Our article today is dedicated to car owners Daewoo Nexia, or rather, how the replacement is made independently cabin filter Nexia.

Air filter elements on Daewoo car Nexia are located under the hood in the main air conditioning compartment and in the air intake heating system. They reduce concentration harmful substances in the air inside the cabin several times.

When they become dirty, the car owner begins to smell a burning smell in the cabin, the windows also quickly fog up and the heater does not blow well. On this car two filter elements are installed.

Removing and replacing the Nexia cabin filter (Daewoo Nexia)

Removal and replacing the Nexia cabin filter, more precisely on the Daewoo Nexia, it begins with removing the rubber seal, then unscrewing the bolts on the plastic lining. To do this, you only need a Phillips screwdriver.

Now you need to carefully bend the round rubber compressor and pull out old filter.

Cabin filter Article - 9.7.199. It is flat and round in shape. His seat must be cleaned. We insert new filter and return the rubber seal to its place.

The next step is to replace the rectangular cabin filter. It is located immediately behind the round filter.

We take it out, vacuum it or blow out the air duct niche with foil, and insert a new filter element.

Difficulties often arise because inserting rectangular filter the partition is in the way. It can be cut off, or the filter itself is cut in the middle, which increases its flexibility, making it easier to install in a niche.

Finally, you need to assemble all the structural elements of the compartment. They should fit tightly, without backlash. At this point, all actions to replace the Nexia cabin filter can be considered complete.

Removing and replacing the cabin filter Nexia Video

Save

Although it has been out of production for a long time, it comes across quite often on our roads. During the zenith of its fame, it earned the title of “people's car” for its beautiful ride quality, stylish appearance and accessibility. Some of its versions were equipped with air conditioning, allowing you to enjoy the coolness of the car on the hottest day.

For the air conditioner to function properly, clean air is necessary, since the air in the cabin is repeatedly distilled through the evaporator. It is at this stage important role plays, which prevents debris, dust and contaminants from entering the machine.

There are filter models that are additionally equipped with filter membranes with antibacterial coating and chambers with carbon filler - an excellent adsorbent.

It is noteworthy that basic versions The cars were not equipped with a cabin filter at all, although there is a standard seat for it.

Stages of replacing (installing) the cabin filter

For the procedure we do not need special tool– a screwdriver and a knife are enough.

To complete the process correctly, you must follow the following steps:

• open the hood and remove the filter protection. To do this, you need to unscrew the mounting screws, which are covered with decorative plastic plugs. Using a 12mm wrench, we also tighten the nut that secures the windshield wiper cable;

• carefully remove the seal that hides the plastic latches securing the protective casing. We dismantle the box;

• we gain access to the standard mounting socket of the cabin filter. It is not very suitable for replacing the filter element, as it has an unnecessary partition. Some car enthusiasts advise eliminating it mechanically, but we in this case let's cut a little air filter and easily install it into the mounting socket;

• do not forget that after installing the cabin filter we will not be able to use the moving flap that regulates the flow warm air from the stove. Most often, the filter is installed for the spring-summer period of operation. vehicle when the damper is not in use.

Air filter replacement video

You can watch a short video fragment phased replacement(installation) of the cabin air filter Daewoo car Nexia.

A cabin filter is an element of a car that helps clean the air in the cabin while the vehicle is in use. If at any point the driver or passengers begin to feel unwell and find it difficult to breathe, then the problem is in the cabin filter.

An almost failed element is no longer able to cope with its responsibilities related to air filtration in the cabin, and it needs to be replaced.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

An interesting fact is that when creation of Daewoo Nexia manufacturers did not plan to install purifiers in the cabin. However, after several updates, it was decided to equip the car with air conditioning and a cabin filter.

Where is the filter located?

In the majority foreign models The cabin filter can be found behind the glove compartment. But Daewoo manufacturers Nexia distinguished themselves and installed the part in the main compartment of the air conditioning system. Therefore, to get to the filter, you will have to work a little.

The price for an original cabin filter for this vehicle model is 350 rubles. Filter article number – 28828822. In addition to the original element, there are analogues that can also be used when replacing it. The most popular options along with the cost are shown in the table.

Manufacturing company	vendor code	Cost, in rubles
TSN	97110	120
Big Filter	GB9922	300
Fortech	FS132C	250
AMD	AMDFC54	200
3F QUALITY	E2533	250

Replacing the cabin filter

You can replace the cabin filter yourself, saving a significant amount of money that you would have to spend when visiting the station Maintenance. If you wish, you can watch a video of installing a new filter.

Tools

Before talking about replacement, you should clarify which tools can be used to do this. To carry out the procedure you will need to stock up on:

• with a knife;
• screwdriver;
• new cabin filter.

Also, experienced car enthusiasts note that replacement work requires careful and careful execution, since not only the cabin filter will be affected, but also the air conditioning system in which it is located.

Replacement steps

The replacement sequence consists of several steps:

Step 1. First of all, you will need to remove the system seal. To do this, use a screwdriver to unscrew the screws that secure the plastic cover. You also need to remove the visor. After this, the pad can be easily removed, and the plate itself can be moved to the side. This will open the way to the old filter, which will need to be dismantled.

Step 2. Then you can begin installing the new element. It must be inserted horizontally. A rubber seal should be attached to the top of the filter, facilitating reliable fixation and preventing dirt from penetrating into the interior.

Step 3. When installation work new part are completed, it will be necessary to reassemble the air conditioning system structure. At the same time, you need to ensure that every detail falls into place. If any element becomes loose, it must be reinstalled.

What about a rectangular filter?

If a rectangular filter is used as a replacement element, its installation will be slightly different. For successful installation, you will need to unscrew several additional screws holding the trim and visor, and also cut off the partition with a knife.

The partition is located in the rectangular opening of the air collector, where the filter will subsequently be installed. The advantage of such installation is that it reduces the risk of damage to other structural elements of the car.

Why is it important to replace the filter promptly?

If you do not change the cabin filter in time, it can affect the performance of other devices and systems of the car, worsening them general state. Thus, the service life of each element will be noticeably reduced, and already in soon If the cabin filter fails, the systems and devices in use will also stop working. The result of ignoring timely replacement It will be an expensive repair.

Also, a poorly functioning cabin filter can harm passengers and the driver. The fact is that this part prevents toxic substances, dust and other suspended particles from entering the cabin. Thus, the old filter will turn out to be a bad obstacle, and all toxic substances will penetrate inside the cabin, poisoning the air. The respiratory organs of all people sitting in the car will suffer.

As a result, it should be said that the cabin filter is a very important detail, which in Daewoo Nexia is recommended to be replaced every 10-20 thousand kilometers.

Diameter 175mm, height 10mm.

Purpose cabin filters– preventing dust, pollen, soot and other pollutants from entering the vehicle cabin. It is recommended to change the filter more often. This especially applies to filters for Daewoo Nexia. These filters are inexpensive and need to be changed more often. Replacing labor won't be much.

It is better to use active carbon filters. They provide additional protection from transport and industrial emissions. Benzene concentrations in the cabin can be up to 4-6 times higher than outside. The activated carbon cabin filter protects passengers from unpleasant odors. The filter also prevents dirt from accumulating on inside window.

A quality cabin filter helps ensure good view from your car ( dirty filter causes the cabin to fog under certain conditions). Clean cabin air promotes the overall well-being of the driver and passengers, thereby ensuring safe driving.

Daewoo Nexia is the successor to the Opel Cadet. Since 2002, the second generation Nexia has been produced in Uzbekistan - Uz Daewoo Nexia. It is characteristic that the factory did not initially plan to install any filters. It was later, when the need for air conditioning the interior arose, that engineers came up with an original solution. They found a place for installation: in the air intake of the heating system and the main air intake compartment. A round filter was made for the heating compartment, and a filter of the appropriate size was selected for the air conditioning compartment.

Instructions for replacing the interior tire yourself Daewoo filter Nexia + photos and videos

Here's what's under the hood (Figure 1). You have to remove the rubber partition pad engine compartment(red dotted line), remove the plastic cover and the waterproof plastic visor that covers the air intake compartment.

Rice. 1 Replacing the cabin filter on a Daewoo Nexia

Remove the plastic cover (3 screws) and the plastic visor (Fig. 2)

Rice. 2

Under the visor we will see the cabin filter (if there is one) and we will see the rubber seal of the cabin heating air duct compartment. (Fig. 3)

Fig.3

Bend the rubber seal and remove the round filter (Fig. 4)

Fig.4

This is how this filter is correctly positioned (Fig. 5)

Fig.5

We change these filters. It is better to replace filters with an assistant. Inserting filters is somewhat difficult. Most likely, in new models, cabin filters will be located in a place familiar to many models - under the glove compartment.

Also watch the video on replacing Daewoo DIY Nexia:

Daewoo Nexia cars are quite common on our roads. Some of them are equipped with air conditioning to maintain a pleasant microclimate in the cabin. But for efficient work Air conditioning systems are critical and ensure the purity of the circulated air. After all, the atmosphere in the salon should not just be cool, it should also be clean. But the cleanliness in the cabin of your Daewoo Nexia is regulated by a special design - a cabin air filter. It not only allows the air conditioner evaporator to work efficiently, but also protects your health and the health of your passengers.

A good cabin filter from leading manufacturers for Daewoo Nexia will be equipped not only with an antibacterial layer, but also with a special layer with carbon filler, which has very strong absorption properties.

A filter with such a carbon filler will not only trap dust and dirt particles from the road, but also trap harmful odors and neutralize the toxic exhaust of your neighbors on the road.

It is curious that some of the models Daewoo Nexia, is not initially equipped with cabin filters, but you can find them on automotive markets sometimes poses a problem. However, this task is quite doable, and you can purchase a cabin filter for Daewoo Nexia in the store, which will look something like this:

You may want to combine replacing the cabin filter on your Daewoo Nexia with the procedure regular maintenance air conditioner

Step-by-step instructions for replacing the Daewoo Nexia cabin filter

In order to gain access to the cabin air filter of the Daewoo Nexia model, you need to remove two plugs that are located on the front windshield trim. Under them there are self-tapping screws that need to be unscrewed. In addition, the glass trim is also secured by a nut that secures the windshield wiper arm. It can be unscrewed with a size 12 wrench.

In the next step, remove the seal rubber band located along the perimeter of the engine compartment. Directly below the sealing tape there are brackets that press against a plastic structure that serves to drain the flow of water. We remove the brackets and carefully remove the structure - the casing. Now we have a groove in front of us in which to install the cabin air filter.

The installation location for placing the cabin filter on the Daewoo Nexia is not very well located. The placement of the element is hampered by a partition.

In order to place the replacement cabin filter element in the seat, you can cut off the partition, but we recommend that you slightly cut the air filter in its middle part. So flexibility replaceable element the size of the filter will noticeably increase and you can place it in the seat without any problems.