Many people have seen cars with equalizers on the rear window on the streets of their city. This is a beautiful and interesting tuning option that has a lot of positive aspects.
We try to develop and constantly expand the collection of equalizers with new items. Full range available on this moment models,
However, often we all want to do something of our own - “exclusive”. Add a little imagination and truly surprise others. All auto tuning (light tuning in particular) is aimed precisely at this.
That's why we decided to try to develop a manufacturing technology car equalizer with your own hands.
The first option was to try to make it LED. But this approach had to be abandoned immediately. There are several reasons. First of all, the LEDs will have to be soldered onto the board, moreover, it will be rigid and massive, and on the one hand this is expensive, on the other hand it is very inconvenient to install. The second reason is the huge amount of work. Not only do you need to solder the controller yourself, you also need to solder a bunch of diodes onto the board (even if you make only 20 rows and 40 columns, that will be 800 diodes, which will also have a large total power consumption).
In general, this option is not acceptable.
That is why we offer you a very unexpected and surprisingly simple option for making such a device. Moreover, this approach gives you an unlimited range of design possibilities. You can not only make an equalizer with your own hands, but also make it in any size, in different colors + make drawings and inscriptions!
It can also be used not only in a car or at home, but also on clothes or other accessories (at the end of the article we will provide good example about this theme).
So - it's time to act!
When all 5 pieces of neon are connected to the wires, you need to check them. We take the controller and connect it to the 12V power supply. We take one neon cord and insert the red wire coming from it into the hole of the plug to which the red wire fits. We insert the black wire into the adjacent hole.
We tap the controller with our finger - the neon should light up (the sound sensor will work).
We check all the pieces in the same way. If everything works, let's proceed with the installation. We pierce a hole in the surface, insert neon into it and carefully glue it along the contour of the picture.
We used superglue. It was possible to glue it, but it was very inconvenient and unreliable. Superglue, as it turns out, doesn't stick well to paper.
We install all the pieces of neon in their places.
Then let's get started with the connection. First of all, you need to pay attention to the controller plug. The first terminal (to which the red wire goes) is “plus”. You will need to connect all the red wires from the neon pieces to it. Because All of them will not fit there; you need to twist them together and solder one to them, which then needs to be inserted into the terminal.
Then there are the holes for the minuses. The hole closest to the red corresponds to the lower sound level. Those. the neon, the minus of which will be connected to this terminal, will light up first.
The holes following it go in increasing volume. We do not use the last hole. We don’t need it (this is another “plus” terminal).
This way we connect all the pieces of neon. If everything works, great. If not, it means there is a short somewhere. Check that the connection is correct.
So - here's a video of our "test" equalizer. As you can see, everything works. It is obvious that this technology has excellent prospects!
This technology can be deployed much more widely if desired. Goodness exists. You can make a large and complex pattern, with individual sound-dependent elements. You can also decorate individual elements. For example, the first thought that came to our mind was to make rings around the speaker and on its grid. A large ring to the outer diameter, and rings with smaller diameters in the center. You will get a ring “rainbow” glowing in time with the music.
We hope that the technology for making a neon equalizer with your own hands is clear to you. Now all you have to do is show your imagination and make your own design, and even if you have never encountered this kind of work, you can handle it in one or two evenings without any problems. it's really a very simple thing.
Many car owners try to give their car special parameters that are not similar to others. Some try to improve specifications of your car, in some cases bringing the performance serial car almost to the characteristics sports cars. Others are trying to increase the cross-country ability of already good SUVs. Such modifications relate to tuning, and a large number of car enthusiasts “suffer” from them - from those who have just received driver's license to “respectable successful guys.”
But such a trend as facelifting, which for some reason is also classified as tuning, is more characteristic of young people. They try to externally give individuality to their car by replacing bumpers, attaching spoilers, body kits, applying vinyl or airbrushing, and equipping the car with high-quality acoustics.
A special place in facelifting is occupied by equipping the car with additional lighting equipment. In addition to replacing standard optics with more “advanced” and modern ones, the car is often equipped with additional lighting equipment. – now the phenomenon is not so rare.
Recently, another type of car lighting equipment has appeared, which appealed to those who like to add features to their car - equalizers.
Features of equalizers
Blue equalizer on the rear window
This equipment creates a luminous equalizer image on the car window, which pulsates depending on the frequency of the music. Essentially, this is the same equalizer that every car radio usually has on its display, but only significantly increased in size. In itself, this equipment does not have any positive function; it simply translates the sound of music into a light indication, which... Therefore, do not be confused this type equipment with an equalizer that fine-tune the sound of music.
The image shape of such an equalizer may be different. The most common are the columns responsible for a specific sound frequency. The coloring of such equipment can be of the same type - they all have the same color; during operation, such equalizers display only single-color columns increasing or decreasing in height, divided into segments.
There are also multi-colored equalizers. Each column has several types of segment colors, each color is responsible for a certain range of sound frequencies. For example, a low frequency sound is colored red, a medium frequency sound is green, and a high frequency sound is colored blue.
Some expensive equalizer models may include several types of light images, for example, there are round multi-colored light indicators on the sides and columns in the center.
Equalizer sizes can also be different. Some are small in size and suitable even for use on side windows, while others are quite large and can cover the rear window completely.
The most convenient place to install such equipment is the rear window. His dimensions allow you to equip your car with large-sized lighting equipment. Some also install equalizers on side windows rear doors, but this is not always justified.
How a car equalizer works
Equalizers for the rear window of a car have a relatively simple design. There is a tape on which LEDs are attached, forming segments of columns or circles. Moreover, the tape and the LEDs attached to it are usually transparent, so they do not interfere with the visibility of the car during the day. The number of segments that light up depends on the voltage that the control unit supplies to them. The unit itself is equipped with a very sensitive microphone that picks up sound in the cabin.
Setting the equalizer
This microphone regulates the voltage, which is then supplied to the LEDs. When certain frequencies sound weak, the voltage is applied small, which is why only the lower segments of the columns glow. As the sound frequency increases, the microphone begins to transmit more voltage, causing more segments to light up.
The entire design of this equipment consists of a strip with LEDs attached to it, wiring, a control unit equipped with a power button and adjustment of the sound sensitivity of the microphone, as well as an adapter for connecting to on-board network auto. This is the peculiarity of the equalizer design. It does not require connection to the car radio; its operation depends on the volume of music in the cabin.
Installing an equalizer does not require special knowledge, so anyone can do it.
The LED strip around the perimeter is equipped with an adhesive strip closed protective film. To install this tape, just remove the film around the perimeter and lean it against the rear window of the car with inside so that the adhesive strip sets. If you couldn’t glue it straight away right away, you can carefully peel off the tape and stick it again.
Then this tape is connected to the control unit. The wire coming from the unit is long enough to hide it around the cabin when installing it to avoid damage. The wiring must be laid so that the control unit is within reach of the driver. The best option is a storage box between the front seats. There this block will not interfere. There should be enough wiring to place this unit between the seats.
Typically, this equipment is powered from the cigarette lighter socket. For this purpose, an adapter for connection is included with the equipment. One end of this adapter is connected to the control unit, and the other - with a special adapter into the cigarette lighter socket.
This is the entire connection sequence. All that remains is to check the functionality and adjust the sensitivity of the microphone. To do this, you need to connect the equalizer to the on-board network and turn on the power to the control unit. Then you should turn on the music on the radio and use the adjustment wheel to select the microphone sensitivity.
Installing this equipment is not difficult, and given that LEDs are used as light elements, there will be no significant voltage drop in the car’s network.
The light equalizer on glass certainly looks beautiful. But keep in mind that this is common lighting equipment, which only works well in dark time days. Therefore, if the car is rarely used at night, and the owner himself is not a music lover and does not like loud music in the cabin, then an equalizer, in fact, is not needed.
Finally, it is worth mentioning the legality of using light equalizers on a car. In the rules traffic There is no clause prohibiting the use of this equipment, therefore there is no fine for it, although it is quite possible that one will appear soon.
However, an accident may indicate that the equipment has become a distraction and this condition already provides for a fine. But here, too, it is still necessary to prove that it was the equalizer that caused the accident.
I may not be a huge Justin Timberlake fan like the author of this tutorial, but I couldn't help but notice the stunning graphics in his music video for LoveStoned. This tutorial will teach you how to create a similar effect using just good old Photoshop.
This is what we will achieve:
Lesson materials:
Step 1. Create a new document with size 1024x768 px, background color - black.
Step 2. Open the equalizer image. I selected the black background of the image using the Magic wand(Magic Wand Tool) and deleted it by clicking Delete, despite the fact that black matches our main background. Now, click on the area surrounding the equalizer and invert (Ctrl+Shift+I) the selection so that only rectangular shapes,constituting the equalizer image were selected. Select blue (80D2FC) as the main color and fill our selection by pressing Ctrl+Backspace. Finally, duplicate this layer and go to Edit > Transform > Rotate 180degrees(Edit > Transform > Rotate 180 degrees) then move the copy as shown below.
Step 3. In the layers panel, select both layers with equalizer and click Ctrl+ Shift+ E to merge them into one. Now let's rotate the resulting layer 90 degrees - go to Edit > Transform > Rotate 90 degrees clockwise(Edit>Transform>Rotate 90 CW). Now copy the layer several times (Ctrl+J) and place the equalizers one below the other. Once done, merge the original layer with all the duplicates.
After making all these adjustments, make a copy of the resulting blue path from the equalizers, we will need it later. Hide it for now.
Step 4. Duplicate this entire track and click Ctrl+ T- we switched to mode Free Transformation. At the top right of the screen you can see the transformation panel. We need to move our row of equalizers to the right - to do this, we increase the number in the X column, click OK - and our track has moved to the right:
Step 5. Interesting move, is not it? Using the same commands, make five identical columns as shown below. Once done, merge it all into one layer.
Step 6. Have you merged all the equalizer layers? Now let's go in Edit > Transform > Perspective(Edit>Transform>Perspective) and drag one of the top edges towards the center. If necessary, make the bottom edges wider. Click OK. We ended up with this path:
Step 7 Add a layer mask. This can be done by clicking on the “Add Vector Mask” icon in the layers panel, or in the menu Layers > Vector Mask > Show All(Layer > Add Layer Mask > Reveal All). Now, using a black brush with soft edges, we will go over the lower part of our “path”.
Step 8 Create a new layer (Ctrl+Shift+N) and with a large white brush, again with soft edges, paint a few white spots on the “path”. Change blending mode(Blend Mode) on Overlap(Overplay) for a subtle lighting effect.
Step 9 Now select your EQ layer and apply the Outer Glow settings for the layer shown below. Now reduce the Opacity of the layer to approximately 50%.
Step 10 Now duplicate your equalizers layer, and move the duplicate below the original. Apply Filter > Blur > Gaussian Blur(Filter > Blur > Gaussian Blur), and then set Blend Mode(Blend Mode)layer on Hard Light(Hard Light) and reduce the Opacity to approximately 30%.
Step 11 Clamping Ctrl and clicking LMB on the mask of the original layer with equalizers, select it. Now, having made the blur layer active, let’s create the same mask on it. To do this, simply click the Vector Mask icon in the layers menu (F7).
Step 12 Now create a new layer at the very top. Select black as the main color and fill this layer by clicking Ctrl+ Backspace. Now go to Filter > Render > Clouds(Filter>Render>Clouds). Put Blend Mode(Blend Mode) layer on Lightening Basics(Color Dodge).
Step 13 Duplicate your clouds layer. We should get a more intense effect. Select your layer with equalizers and instrument Magic wand(Magic Wand Tool) click on the black area. Now invert your selection so that the "path" is selected. Go back to your second cloud layer and press Delete, then reduce the Opacity to 10%. We got some extra fog on the edges of the EQs.
Step 14 Create a new layer. Now select the brush big size with 0% Hardness and 100% Opacity. Choose a light blue color (eg 77D1FF). Make several large spots. Reduce the Opacity of this layer to 30%.
Step 15 Now duplicate your original cloud layer and move it above your big brushes layer. Blend Mode leave Lightening Basics. Now reduce the Opacity of the brushes layer to 20%, and the clouds layer to 45%. We’ll also apply a 200px Gaussian Blur on the layer with the brushes to somewhat “smear” the effect ( Filter > Blur > Gaussian Blur(Filter> Blur> Gaussian Blur)).
Step 16 Now insert a picture of a person in the center of your image. The person is on a white background, so it is very easy to highlight him by clicking Magic Wand on a white background, invert the selection (Ctrl+Shift+I). Copy the person (Ctrl+C), go to our document, paste the person (Ctrl+V). A man should be on the top layer! Now change Blend Mode(Blend Mode) layer on Soft light(Soft Light) and use the tool Eraser(Eraser) to erase his legs, allowing him to subtly blend into the EQ.
Step 17 Now duplicate your person layer and change Blend Mode(Blend Mode) for the duplicate on Normal(Normal). Now, using any method known to you, select the light parts of the photo, in this case the face and shirt. Copy this area to a new layer (Ctrl+J), and copy the previous layer (the whole person and Normal Mode Overlays) hide or delete. Let's return to the light areas - we don't need a tie (it's dark). We delete it Eraser. Be careful not to snag your shirt!
Step 18 Now for the layer with light areas we go to Image > Adjustments > Desaturate(Image> Adjustment> Desaturation). Then, in the same menu, select Color Balance(Color Balance) and apply these settings:
Step 19 Now the fun begins! Remember, I asked you to save one of the paths. We need him now. Move it to the very top and adjust the size so that its height is equal to the height of the person. Reduce the Opacity of the layer a little (to about 80%). Make two copies of this layer and hide.
Return to the original path. Put him right in front of the man, go to Edit > Transform > Warp(Edit>Transform>Warp) and make something like a wave (see the screenshot below). Make one duplicate visible, place it on the left and do the same with it, but on this layer, where there is a narrowing in the center, there should be an expansion. I just can’t imagine how to explain it differently, just look at the screenshot. Having made the first duplicate wavy, move on to the second one and, placing it on the right, make it look like the screenshot below.
Step 20. Now merge all your duplicate EQ layers together, and go to Image>Adjustments>Brightness/Contrast(Image>Adjustment>Brigthness/Contrast) and set your Brightness to -100 and Contrast to +100 to make your image black. We need to add sharpness to the layer, for this we go to Filter > Sharpness > Sharpness+
(Filter> Sharpen> Sharpen More). The edges become sharper and then we use the tool Magic Wand with a tolerance of 50 by clicking somewhere outside of our equalizers.
Now invert the selection (Ctrl+Shift+I) and hide our equalizers layer. We got a selection of all three deformed equalizers. Let's go back to our highlight layer. However, if we now just press Delete, then too much will be removed. Let's take it Eraser(E) with soft edges and Opacity about 20% and carefully remove only those parts that you consider necessary. IMPORTANT: do not overdo your face! Without removing the selection, go to the layer with the black parts and work Eraser there.
From the translator: of course, my role here is not great - I am just a translator. But here's my opinion - the effect on the clothes is not too similar to the one in the video. To achieve the best results, I advise you to use not an equalizer image, but to create some lines yourself and only then, copying them, remove parts of the clothing.
Step 21 Now create a new top layer and use your tool Feather(Pen Tool) to draw a line near your person. Make sure your current brush is 1px in size, 100% hardness, and the foreground color is B6FEFE. After drawing an outline with the Pen, right-click on it and select Stroke a Path(Stroke Path). If your line does not suit you in some way, you can always change its shape using Free Transformation(Ctrl+T). Finally we duplicate this layer and move the duplicate a little lower than the original. I reduce the width of the second layer so that the lines are slightly different from each other.
Step 22 Merge both line layers together and apply Layer Style(Layer Style). In settings Outer Glow We expose what is shown below. Take a small soft one Eraser(E) and erase the edges of the lines a little. Now reduce the Opacity of the layer to 80%.
Step 23 Let's go to Edit > Transform > Scaling(Edit > Transform > Scale) to move our lines a little closer to each other. Now Eraser Let's delete parts of the lines that go in front of the person's feet. Now create a new layer above all the others and use round white brushes. Gradually reduce the Opacity of the brush to create the effect of the edges of the white lines gradually disappearing. Now we just put Blend Mode this layer on Overlap(Overlay), giving the lines a cool lighting effect.
The website presents to users of the electronic portal a seven-band graphic equalizer that is easy to assemble. Externally, the equalizer consists of seven columns (according to the number of bands) of LEDs different color arranged in order of the colors of the rainbow. Each column has 10 LEDs - 10 signal levels.
The schematic diagram of the device is shown above. The audio signal from the output of a music center, computer sound card or smartphone is fed to the input of a specialized MSGEQ7 microcircuit. This integrated circuit from Mixed Signal Integration is a 7-channel spectrum analyzer in a DIP-8 package with a current consumption of 1 mA, and is also a . MSGEQ7 is capable of extracting frequency bands of 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz from the input audio signal:
MSGEQ7 is controlled by two digital inputs Reset (pin 7) and Strobe (pin 4). After the Reset start pulse, it is enough to apply seven strobe pulses to the Strobe line, as a result of which, after each strobe pulse, a voltage proportional to the content of one of the seven frequency bands in the audio signal will appear at the Out output (pin 3).
The output of the MSGEQ7 chip is connected to the input of the LM3915 LED level indicator chip. This microcircuit has ten outputs, the state of which depends on the level of the input signal. The circuit is controlled by an ATMEGA328 microcontroller, I decided to use a ready-made board Arduino Nano. There are many projects on the network that use as many as seven LM3915 cases. I decided to use dynamic display and one LM3915 chip. The microcontroller generates a Reset signal for MSGEQ7 and then issues seven Strobe signals. At the same time, it turns on one of the transistor switches of the columns of our indicator and this column displays the signal level from LM3915, which is connected to the lines of our indicator.
I used seven colors of LEDs (red, orange, yellow, warm white, green, blue and pink-violet) to display all seven frequency bands. Since LEDs different colors different supply voltage, different current and different brightness, in order to get the same luminous flux when operating our screen, I used the ability of the LM3915 chip to set the output current. Each time a column is switched, the microcontroller, depending on the column number, using PWM (PWM) and a simple RC filter, generates a voltage at pins 6 and 7 of the LM3915 corresponding to the required brightness of the column. This solves the problem of uneven brightness different types LEDs. The only thing required for this was to raise the Arduino PWM frequency from the default 500Hz to 64kHz (the first two lines in the setup section of the sketch).
As far as I know, sometimes you come across not very high-quality copies of MSGEQ7. Their output noise characterizes them even with a grounded input. Those. even in the absence of a signal, chaotic emissions will be visible on the screen. Apparently I came across just such a microcircuit. Therefore, I additionally send a signal from the Out output to the ADC of the microcontroller (A7). With a few lines of code, the microcontroller analyzes the input signal and suppresses display noise by simply not turning on the column key.
The sketch for the microcontroller is shown below:
| #define STROBE_PIN 11 // MSGEQ7 PIN 4 #define RESET_PIN 12 // MSGEQ7 PIN 7 #define PWM_PIN 10 // BRIGHTNESS CONTROL #define SOUND_PIN A7 // SIGNAL LEVEL ANALYSIS byte band_pins=(2,3,5,6,7,8,9); // COLUMN PORTS void setup())( void loop() void MSGEQ7())( |
As noted above, I used an Arduino Nano board - the only thing I had to “modify” was to remove the USB power protection diode and replace it with a jumper. The voltage dropped on it and the circuit was unstable. Also for power supply there is an electrolytic capacitor with a capacity of at least 1000 microfarads so that at moments when almost all the LEDs on the screen are lit, the voltage on the USB bus does not drop. It is also worth noting that when powering the circuit from a USB computer, it is better to use a USB hub with external power, this will minimize interference on the USB bus. For equalizer printed circuit board was not developed, the entire structure was assembled on two breadboards. In the video below you can see the equalizer in action.
Schematic diagram of the graphic equalizer and code for the microcontroller are available at
Dynamic equalizers on the rear window are an accessory for party and modern drivers. The devices are effective when used in the dark, when the dynamic diode flow to the beat of club music looks as stylish as possible to others.
Bright and colorful colors, various designs from standard equalizers to amazing masterpieces - this is the modernized appearance of your iron horse. The product is produced in the form flexible diode strip which takes power from cigarette lighter And picks up sound frequencies, providing the dynamics of movement to the beat.
On the page: 30 25 50 75 100
Sorting: Default Name (A -> Z) Name (Z -> A) Price (ascending) Price (descending) Model (A -> Z) Model (Z -> A)
With the help of a stylish equalizer you can change the interior design of your car. The device operates from the network passenger car 12 Volts, connecting to on-board system nutrition. The base of the body is a flexible sticker, inside of which there are multi-colored diodes in the form of a “BodyBuilding” pattern. The device is attached using 3M tape, which allows you to firmly attach the equalizer to the rear window inside the cabin. It can be dismantled at any time. Designed for reusable installation.
The rear window equalizer "BodyBuilding" is sensitive to the rhythms of music, resulting in the production of color... An amazing feature for a spectacular and stunning exterior of the car would be the installation of an equalizer model. This is a diode tuning tool that is sensitive to musical vibrations and is often placed on the rear window. The device with the "Club" picture is available in various sizes
and combinations of colorful colors, which are offered to choose from before purchasing. ..
A sound responsive tool for upgrading and tuning your car is an equalizer with the “Love” logo, which delightfully shimmers to the beat of the music. The device is placed on the rear view glass and connected to the car's power supply, or rather to the cigarette lighter socket. It looks very impressive and colorful, especially in the dark, which will allow you to surprise your friends with the spectacular diode shimmering around you. ..
The color "MusicParty" equalizer is a means of tuning and upgrading the rear view glass of cars with LED products. The equalizer is a flexible neon graphic plate that is sensitive to vibrations in music and sound, and once installed, lights up and moves to the beat. The device is amazing, impressive and eye-catching at night, giving the car a stunning look. It connects to the cigarette lighter and comes with a special unit on which sensitivity to vibrations is adjusted, since the product is not connected to the radio. .. Sensitive to sound vibrations neon ribbon
on the rear glass format of the iron horse is an equalizer. The "Music" devices are distinguished by the beautiful shimmer of diode lamps to the beat of musical accompaniment. The product connects to the cigarette lighter and responds to music, that is, to vibrations, and therefore is not connected to the radio. Looks beautiful and impressive at night. Not only the size is chosen, but also the colors. .. A modern decoration for your car will be the installation of an equalizer, that is, a flexible LED strip, the functionality of which is to sensitivity music waves and ensure the movement of the picture. made in the form of an image of "AK-47". Connects to the cigarette lighter, but does not connect to the radio, since the built-in sensor reacts to the frequency of sound. To adjust the sensitivity, a special unit is supplied. ..
Sensitive diode strip of various volumes and color saturation is the main part of the equalizer, which is offered for installation on the rear glass of cars. The device adds luxury and extravagance to the car when working at night. A sensitive sensor responds to sound vibrations, thereby ensuring that the picture moves to the beat of the music. The connection occurs only to the cigarette lighter, from where the device is powered. ..
This equalizer model with the “Demon” picture will make your car look more impressive. This is a device that is mounted on the rear window. The product is LED strip, which, with the help of a built-in sensor, is able to respond to vibrations in sound frequencies, moving and shimmering in time with them. It is powered by a 12V system and connects to the cigarette lighter. It is worth noting that there is no connection to the radio, thanks to the functionality of the sound vibration sensor. Colors and sizes are selected before making a purchase. ..
The burning and moving “Dragon” to the beat of songs on the rear car window is a diode equalizer, which is spectacular tuning. The device is a flexible tape of various sizes and background colors, which are offered to choose from. It connects to the cigarette lighter, from where it receives power. It is equipped with a special sensor, the function of which is to respond to sound frequencies and provide movement to the picture. The device looks very beautiful at dusk or on a dark night, when the light and every shimmer is visible a hundred times more impressive. ..
The device on the rear window of the car, moving and shimmering with different LED colors, is an exclusive model of an equalizer that has the Zenit logo. The device connects to the cigarette lighter, thereby receiving power from it, and has a unit that responds to vibrations and frequencies of music, so there is no need to connect it to the radio. The device is effective when placed on a car and has different dimensions. ..
A diode flexible tape with a sensor sensitive to sound frequencies is an equalizer, which is mounted on the rear glass of the car. The device connects to the power supply of the cigarette lighter and provides an excellent and impressive appearance of the car, especially at night, when light reflections and movement are noticeable a hundred times more. The operation of the device is that the response sensor detects sound vibrations and ensures that the equalizer picture moves in time. The background can be of a uniform or multi-colored type, and the tape is also available in different sizes. ..
The equalizer is mounted on rear-format machine glass. The product is an element of perfect car tuning and decoration, especially at night. This is a multi-colored diode tape that reacts to the frequencies of sound vibrations and begins to move and shimmer in time. A Celtic pattern to the beat of a song is stylish, extraordinary, interesting and even mysterious. The device itself is powered from the cigarette lighter, and the sensor responds to sound, so there is no need to connect the graphic tape to the radio. ..
Dragon wings on the rear window of a car can appear with the installation of a flexible graphic diode product called an equalizer. The device has the ability to respond to sound vibrations of sound frequencies, moving in time with them and providing a stylish and interesting shimmer of colors and movement of the picture. It takes power from the cigarette lighter, and the unit on the tape is sensitive to sound, that is, there is no connection to the radio. Set to 12V power supply. Comes in different sizes and colors to choose from. ..
Interesting model equalizer, which is mounted on the rear glass, and is powered from the cigarette lighter, connecting to it with a special connector. The assortment includes graphic sound tapes of different sizes and background colors, which can be selected before purchasing. This model is distinguished by a sensitive sensor to sound, which makes it possible to activate movement and the shimmer of colors in time with the sound equipment of the cabin. It looks very unusual and impressive, especially for night street parties. ..
A beautiful and stylish appearance that delights and surprises will be given by LED products called equalizers. This model is not just a standard equalizer, but a work of art, as it is characterized by an interesting picture “A winged heart and stars”. The device takes energy from the cigarette lighter and, capturing sound frequencies, thanks to the sensor, provides movement and shimmering colors to the beat, which looks impressive at night. ..
Moving "Winged Heart" and shimmering with different color schemes to the beat of your car music - this is a well-made equalizer. The device is very impressive and original; it connects to the cigarette lighter, receiving power from it. Sound vibrations are captured by a sensor, which ensures the movement of the picture. Developed in different sizes and comes out under different background colors. ..
An exclusive and interesting equalizer with a picture of “Rastafari” is now offered for installation on your car. It is attached to the rear window and is powered by the cigarette lighter. It is characterized not only by bright LED colors, but also by different sizes, which you select personally. Movement in time and color shifting occurs thanks to the functionality of the built-in sensor, which picks up sound vibrations and makes the picture light up and move. ..
An extraordinary equalizer with the picture “Child in the car” is stylish and interesting. The device is a diode strip that is connected to the cigarette lighter power supply and has a special sensor that reacts to the appearance of vibrations and waves of sound, causing it to light up and move in time with the picture. Produced under different overall volumes from small to volume covering the entire rear window. Also chosen at your discretion and color. ..
An interesting graphic equalizer model - “Russia Forward”, for true patriots. This is a device that is placed on the rear glass and provides colors and movement to your music. The connection takes place to the cigarette lighter, and thanks to the sensor, which responds to music vibrations, the device does not need to be connected to audio equipment. Before purchasing, you must select the dimensions and desired color. ..
For true connoisseurs of Spartak, we offer installation of an equalizer model on the rear window, which moves to the beat of the music, effectively shimmering with colors. The connection is made to the cigarette lighter, and the sensor built into the diode strip, catching sharp or smooth vibrations of the music, makes the picture move beautifully. Available in different volumetric dimensions and colors. ..
An equalizer with the "Spectrum" picture is the best car tuning. This is a device that is constructed of a graphic and flexible diode strip with a sensor that captures sound vibrations and makes the image move to the music. The maximum effect from the play of various colors is ensured at night. Connects to a cigarette lighter with 12V power. ..
Extravagant and stylish model equalizer, equipped with a graphic "Speedometer" with distinctive background releases and overall volumes of the diode strip. It is connected to the cigarette lighter, and the sound waves are captured by the unit, that is, by the sensor. It is very impressive at night, and is the best tuning device for holding night parties with friends, accompanied by entertaining and loud music. ..
Equalizer "USSR" is a modern and innovative LED car tuning. The decorative device is mounted on the back car glass and is powered from the cigarette lighter, thanks to a special connector. The device is equipped with a block that responds to wave vibrations of sound, so there is no need to connect the device to the radio. Movement and glow to the beat in the darkness of the night looks incredibly impressive, charging with positivity and drive. ..
Patriots of their state can now arm themselves with an interesting diode car tuning device with a picture in the form of the Russian Flag. This device is called an equalizer and is placed on the rear view glass, which provides a spectacular and luxurious view at night. The product glows and moves to the rhythm of the song. The connection occurs only with the cigarette lighter; there is no need to connect anything to the radio, since the flexible graphic tape has a sensor that picks up sound vibrations, which guarantees movement to the beat of the music. ..
A graphic plate with the image of the CSKA logo, dynamically changing position to the rhythm of the music, is an equalizer that is placed on the rear windshield. The flexible panel is available in different sizes and colors, which is selected before purchase. The equalizer is activated thanks to a sensor that is built into the tape and detects sound vibrations. For power supply it is connected to the cigarette lighter. Provides a spectacular, interesting and unusual external appearance of the car. ..
An equalizer is a tool for tuning the transformation of a car. Such a device is a graphic LED plate that is mounted on the rear window glass and has maximum effect at dusk. The image of this model is a skull that moves to a musical rhythm, due to a block or sensor that responds to sound frequency vibrations. It is powered by a cigarette lighter, and the sensitivity of the speaker is adjusted by a special unit. ..
A spectacular and extravagant equalizer is the image of a black angel on the rear window of your car. A diode plate with an audio frequency vibration sensor is powered from the cigarette lighter, connecting to it thanks to a special connector. The device provides a stylish and excellent effect at night, so after installing the product, you can safely gather your friends and have rich, fun and colorful parties. ..
A solid, stylish and powerful equalizer with a graphic image of “Energy”. The device will become a delightful highlight of your car, as it has an incredible effect at night. An equalizer is a diode plate of various colors and distinctive dimensions (selected before purchase), which is mounted on the rear transport window. Changing the image to match the musical accompaniment is ensured by a sensor whose functionality is to capture sound vibrations. ..
A classic equalizer for your car is a delightful clubber's look. The device moves to the beat of music and provides a stylish and most effective look at night. It is placed on the car window for rear view and connects to the cigarette lighter, powered by it. There is no need to conduct wiring to the radio, because thanks to the sound response sensor, the image itself begins to move. The sensitivity of the sensor is regulated by a special unit or remote control. Available in different volumes and colors, which are selected by you personally. ..
The best modernization of a BMW car will be the installation of a graphic LED plate that responds to music, called an equalizer. This model has the company’s signature badge, which moves when heard and shimmers very effectively. The devices are placed on the rear view glass only. It is connected to the cigarette lighter, but nothing is connected to the radio, since the sensor, the sensitivity of which can be adjusted, picks up sound vibrations and causes the image to change dynamically. ..
