Many people very often think about how great it would be to at least try to create their own motorcycle with their own hands, without resorting to the services of salons, craftsmen, etc. However, often such a desire remains unfulfilled due to the motorcycle enthusiast’s uncertainty about the success of his planned project. That’s why it’s worth figuring out how to make a motorcycle without anyone’s help.

Preparing to assemble the motorcycle

First, you need, of course, to decide what configuration the future “steel horse” will have, and also to resolve the issue of all the parts and tools necessary for the work. If you have some experience, some elements can be made independently, for example, on milling and lathe machines or by welding.

If during the assembly process the base is an old motorcycle, then you should not start work with the installation of small parts, cardans, brake rods, etc. The best solution will begin to putty and paint the tanks and wings. To avoid problems with the motor or parts of the gearbox bridge, they need to be placed in kerosene for a while. A homemade motorcycle will look much more expressive and impressive if its engine crankcases, covers, gearboxes and ignitions are well polished.

The engine of the old device needs to be completely rebuilt, and only then begin installing accessories, which, as a rule, include two main materials: leather and chrome.

Bicycle as a basis for a motorcycle

It's no secret that often the basis for a motorcycle is just a bicycle, which is equipped with everything necessary equipment. When thinking about how to make a motorcycle out of a bicycle, it is important to understand exactly what materials should be used, as well as to know their technical characteristics.

Quite often you can find this option when the motor is from a chainsaw. In this case, it is also worth studying its power, weight and size in detail.

Possible list of materials for creating a motorcycle from a bicycle

So, turning a bicycle into a homemade motorcycle, the most common option for a set of parts is the following:

• engine;
• pulleys;
• drive belt and tension roller;
• fasteners.

One way or another, making a motorcycle from a bicycle is far from a cheap pleasure, so sometimes it’s better to think about whether it would be advisable to do this or whether it’s better to buy a new moped or at least a ready-made bicycle motor.

DIY motocross motorcycle

Despite the highest technical indicators such as a cross bike, it is quite possible to assemble it yourself. Of course, nothing prevents you from just buying already finished model, however, factory samples are not always able to satisfy all the desires of a particular motorbike enthusiast; moreover, such a purchase will certainly not be cheap, and a homemade motorcycle will save a significant amount of financial resources. However, here it is necessary to strictly comply with all installation requirements, otherwise the end result may be very disappointing.

The procedure for self-assembly of a motocross motorcycle

It would be best to start assembly with wheels, which can be freely purchased at any motorcycle parts store. There are two most common options for attaching these elements: purchase a rim and replace the spokes, or simply install cast sports wheels on the device.

The fork should be classic and have a full range of adjustments. The optimal size for it would be 43 mm.

In order to increase the reliability of the brake system, it is necessary to increase their power. Alternatively, sometimes the diameter of the brake disc is simply increased.

Particular attention should be paid to the suspension, which is mounted on a homemade motocross motorcycle. The most suitable for it will be stock shock absorbers, which can be ordered directly from the manufacturer, but it is important to indicate the possible weight of the device so that the suspension elements are equipped with the appropriate springs.

If we talk about the engine, it is definitely worth mentioning that its thrust can be increased by reducing intake losses. To ensure this, standard filter from paper in the old engine is replaced with foam rubber, after which updated motor installed in the system of a future motocross motorcycle. In addition, the carburetor is also subject to changes, which should provide Good work engine at maximum speed.

How to make an all-terrain vehicle from a motorcycle?

Recently, all-terrain vehicle designs that are made from regular motorcycles. In addition to the entertainment functions that such a device carries, it is also a very reliable means of transportation.

Thus, motorcycles can be divided into several categories, the main of which are, naturally, ATVs. These transport models amazingly combine the mobility of a motorcycle and the stability inherent in cars. Due to the fact that each of the ATV wheels has its own suspension, the device is able to overcome almost any, even the steepest, road irregularities.

The third type of all-terrain vehicle from a motorcycle is a vehicle equipped with tracks, with the help of which you can easily move through swampy areas.

However, we should not forget that any, even a homemade motorcycle, is a vehicle characterized cross-country ability. Therefore, in order to achieve the maximum value of this parameter, it will be enough to simply increase the cross-country ability of a standard vehicle, and the need for global modernization will disappear by itself.

Owning an expensive and stylish bike is the dream of the vast majority of motorcyclists. What is noteworthy is that the desire to arouse the envious gaze of other road users is typical not only of green youths, but also of fully mature road wolves.

On the way to the unconditional uniqueness of their two-wheeled friend, motorcycle owners resort to a variety of tricks, ranging from unusual and radical color solutions, ending with a radical restyling of the bike. For some this is quite enough, but for some maximalists it is not. As a result, homemade motorcycles appear on the roads, which have no analogues in principle.

Homemade motorcycles in Russia

Homemade bikes are popular all over the world, but they are especially common in countries where the market offers relatively meager the lineup motorcycles. Russia can be called one of such countries - for many years the choice of the domestic bike fan was limited to 5-6 options.

This factor, superimposed on historical ingenuity and ingenuity, led to the emergence of a huge number of homemade motorcycles created by one’s own hands. Almost all Soviet-Russian bikes, both light small-cubic and heavy multi-cubic ones, still fall under the radical upgrade of motor-kulibin bikes.

From lightweight ones, due to their high availability, amateur engineers prefer to create homemade products from Minsk motorcycles. The bike is a kind of construction kit for a novice inventor. Of the more serious ones, homemade products based on a motorcycle are popular and are especially famous for their high-revving engines with high resistance to wear, for which, in fact, they have earned the respect of motorcycle mechanics.

But the most shocking and original are homemade products based on Ural motorcycles. From bulky Soviet laborers, Russian amateur motorcycle makers create presentable, imposing choppers that can easily compete with expensive American Harley Davidsons.

How to make a motorcycle with your own hands

The process of creating a bike yourself, like most engineering structures, begins with the development of a project. At the stage of sketching the drawings of a homemade motorcycle, it is necessary to clearly determine whether the two-wheeled friend will be exclusively a garage showpiece or an original, but everyday means of transportation.

Most often, motorcycle engineers are inclined to the second, therefore, it is preferable to develop a future bike based on an existing two-wheeler with a legal registration certificate. This decision is explained unnecessary to receive additional permits and licenses for the vehicle being created.

The next step in creating a motorcycle with your own hands is to create a list necessary spare parts according to the design part. In addition to the main parts and components of the bike, you need to take care of special tools and consumables. Important point: It is strongly recommended to purchase products from one trademark, as this will greatly facilitate the upcoming assembly and fitting process.

Testing a homemade motorcycle

Checking the functionality and quality of assembly must be carried out at the stage of readiness of each individual component of the bike, and it is important to strictly observe safety precautions. For convenience and compliance with the installation sequence, experts advise recording all work on a homemade motorcycle in a photo. At the stage of 99 percent readiness, it is recommended to test a homemade motorcycle at the stand of a specialized service station.

Building a homemade motorcycle with your own hands: photo and description of the work done.

In general, the start of work on the motorcycle was November 2014 in Krasnodar. it all started with a proposal to bring a Ural motorcycle from the village and slightly modernize it for ourselves.

The rear swingarm was bored out to accommodate the Audi Q7 wheel by 20 inches. The question arose of connecting the wheel to the gearbox: chain, cardan, adapter? Everything is wrong - the wheel is too wide. As a result, the drive from Oka's car was taken. We made flanges for joining the box, drive and wheel. With minimal gaps, of course, but everything worked out. We made a hub to connect the axle and the wheel.

A successful test proved the functionality of the design. This process took at least 4 months.

Initially they wanted to make the front fork like on a chopper - recumbent, having digested the glass. There was a test ride for the first time, which showed that the fork shock absorbers were not working. The feathers made for the extended fork were also bent. To solve the problem, we reduced the angle of attack of the fork by turning out a new steering tube.

Made from 2 mm steel rear wing, the front one was later abandoned altogether - it spoiled appearance. The saddle was also forged from 2 mm steel, upholstered and covered with leather. They made footrests, moved the gear shift and brake to them, and placed running lights there.

Rear brake - hydraulics: clutch master and slave cylinders from VAZ 2107. Front brake: two-disc hydraulic brake from Yamaha R1 4-piston. To install them, the hub had to be re-made. But the new hub no longer fit into the original fork, so it had to be expanded by making new yokes.

The tank and steering wheel remain unchanged. Built into traverses warning lamps. They initially planned to make the headlight unique, so they didn’t redo anything, but took high beam from a VAZ 2107 and a body has already been made for it. The engine was switched to 1 carburetor from the Oka, and an intake manifold was made.

Protective shields were made under the seat, where all the wiring was placed. The rear stops and turn signals are made from super bright LEDs. The motorcycle is painted in Rhapsody color. In total, taking into account improvements and alterations, the motorcycle took 2.5 years. The motorcycle is named “Monster”.

IN modern world There are a considerable number of creative people who are able to turn even the oldest things into something original and interesting. Many people who are not indifferent to motorcycles do not have the opportunity to buy a motorcycle for some reason. There is a way out for them - to assemble the bike with their own hands.

Not every person can assemble a motorcycle on their own. This requires a lot of time and patience. You need to use all your love for bikes as inspiration. Thanks to this, it will be possible to assemble a very good vehicle at home, which in any case will be unique.

You need to be prepared that when creating a motorcycle with your own hands, a large number of difficulties may arise. It’s not uncommon for designers to make non-standard decisions. For beginners building their own motorcycles, it is best to start by assembling the simplest models.

All homemade motorcycles are unique. Not many bike lovers know how to make a motorcycle with their own hands. This requires a lot of effort. Without knowledge of the design of each model of motorcycle equipment and without necessary materials impossible to get by.

In any case, when creating homemade motorcycles, the ideas of craftsmen who have long developed original models of motorcycles for various manufacturers are taken as a basis.

Homemade motorcycles are designs that, in all their functional qualities, do not differ from the motorcycles offered by manufacturers. For them, amateur designers use spare parts and parts from various types motorcycle equipment. Each creator of a homemade motorcycle has the opportunity to develop for himself a bike that will meet all his requirements.

Homemade motorcycles technical specifications may be different. They can be whatever is necessary for any motorcyclist. In most cases, amateur designers create sports motorcycles, motorcycles for traveling on roads. Moreover, the latter can be equipped with elements of sport bikes.

Steps on how to make a motorcycle yourself

There are several stages in creating a motorcycle with your own hands:

Choosing a homemade motorcycle model

Before starting work, everyone who is going to assemble any thing should have an idea in their head. It is fundamental in order to truly create good thing. It is very important to imagine the design and that's it technical features of your future creation.

Drawing of a future motorcycle

Any master does not necessarily need to have the skills of an artist in order to draw his future creation. It is very important to indicate on a piece of paper those features of your motorcycle that are worth paying attention to.

Important: It is necessary that everyone who makes a motorcycle with their own hands has a visual image of the future masterpiece.

Purchasing parts to create your own motorcycle

At this stage you will have to spend a little of your money. To create a motorcycle with your own hands, you need to purchase a large number of elements, including an engine, wheels, frame, and various metal pipes.

Assembly

On final stage you need to put all the parts together to get a homemade vehicle. To do this, it is very important to have knowledge of how all the components and systems of motorcycle equipment work.

Homemade motorcycles video