hours, you can accurately warm up the car without wasting fuel. However, it is necessary to control whether the heating has started and whether radio interference or other barriers have prevented the start. A signal from the key fob will tell you about the launch.
2. The cheapest option to turn on Webasto is timer. Its cost is about three times less remote control. It is mounted in the cabin in the visible part of the panel. For installation, you will need to clearly synchronize the time of the device with real time. Then two parameters are programmed: the duration of heating and the moment of start. Most often, intervals can be set from 10 to 60 minutes.
3. Launch method from the phone involves the installation of a GSM-unit. His average price one and a half times higher than the key fob start. The signal can be sent regardless of any obstacles or distances. In fact, this can be done from anywhere in the world. The module will respond to an SMS message sent to the number assigned by Webasto. Maximum number connected phone numbers is five pieces. This means that at least five drivers can independently start the engine heating. As an "advanced" diagnosis of the engine warm-up condition, you can download applications to a smartphone or tablet with all popular operating systems. The information will be sent online to the mobile device.

Using the system

The fuel preheater must be handled with care. It is not recommended to apply mechanical action to it, to allow liquid or other aggressive media to enter it.

It is strongly not recommended to use the device in a garage without forced exhaust. If it appears extraneous noise or smell from the device, you must immediately turn it off. If it is impossible to do this in the usual way, it is enough to remove the fuse for this.

Only the fuel specified in the instruction manual should be used. Once a month, as a preventive measure, it is required to run the device with a cold engine at minimum power. No need to turn on Webasto several times in a row. The maximum allowable period of continuous operation is 60 minutes.

Benefits of using preheat

FROM installed system Webasto can easily start the engine even in very coldy less than 20 or 30 C, because the fuel enters the system already heated. There is a significant saving of time for warming up the engine, because this can be done remotely.

Preheater Kit

The health of the driver is protected, as the cabin also warms up to an acceptable temperature. Also beware power point, which spends its resource during a cold start equivalent to 100 to 200 km of run. Preheating reduces emissions, which is more environmentally friendly than standard engine preheating.

Warming up on a cold engine is more expensive, since fuel system"eats" with an unheated engine much more gasoline or diesel fuel. In this case, the car immediately starts to work in a warm, economical mode.

Rules for installing preheating installation

A certificate issued by an official representative office will help not to get to unscrupulous "masters" for installing this equipment. German manufacturer in Russia.

You need to know that the certificate is issued for a limited period, usually 1 year. Perpetual permits The manufacturer does not offer

If there were any problems with the installation or subsequent operation of the customers, then no one will renew this document. You also need to know that no one issues perpetual installation permits. The document must have an end date.

To verify the authenticity of the documents provided, you can go to the official website of Webasto. From the installer company, the user will receive a numbered warranty card in Russian.

The price of products is controlled by official representatives and a single cost is formed for each model. The difference can only be in the cost of work at the service company.

Selection of the unit according to the parameters of the car

When choosing a set of equipment, you need to focus on the parameters of the vehicle. For cars with an engine up to two liters, a four-kilowatt is suitable Themo Top E. If the engine size is larger, then you need to take EVO5.

The next step is to select a governing body. There are three options to choose from depending on your budget. For inexpensive car usually they set a mini-timer with the ability to install a launcher for the next day. Its installation is carried out on the dashboard.

Use as a remote start TermoCall 3. This is a receiver for GSM signals from phone calls or SMS. It also connects to android applications.

The owner of Webasto can remount it from one of his cars to another. The resource pledged by the manufacturer is approximately 9-10 years. Therefore, car owners often transfer the unit to each of their purchased cars, sparing the fuel system and engine each time.

You can download it on our website for free.

If you bought a car with starting preheater, but have never used such devices, and the previous owner did not bother to provide you with instructions for managing Webasto, then first of all you need to understand.
The main unit of the heater is the boiler, to which the following are supplied:

• fuel line;
• branch pipes for inlet / outlet of coolant;
• electrical wiring.

In addition, an air intake and an exhaust pipe are attached to it.
Principle of operation: the fuel burning in the boiler heats the coolant. It circulates through the cooling system in a small circle, including the interior heater radiator and warms it up, and with it the engine. Circulation is carried out by the operation of an electric pump embedded in the cooling circuit. The heater can also warm up the car interior - its control unit automatically turns on the standard heater fan when the coolant is heated to a certain temperature (more than 40 degrees).

Very often, a Webasto heater is installed instead of an expansion tank.

Turning the Webasto on and off is possible both manually from the salon and remotely. The operation of the device can also be programmed by setting the mode you have chosen using the timer. Also, more equipped heaters are equipped with a GSM module for remote control using a telephone. But you should not carry out a test run from afar, not being able to control the process.
Also consider the air temperature - if the car is diesel, most likely, you will have to turn on the heating of the fuel.

Before the first attempt to start the Webasto heater, precautions should be taken.

Before the first attempt to start the Webasto, precautions should be taken. Inspect everything related to the heater. First of all, pay attention to whether there are traces of fuel leakage along the entire line - from fuel tank to the heater. Look also exhaust pipe– is it clogged with dirt, snow, etc. Check the integrity of the wires and their connections.
And, finally, a test run should be carried out in an open area - after all, you should not joke with burning fuel. Be sure to keep a fire extinguisher handy.
It is possible that the machine will be needed urgently and there will not be time to properly inspect. Just keep in mind the possibility of an emergency situation.

How to turn on Webasto manually?

With the GSM module, it is possible to control the Webasto heater from a mobile phone.

The cabin control panel is usually mounted on the instrument panel - so that it is convenient to configure the Webasto from the driver's seat.
To get started, familiarize yourself with the remote control by examining the symbols on its buttons. To start Webasto, find a button with either a flame or a similar symbol. In any case, the image will be clear - it may look like the symbols of the glass heating buttons or the icons located at the buttons (handles) for controlling the standard heater. Webasto is turned on by pressing this button, and the operation indicator will light up on the display. Pressing it again will turn off the heater.

It must be remembered that after three failed attempts Webasto start may be blocked.

It must also be taken into account that the device may be blocked after three unsuccessful start attempts. Try by removing the fuse from the power circuit. It is also possible that the heater has already been blocked before. If the attempt to turn on Webasto from the remote control still failed, then most likely you will still have to turn to specialists for help. They will also tell you how to properly turn on Webasto.
The first start-up after a long idle time of the heater may take some time to pump the fuel system of the device. In addition, before starting, you need to make sure that there are no air locks in the branch pipes - overheating of the temperature sensors will lead to an emergency shutdown.
You can also turn on Webasto with the engine running, using it as auxiliary heater cabin, or rather, to increase the air temperature. This is especially important if you have a car with diesel engine- "stoves" of diesel engines do not warm up well, and on Idling in severe frosts and heaters petrol cars cease to qualitatively "heat" the interior.
In order to turn on Webasto without a remote control (if it is broken or missing for some reason), you will have to find a way to “bypass” the control electronics. But at the same time, you run the risk of damaging the device, for example, by overheating it.

Purpose of the Webasto modular timer control buttons

On the display of the control panel, when the ignition is switched on, flashing symbols will appear - if the timer is not set. If the display is continuous, then the symbols indicate the current time. The buttons marked with left and right arrows change the time values. If they are not pressed for about 5 seconds, the settings are saved in the controller's memory.

When calculating the duration of operation of the Webasto heater, one should take into account the air temperature, the condition of the battery and the power of the heater itself.

In order to set the time on Webasto, press and hold the button with the clock icon for two seconds. When the symbols start flashing, use the “<” и “>” set the time. The display of the day of the week also changes. The "P" or "SET" button is designed to select the heater operation program and allows you to set automatic switch on Webasto. Press it until the program number starts flashing on the display. Then use the arrow buttons to set the start time and the day of the week, proceeding to its setting by pressing the "clock" button. Subsequent short presses of the “P” button will sequentially cause a change in the program number until the current time is displayed.
How much to include Webasto - it's up to you to decide. With an approximate calculation of time, it is necessary to take into account the air temperature, the condition of the battery, and the power of the installation. The operating time is set when the heater is switched off by pressing the button «<» в течении трёх секунд. Время работы изменяется кнопками «<» и «>».
But the first start-up is more prudent to carry out without a timer.
In the future, during normal operation of the device, you can try to turn on Webasto from the remote control. The radius of its action is usually at least 1 kilometer.

But still, even if you learn how to turn on Webasto yourself, study the instructions for use as soon as possible. It contains information about the operating rules, the observance of which will increase the period of uninterrupted operation of the device.

In the conditions of severe Russian winters, the Webasto starting heater will become an indispensable device for any motorist. The heating unit from the German brand is installed in the engine compartment, connecting to the cooling system, fuel tank and on-board electronics. The engine is heated by the circulation of heated antifreeze passing through the radiator and pumped by an independent pump. The function of the device also includes starting the fan, heating the interior. The use of a preheater helps to increase the service life of the engine and other automotive components.

Webasto controls:

Non-remote ways to turn on the Webasto preheater

MultiControl Timer

The most budgetary and affordable way to remotely activate engine preheating is a small timer installed in the cabin of your car. The driver independently programs the required time for switching on the system and the duration of the heater operation. Depending on the required conditions, the duration of the timer can be from 10 minutes to 1 hour. At the same time, the motorist, while in the car, can start Webasto by pressing one button.

When activating, time zones should be taken into account. The manufacturer categorically does not recommend using the heater in the following places:

• At gas stations and oil depots;
• In areas where combustible gases or dust may accumulate;
• In closed garages and other premises.

When entering the menu, the user controls the clock in the settings mode while the characters are flashing. All installations are simple and easy to use. It is possible to determine the schedule for the week ahead.

Of the advantages of installing a mini-timer, one can note:

• Low cost of purchasing the device;
• Ease of use.

Of the minuses, it is worth highlighting:

• The need to enter the exact travel time in advance to start the heater;
• Possible violation of the aesthetic appearance of the cabin when mounting the device.

How to start Webasto remotely

Remote control Telestart T91

An alternative to a timer is to install a remote control. This method is perfect for car owners who leave cars close to home. The main condition for the functioning is the presence of a car in direct line of sight, at a distance of no more than 1,000 meters. Its use helps to activate the system at any time convenient for the driver.

To determine the signal strength, a special indicator is located on the remote control display.

The benefits of using a remote control include:

• Convenient control of turning the system on and off at any time;
• Control over work through the keychain screen.

Among the shortcomings can be identified:

• More impressive cost compared to the mini-timer;
• Finding the car in direct line of sight from the driver.

GSM modules

A popular type of Webasto remote control is GSM blocks. The activation control is carried out from any cell phone using a call, text message or mobile application for Android or IOS. The sender of the signal can be anywhere in the world.

The German concern "Webasto" is the world's leading manufacturer of automotive climate control systems. In the summer, when the temperature is above zero, few people remember the Webasto. The concern's products become especially relevant in winter, when it is cold and frosty outside. The most popular of them among car owners is a liquid engine preheater. The principle of operation of "Webasto" (preheater) is reduced to heating the air in the cooling standard mechanism. Air heaters and climate fluids of this brand are no less common. By the name of the concern, the goods produced by it were designated. And often modern car owners call "Webasto" not only the products of this brand, but any other heating devices for cars.

Although among motorists this name is assigned not only to the entire list of products of the concern, but also to its analogues created by other manufacturing companies, most often speaking of Webasto, motorists mean an autonomous engine heater installed under the hood of a car, the main function of which is preliminary ( before switching on) warming up the engine.

The principle of operation of "Webasto"

How the device works, you can learn from the instructions that come with it when buying and installing. The engine preheater - a device measuring about 25x10x17 cm - contributes to the trouble-free heating of the passenger compartment, free from snow and ice, car windows. Webasto is installed (how the mechanism works will be discussed below) in the engine compartment under the bumper or hood.

Further, the afterheater heat exchanger is connected to the cooling circuit of the motor, the electronics to the on-board network, and the fuel supply system to the fuel tank of the car. The inclusion of "Webasto" is carried out either using a special programmed timer in the cabin, or at a distance of up to 1 km using a remote control. From the moment the afterheater is turned on, air and fuel begin to be supplied to the combustion chamber, a mixture of them is ignited and, as a result of combustion, heats the liquid in the heat exchanger reservoir. The warm liquid, in turn, is pumped through the cooling circuit by the heating system pump, warming the radiator of the car heater ("stove") and the engine. The standard heater automatically turns on the fan, which is pre-set to "warm", and it is he who supplies warm air inside the cabin. The principle of operation of the Webasto heater allows you to adjust the heating process also automatically, when the "threshold" (81 degrees) temperature is reached, the heater is temporarily turned off until the temperature drops below the "threshold" (64 degrees). For 1 hour, "Webasto" warms the antifreeze in the cooling circuit, providing such an influx of heat, which is typical for five powerful boilers. Moreover, it consumes no more than 0.5 liters of fuel during this time.

Than "Webasto" with remote autostart of the engine?

"Webasto", unlike remote systems, can be installed on any car. This is its main advantage. But there are additional ones:

1. When installing a car alarm with a function, it is mandatory to leave one of the keys in the car, which is fraught with theft.
2. Starting with a car alarm can lead to premature engine wear, which cannot happen with a Webasto. After all, starting the engine at an air temperature of minus 20 degrees is equivalent to thousands of starts at a positive temperature.

When the diesel engine is running, the temperature of the coolant is not able to rise above fifty degrees, therefore, not a single climate control system, except for the Webasto engine heater, will be able to change the temperature in the car to a comfortable one, since if the temperature drops below the required when the engine is running, parameters, the heater will turn on automatically and will work until automatic shutdown, until the temperature becomes appropriate (+70 degrees).

Advantages of "Webasto"

The principle of operation of the Webasto heater allows the mechanism to have the following advantages:

• reliability;
• noiselessness;
• heating speed;
• democratic value;
• autonomy.

What gives the purchase of a pre-heater "Webasto"?

Heating systems "Webasto" are designed to create comfortable climatic conditions for diesel and gasoline vehicles. Their use contributes not only to the enjoyment of the process of using a car, but also allows you to significantly reduce the cost of fuel and repair of many elements of the car, as well as reduce the degree of engine wear.

Profit by acquiring

In order to make sure that the car will say a sincere "thank you" to the owner who purchases "Webasto", the principle of operation (reviews of all motorists without exception speak about this) which deserves only praise, it is enough to see the device during operation. Thanks to the operation of the preheater, a warm engine starts easily and quickly in any climatic conditions, which saves not only the owner’s strength and nerves, but also significantly reduces fuel costs for this procedure, the overall load on the battery and, of course, the amount of harmful emissions into the atmosphere.

warming up

Reading the operating instructions for "Webasto" (how it works), a potential client understands that from the moment the heater is installed, he will have at his disposal a warm car interior at any time of the year, regardless of weather conditions.

Glass cleanliness - traffic safety

Using "Webasto" (how the mechanism works was discussed above), you can be sure that the glasses are clean in any weather, no additional effort is required to clean them. No ice and snow, no frozen wipers. Only a great review from the very start of the trip.

Equivalence of price and advantages

The acquisition of Webasto pays for itself in the first two or three months of operation.

Ways to start the engine heater

There are several common ways to start the Webasto engine preheater:

The principle of operation of "Webasto" provides for the possibility, using a standard timer installed on the dashboard, to pre-set the operating mode of the heater. In addition, you can disable and enable the mechanism by pressing a button while directly in the car.

The remote start system (which is facilitated by the Webasto principle of operation) allows you to control the operating mode of the heater at a distance of up to one kilometer. The control panel has feedback from the heater (on/off time,

It is customary to use the remote start system from a mobile phone, being more than a thousand meters from the car. In this case, any phone can act as a remote control if it supports the tone dialing function.

If you have a Webasto heating system installed in your car, you are very lucky. This is one that will allow you to avoid all those unpleasant things that a driver faces in the winter. However, to evaluate the effectiveness, you need to learn how to use it. In fact, there is nothing complicated in its operation, you just need to know some of the nuances. We will tell you step by step how to use Webasto. But first, let's try to figure out what this system is.

What is Webasto

Webasto is a heating system that is of high quality and has many other advantages. To date, Webasto offers drivers two types of system - Thermo Top Evo-4 and Thermo Top Evo-5. Their only difference from each other is power. For the first system, this figure is 4 kilowatts, for the second - 5. Webasto is installed in accordance with the engine size.

In fact, Webasto is a small combustion chamber. It is installed in the space under the hood of the car and connected to. The engine is heated by heating the antifreeze. An autonomous pump drives liquid through the cooling system. The heating system is also connected to the standard interior heater and turns on the fan.

Thanks to this, by the time the driver arrives, the engine is already heated to the required temperature. The engine starts warm and there is no need to wait for it to warm up. As a result, by reducing the load, the motor resource is significantly increased. At the same time, engine wear during a cold start is equivalent to a run of 100 kilometers.

And most importantly, what the Webasto system provides is maximum comfort for the driver and passengers. It doesn't matter what the air temperature is outside the window - the interior is always warm, eh. In addition, with such a heating system, you forget about frozen seats, an icy steering wheel or stiff limbs.

It should be noted that Webasto is somewhat - half a liter per hour. However, in practice this increase is offset by a general decrease in fuel consumption in winter. At the same time, Webasto uses the energy of a regular battery to turn on the fan and other elements of the climate system. Therefore, you must monitor its condition. If it is charged, Webasto will not be able to discharge it during operation.

Webasto management

There are three ways to control the Webasto system:

• timer;
• remote control;
• cellular telephone.

Let's consider each of them in order.

Timer

This is the cheapest way to activate the system. A mini-timer will cost you about 3100 rubles. It is installed in the car interior and works at the time programmed by the driver. You only need to set the time at which you usually leave for work and the desired duration of heating. Heating can be turned on for 10–60 minutes. While in the car, you can turn on Webasto immediately using a separate button.

Remote controller

The cost of the remote control is about 10 thousand rubles. With the help of such a device, you can turn Webasto on and off from a distance of up to a thousand meters. Naturally, you can also set the duration of the system. This method is suitable for those drivers who.

Using the remote control is more convenient than programming the mini-timer every time. Many drivers simply forget to do this all the time. And the remote control allows you to turn on Webasto at any moment with the touch of a button. But there is one caveat - obstacles in the form of radio interference, electrical wires, etc. can reduce the range of the device. Therefore, follow the indicator that displays the signal level.

Mobile phone

Activating Webasto from a cell phone is the best option. To do this, you need to connect a special ThermoCall GPS unit, the cost of which is about 14 thousand rubles. With a mobile phone, you can use all the functions of the heater. You can activate the system from anywhere in the world. To do this, send an SMS to the number assigned to your Webasto.

It is possible to assign access to system management to 5 independent telephone subscribers. That is, who uses the car, can control the heater from his mobile. This feature is very convenient for those who have one car for the whole family.

Such a system is sold as a module with an antenna. It can be compactly placed near the Webasto heater. The module will not be visible to prying eyes. Webasto Thermo Call works from a SIM card. It is sold separately from the device itself.

Note that there are also Webasto applications for smartphones and tablets (the cost is about 400 rubles). You can buy them on iTunes and Google Play. With the help of special programs, you can constantly monitor the heating of your car, and you will also receive information about its condition directly to your phone. The messages will receive data on the temperature in the cabin, alarms, and so on.

Webasto operation

In the instructions for the Webasto heater you will find recommendations on how to use it. Among the main requirements is to avoid mechanical impact on structural elements, their immersion in liquid, exposure to caustic substances or electrical discharges. and air humidity.

To avoid suffocation, it is forbidden to use Webasto in enclosed spaces (eg garages). heating system is recommended to be switched off. In case of unusual noise, smell, smoke, etc., the unit must be blocked immediately. This can be done by removing the fuse. After that, the heater must be taken to the service.

The video shows how the Webasto heater works:

For Webasto, only fuel that is indicated in the instructions can be used. The same goes for antifreeze fluid. Once a month, the system must be activated with a cold engine, at minimum fan power. In this state, it should work for ten minutes. This is a mandatory preventive measure that will avoid breakdowns. In addition, it is recommended that the heater be checked annually by a car workshop.

Do not turn on Webasto several times in a row. It should not work more than one hour. In order to, after turning off the system, leave the engine running for a few more minutes.

The Webasto system can operate in two modes - winter and summer. In the first case, it provides interior heating, and in the second - ventilation. Working in winter mode, Webasto heats up the coolant, in summer mode it only turns on the fan.

First launch of Webasto

Initially, the Webasto heater is set to winter mode. If you plan to use this mode, before turning on the system, set the standard heater to the “Heat” position. If you have a three-stage fan - set it to the first division, and if you have a four-stage - to the second. In the event of any malfunction, the system should be blocked - an electronic blocking function is provided for this.

The operation of the heater is controlled automatically. The "smart" system takes into account and is equipped with a multi-stage security system. Using the control panel, you can choose the optimal heating mode.

The video shows the principle of operation of the Webasto heater:

Webasto is a very flexible and multifunctional system. Therefore, you can choose exactly the configuration that best suits your car. The system is able to meet the needs of the driver, regardless of the dimensions of the car - it equally well heats up and ventilates an SUV, a minibus.

Webasto thermostat

You can regulate the intensity of the heater using a special thermostat installed in the car. In order to turn on the system, you just need to turn its knob clockwise. The system independently, in automatic mode, regulates the intensity of the heater, taking into account the temperature difference. You can increase the heating level by turning the thermostat knob from left to right. The thermostat is equipped with a special indicator that indicates a malfunction of the heater.

Multi Comfort control panel

The Webasto control panel can have four or five operating modes. It depends on the modification. The so-called turbo mode is provided, as well as a mode in which at an altitude of more than 1.2 kilometers above sea level. In addition, the panel can be controlled remotely by connecting the control function via a mobile phone.

The Multi Comfort panel is used for 12 or 24 volt vehicles. With its help, you can set any temperature within 5-30 degrees. The control system is also equipped with a device that detects fault blink codes.

The video shows the prevention of malfunctions of the Webasto heater:

Using the panel, you can boost the heating output by ten percent. This feature is very relevant at extremely low temperatures. You can connect your Multi Comfort to a dedicated remote control and control it from a distance.

How to use the remote control

The remote control that provides Webasto remote control has a compact size. This allows you to always carry it with you, as it can easily fit even in your pants pocket. With it, you can start or stop the heating function, as well as select the mode and time of the system at a distance of up to 1.2 kilometers. The remote control is equipped with an indicator that confirms the receipt of a signal by the heater.

The model is equipped with only two buttons and an indicator, so it is very easy to use it. You can also use the remote control to control the machine's fan. To do this, you just need to set the ventilation mode on the transmitter. When the pre-set heating/ventilation temperature is reached, the system switches off automatically.

Some rules must be followed. Keep it out of direct sunlight and keep it out of the cold. Also avoid moisture and dirt. To achieve a stable signal, you should be in an open area or on a hill. Some Webasto remotes are equipped with a display for the convenience of the driver. It needs to be wiped from time to time with a dry, clean cloth.

Now, knowing the basic nuances of the Webasto system, you can use it without difficulty. It will provide you with maximum comfort and will allow. Rate the possibilities of Webasto!

Please leave your comment on the article! We are interested in your opinion.