Hazard alarms are used when the car is damaged in an accident, or if it is necessary to stop at a place where the car poses a danger to other vehicles. If it is possible to move at low speed, you can move onto right lane and continue driving with the emergency lights on.

Moreover, there is an exception to the last rule. If the car cannot accelerate to 40 km/h , That on the road the movement cannot be continued. In this case, they pull over to the side of the road and stop (by putting up a stop sign and also turning on the hazard lights).

Actually, the cases in which the emergency alarm really needs to be turned on were listed above. We’ll also add here towing and getting children in and out (when the vehicle is equipped with a “Children” sign). And in any other situation (for example, when stopping at an intersection), turning on the hazard warning lights is extremely undesirable. This will distract other road users from the road.

The following misconception is common. It seems that on some foreign cars the hazard lights turn on automatically, and when braking(but, unlike “stops”, not when the pedal is accidentally pressed). Let us explain what exactly is actually happening.

“Hazard light” - does not duplicate the brake light

There is the following option option. When the car performs emergency braking and moves slowly, the emergency lights come on. But they blink with frequency two times faster, than in emergency mode(such a signal cannot be confused with an “emergency” signal).

This option is available on luxury trim levels. passenger cars, and it became widespread in some countries of northern Europe. IN Russian Rules, however, nothing of the kind is considered. If the signal from the deceleration sensor can be used, then it makes sense to connect it to additional brake light(and not to the emergency lights).

A common mistake is the following behavior on the road. After stopping, the driver installs a special sign, as prescribed in the traffic rules. But the hazard lights remain off. What violates Art. 12 clause 20 of the Administrative Code.

The emergency housing and communal services service is designed to provide trouble-free and uninterrupted operation all kinds of housing and communal facilities (electricity networks, water supply, gas networks, sewerage, and so on).

Among the tasks that the “emergency crew” performs are the organization and implementation of various activities to ensure the uninterrupted functioning of housing and communal services facilities, as well as the localization and elimination of problems and accidents that arise on them. The emergency service dispatcher coordinates and controls the activities of its various departments, accepts requests to eliminate accidents and manages operational teams, coordinates the actions of emergency rescue teams with housing and other organizations.

Areas of responsibility of various services

The emergency service usually deals with all sorts of breakdowns and problems caused by equipment wear, capital or current repairs communications, unsatisfactory maintenance of the house as a whole and its utility networks, as well as the impact of abnormal weather events (too severe frost, rain, wind and so on).

Thus, the emergency service is called in the event of: – damage to pipelines various systems engineering equipment (this applies to both the water utility and the gas network), which disrupt the functioning of these systems and cause damage to residential and auxiliary premises - that is, bursts of pipes of all kinds due to old age or mechanical damage; – failure of the fittings of these systems (shut-off, control, water supply) – broken or leaking taps and similar problems; – clogged sewers and garbage chutes;

- water entering the premises - leaks, pipe breaks;

— failure of electrical equipment: input distribution devices, electrical cables (break or damage), power outage in an apartment, entrance, building.

Employees of the city emergency service, after arriving at the scene and assessing the situation, can also call other repair special services (if, for example, the gas or telephone network is damaged, the elevator does not work), contact the city water utility and other specialized utility companies. In houses managed through an HOA, the partnership is responsible for combating accidents. The city (district, etc.) emergency service, in cooperation with utility companies, is required to deal with “street” and “yard” accidents.

Cost of work

Emergency rescue services are obliged to urgently ensure liquidation emergency situation, ensure the safety of citizens (including by fencing hazardous areas and even taking measures to resettle people from emergency housing). In this case, the departure of the team must occur within half an hour from the moment it is called by the dispatcher or citizens (in the latter case, the repairmen themselves notify the control room about the departure).

When performing work, emergency crews are required to monitor their safety for people, their property and environment, monitor compliance with occupational safety and health requirements. They must also take measures to prevent a recurrence of the emergency in this area.

In case of detection of damage (accidents) on the main water supply, heat supply, sewerage, telephone, underground power or network networks, as well as gas pipelines and gas equipment, input cabinets and transformer substations, service employees not only report this to the emergency services of the relevant utility companies, but monitor their work until the accident is completely eliminated.

Almost all utility emergencies should be repaired free of charge. Exceptions are intra-apartment accidents among homeowners and sometimes – intra-house accidents at facilities with a form of direct management.

Accident Elimination Standards

For each type of work there are certain regulations, stipulating the order of their implementation, as well as the time within which the liquidation of the accident should be completed. The repair team reports to the control room about its arrival at the scene of the incident, and then about the completion of the work (all this is recorded in special logs).

So, only two hours are given for the following types of work: cleaning the sunbed or riser; replacing a valve or tap with cold or hot water; faucet replacement; eliminating leaks from plumbing equipment (without replacing it) or the riser (without replacing its sections); eliminating water leaks in stairwells or garbage chutes; pumping water from the basement; troubleshooting electrical networks, devices and devices.

In 4 hours, the team must cope with: replacing a section of a riser or pump, radiator or heated towel rail; installation of squeegees, insertion of plug valves in the heating riser; eliminating a leak from a cold water supply pipe (without replacing its section); welding works.

6 hours are provided for eliminating a leak from a hot water supply pipeline, also without replacing its section;

The emergency team can work for up to 8 hours to replace sections of pipelines and replace valves.

Of course, the standards depend on the scale of the problem: up to one day of light is allocated for improvement problems (replacing a light bulb in a lantern, a stolen or damaged manhole cover, eliminating a dead tree) or accidents that leave one or more houses without electricity.

Elimination of breaks in the largest main communications can take up to 3 days, and correction of damage from natural disaster- even longer.

7.1. The hazard warning lights must be turned on:

• when forced to stop in places where stopping is prohibited;
• when the driver is blinded by headlights;
• when towing (on a towed motor vehicle);
• when boarding children in a vehicle that has identification marks“Transportation of children” (hereinafter identification marks are indicated in accordance with the Basic Provisions), and disembarkation from it.

The driver must turn on the hazard warning lights in other cases to warn road users of the danger that the vehicle may pose.

Light alarm is activated by a special button with a symbol in the form of a triangle. When the hazard warning lights are turned on, all direction indicator lights begin to work (blink) simultaneously.

In the cases listed above, turning on the hazard warning light is mandatory, but the driver can use it in other situations that he considers dangerous, i.e. These situations are determined by the driver himself. For example, if you see an accident ahead, you can turn it on in advance to warn drivers who are driving behind - for them it will be a warning signal that something is wrong ahead.

When someone in reverse leaves the parking lot, he may not be able to see the situation on the right side of the road behind him. You can stop in front of the person leaving, as if blocking the road for others in the outer lane, and turn on the hazard warning lights. Those driving behind will pay attention to the situation, and the driver leaving will be able to calmly and safely leave the parking lot. As a sign of gratitude, he can “blink” the emergency lights a couple of times - this is one andh on road. Alternatively, you can move in later to the vacant space.

7.2. When stopping vehicle and the activation of the alarm, as well as in the event of its malfunction or absence of a sign emergency stop must be immediately displayed:

• in case of a traffic accident;
• when forced to stop in places where it is prohibited, and where, taking into account visibility conditions, the vehicle cannot be noticed in a timely manner by other drivers.

This sign is installed at a distance that provides timely warning to other drivers of the danger in a particular situation. However, this distance must be at least 15 m from the vehicle in populated areas and 30 m outside populated areas.

The warning triangle is an equilateral triangle with a red reflective border (outside) and an orange border (inside). It is advisable that it be on a stable stand, so that it does not have to be “fenced” with anything later.

In the cases listed in paragraph 7.2, the warning triangle must be displayed not only when the alarm system is faulty or absent, but also when it is turned on (working).

7.3. If there is no or faulty hazard warning light on a towed motor vehicle, a warning triangle must be attached to its rear part.

During this time, the hazard warning lights must be turned on only on the towed vehicle. But it may happen that, for various reasons, it will be impossible to turn on the alarm on it (does not work,). Therefore, you need to take care of where in the back of the car you will have to attach the warning triangle.

In some cases, a vehicle stopped on the road can pose a danger to other drivers. To identify such vehicles, the rules provide for the inclusion of hazard warning lights and the installation of a warning triangle. Data warning signals help other drivers timely notice a stopped vehicle and take action necessary measures precautions.Drivers are required to turn on their hazard warning lights and display a warning triangle:
1.In case of a traffic accident
2. In case of a forced stop where, taking into account the rules, it is prohibited

A warning triangle is installed in such a way that the vehicle is noticed in a timely manner by other road users. The distance must be at least 15 meters in a populated area, and at least 30 meters outside a populated area. Placing the sign at a greater distance is selected by the driver depending on the specific situation.

Emergency light alarm must be included:
1.If the driver is blinded by headlights
2.When towing (on a towed vehicle)

If there is no or malfunction of the hazard warning lights on the towed vehicle, a warning triangle must be attached to its rear part.
The rules provide for the inclusion of hazard warning lights in other cases, to warn other road users about the danger that the vehicle may create.

Today, everyone without exception is equipped with hazard warning lights (ALS). modern cars. Its purpose is to warn other motorists about a vehicle malfunction, thus marking it on the road. In what cases is the alarm button used and how this system works - read below.

When your security alarm goes off in the middle of a quiet night, you will be terrified at the thought that an intruder has entered your premises. However, when it happens for no particular reason, it can irritate not only the people in your home, but also in your neighborhood. False alarms such as this can waste valuable time for police authorities when they respond to them. Moreover, it may pose a security risk because people may not perceive serious alarm in the event of a real threat.

Most often, false alarms are caused by human error. In fact, statistics show that 80% of them are caused by users. Someone in the household may have entered the wrong password. Another mistake is accidentally opening a window or door after the alarm has been armed.

When are you required by law to turn on your hazard lights?

Any driver must press the vehicle's hazard warning light button and activate ACC in several cases:

1. If the driver had to stop right in the middle of the road while driving. The need to stop may be due to a breakdown of the vehicle or poor health of the driver. In this case, it is necessary to activate the hazard warning switch until the car comes to a complete stop, otherwise an accident may occur.
2. When a car is stopped by a traffic police officer or the driver is blinded by an oncoming vehicle.
3. When a driver operates a vehicle with defects that could lead to an accident. Please note that in this case, operation of the vehicle is permitted unless prohibited by current traffic regulations.
4. If the vehicle is being towed by another vehicle, the hazard lights should always be switched on, as this will alert other road users.
5. In the event that you are transporting children in a car, the corresponding sign is installed on the car, and you are disembarking or picking them up.
6. When cars are moving in a convoy, but one of the vehicles is forced to stop. Moreover, if the hazard warning lights are turned on on one car, other drivers are also required to turn them on.
7. Naturally, the emergency lights must be turned on if the car is involved in an accident.

All these situations are regulated by rules traffic. But there are other cases when activating ACC alone is not enough and the motorist needs to place an appropriate warning triangle on the road. If this sign is not there, it can be replaced with a red light, and this light source should blink similar to an emergency light. The installation of this sign or lantern is placed at a distance of no more than 20 m from the vehicle if the stop was made in a populated area.

When do the hazard warning lights turn on?

To prevent this from happening again, everyone who has access to household, must know how to use the security system. These include, in particular, its residents and domestic helpers. They must know alarm codes, the process of arming and disarming the alarm system, and canceling incorrect alarm activations.

Most systems provide a clear warning that the batteries are low, even if the system is not installed. Others may produce false alarms until the batteries are replaced. When your security system shows this sign, it needs new batteries. Therefore, before arming your system, you will need to replace the old batteries or contact your security provider to do this for you. In addition, new wireless devices can last up to 2-5 years and will start reporting low batteries when they start to fail.

If the problem has overtaken you outside the city, then the sign should be installed at a distance of no closer than 40 meters, and this can be done in the following cases:

1. If the car is involved in an accident. If this happens, then you need to take into account that the machine can not only be a hindrance to other machines, but also affect their safety. Accordingly, the further away you place the sign, the more time the driver of the other car will have to assess the situation on the road and perform the correct maneuver.
2. Another case is if you had to stop where there is bad or limited visibility. In such situations, the sign must be placed no closer than one hundred meters from the vehicle, both in front and behind.

ACC device

The first ACCs have been installed on cars for quite some time. And even if the old cars were primitive in terms of technical solutions And design features, the developers always thought about security.

Dogs and cats can easily trigger sensitive motion sensors designed to target burglars and intruders. As a solution, these sensors can be placed high enough so that they do not reach. On the other hand, homeowners can change the system to something that is not caused by pet movements. Another option is to change the sensors to your favorite tolerant types, where they will ignore animals up to 18 kg.

Air safety systems that use ultrasonic motion sensors can be installed even with the slightest draft of air. To ensure they do not give false alarms, any detectors should be located away from windows, electric fans and vents, or heat sources.

The simple emergency gang itself includes the following components:

1. Emergency button. This element is designed to activate the alarm and is usually located under the steering wheel of the car or on the center console.
2. A special bimetallic interrupting device that ensures that the headlight bulbs operate at a certain frequency. That is, this element provides the blinking effect.
3. Optics, that is, turn signals. They are the ones who carry out the option of sending the signals themselves (the author of the video is the Avtoelektika HF channel).

How does the alarm circuit work?

Most systems have at least some contacts on the windows and doors. When the system is armed and a door or window opens, it triggers an alarm. However, when it sounds without any opening, the contacts are either loose or faulty. Therefore, they must be checked by a specialist. All contacts must be sealed to prevent water ingress.

If homeowners are experiencing more false alarms, their system may not be installed or maintained correctly. Important Tips to prevent false alarms. Choose a security system that best suits your needs and ensures it is properly maintained.

More modern options ACCs are additionally equipped with safety elements, and each size can have its own relay. From the point of view of progress, this option is more advanced.

Emergency gang diagram

If you are faced with the problem of a faulty emergency light, then before you remove the button and repair it, let's look at the connection diagram. The diagram itself may vary depending on the car.

What does the hazard warning button hide?

Homeowners should choose an alarm system that will take into account the movements of those living in the home, including their pets where necessary. Residents must be familiar with the work. Once the system is installed, everyone who has access to the home should know how to operate the system. They should also know everything important codes for arming and disarming the system, as well as correct use alarm clocks.

To ensure the system is working properly, the alarm should be tested once a year and twice a year for police monitored alarms. False alarms can be problematic, but in most cases they can be prevented. They can be avoided by knowing everything possible reasons and be aware of your security system.

So, how does the ACC power circuit function if it is started from a button:

1. Voltage is always supplied to the unit from the battery.
2. Then, through a specially designated safety element current is transferred to the switch.
3. When the hazard warning button is pressed, the switch itself is connected to the unit. Accordingly, this leads to the fact that the current flows back to the fuse block, from where it flows to the turn signal relay, as a result of which the latter blink.

Photo gallery “Main components of ACC”

This scheme reduced crime rates by 75%. Did you know you can save money on your insurance premium with the right safety equipment? When logging in for the first time, it is important to evaluate the security of your new home and change the locks as soon as possible.

Just think: are you sure that the previous owner or tenant gave all his copies or didn't leave it with a neighbor? It's good practice to make sure you leave everything in order before you go on vacation. Simple things like milk bottles left on a doorstep or post, left on a pile, can put your home at higher risk of being burglarized, showing these "tell-tale" signs of an empty home to any potential burglar. By canceling any deliveries and regularly having a buddy pick up your mail, you can mitigate any such risk.

Common emergency signal malfunctions

For what reasons does the emergency light not work and how to solve the problem:

1. The fuse or relay has failed. This problem is one of the most common; it can be easily solved by replacing failed components.
2. Problems in the electrical circuit itself. Anything can happen here - a short circuit, a break in the wiring, and bad contact caused by oxidation. In any case, such a malfunction can be diagnosed using a multimeter or by an experienced electrician.
3. Stopped. This scenario is less likely, but nevertheless cannot be ruled out.
4. Failure of the button itself, in particular its mechanical damage. It is possible that the button has stopped working as a result of wear and tear on the plastic clips installed inside. If the ACC button is inoperative, it will most likely be possible to turn it on, only the key itself will not work correctly. In this case, it will need to be removed and replaced.

Video “The principle of operation of the emergency signal”

The video below provides an overview of the device, as well as the principle of the car (the author of the video is the Autoelectrics HF channel).

Additionally, by investing in a home alarm clock or increasing the security of your doors, you reduce the risk of your home being burglarized. What security measures should I take if I am robbed? Having your home burglarized is one of the most unpleasant experiences anyone can go through. This can leave you feeling vulnerable in a place where you should feel safe. complete safety. Whether you were on vacation or asleep during the burglary, the results of this common crime are equally traumatizing.

After a home burglary or even an attempted burglary, it is important to be proactive to prevent something similar from happening again. Whether you upgrade your cylinders or invest in a home alarm, updating and improving your security can provide you with much-needed peace of mind while also deterring thieves from targeting your home. For getting additional information visit our. Were you robbed?

› Rules for "blinking" headlights and emergency lights on the roads!

ABC of blinking headlights on the road/Know the multiplication table!

IMPORTANT! = Compliance with traffic rules (changing lanes, turning, observing lighting at night, speed limits, etc., etc.)

Photo gallery “Main components of ACC”

Crime statistics show that burglaries increase by up to 20% as the hours go back and the nights drag on as thieves take advantage of the darker evenings. Investing in burglar alarm, improving your door security and being more mindful of your personal safety are all ways to keep you safe when entering the night. However, we would advise leaving some products to the professionals. Any product that requires professional installation will be recommended as such on.

0! Turning on the emergency lights for 1-2 seconds - “THANK YOU” or “SORRY” (there is an option with turn signals - “left” - “right”, “left” - “right”, if the emergency lights are located inconveniently). It would be advisable to respond in kind as a sign of gratitude. There is no such thing as too much politeness)
If the emergency lights are turned on for a long time, then this car has an emergency situation (something is faulty, the driver is blinded, has a headache, stomach ache, etc.).

They are often locked in three places and feature rollers to provide a tight, airtight seal, making it a more efficient and secure locking solution. How do I know if my multipoint interlock needs replacing? It's important to recognize the common warning signs that your multi-point lock is out and know when it will need replacing. This way you will avoid being locked out or leaving your home thanks to a broken lock! Check our to see if your multi-point lock is enabled!

For more information please visit, or for assistance with fittings. It is not always necessary to replace the entire lock. For more information, please visit. Why mine door knob going down too much? Is your home security at risk?

1. Two short high beam: there is a traffic police ambush ahead, or some kind of danger (a windbreak, an accident, etc. Another option is “caution, accident” - there are 3 long signals in the distance) /the response of gratitude is a raise of the hand/. At night, another meaning is possible - “TURN OFF THE HIGH BEAM!”

2. One long distant:
- in the back: “MAKE WAY!” A similar meaning is a series of short ones in the back;
- in the face or to the side: “PASS!” Can be combined with a long and angry beep.

Why is my door so difficult to open? This may be a sign that you will need to replace your multi-point lock soon. Why is this? The reason for this is that the door sensor is set to burglar mode. It may also be worth considering adding convenience so you have a simple control and disarm button rather than having to enter the disarm code every time.

To determine what the error is, refer to the "error log" in the control panel. Then disconnect the appropriate sensor and replace the batteries. There is nothing obvious to report and no error messages on the control panel. This can be resolved by first checking that the alarm siren cover is securely attached and that the tamper spring is firmly engaged with the siren.

3. One short long shot to the face or to the side: “COME ON, I’M MISSING!” May be the answer to the previous point (item 2). There is an interpretation only with a hand gesture or combined: with a hand and this signal.

4. A series (from 3 or more) short-range ones:
- to oncoming traffic, if you are turning left: “PASS, I NEED TO TURN!”;
- to the back of the vehicle in front: “PASS!”;
- at the intersection, to the gaping driver ahead, “LET’S GO, DON’T SLEEP!”

To achieve this goal, you may need to apply some kind of packing material behind the siren, especially if your wall surface is not completely flat. Unfortunately, our newest alarms operate on a different radio frequency, so they will not work with your alarm.

Common emergency signal malfunctions

Additional accessories for legacy alarms are no longer available. What do I need to do with the sensors on top to achieve this? Why not? This is a built-in security feature. To stop the beep, you need to enter the property and activate the input sensor first. During the countdown, pressing “disarm” on the key fob will turn off the alarm.

5. Large trucks and buses on the highway, which have a clear view from above of everything that is happening ahead, can indicate with a turn signal to those walking behind:
- to the left: “Don’t get out, there’s oncoming traffic ahead!”;
- right: “Come on, step on the gas - it’s clear ahead!”
This signal would be useful for everyone, because... it is unknown how much the driver of the vehicle “stepping on the heels” sees the situation ahead.

How often do my alarm clock batteries need to be replaced? We recommend replacing the siren batteries every two years. I sometimes get false alarms when animals move, why is this? Our pet sensors are very reliable. Follow the installation instructions described in the download sheet from our website.

How can I delete this message? This message informs you that your alarm has been started. Tap the checkmark button on all messages to clear the screen. This is a safer radio frequency, with the advantage that the frequency is less susceptible to interference from external sources. The viewing angle is 100 degrees.

6. It is considered good manners to respond to point 4 after overtaking to blink the emergency lights several times: “Thank you!” It’s sometimes nice to hear after that a short beep (or a short high beam): “Come on...”.

7. Similar to point 6, it is customary to thank the emergency lights if someone let you pass on the highway, having changed lanes from the left lane in advance.

However, the panel in emergency system Equipped with a battery backup to ensure continuous operation during power outages through its primary alert method. Will the system call me when the alarm goes off? This is intended for a secondary notification method only. It is unlikely that the image will be good enough to provide a positive identification in court.

Will the system notify the police? He will not notify the police. Yale is currently working on compatible accessories. Insurers vary in their requirements, both to meet their policy criteria and to obtain discounts and deals. For more information, contact your individual provider.

8. When driving at night, if you get one long, distant light in your face, it means you have:
- the high beam is not turned off;
- or something is wrong with you. Better stop right there safe place and inspect the car.
There is another variation: a series of short signals with high beams.

9. The car ahead turned on its emergency lights. Value options:
- your high beams are on, or your bulbs are too bright. Check if the high beam is on. If not, then it is better to either lag behind the car at a greater distance, or overtake. In the second case, the vehicle in front reduces speed, or even stops on the side of the road;
- something happened to the “leader” (the vehicle in front). When overtaking, it would be a good idea to ask him about the need for help (open the window, ask with gestures).

10. Several short presses on the brakes - “INCREASE DISTANCE!” Either you, or you are blinded by the light of a car behind you.

11. Single short “beep” - “THANK YOU!” Not used in populated areas (according to traffic regulations). Rarely seen. The more common one is an emergency signal.

12. Long beep, which is accompanied by frequent blinking high beam means that you need to immediately pull over to the side of the road and stop because your car is faulty or there is danger ahead.

13. If the driver describes a circle with his hand and then points down, this means that one of the wheels on your car is not working properly.

14. If the driver points to the side of the road with his hand, this means that your car has breakdowns and you need to stop to prevent them.

15. If the driver’s hand hits the air, this means that the trunk of your car is open.

16. The driver's hand points to the car door - one of your doors is not tightly closed or something is stuck in the opening.

17. Before overtaking, you can briefly blink your headlights, thereby indicating to the car in front that you are about to overtake.

18. On the highway, in dark time days, when a truck overtakes another car, the driver of the truck does not see whether he has overtaken the car or not. It is considered a rule of good manners that if the driver of the car being overtaken blinks at the far side, the truck can complete the overtaking without hitting him. Again, on the highway at night, when someone is overtaking you, switch to the close one as soon as the overtaking person catches up with you, so as not to blind him through the mirror (not everyone understands this either, although this is clearly stated in the rules).

19. Turning the headlights off and on - “YOU FORGOT TO TURN ON THE LOW BEAM.” It is used in the evening, when it is necessary to comply with traffic regulations about turning on the low beam.

20. Both in fog and at night, preferably the leader and the follower should change places every half hour. This is easy even with a stranger (if he has a built-in intelligence) - overtook - winked at the emergency lights, like “thank you, now I’m tired” - again blinked the emergency lights a couple of times and turned right.

21. If you notice a stone or a foreign object between the slopes of a truck/truck, show the driver of the heavy truck the muzzle. This can be dangerous if a stone hits the windshield of a vehicle behind you.

22. A driver who has forgotten to turn off the turn signal can blink alternately with the left and right turn signals. Another option is to stick your hand out the window, up and show contact with your index finger and thumb, or squeezing your hand into a pinch and releasing it.

23. If you see that a truck has made a left turn in order to overtake on a hill, then you kindly request that you do not interfere with it, but let it pass. It is very difficult to accelerate a loaded car on an uphill slope, and it is very easy to “land” it.

24. When a car ahead in oncoming traffic is overtaking and the distance to you seems to be sufficient, but the car begins to briefly flash its high beams. This means that there are two or more cars overtaking. During daylight hours you rarely see this, but in the dark and during precipitation, when it is difficult to estimate the distance to oncoming people, it does happen. This often happens when two cars go together. The leader often, when going out to overtake, can understand that the follower will not make it in time only when this overtaking begins. The follower, on the other hand, sees only the dimensions of the leader and relies on him and is generally unaware of the current situation.

25. You overtook, successfully changed lanes, and the car in front turns slightly to the right, first flashes the left turn signal twice, then the right one twice too - this means “overtake, you got into the column.”

26. In Europe, it is simply taken as an axiom: on autobahns, cars in front will start flashing their emergency lights. It means “there’s an obstacle (traffic jam) ahead, I’m sharply reducing speed.”

Note #1. As a rule, “snowdrops” and “dummies” understand only the first two points. Applying other points of this “ABC” to them is fraught with unpredictable consequences.

Note #2. Points 5, 6 and 7 - “get up” on the track.

Note #3. The use of emergency lights (see paragraphs 6 and 7) is very developed in Europe. As a result, in our country this is understood mainly by transnational trucks and buses.

Note #4. Regarding the warning from the traffic police, the following options are also possible: “I noticed that if traffic cops with a radar catch our lane, then they light 2 distant signals, and if they are already standing with a client or are herding the other side, then one.”

Note #5. Given that you can know these unspoken rules and carry them out in an exemplary manner, you are not 100% insured against some vile types who can annoy you with a false signal. So ATTENTION, ATTENTION and again ATTENTION on the road. Decide to maneuver when you have good review on the road (straight, not bend or turn), suitable weather, normal road surface and when the performance characteristics of your car and your experience allow you to perform the maneuver.

Let me summarize.

1. Don't forget about "gratitude" on the road. This not only lifts the mood (!), but also sharply increases the desire to “curtsey” to others on the road (once again!). Don't forget that you, like others, love to be thanked.

2. Be attentive not only to yourself, but also to others. Imagine you have an oil leak (gasoline, a flat tire, etc., etc.) and you may find yourself in difficult situation. And when they at least warned you: they beeped when overtaking / ahead, showed that something was wrong with you, etc. - then there may not be a problem at all. The same thing happens to everyone. Help them.

3. Everyone is equal on the road. If you were thieves three times, they would find a bolt with a left-hand thread for you. Today you, and tomorrow you. The truck driver will not show that there is oncoming traffic ahead, then you will explain to the Almighty why you are so good.

4. And, most importantly, remember - everything comes back. How you treat them is how they will treat you. And those who do not follow this rule - let them comprehend everything with their foreheads and pockets.

P.S. I decided to add templates for traffic police “parcels” against harassment, like, “Why are you signaling with your headlights?”

1. “I confused the windshield washer lever with the high beam.”
2. “Sorry, I confused you with my friend.”
3. “Pressed the wrong button.”
4. “I was dodging a stone (pothole) and accidentally hit it.”
5. “You know, it seemed to me that you fell asleep at the wheel and are now going to drive towards me, so I honked at you.”

Taken from the site "zabarankoi.ru"

5 years Tags: mutual understanding and mutual assistance on the roads!

Subscribe to news