Recommended engine oil for Nissan Almera. Recommended engine oil for Nissan Almera Oil for Nissan Primera with gasoline engines GA16DS, SR20DI, SR20DE

Story model range Almera from Nissan began in 1995 with the release of the first generation of the car. Almera N15 was produced specifically for European market and quickly occupied a vacant niche among budget cars C-class. The 15th series of the model was designed to supplant the outdated Nissan Sunny and, according to its data, almost exactly repeated Nissan Pulsar. The popularity of the car came due to its highest quality assembly and excellent driving performance. All this was complemented by a pleasant price and comfortable interior, thanks to which the new product fits perfectly into the competition in the market on a par with Honda Civic, Skoda Octavia, Mitsubishi Lancer, Toyota Corolla and Opel Astra.

Belonging to the “golf” category was confirmed by the installation of simple inline fours under the hood until 2000. So, the first Almera was equipped gasoline units with a working volume of 1.4 and 1.6 liters, as well as one 2-liter diesel engine, which soon acquired a gasoline analogue. The power of the units ranged from 87 to 143 hp, while they were unpretentious to oil. You can find out what kind of oil was poured into the engines and how much further in the article. The N15 generation was produced in 2 stages: from 1995 to 1998 and from 1998 to 2000. Basically, the versions differed in changes in appearance.

In 2000, the place of the 15th Almera was taken by the N16 generation. Mass production lasted until 2006 and included the release of models in sedan and hatchback bodies with 3 and 5 doors. The first update took place in 2003, after which the car received new bumper, new headlights and the addition of a 1.5-liter diesel engine to the engine range. Gasoline modifications included versions of 1.5, 1.8 liters, as well as a turbodiesel with a volume of 2.2 liters. WITH automatic transmission Only the 1.8 engine worked, and all the others received manual transmissions.

Generation N15 (1995 - 2000)

Engine Nissan GA16DE 1.6 l. 99 hp

Oil types (by viscosity): 5W-30, 5W-40, 10W-30, 10W-40
How many liters of oil in the engine (total volume): 3.2 liters.

Engine Nissan SR20DE/DET/VE/VET 2.0 l. 143 hp

Which engine oil Filled from the factory (original): Synthetic 5W30
Oil types (by viscosity): 5W-20, 5W-30, 5W-40, 5W-50, 10W-30, 10W-40, 10W-50, 10W-60, 15W-40, 15W-50, 20W-20
How many liters of oil in the engine (total volume): 3.4 liters.
Oil consumption per 1000 km: up to 500 ml.
When to change oil: 7500-15000

Group cars Renault Nissan distinguish good performance characteristics and build quality. Truly car enthusiasts met Nissan cars back in the 90s of the last century, when used equipment was actively imported to Russia automotive technology. Since then, the army of fans of cars from this manufacturer has been steadily growing.

How Nissan Almera Classic appeared in Russia

It is noteworthy that the Nissan Almera N16 was designed by Nissan, although in 1999 year Nissan and Renault have already teamed up. The initial launch into production was carried out by the Korean company Samsung Motors, being one of the divisions of Renault. Industrial production of the first generation Nissan Almera N16 began in 2000 and continued until 2003, when the model was restyled.

These are inexpensive and practical cars were created on the N16 platform, which was used in the design Nissan Primera P12 and Nissan Almera Tino. The Nissan Almera Classic N16 car officially began to be imported into Russia in 2006 and was sold until 2013.

After some time, assembly in Russia of the third generation Nissan Almera Classic, which had the G15 index, was established. The car is still produced at the plant in Togliatti.

Nissan Almera Classic G15 was created on a symbiosis of two platforms - L90 from Renault Logan and L11K from Nissan. The presented videos show the interior and exterior of the car. Exterior taken from L11K - Japanese Nissan Bluebird Sylphy second generation. The car has a presentable European look and sells out very quickly. Despite the fact that 20 thousand cars were produced during 2013, and starting from 2014, about 50 thousand are produced per year, the demand for this model is very high and exceeds supply.

Lubricants for Nissan

What kind of engine oil should be used for the Nissan Almera Classic G15 and N16 so that replacing it will only have a positive effect on the operation of the engine? The fact is that each of these cars has its own engine. For example, the Nissan Almera Classic H16 has QG15DE (1.5 l, 98 hp) or QG18DE (1.8 l, 116 hp) units. Nissan Almera G15 is equipped with K4M from Renault, 1.6 liters, 16 valves, 102 hp. With. This is the only engine that comes with the car. Russian assembly. All three engines are 4-cylinder and have 16 valves.

2013 Nissan Almera

What oil is best for Nissan Almera G15? You should fill in engine oil with the following characteristics: according to SAE it should be 5W30, in warm climates it can be replaced with an all-season 10W30 or 15W30. The first number means the temperature range of use, or more precisely, the minimum temperature at which the oil will not thicken. The smaller the number, the more low temperatures lubricant composition remains liquid.

The second number is an indicator of the viscosity and reliability of the film that the engine oil forms on the surface of the rubbing parts. The higher the number, the more durable and stable, without tears, the film is formed. For new engines, a viscosity of 30 is sufficient. Over time, with high mileage It is advisable to increase the oil viscosity to 40-50.

API quality class: SL, SM. This means that motor oil with these characteristics is intended for multi-valve and turbocharged engines. The SL class is designed for engines manufactured after 2001, and the SM class for power units after 2004. SM class lubricants are higher quality and wear resistant.

ACEA quality class: AZ/VZ. This means that the lubricant is resistant to mechanical destruction and has high performance qualities. Must be used in highly accelerated gasoline engines and has extended intervals between shifts.

Nissan Almera 2000

What engine oil is required for Nissan Almera Classic and N16? The engine should be filled with lubricant that has the same characteristics according to SAE - 5W30, in cold winter 0W30 should be used; in warm climates, replacement with all-season 10W30 or 15W30 is allowed.

According to API standard– here are more modest characteristics, SG, SH, SJ. These lubricant compounds are intended for engines of earlier production - from 1996 and later. Lubricants with these parameters have good stability to the formation of sediments and soot, and are also able to retain their properties at low temperatures. ACEA quality class: 96-A2. These are standard level lubricants.

The conclusion is as follows: since the K4M engine is more modern, compared to the QG15DE and QG18DE, the requirements for the lubricant composition are much more stringent.

That is, lubricants intended for K4M can be successfully used for engines of earlier production, since their characteristics are better. The videos presented on the Internet clearly explain the definitions of lubricant markings.

Procedure for replacing the lubricant How much lubricant does a Nissan Almera Classic G15 require replacement? By technical specifications

, a volume of 4.8 liters of oil is required. It is best to use the original Nissan 5W30. Replacing the lubricant in the Nissan Almera Classic N16 is carried out with 2.7 liters of lubricant in a 1.5 liter engine. This is according to the passport, but in practice a slightly larger volume of lubricant is required, up to 3 liters. After what mileage does the lubricant need to be replaced? For the Nissan Almera G15, the rated mileage is 10,000 km for synthetics. Semi-synthetic oil needs to be changed every 6000 km. In practice, given Russian conditions operation and fuel quality, synthetic lubricant should be replaced after 7-8 thousand, and semi-synthetics - after 5000 km. This will guarantee Very good condition

motor. At Nissan Almera Classic

N16 is supposed to change the lubricant every 15,000 km. But for this car it is best to carry out the procedure twice as often as indicated above. The procedure in which the lubricant is changed is almost the same for both cars. Before making a replacement, you need to prepare: a container where the used oil will be drained, a set of wrenches, a puller for oil filter or a wrench with a very wide grip, a rag and a brush, lubricant in required quantity

, as well as a new original Nissan oil filter and a new copper gasket for the drain plug. The car drives into inspection hole or onto an overpass, the engine is warm. In some videos the car is lifted on a lift, but this is worst option
, since in the raised state it is impossible to get close to the hood of the car, and it will have to be lowered and raised. The hood lifts and unscrews filler plug
, where the lubricant will subsequently be poured. Under the car, in the engine crankcase, it unscrews a couple of turns drain plug . Before this, you need to clean the surface from dirt. The container is inserted, the cork is quickly unscrewed, releasing. Be careful not to get hot liquid on your hands.
It takes some time to wait until all the lubricant flows out of the hole. Is there some more good advice– to completely remove any remaining lubricant from the crankcase, you need to take a large-volume syringe and put a thin hose on it, running its end into the bottom of the crankcase. From there you can get another 200-300 ml of the dirtiest, used lubricating fluid.
After all the lubricant has flowed out, the drain plug with a new copper gasket is screwed into place.
Then it is unscrewed with a puller old filter. It is necessary to replace the container again, because some amount of lubricant will again leak out of the installation hole and from the filter.
A little more than half the volume of lubricating fluid is poured into the new filter, and the rubber gasket is lubricated with oil. New filter screws into the installation hole, but do not tighten it too much.
IN filler neck a new lubricant is poured in the required quantity indicated above for each engine. The level is periodically checked with a dipstick until it reaches the middle between the minimum and maximum.
The engine starts and runs for several minutes so that the lubricant evenly fills the entire lubrication line. The oil pressure light should go out. After this, the lubricant level is checked again with a dipstick. If necessary, add a little.

In the videos presented on the Internet, you can clearly see the process of changing the lubricant. The procedure is simple, even a novice driver can handle it. Now the car can be used until the next replacement.

Refueling volumes:

Engine oil5W-40 ke900-90042

2.7 l

Automatic transmission oil Matic-D ke908-99931

total filling volume - 7.7 l

partial filling volume - 4.5 l

Manual transmission oil XZ OIL 75W-80 ke916-99931

3.0 l

AntifreezeL248 ke902-99945

6.7 l

Brake liquid DOT 4 ke903-99932

filling volume - 1 l

P - check, lubrication

Z- replacement

Maintenance interval (Months and kilometers), whichever comes first.

Months

108

120

132

144

156

168

Mileage, t.km.

105

120

135

150

165

180

195

210

Engine oil

Oil filter

Drive belts

Engine cooling system

Coolant see note (1)

Air filter

Fuel and gasoline vapor lines

Regular spark plugs type see note (4)

Spark plugs with platinum tip****

Engine management system diagnostics (including oxygen sensor) (Consult).

Direction of headlights. Measuring the luminous flux of external lighting devices.

Tire pressure, condition, tread wear (incl. spare wheel), if necessary. rearrange

Brake pads, discs, drums, cylinders and other brake components

Pedal brake, parking brake, clutch (Check braking efficiency, free play)

Vacuum hoses, brake pipes and their connections and brake booster control valve.

Brake and clutch system: checking fluid level and leakage

Liquid in brake system, clutch fluid.

Power steering fluid and hoses (check fluid level and for leaks)

Oil in mechanical box transmission

Automatic transmission fluid

Steering mechanism and drive, axle and suspension parts, exhaust system(damage, leaks)

Drive shafts (half shafts) (damage, leaks)

Checking the toxicity of exhaust gases

Checking the body for corrosion (body inspection) see note (2)

Seat belts (function, damage)

Lubricating/checking hinges and locks of doors, hood, trunk

Front and rear windshield wipers, windshield washer system, fluid (level)

Battery (level, electrolyte density, terminal lubrication)

Airbag see note (3)

Many car enthusiasts are wondering about choosing the most effective lubricant products for Nissan cars. To make an informed choice, it is necessary to study the main characteristics of the vehicle and the conditions of use: type power unit, mileage, climate.

As additional information You can familiarize yourself with the tolerance specified for a particular car model. Such information is written in the service manual or can be found on the Internet. The most significant are ACEA approvals and SAE. As for the second, it indicates the viscosity class.

Selection by viscosity grade

Every experienced motorist is familiar with indicators such as 5w30, 10w40 and so on. These numbers indicate the temperature index of use of the motor fluid. The most popular markings in the domestic space are: SAE 0w-20°/+35°C.

For countries with cold climates, oils with SAE indicators 5w30 with temperatures from -30° to +35°. In temperate zones, it is best to fill with SAE 5w fluid at the same temperature. No less relevant is a lubricant with the characteristics of 5w40.

ACEA approval should not be ignored either. This indicator demonstrates compatibility with internal combustion engines. Passenger cars Nissan Qashqai, Primera, Almera, X-Trail, Tiida, Teana, Postfinder, Murano with left-hand drive work perfectly on lubricant with A3/B4 ratings.

These are standard types from the manufacturer Nissan, marked 5w40. If it is not possible to use original products, experienced specialists recommend filling in oils from the company:

Shell;
Total;
Castrol;
Ultra;
Mobil;

First of all, you should pay attention to tolerances, the company’s reputation and the final cost. However, if we talk about the price aspect, then for Nissan 5w40 oil you will have to pay around 2000-2300 rubles for a 5 liter canister. This is significantly cheaper than foreign analogues.

For cars Vehicle with a particulate filter, C4 - ACEA fluid is allowed. In this case you can use Alternative option lubricants from Liqui Moly.

Nissan sports cars require the use of oil with special characteristics. Typically, sports cars use compounds with high level viscosity – 10w50, 15w50. Owners of models such as Skyline or 350Z prefer to trust the opinions of service station professionals.

On such models they are most often used original products from Mobil, LM, Motul. Viscosity is selected according to the manufacturer's recommendations and technical parameters engine. Climatic conditions also play a role important role when choosing effective products.

Selection of oil for Nissan models

Oil for Nissan Primera with gasoline engines GA16DS, SR20DI, SR20DE

For all types of power units with the specified parameters, it is recommended to use such lubricants:

branded lubricants from the vehicle manufacturer;
liquids type SG, SF according to API classifications;
viscosity class is selected according to climatic conditions and engine parameters.

If we are talking about the approximate volume of the product used, then for replacement you will need:

SR20DI – 3.2 and 3.4 liters, respectively;
GA16DS – 2.8 and 3.2 liters.

The choice of viscosity class is made according to temperature conditions:

range from -25°C -10°C – 5w20;
from -25°C+15°C – 5w30;
from -20°C+40°C – 10w30.

It is best to use products with a viscosity grade of 10w30 in areas where temperatures exceed 20°C. For hot climates, oils with a viscosity of 20w50, 20w40 are used.

Qashqai

Regarding the use of lubricants for the motor Nissan Qashqai, then here Special attention Manufacturer's recommendations should be followed. Therefore, it is best to fill car power units with synthetic-based substances with a viscosity class of 5w40.

Since the Qashqai 2.0 internal combustion engine system holds 4.5 liters, it is necessary to purchase 5-liter cans with original oil.

Nissan X-Trail

According to performance characteristics gasoline engines QR20DE, QR25DE, for them should be used original fluids from Nissan:

By API system with classes SH, SG, in some cases SJ are used;
according to the ACEA 98B1 system;
By ILSAC classification type GF1.

For temperatures from -30°C, 10w30 lubricants are used. For areas with hot climates, it is necessary to use products with a viscosity of 20w40.

Dry Nissan engine The X-Trail will need about 4.5 liters of oil. With the base liquid it will take about 3.5 liters.

Nissan Beetle

HR16DE power units running on gasoline need to be filled with lubricant with the characteristics and requirements:

original products from the car manufacturer or a foreign analogue;
high quality according to the SL, SM - API system;
ACEA compliance;
standards ILSAC quality GF4, GF3;
viscosity class according to climatic conditions.

For power devices Nissan Juke for diesel engines, use the following liquid:

from a car manufacturer;
ACEA system class – C4;
according to SAE classification, the oil viscosity should be 5w30;
low-ash mixtures "Low SAPS".

Any replacement of a lubricant with diesel fuel will not do without 4.4 liters, and taking into account the oil filter 4.24 liters.

Nissan Teana

According to the performance characteristics of the car, the manufacturer recommends filling branded oil. The manual instructions describe the parameters: viscosity, class, type and features of use.

After thoroughly studying the parameters, you can start choosing motor lubricant taking into account:

1). Season when the liquid can be applied. Experts do not recommend pouring separate products for summer or winter. It is better to use off-season oils, since they can be used both in winter and summer. However, any type of mixture used has its own characteristics, additives and flow rates;

2). Basic basis substance taken. Not recommended for use mineral liquids on units Nissan Teana. Trouble-free operation is ensured only thanks to synthetic and semi-artificial lubricants;

3). The presence of special markings on the oil canister, demonstrating certain characteristics and properties for a particular type of engine.

Teana L33 2014 release

According to the performance characteristics of the car, experts recommend using QR25DE for units:

original mixture from Nissan;
quality standard SM, SN, SL according to API;
quality level from ILSAC – GF5, GF4, GF3.

As for the filling volume of the lubricant on VQ, QR power units, it is 4.3 liters, and taking into account the filter, 4.6 liters.

Nissan Tiida 2004-2014 release

According to the assigned instructions for the models Nissan Tiida with engines MR18DE, HR16DE must be used special types liquids:

branded lubricants from Nissan or similar oils from foreign manufacturers;
ACEA quality – class A1B1, C2C3;
ILSAC standards – lubricant GF4, GF3;
API standards – types SM, SL.

The viscosity level is selected according to climatic conditions.

Nissan Almera

Manufacturers recommend using Nissan brand oil with a viscosity level of 5w30 or 5w40. These indicators correspond to synthetic-based products for off-season use. Refill capacity is 4 liters.

You can also use foreign analogues:

Total Future 5w30;
Mobil 5w40;
Petro-Canada 5w30.

Any use of oil for a Nissan car must be considered and tested. Not worth purchasing lubricants, not corresponding to the parameters internal combustion engine systems, as this can lead to wear and complete deformation of the motor.

The chemical composition of lubricating fluids does not need to be studied before a scheduled oil change. It is enough to familiarize yourself with the manual for the car. In this documentation, the manufacturer describes the parameters of the recommended engine oil for Nissan Almera.

Nissan Almera Classic B10 2006-2012

Car engines QG 15DE 1.5 l and QG 16DE 1.6 running on gasoline.

If we look at the Nissan Almera operating instructions, the car manufacturer recommends using lubricants, meeting the requirements:

original Nissan oils;
in accordance with API classification - oil type SH, SJ or SL;
according to the ILSAC standard - GF-3;
the viscosity of the lubricant is selected according to scheme 1;
The approximate volume of oil for replacement, taking into account the oil filter, is 2.7 l (without filter - 2.5 l).

The approximate volume of motor oil is calculated based on the drained lubricant, excluding the lubricant remaining in the engine after draining.

Scheme 1. Dependence of viscosity parameters of motor oil on ambient temperature.

According to Scheme 1, you need to use motor lubricants:

if the temperature is from -30°C (or less) to +30°C (and above), pour 5w - 20,
at temperature conditions from -30°C to +30°C (and above) fill in 5w - 30;
if the thermometer shows from -20°C (or less) to +30°C (and above), pour 10w - 30; 10w - 40 (7.5w - 30);
V temperature range from -10°C to +30°C (or more) use 20w - 40;
at temperature conditions from -10°С to +25°С fill in 20w - 20;
from 0°C to +30°C (or more) SAE 30 is used.

Nissan Almera N16 2000 - 2006

Gasoline power units QG15DE 1.5 l and QG18DE 1.8 l.

original Nissan lubricants;
according to API classification - oil type SH, SJ or SG (use of API - CG-4 is prohibited);
according to the ILSAC standard - GF-I, GF-II, GF-III;
ACEA quality class - 96-A2;
the viscosity of the lubricant is selected according to scheme 2;
The approximate volume of engine oil for replacement including the oil filter is 2.7 l (without filter - 2.5 l).

Scheme 2. Selection of engine fluid viscosity depending on the temperature outside the car.

According to diagram 2, the manufacturer recommends pouring:

under temperature conditions from -30°C (or less) to -10°C, pour 5w - 20 (this oil is not recommended for use if the machine is often operated at high speeds);
at temperatures from -30°C (or less) to +15°C, fill in 5w - 30 (car oil helps reduce consumption fuel mixture car);
in the temperature range from -20°C to +15°C, pour SAE 10w;
if the thermometer shows from -20°C to +40°C (or more), use 10w - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
if the thermometer shows from -10°C to +40°C (or more), use 20w - 20; 20w - 40; 20w - 50.

It is better to use 5w - 30 lubricant.

Nissan Almera G15 from 2012

According to the manual, it is necessary to use lubricants that meet the requirements:

Nissan branded motor fluids;
ACEA quality class - A1, A3 or A5
according to API classification -SL or SM;
viscosity parameters motor fluids selected according to scheme 3;
The approximate volume of oil for replacement is 4.8 liters (including the oil filter) and 4.7 liters (excluding the filter device).

Scheme 3. Selection of viscosity according to the temperature of the region in which the car will be operated.

According to diagram 3, it is necessary to fill in motor fluids:

in the temperature range from -30°C to +40°C (and above) fill in 0w - 30, 0w - 40;
if the thermometer shows from -25°C to +40°C (or more) use 5w - 30, 5w - 40;
when the thermometer readings are from -25°C to +40°C, pour 10w - 40.

It is preferable to use 5w - 30 oil.

Conclusion

The recommended engine oil for Nissan Almera is capable of filling gaps in friction pairs of a certain type of engine to protect the engine from abrasion and overheating. Filling with thicker or thinner motor oil will worsen the performance characteristics of the power unit and lead to its breakdown.

Manufacturers of lubricants use various lubricant bases (synthetic, semi-synthetic, mineral water) and add various chemical additives. The fact that a certain brand of motor oil is suitable for a particular car model can be indicated by the tolerances on the canister. At the same time, people buy oils for the summer that are more viscous than for the winter.