Auto mechanic tools. List of main car instruments. Special tools in Car service

In the trunk of any motorist there is a tool for repair work. Some are a few spanners, a hammer, a pair of screwdrivers and pliers. Others - a full set of fitting and assembly tool, such as a set of auto mechanics NIA-1.

Set of auto mechanic NIA-1 Allows you to perform assembly and dismantling work in the process of maintenance or during the repair of motor vehicles of domestic and foreign production. The thoughtful combination of the tool included in the set, its quality and low price do NIA-1 An excellent alternative to foreign tool sets.

The auto mechanic set includes a wide range of wrenches combined keys, combining the functions of the horn and cape. The presence of this type of keys allows you to reduce the total amount of the tool in the set and reduce the weight of the set itself. And also gives one undoubted advantage: if when working a horn key, you will need a cape of the same size, it is only worth turning the key to the other side - and not to look for a suitable bag with tools!

The ratchet key will help the car mechanic to work in a limited space. Due to the presence of a ratchet in the key design, it disappears the need to rearrange it when unscrewing fasteners. Tools NIA-1 It is also completed with the end heads with a size of 8 to 24. The end heads allow you to unscrew without damage any fastener, because Contact him throughout its height. Due to this, it is prevented "rounding" faces of fasteners. The end-in-one in the set includes standard candle heads (16 and 21 mm), which allow you to quickly and without effort to replace the spark plugs of gasoline engines. Stall tool included in the auto mechanic set helps when Assembly works, and gloves protect the hands of an auto mechanic from dirt and damage. And the tool is packed in a solid bag, which is convenient when carrying and takes up little space in the car enthusiast trunk. The tool is made of high-quality materials providing its frequent use and high loads during operation.

Technical data
Composition of set
1. Conference wrench combined 8x8 - 1pc.
2. Welcome combined 10x10 - 1pc.
3. Welcome wrench combined 12x12 - 1pc.
4. Welcome wrench combined 13x13 - 1pc.
5. Welcome wrench combined 14x14 - 1pc.
6. Welcome wrench combined 17x17 - 1pc.
7. Welcome wrench combined 19x19 - 1pc.
8. Welcome wrench combined 22x22 - 1pc.
9. Welcome wrench combined 24x24 - 1pc.
10. Torch head 8 - 1pc.
11. headband 10 - 1pc.
12. headband 11 - 1pc.
13. head head 12 - 1pc.
14. headband 13 - 1pc.
15. headband 14 - 1pc.
16. headband 15 - 1pc.
17. head head 17 - 1pc.
18. headband 19 - 1pc.
19. headband 22 - 1pc.
20. headband 24 - 1pc.
21. Hands Candle "16" - 1pc.
22. Hands Candle "21" - 1pc.
23.Sharnir - 1pc.
24. Saluer, 250 mm - 1pc.
25.Clotchka - 1CT.
26.Well with attachment. Square large, 300 mm - 1pc.
27. RECEPTURE SLADE 8.0х150 - 1pc.
28.Thistener slotted 6.0x150 - 1pc.
29. Conductive Condition No. 2x100 mm - 1pc.
30.The is a cruciform №3x150 mm - 1pc.
31. Summer 160 mm - 1pc.
32. Millet 500 g - 1pc.
33. The surpars combined 180 mm - 1pc.
34.Powers lateral 180 mm - 1pc.
35.Locks adjustable 250 mm - 1pc.
36. PVCs knitted PVC - 1pc.
37.Reight of ball - 1pc.
38. BlockNot for entries - 1pc.
39.Sumka - 1pc.

In the trunk of any motorist there is a tool for repair work. Some are a few spanners, a hammer, a pair of screwdrivers and pliers. Others have a complete set of a fitting and assembly tool, such as a set of auto-mechanic NIA-1.

The set of auto-mechanic NIA-1 allows installation and disassembly work in the process of maintenance or during the repair of motor vehicles of domestic and foreign production. The well-thought-out combination of the tool, its quality and low price is made by NIA-1 excellent alternative to foreign tool sets.

The set of tools NIA-1 is also completed with the end heads of size from 8 to 24. The end heads allow you to unscrew without damage to any fastener, because Contact him throughout its height. This prevents the "rounding" faces of fasteners.

The tool included in the kit is certified (if necessary, the appropriate documentation is provided).

Composition of set

1.	Wrench wrench combined 8x8	1 PC.
2.	Wrench wrench combined 10x10	1 PC.
3.	Wrench wrench combined 12x12	1 PC.
4.	Wrench wrench combined 13x13	1 PC.
5.	Wrench wrench combined 14x14	1 PC.
6.	Wrench wrench combined 17x17	1 PC.
7.	Wrench wrench combined 19x19	1 PC.
8.	Wrench wrench combined 22x22	1 PC.
9.	Wrench wrench combined 24x24	1 PC.
10.	Torch head 8.	1 PC.
11.	Oktor head 10.	1 PC.
12.	Torch head 11.	1 PC.
13.	Fur head 12.	1 PC.
14.	OK head 13.	1 PC.
15.	Fork head 14.	1 PC.
16.	Torch head 15.	1 PC.
17.	OK head 17.	1 PC.
18.	Torch head 19.	1 PC.
19.	Torch head 22.	1 PC.
20.	Fork head 24.	1 PC.
21.	Head Candle "16"	1 PC.
22.	Candle head "21"	1 PC.
23.	Hinge	1 PC.
24.	Extension, 250 mm	1 PC.
25.	Custom key	1 PC.
26.	Key with attach Big square, 300 mm	1 PC.
27.	Screwdriver strut 8.0x150	1 PC.
28.	Screwdriver slotted 6.0x150	1 PC.
29.	Screwdriver Cross-shaped №2х100 mm	1 PC.
30.	Cruciform screwdriver №3х150 mm	1 PC.
31.	Chisel cleaned 160 mm	1 PC.
32.	Hammer 500 g	1 PC.
33.	Pliers combined 180 mm	1 PC.
34.	Lumps side 180 mm	1 PC.
35.	Plugs adjustable 250 mm	1 PC.
36.	Gloves knitted PVC	1 PC.
37.	Pen ball	1 PC.
38.	Notebook	1 PC.
39.	A bag	1 PC.

Passport to the set of tools of auto mechanic NIA-1

The ratchet key will help the car mechanic to work in a limited space. Due to the presence of a ratchet in the key design, it disappears the need to rearrange it when unscrewed fasteners.

Set of tools NIA-1 It is also completed with the end heads with a size of 8 to 24. The end heads allow you to unscrew without damage any fastener, because Contact him throughout its height. This prevents the "rounding" faces of fasteners.

In addition to the end, the set includes standard candle heads (16 and 21 mm), which allow you to quickly and without effort to replace the spark plugs of gasoline engines.

The rest of the tool included in the auto mechanic set helps when conducting collapsible assembly works, and gloves protect the hands of an auto mechanic from dirt and damage.

The entire tool is packed in a solid bag, which is convenient when carrying and takes up little space in the cargo guide. The tool is made of high-quality materials providing its frequent use and high loads during operation.

Characteristics

Payment

Cash payment

Delivery

Self-delivery from warehouse

Mon-Fri: from 10:00 to 18:00
Pickup for free.

Up to 30 TRP. - from 500 rubles;
From 30 t.. Rub. - is free.

Delivery to regions of the Russian Federation

Delivery by Russian Post

Cash payment

You can pay in cash with a courier on the fact of delivery of products in Moscow and the Moscow region.

Cashless payment (for legal entities)

After placing the order, send it to the mail [Email Protected]website order number and your details of the organization.

Payment in a bank account (for individuals)

You can pay for an order in any commercial bank.
After placing the order, send it to the mail [Email Protected]website Order number and FULL NAME with contact data, we will put your bill for payment.

Payment using a bank card (for individuals and legal entities)

When paying and receiving products from a warehouse or courier, inform us in advance about the desire of payment by bank card.

Self-delivery from warehouse

Self-removal from the warehouse is possible during his work hours:
Mon-Fri: from 10:00 to 18:00
Pickup for free.

Courier delivery in Moscow and Moscow region

Delivery of small cargo in Moscow within Moscow Ring Road:
Up to 30 TRP. - from 500 rubles;
From 30 t.. Rub. - is free.
Delivery of small-sized cargo in Moscow in the Moscow region is individually.

Delivery of bulky cargo in Moscow and the Moscow region - Indianadually.

We will definitely agree with you a convenient delivery time.

Delivery to regions of the Russian Federation

Carried out by transport companies. We cooperate with all major transport companies.
The choice of a transport company depends on your wishes and stipulates with each client individually.
The cost of shipping shipping to the transport company terminal is free.

Delivery by Russian Post

At your request, we will send an order through the FSUE "Post of Russia".

Professional locksmith tool for car service is an important component that allows us to ensure proper quality of services. It is necessary for performing work at a high level and coverage of the entire spectrum of auto repair operations. Buying reliable, high-quality we invite to spend in our online store. "Automaster" represents the best manufacturers and offers the most complete list of the required auto-tool.

Our range

In our store you can buy King Tony, Mastak, Stahlwille and Stels products. It is offered in a wide range, allowing you to fully equip the car service from scratch. The sale presents:

The tool in the lodges is convenient solutions for organizing professional jobs along with instrumental trolleys and locksmiths. Huge selection of sets: mono, mixed, special. The entire list of necessary accessories: from nozzles and probe to filter pulse, measuring and test equipment. Also - ready-made sets of lifesters with the number of trays from 9 to 17.
Tool trolleys are mobile jobs for auto showing with a complete set of tools in lifes. Solutions with various designs of carts and equipment: standard, master, pros and expert.
Dynamometric keys and adapters are equipped to work with responsible fasteners requiring control of tightening force. Large selection of inventory: Dynamometric keys and screwdrivers, electronic adapters, torque amplifiers. Also a complete selection of keys and repair kits for self-replacement of worn items.
Car repair keys - a full range of wrenches for buying one by one and in sets. Rozhkovy, precipitated, combined keys, end and ratchet. For hard-to-reach / narrow sections - with a hinge, curved profiles. Special keys: balloon, candle, cut, starter, etc.
Sets for a car - universal sets of equipment for work on the road and in the workshop.
Auto tools in drawers and suitcases, a special dielectric tool for electrical operations.
Screwdrivers and replaceable sting - supplies for nuts, clamps, power, dielectric, with various profiles and sizes. T-shaped screwdrivers for improved grip.
Hinged and globe, shock, cutting and measuring instrument: a complete list of equipment required for repair, plumbing and installation work.
Facial and special heads are a huge selection of nozzles for assembly and plumbing operations: standard, shock, special, thin-walled, short and deep, with various square sizes. The whole range of profiles used: from special 4-faceted, radial to standard 6 and 12-graded, and the so-called e-neck TORX.
Accessories for end heads: ratchets, cardanis, grooves, extension cords, adapters, as well as repair kits to them.

Depending on the method of execution, the washing can be done manually, mechanized and combined. Manual washing is made from a hose with a branded or brush. When washing a stream of medium or high pressure, the hose must have a washing gun, which allows you to adjust the shape of the jet. For the washing of the lower, more contaminated parts of the car, use a directional, dweller stream, a fan, cone-shaped jet is used for washing the upper parts.

For mechanized washing, special washers are used, which, depending on the control method, can be automatic and with manual drive.

Combined washing is used in the case when one part of the car is washed with manual way, and the other is mechanized.

For car wash, wash plants are used, which can be stationary inkjet-brushes with a carriage moved around the car, and with car movement, and stationary brushless with the carriage moved around the car, and with the movement of the car.

Stationary inkjet-brush installations are equipped with brushes with a swinging suspension system. Mobile washing installations were most common for car wash. They are a P-shaped arc that moves with the help of electric drive to rails laid on the washing path. On the portal, two vertical and one horizontal rotary brushes with electric drives, brushes for washing wheels of wheels and a device for drying (blowing) car after washing. Brushes are wetted through a system of pipes with nozzles. Most of the washers has an additional spraying arc that provides pre-wetting and rinsing. Monitoring the sequence of the sink is carried out using a computer.

The technological process with the use of a modern washer consists of the following operations: the total car wash with water under high pressure; splashing of detergent foam with chemical elements that make softening oil and fat deposits; Two-supplying washing of floating brushes, enveling the contours of the car, with the simultaneous wash of the bottom of the car; spraying wax (polyteroli); Two duct forced drying.

The disadvantage of brush washers is damage to the coating of the car's surface as a result of the impact of the brushes. The installation brushes must periodically be cleaned from the accumulated mud, which is not always performed. To eliminate surface damage on some models of washers in brushes, rag strips are used instead of a pile.

Performance of brush sets from 30 to 40 cars per hour at operating pressure of 0.4-0.6 MPa. To wash one car is consumed to 900 liters of water.

For car wash and the bottom of the car, stationary brushless washers are used. They do not damage the antennas and other outdoor equipment of the car, and also do not leave scratches on paints and varnishes. The performance of the settings from 20 to 30 cars per hour at a operating pressure of 0.8-1.2 MPa. Water consumption for car wash of one car - 1200-1800 l.

Due to the increased demands of car owners to the quality of washing, as well as the high cost of brush washers are increasingly used by small-sized Mobile High Pressure Installations. They can have a pump drive, both from the electric motor and from the internal combustion engine. The washing is made by hot or cold water at a pressure of 3-15 MPa.

Currently, given the high cost of water, the washers equip the circulating water supply systems, and also use biological water purification systems.

To remove moisture from the car Mosl, the washing uses special installations that remove moisture with a heated to 40-50 ° air at a pressure of 0.2-0.4 MPa, infrared rays, etc. Moisture from the engine and instruments of the ignition system after washing are removed with compressed air with a special pistol at a pressure of 1 MPa. The outer surfaces of the cabin, the hood, cladding, headlights, wings, the subharbones are wiping with a vershorized material, and the polished body surface is wiped with a bike or suede.

For cleaning the car's salon, portable and mobile vacuum cleaners are used.

Lifting and transport equipment

In order to have convenient access to all nodes and car units, various lifts received widespread in the enterprises of the car service. They can be equipped with electromechanical, hydraulic and pneumatic drives.

For maintenance and repair of passenger cars, two-handed, four-handed, scissor and plunger lifts are used, as well as tippers. When servicing a car on inspection channels can be used canvas lifts.

Most often apply floor two-bag electromechanical lifts with a loading capacity of 2-3 tons. It consists of such a lift of two boxed racks and cross. Each rack is placed undergoing screw, which moves a lifting nut. A carriage with hinged adjustable pickups is attached to the nut. The lifting running screws are driven by an electric motor through a gearbox. Rotation to another screw is transmitted using a chain transmission installed inside the crossbar.

The lift is controlled using a push button. Lifting height is 1.8-2.0 m, lifting time 50-60 s. In the extremely upper and lower positions, the carriage stops the end switch of the electric motor. The lift is installed without a special foundation on a flat surface and attached to the floor with anchor bolts.

Tippers are used when washing the bottom of the car before or repair, before welding works, anti-corrosion coatings. Good access to the bottom and axes of the car is also preserved in the case of applying single-suitable hydraulic lifts. On a small height, the car can be raised using a hydraulic, pneumatic-hydraulic or pneumatic jack.

Inside the car service company, the rise of the car and the movement of its aggregates is produced using electrothels, tags, mobile cranes, cargo carts, cock-beams and other equipment.

Other types of equipment

Diagnostic tools are used to produce technical inspections and repair of cars, allowing to detect defects without disassembling a car. The technical condition of the nodes, aggregates and instruments of the car is established according to the diagnostic parameters, the individual values \u200b\u200bof which indicate a violation of the mode of operation, adjustments, interfaces of the details of devices and mechanisms. Diagnostation is one of the technological elements of a technical inspection.

The equipment used for diagnostics can be portable, stationary and mobile. Stationary equipment includes various designs and types of stands on which they check the state of the braking system, suspension, traction qualities, angles of installation of controlled wheels, wheel balancing, etc. Mobile equipment includes a complex of special devices, with the help of which they diagnose the repair system and engine mechanisms, such as motor testers, as well as instruments for determining the exhaust gases, headlights, dimensions and turns, stands for balancing wheels without removing them with car.

There are many small-sized devices for checking the performance of aggregates, knots and car systems, such as scanners, compressors and others that use as portable equipment.

In order to facilitate the definition of the type and severity of faults and the best maintenance of the car in small car repair shops, the following devices are used.

Ommeterserving to check the sparkular coil resistance, as well as to check the elements of the electronic injection system.

Voltmeterserving to verify the status of the interrupter contacts, check the electrical network, the state of the battery and the voltage regulator.

Ammeterused to verify the electronic ignition system, as well as battery charge.

Hydrometerused to verify the electrolyte density in the battery and coolant in the radiator.

Dynamometric Key. Apply to determine the moment of tightening of fasteners, as well as spark plugs.

Roll counter. Used to adjust the idle speed of the carburetor and the diagnostics of the fuel pump.

Hour optometer. Apply to determine wheels, checking the gap in the wheel hub bearings.

Pressure gauges. Apply to test the fuel pump, tires, oil pressure in the engine, pressure in the brake system.

Property. Apply to check the gaps in the valves, between the interrupter contacts, checking the candles and the generator.

Coloring and drying chambers. Coloring and drying chambers of various designs are used for car painting and subsequent drying. The camera is a collection-collapsible, made of warmed panels design. In order for dust into the painted surface and in order to provide sanitary and hygienic working conditions during painting, the camera is equipped with a supply and exhaust ventilation, which is necessary for removing the sprayed paint and the solvent included in its composition.

Maintenance and maintenance work can be carried out by mechanized, mechanized manual and manual ways. With a mechanized method, metalworking machines, blacksmith-presses, conveyors for moving cars, electrothels, electrotals, crane beams, stackers cranes, mechanized lifts for hanging cars, diagnostic stands, microprocessor equipment, etc.

In the case of a mechanized manual method of performing work, the most labor-intensive operations in which the auto mechanic applies a different mechanized tool and equipment, such as installation for manual (hose) washing, oil development equipment, electrical and pneumatic equipment, measuring instruments, air-discharge columns, Pneumatic painting pistols, as well as other tools, instruments and equipment having electrical, hydraulic, pneumatic and other drives and actuated by a special source of energy. At the same time, a significant proportion of manual labor can be maintained here when the employee delivers the tool to the place of operation, its commissioning and connection.

With a manual way, work is performed using the simplest tools of labor, as well as devices and devices: pullers (Fig. 1), jacks, cranes and other equipment that does not have a drive from a special source of energy.

Fig. one.
Device 9680-2445 for removing and installing piston rings:
1 - handle; 2 - protrusions; 3 - stops; 4 - Captures

The quality of repair and preventive work, and, first of all, the diagnosis of the car is significantly increased when using microprocessor equipment, which increases the accuracy of calculating parameters, visual and graphical clarity of reproducing results, which favorably affects the technical condition of the car. In this case, the safety of motion increases, since the diagnosis of faults before the car exit serves as a guarantee that there will be no technical failures during operation. Careful and high-quality engine maintenance and its systems using microprocessor devices reduces the toxicity of exhaust gases, which is especially important when operating a car in urban conditions.

The condition for the correctness of the diagnosis and repair of the car malfunctions is a competently selected tool and devices that store on racks or in instrument cabinets, portable boxes and mobile trolleys. Verstaks consisting of a desktop are used at various workplaces, which, as a rule, establish vice and other devices. In retractable boxes of the workbench stored tools.

A set of general-purpose tools for performing a car maintenance may include: Various designs of removals that are used to disassemble and assembling the employable and mounted parts; Locksmith hammer with wooden handle; Screwdrivers: slotted, crucible, with a nut welded to the blade, with a forktow capture, a screwdriver tip, which is inserted into the end key and some other types of screwdrivers of various sizes; Candle wrench; adjustable wrench; end keys 6-17 mm; Special sliding universal pliers; a set of probe and beards; Files of different types; Item key for screwing the wheels; device for charging the battery; Ostrogubers with insulating covers; universal ticks; Scissors sector; Montersky knife; chisel; Hoven for metal; Shabra; Metal cutting tool (drills, cenks, shabras, sweeps); measuring tool; Drilling machines, etc.

Online store "Auto industryPort" sells professional tools for maintenance stations for various purposes. To buy a car service tool in Moscow at a low price in the online store, you need to checkout the order via the basket or contact our managers using the callback service. We have every specialist will pick up the necessary and high-quality auto tools for itself, the cost of which is available for both the car service and individuals. By purchasing tools with a set, disappears the need to buy everything you need separately.

Professional special to the car service allows you to work on the repair of cars of any complexity, therefore is the most popular in this industry. Sets are used both repair of passenger cars and truck cargo cars.

How to order Tools for car service

In our online store provided a wide selection of tools for a hundred, such as: sets of hydraulic and pneumatic devices, devices for disassembling and assembling various nodes, the cost of which depends on the manufacturer's company, configuration and materials used in their production.

To unmistakably order the special purpose of the special purpose toolkit, you need to get acquainted with the basic technical characteristics, on which prices depend. The high quality of manual devices that meet all specifications makes it possible to carry out work on the repair of passenger cars and trucks in the most difficult conditions where the use of machine tools is impossible.

Special tools in Car service

Auto Industry Each year we go to an increasing level. Extra advanced and modern machines appear, increasingly technological and multipurpose equipment for repairing them are produced. However, it was still not possible to replace the work of the auto show masters, performed by hand tools. This is exactly what determines the need for any service and a hundred in professional silent assistants. It remains only to decide on specific positions and brands.

Choose professional tools for car service and one hundred

Warehouses of our online store are based in Moscow, therefore special tools from world-made leaders come to us directly from America, Asia and Europe. In addition, our specialists have many years of experience of equipping a hundred. They know that the speed and productivity of labor depends on the correct and rational selection of instruments for the car service. And the opposite situation will make the work of masters more burdensome, and it is often impossible at all. Based on this, we have made every effort to form our range of the most necessary, high-quality and reliable tools for the service station. We are not the first year to sell their sales, and therefore we can guarantee the following:

you can buy tools from proven manufacturers who have proven themselves not only in foreign, but also in the domestic market, and comply with Russian ideas about convenience and security;
our specialists are always ready to advise you and assist in choosing tools that will make the work of masters in a car service efficient, comfortable and high-yield;
direct contracts with manufacturers make it possible to establish attractive prices on products without prejudice to the quality of the goods itself and the additional service we offer;
we are constantly updating the range of tools for car service and follow the innovations of the industry, therefore, in the course of the last trends and we are simply divided with them with you, offering only modern products;
in addition to universal components, we will find highly specialized tools that will allow you to expand the range of services provided, attract new customers and get a unique advantage over competitors;
we only work with proven manufacturers and carefully track their reputation and responses to the tools produced by them for car service, because we are not all as much as you have to enjoy our customers.

The reserve of tools in our warehouse is constantly updated and complemented, and you can track all changes in the catalog of our online store. If you did not find what they were looking for, let us know our specialists about it, and we will try to help you. Tools are justified, and high-quality tools are an excellent opportunity for the development and long-term prosperity of your business.