New in 2010. Reliable car security system with interactive authorization, individual encryption keys. Designed to work in conditions of extreme urban interference. Dialog code control with individual encryption keys 128 bits long eliminates intelligent electronic hacking, resistant to all existing code grabbers. To protect the code, the most advanced dialog coding algorithm is used at the moment, as well as an innovative frequency hopping method.
Features StarLine B92 Dialog
- Dialogue control code with individual encryption keys
- Automatic link control
- Intelligent autorun
- Multi-channel radio path providing increased range and noise immunity in urban environments
- The maximum range of the main key fob in transmitter mode is 800m (declared by the manufacturer)
- The maximum range of the main key fob in pager mode is 2000m (declared by the manufacturer)
- Possibility of joint work with GSM-modules StarLine Space, StarLine Messenger M20 and StarLine Messenger GPS M30
- Turbo timer mode
Complete set StarLine B92 Dialog
| 1.Installation instructions | 1 PC. |
| 2. Instruction manual | 1 PC. |
| 3. Memo | 1 PC. |
| 4. Warranty card | 1 PC. |
| 5. Keychain remote control with feedback and LCD display | 1 PC. |
| 6. Central processing unit | 1 PC. |
| 7. Transceiver module with antenna | 1 PC. |
| 8. Key fob without LCD display | 1 PC. |
| 9. Two-level shock sensor | 1 PC. |
| 10. Key fob battery with LCD display | 1 PC. |
| 11. Hood button | 1 PC. |
| 12. Temperature sensor with 2-pin cable | 1 PC. |
| 13. Service button | 1 PC. |
| 14. Shock sensor cable | 1 PC. |
| 15. LED indicator | 1 PC. |
| 16. Motor temperature sensor connection cable | 1 PC. |
| 17. Transceiver cable | 1 PC. |
| 18. Power cable for power supply and engine start circuits | 1 PC. |
| 19. Main cable with 18-pin connector | 1 PC. |
| 20. Wires for connecting limit switches | 2 pcs. |
| 21. Central locking cable with 6-pin connector | 1 PC. |
car manufacturers
recommend car alarm
StarLine B92 Dialog Flex for installation on your car
New in 2011. Reliable car security system with flexible service channels, interactive authorization, individual keys 128 bit encryption and smart autorun function. Designed to work in conditions of extreme urban radio interference. Designed to protect cars of medium and high price range as part of security complex StarLine "Win".
StarLine has everything you could want plus:
Dialogue Authorization eliminates intelligent electronic hacking and provides resistance to all known code grabbers. To protect the code, the currently most advanced conversational coding algorithm with individual 128-bit encryption keys, as well as the innovative frequency hopping method, were used. When transmitting commands, the transceiver repeatedly changes frequencies according to a special program in the period of each message. A solution of this level, known by the technical term "frequency hopping spread spectrum", is the first in the world to be used in an alarm control system and is a very significant complication of any attempts to crack the code. The "dialogue" encryption code is used both in the main and in the additional key fob.
The security of the code is confirmed by StarLine's long-term contract for 5,000,000 rubles for specialists in electronic hacking.
Megapolis mode. Increased range of control and notification, as well as confident operation in conditions of extreme urban radio interference is ensured by the use of a 512-channel narrow-band patented OEM transceiver with frequency modulation. A specialized signal processing program, narrow-band filters, as well as receiving and transmitting channels optimally distributed along the edges of the 433.92 MHz frequency range allowed us to improve the signal-to-noise ratio by 8-10 dB and double the control and warning range. Forget about radio interference in large parking lots.
Automatic control of the communication channel. Provides verification of the presence of the key fob in the coverage area of the alarm transceiver and guarantees the receipt of alarm signals from the car. If necessary, you can select the frequency of transmission of communication channel control signals on the air every 3, 5, 7 minutes or temporarily disable the channel control.
Intelligent autorun. The engine is started and warmed up by temperature, alarm clock, time intervals or remotely using a key fob.
START/STOP button. StarLine B92 Dialog Flex is ideally compatible with cars equipped with a start/stop button.
Ergonomic and reliable keychain. The keyfobs have an innovative design and hidden antenna location. This allows you to increase the reliability of the key fob design and implement an ergonomic control method. The new 4-button control interface adopts the "master button" principle. The easy-to-find main button performs the main signaling command - arming. All menus are Russian-language with clear icons.
Additional functions:
- Battery charge control by voltage;
- The choice of volume and melody keychain;
- Adjusting the volume of sound signals for arming and disarming confirmation.
Thermal resistance. Security systems with StarLine dialogue protection are developed and manufactured in Russia and are designed to work in wide range temperatures from - 45 to +85.
Benefits of StarLine B92 Dialog Flex
Thanks to flexible service channels, a number of additional service functions can be implemented.
Anti-theft features:
Alarms StarLine Flex allow for easier installation and implementation of additional service functions without the use of external components.
Enhance anti-theft features:
- Connecting a digital wireless interlock relay StarLine R2 ;
- Addendum GSM/GPS module StarLine using just one connector.
Commands in armed and alarm modes:
- Management of additional door locks;
- Additional blocking of the engine (imitation of a malfunction);
- Opening the trunk with the standard alarm off;
- Bonnet lock control (closing);
- Turn on the light alarm when connected to an alarm.
Comfort features.
- Remote control of the starting heater;
- Automatic installation of seats for the owner;
- Automatic return of the steering column to its original position (folding);
- Automatic switching on of the dipped headlights when the car is moving (by lowering hand brake, pressing the brake pedal).
On autorun:
- Turning off the wipers, radio for the duration of the autorun;
- Switching on seat heating and glass heating for the duration of the autorun;
- Imitation of signals of "intelligent" ignition locks;
- The second impulse to turn off the ignition in case of unsuccessful autostart on vehicles with a Start / Stop button;
- Simulation of the second starter signal.
When the security mode is turned on:
- Automatic folding mirrors;
- Automatic closing of the hatch;
- “Light” path after arming.
A full range of standard and programmable features provide the car owner reliable protection and comfort when using the StarLine B92 Dialog Flex car security system.
Security and service alarm functions can be changed using service button and key fob without the need to access the central unit. The list of functions is shown in the table below.
The programming order is as follows:
- With the ignition off, press the service button 5 times.
- Turn on the ignition. The siren will sound 5 times to confirm entering the programming mode.
- Press the Starline B92 Dialog Flex alarm service button to move through functions from 1 to 16.
Each short press of the service button selects the next function by number. After selecting function 16, when you press the button again, the system will go back to programming the first function.
A long press of the service button allows you to select functions in reverse order.
The number of the selected function and its mode of operation are displayed on the display of the main remote control, as well as the corresponding LED flashes and siren signals. The interpretation of the siren signals and flashes is given in the table below:
Function Briefly press the service button Siren and LED signal №1 1 time 1 short №2 2 times 2 short №3 3 times 3 short №4 4 times 4 short №5 5 times 1 long №6 6 times 1 long + 1 short №7 7 times 1 long + 2 short №8 8 times 1 long + 3 short №9 9 times 1 long + 4 short №10 10 times 2 long №11 11 times 2 long + 1 short №12 12 times 2 long + 2 short №13 13 times 2 long + 3 short №14 14 times 2 long + 4 short №15 15 times 3 long №16 16 times 3 long + 1 short - Within 15 seconds, press one of the remote control buttons, depending on the desired state of the programmable function. In confirmation, 1, 2, 3 or 4 beeps of the siren and key fob will follow. The programmable function number and the new programmed state will be displayed on the keyfob display. Button 1 selects two options for the function, depending on the type of pressing the button - short (1st option) or first long, then short (4th option). Buttons 2 and 3 program options 2 and 3 respectively.
- To exit the car alarm programming mode, turn off the ignition or
wait for the system to exit automatically. In confirmation will follow
5 flashes of light signals.
Table No. 1 programmable security and service functions of the Starline B92 Dialog Flex alarm
| Programmable function | Single pressing buttons 1 |
Single button press 2 | Single button press 3 | Long + short press button 1 |
| 1 signal | 2 signal | 3 signals | 4 signals | |
| No. 1 - pulse duration door lock control |
0.8 / 0.8 sec | 3.6 / 3.6 sec | double pulse locking 0.8 / 0.8 sec |
comfort 30 / 0.8 sec |
| No. 2 - automatic door lock control |
close from the pedal brakes/ open from ignition |
from ignition closed/open (delay 10s) |
only close. from ignition (delay 10s) |
disabled |
| No. 3 - salon light bypass and activation delay sensors when turned on protection |
before shutdown illumination salon (60 sec Max.) |
without delay | 30 sec | 5 sec |
| №4 — automatic switch on security mode and additional sensor signal processing algorithm | With locking castles |
With locking castles |
without locking castles |
without locking castles |
| 2 tier add. sensor |
two 1-level add. sensor |
2 tier add. sensor |
two 1-level add. sensor | |
| No. 5 - automatic mode switching protection |
With locking castles |
without locking castles |
disabled | |
| No. 6 - the volume of the siren confirmation signals | maximum | average | minimum | disabled |
| No. 7 - light indication open doors |
10 sec | 20 sec | 30 sec | disabled |
| No. 8 - output operation algorithm power-on lock anti-robbery mode |
at inclusion brakes |
at inclusion anxiety |
anti-robbery mode switched off |
|
| No. 9 - personal PIN - alarm deactivation code | 1 digit factory pin code = 3 |
1 digit pin |
2 digit pin |
3 digit pin |
| No. 10 - activation of outputs on engine blocking |
NZ | HP | NZ jointly with relay R2 |
HP together with relay R2 |
| No. 11 - 2 step shutdown engine blocking |
disabled | included | ||
| No. 12 - algorithm additional channel №4 (blue wire) |
1-120 sec at inclusion protection |
1-120 sec at off protection |
1-120 sec at incl. and off. protection |
1-120 sec at off ignition or protection |
| No. 13 - algorithm additional channel №1 (yellow-black wire) |
0.8 sec (open trunk) |
1-120 sec (with off shock sensor) |
1-120 sec (without off sensor hit) |
latch (on/ off key fob) |
| No. 14 - algorithm additional channel №2 (yellow-red wire) |
0.8sec (2-x stepper unlocking castles) |
1-120 sec (with off shock sensor) |
1-120 sec (without off sensor hit) |
latch (on/ off key fob) |
| No. 15 - algorithm additional channel №3 (yellow-white wire) |
Impulse 3 sec after 2 sec after stopping engine |
Impulse 1 sec after 1 sec after stopping engine |
duplication light signals (Mode 1) |
duplication light signals (Mode 2) |
| No. 16 - period automatic channel control |
off | 3 min | 5 minutes | 7 min |
Factory settings are highlighted in gray in the table.
Attention. Resetting to factory settings an already installed and working alarm may make it impossible to
remote and auto start engine, as well as the impossibility of starting the engine in normal mode due to a change in the type of blocking from NO to NC.
Setting up and programming the Star Line B92 Dialog Flex car security system can be done immediately after installing the car alarm at the Phasis Orbita Service technical center.
Starline
Installation of car alarms StarLine A2
Installation of car alarms StarLine A4
Installation of car alarms StarLine A6
Installation of car alarms StarLine A8
Installation of car alarms StarLine A9
Installation of car alarms StarLine B6
Installation of car alarms StarLine B6 Dialog
Installation of car alarms StarLine B6 Dialog CAN F5 V100
Installation of car alarms StarLine B6 Dialog CAN F5 V200
Installation of car alarms StarLine B62 Dialog Flex
Installation of car alarms StarLine B9
Installation of car alarms StarLine B9 Dialog
Installation of car alarms StarLine B9 Dialog CAN F5 V100
Installation of car alarms StarLine B9 Dialog CAN F5 V200
Installation of car alarms StarLine B92 Dialog Flex
Installation Instructions (Technical Specifications and Package Contents)
Recommendations for installation, placement and connection
Connecting various circuits
Service function programming
Description of programmable functions
Programming engine start parameters
Description of programmable engine start functions
Recording keyfob codes
Command tables and key fob batteries
Operating instructions (Security and service functions of the alarm system)
Car alarm control keyfobs
Setting the functions of the alarm key fob
Programming operating modes using the cursor method
Activation of alarm security modes
Alarms
Power failure protection
Additional sensors
Anti-robbery mode
Panic mode
Immobilizer mode
Description of signaling service functions
Turbo timer mode
Remote engine start
Changes in the StarLine B92 Dialog signaling functions that appeared in the Flex version (Supplement to the installation instructions)
Installation of car alarms StarLine B94 Dialog
Installation of car alarms StarLine С4
Installation of car alarms StarLine C6
Installation of car alarms StarLine С9
Installation of car alarms StarLine 24V
Installation of motor alarm StarLine Moto V5, alarms for motorcycles
"Operating manual Thank you for choosing the StarLine B92 Dialog car security system and wish you successful and safe travel! Edition No. 1 ... "
user manual
Thank you for choosing
car security system
StarLine B92 Dialog
We wish you successful and safe travels!
Edition No. 1
StarLine B92 Dialog
READ PLEASE
ATTENTIVELY!
The car alarm must be installed
qualified specialists. car alarm
is complex technical device, suggesting
connection to vehicle circuits related to engine operation.
If an icon appears on the key fob display warning about the low battery of the key fob, take measures in advance to replace the battery. We recommend that you store a new spare battery in the vehicle, keeping its original packaging.
Read carefully this manual, special attention (ATTENTION!).
attention to sections marked with Mandatory measures safety when using the engine start function It must be remembered that the car is a means of heightened danger. Section 12.8. rules traffic reads: “The driver may leave his place or leave the vehicle if he is accepted necessary measures, excluding spontaneous movement vehicle or use it in the absence of the driver.”
Before use StarLine car alarms B92 Dialog, carefully read the precautions for safe use of the remote or automatic engine start function below.
user manual
1. Always park your vehicle in an open, well-ventilated area.
2. Always park your car on parking brake, which must be in good condition and exclude the possibility of movement of the car.
3. When leaving the vehicle, be sure to set the control lever automatic transmission in the “PARK” position and the manual transmission shift lever in the neutral position.
4. If your vehicle uses a manual transmission, then before enabling the remote or automatic engine start function, be sure to follow the procedure for preparing to start the engine - “soft neutral”.
5. Never pass car alarm control fobs to children, as well as to other persons without first reading the instruction manual.
6. On cars with a manual transmission, it is not recommended to start the engine remotely or automatically if the car is out of sight and the car alarm user is not able to control the engine start process.
7. Before enabling the remote or automatic engine start function:
Make sure the car is in good condition;
Check availability enough fuel, oil, coolant, etc.;
Set the operation parameters of the interior heater (air conditioner), glass heating and other accessories to the required levels;
Set the airflow control to circulate air to heat or cool the vehicle more efficiently.
StarLine B92 Dialog
Contents of delivery
Specifications
Security and service alarm functions
Alarm control using key fobs Alarm control key fobs
The duration of pressing the remote control buttons
Key fob commands
LCD key fob display
Indication of active modes and functions
Alarm and car status indication
Main key fob function menu
Programming operating modes using the cursor method
List of modes programmed by the cursor method
Security and anti-theft functions car alarms Arming with sound confirmation signals
Arming without sound confirmation signals
Silent security activation
Automatic arming
Arming with the engine running
Remote engine stop without disarming......32 Arming without a key fob
Automatic return to armed mode
Interior light bypass (sensor activation delay)
Self-diagnosis when arming
Disarming with audible confirmation signals
Disarming without sound confirmation signals
Disarming without using a key fob
Disarming with the engine running
Self-diagnosis when disarming
Alarms
Power failure alarm protection
Additional sensors
Operating instructions Additional wireless interlock relays
Connection of information retrieval GSM modules
Anti-robbery mode
Enabling anti-robbery mode with a key fob
Hidden activation of the anti-robbery mode
Disabling anti-robbery mode
Panic mode
Immobilizer mode
Disabling engine blocking in immobilizer mode
Alarm service functions Control of the vehicle condition, battery voltage and interior temperature...53 Search for a car in the parking lot and control of the engine temperature....................54 Temporary deactivation of the shock sensor
Temporary disablement of the additional sensor
Automatic control of door locks
Remote control of door locks
Additional channel control #1
Additional channel control #2
Additional channel control #3
Additional channel control #4
Turbo timer mode
Switching on the turbo timer
Call from the car
Light indication of open doors
Battery charge control of key fob with LCD
Checking the health of limit switches
Mode after-sales service
Alarm View Function
Automatic link control
Controlling the number of key fobs recorded in the system
Key fob button lock
Personal emergency deactivation code
Input algorithm personal code
Recording keyfob codes
StarLine B92 Dialog
Remote engine start Features of remote engine start
Preparing for remote start on vehicles with manual transmission......................75 Switching on soft neutral
Remote engine start key fob
Remote engine stop
Remote engine extension
Automatic engine start
Automatic engine start by alarm
Intermittent engine start
Automatic engine start based on temperature
Programming of functions Programming of security and service functions (table No. 1) ............... 84 Programming of engine start parameters (table No. 2) .............. ..86 Remote control batteries and their replacement
user manual Introduction StarLine B92 Dialog is a modern car security system.
The protective properties of the system are implemented using innovative technologies.
To transfer control commands to StarLine B92 Dialog, a unique "Quick Dialogue" authorization algorithm with a crypto-resistant code and an encryption key individual for each product is used, which excludes intelligent electronic hacking.
– – –
StarLine B92 Dialog Delivery set 1, 2 - installation and operation instructions;
3, 4 - memo and warranty card;
5 - remote control key fob with feedback and liquid crystal (LCD) display;
6 - central processing unit;
7 - transceiver module with antenna;
8 - remote control key fob without LCD display;
9 - two-level shock sensor;
10 - battery for key fob with LCD display;
11 - hood button;
12 - temperature sensor with 2-pin cable;
13 - service button;
14 - shock sensor cable;
15 - LED indicator 16 - engine temperature sensor connection cable 17 - transceiver cable;
18 - power cable for power supply and engine start circuits;
19 - main cable with 18-pin connector;
20 - wires for connecting limit switches;
21 - central lock cable with 6-pin connector;
user manual StarLine B92 Dialog Specifications
Radio control carrier frequency.. 433.075 to 434.775 MHz
Number of frequency control channels
Maximum range of the main key fob
In the mode of sending commands to the signaling unit
In the mode of receiving signals from the signaling unit .................... 2000 m *
The maximum range of the additional key fob .............. 15 m *
Impact sensor type
Working temperature
DC supply voltage
The current consumed by the alarm in armed mode .... no more than 25 mA
Maximum admissible current at the exits:
Connectionssiren
Light connections
Control of electric drives of door locks
Switching on the ignition
Inclusions of accessories
Starter activation
Built-in engine lock
Engine lock control
Additional control channels
Keyfob LCD power supply: .......... 1.5V (1 AAA battery)
Additional keyfob power supply: ...3V (1 "CR2450" battery) * The range of the keyfobs may decrease depending on the location of the transceiver, the location of the car and the user, radio frequency interference, weather conditions, voltage car battery and voltage of the key fob battery.
StarLine B92 Dialog is approved for use on the territory of the Russian Federation and meets all the requirements of regulatory documents of the Russian Federation.
The service life of StarLine B92 Dialog is 5 years, provided that the product is installed and operated in accordance with the installation and operating instructions.
operating instructions Security and service functions of the alarm Security zones of the car and methods of their control
Engine - blocking relay, StarLine RD02 digital radio relays (option)
Doors, hood, trunk, parking brake - limit switches
Ignition - ignition circuit control input
Body - two-level shock sensor
Interior space - additional sensor (option) Security alarm
Dialogue control code "Quick Dialogue" with individual encryption keys eliminates intelligent electronic hacking
Patented 512 channel narrowband transceiver provides reliable performance in urban interference
Remembering the initial state when the power is turned off and return to the same state when the power is restored
Interruption of alarms without disarming
Limiting the number of alarm cycles from sensors
Automatic control of the communication channel Protective and anti-theft alarm functions
Security mode with sound and light alarms
Sending alarm signals to the key fob with LCD display (main key fob)
Silent arming/disarming
Silent guard mode
Guard mode with running engine
Enabling / disabling the security mode without using the key fob
Automatic return to armed mode in case of accidental shutdown
StarLine B92 Dialog
Automatic arming
Immobilizer mode
Anti-robbery mode
Panic mode
Programmable personal emergency shutdown code
Engine blocking and its preservation when dismantling the alarm
Programmable 2-step deactivation of engine locks Self-diagnostics and indication of operating modes
Indication of a faulty zone when arming
Indication of alarm triggering reasons for 9 security zones
Indication of the alarm status by the LED and on the key fob display
Indication of the fact of alarm activation by sound signals
Automatic control of security sensors with disconnection of faulty ones and a message about disconnection
LED indication of health limit switches
Keychain with intuitive display
Comfortable backlight display 3 different sound modes and vibration mode of the key fob
View alarm history Alarm service functions
Bypassing the door zone for the delay time of the cabin light going out
Selecting the volume of the arming / disarming signal
Remote shutdown of the shock sensor and additional sensor by levels in armed mode
Remote control central lock
Control of the central lock from the ignition switch
Two step door unlocking
Two-impulse locking of door locks 4 channels for controlling additional equipment
Vehicle battery voltage monitoring instruction manual
Separate temperature display in the cabin and under the hood of the car
The possibility of implementing the "comfort" function
Car finder function
Light signaling of open doors
Turbo timer mode
Remote programming of functions and key fobs
Service mode
Car interior lighting control
Call mode from the car (search key fob)
Protection against accidental pressing of remote control buttons
Programming new and erasing lost key fobs
Current time indication, alarm clock, countdown timer
Indication of discharging the battery of the main remote control
Ability to work with GSM modules StarLine Space, StarLine Messenger M20 and StarLine Messenger GPS M30 Engine start functions
Remote start/prolong operation/stop the engine
Automatic engine start by temperature, alarm, periodic start every 2, 3, 4 or 24 hours
Remote engine start on vehicles with start/stop button
Choice of engine type: petrol/diesel
Choice of transmission type: automatic / manual
Control of engine operation by signals from a tachometer, generator or on-board network voltage
Automatic starter overwind protection when starting the engine
Indication of the remaining time of the running engine on the display keychain StarLine B92 Dialog Alarm control using keyfobs Alarm control keyfobs The system is equipped with two control keyfobs.
Main key fob: Additional key fob:
4-button keyfob with feedback 3-button keyfob and liquid-crystal display without display (LCD) The main and additional keyfobs are equivalent in terms of cryptographic resistance.
To transmit control commands in both key fobs, a special encryption algorithm "Quick Dialogue" is used, which excludes intelligent electronic hacking.
Information about the state of the security system is transmitted to the main key fob when
Sensor triggering and alarm occurrence
Execution of commands transmitted from other key fobs
Changing operating modes and alarm functions.
At the same time, the current state of the alarm is displayed on the display, sound, vibration signals and the display backlight are turned on.
In addition, the key fob LCD displays information about the current time, the alarm clock, the timer, the battery voltage, the temperature of the engine and the car interior.
user manual In order to get the most out of the possibilities provided by the security system, we recommend using the main remote control.
Duration of key fob button presses In this section and below, the following definitions of the duration and sequence of key fob button presses are used:
Short press - one press of a button (or two buttons) lasting less than 0.5 seconds.
Long press - pressing and holding a button or two buttons until a melodic sound signal appears.
Double press - two presses of the same button within 1 second.
Sequential pressing - two pressings of one or different buttons. The first press should be long (until the sound signal appears), the second press should be short (after releasing the first button).
– – –
StarLine B92 Dialog Key fob LCD display AND Indication of active modes and functions Automatic alarm start mode
– – –
Indication of the alarm and vehicle status Security mode with audible alarms is on Silent security mode is on Door locks are closed Door locks are open Ignition is on Doors, hood, trunk are open Parking brake is not applied (pressed foot brake) The engine is running Anti-theft mode is on The keyfob battery needs to be replaced Engine temperature Any StarLineGSM/GPS module is connected Alarm clock is on Timer is on sensor The 1st level of the shock sensor was triggered The 1st level of the additional sensor was triggered The 2nd level of the shock sensor was triggered The 2nd level of the additional sensor was triggered The 1-level additional sensor No. 1 was triggered The 1-level additional sensor No. 2 was triggered
StarLine B92 Dialog
Main key fob function menu
The function menu of the main key fob allows you to:
Set current time
Set alarm time
Turn the alarm on or off
Set countdown timer time
Enable or disable the timer
Select alarm volume or silent mode
Select the type of sound signal
– – –
If no buttons are pressed within 8 seconds, the key fob functions programming mode will be automatically exited.
StarLine B92 Dialog Programming operating modes using the cursor method Separate alarm operating modes, as well as some special functions, are programmed (turned on or off) using the cursor method. The enabled state of any of the modes is indicated by the constant illumination of the corresponding icon in the lower part of the key fob display.
Programming is possible both when the security mode is off and when it is on.
For programming, follow these steps:
– – –
After 2 beeps, the first icon on the left will be highlighted in the lower part of the screen:
By short pressing the buttons 2 2 (left) or 3, 4 (right) move the flashing cursor to the desired icon:
– – –
If no button presses are made within 5 seconds, the programming mode will be automatically exited using the cursor method.
StarLine B92 Dialog List of modes programmed by the cursor method Automatic alarm start mode.
Allows you to automatically start the engine at the time programmed on the alarm clock.
Automatic periodic start mode.
Allows you to periodically start the engine every 2, 3, 4 or 24 hours (depending on the choice).
Automatic temperature start mode.
If the engine temperature drops below the set threshold, the engine will automatically start to warm up for the set time.
Service mode. Designed to temporarily disable the security and anti-theft functions of the alarm if it is necessary to transfer the car for service or repair.
Turbo timer mode. Designed for cars with turbocharging and allows you to keep the engine running after the ignition is turned off for some time, necessary to reduce the turbine speed.
Automatic arming mode. Security is activated automatically after the ignition is turned off and 10 seconds after all doors are closed.
immobilizer mode. In this mode, the engine is automatically blocked 30 seconds after the ignition is turned off.
For more information about the operation of these modes, see the relevant sections of the manual.
– – –
Security and anti-theft functions of car alarms Arming with sound confirmation signals Before arming, make sure that
Ignition off
Parking brake on
Doors, hood and trunk closed
– – –
If the doors, hood, trunk turn out to be poorly closed, and the parking brake is not tightened (or the foot brake is pressed), or one of the door, hood, trunk limit switches is faulty (permanently closed), then the alarm system will warn about this with 4 siren signals and 4 light signals (See "Self-diagnosis when arming", page 34).
StarLine B92 Dialog Arming without sound confirmation signals Before arming, make sure that
Ignition off
Parking brake on
Doors, hood and trunk are closed Press button 1 on the key fob first 1 for a long time (until a beep sounds), then briefly
– – –
If the doors, hood, trunk turn out to be poorly closed, and the parking brake is not tightened (or the foot brake is pressed), or one of the door, hood, trunk limit switches is faulty (permanently closed), then the alarm will warn about this with 4 light signals (see. " Self-diagnostics when arming”, page 34).
– – –
Enabling silent security In the silent security mode, when any of the security sensors is triggered, the car siren signals are absent.
The state of "alarm" is accompanied only by light signals.
– – –
1 light signal will sound 1 signal
The door locks will close, the on indication will appear.
If the doors, hood, trunk are poorly closed, and the parking brake is not tightened (or the foot brake is pressed), or one of the door, hood, trunk limit switches is faulty (permanently closed), the alarm will warn about this 4 light signals (see "Self-diagnosis when arming", page 34).
StarLine B92 Dialog Automatic arming To use this mode using the cursor method (see page 24) “turn on” the icon on the key fob display.
With the doors closed, turn off the ignition, exit the vehicle and close all doors.
vehicle 1 siren signal 1 light signal
– – –
Arming with the engine running Before arming, make sure that
The vehicle is in neutral (or in PARK with automatic transmission)
Hood closed, engine running
– – –
1 siren signal will sound 1 signal 1 light signal indication of a running engine
The sensor will be disabled and the included impact, add. sensor and mode control ignition zone protection
The door locks will close
The StarLine B92 Dialog security mode will be activated If the parking brake is not applied or the hood is open, then when step 1 is performed, the indication of the running engine and the remaining engine operation time (r10, or r20, r30, r99) will not appear on the key fob display.
After the set engine operation time (function 2 of table No. 2) has elapsed, the engine will be stopped without disabling the security mode.
Remote engine stop without disarming Press button 1 for a long time (until a beep sounds), then button 4 briefly car key fob
– – –
Arming without a key fob Before arming, make sure that
Ignition off
Parking brake applied 1 Open one of the doors and turn on the ignition
– – –
A 20-second interval countdown will start, after which the armed mode will turn on 3 Get out of the car and close all doors
– – –
20 seconds after the ignition is turned off, the security mode will automatically turn on:
1 siren will sound, light signals flash 1 time
The door locks will close If at the time of arming it turns out that the doors, hood or trunk are not closed properly, the parking brake is off (the foot brake is pressed), or one of the door, hood, trunk limit switches is faulty (permanently closed), then when the guard is turned on, the alarm will turn off protection of this zone. 4 siren signals and 4 light signals will follow.
StarLine B92 Dialog Automatic return to armed mode If automatic return to armed mode is programmed (function 5 of tab. No. 1) and within 30 seconds after disarming the car doors were not opened, the alarm system will automatically turn on the armed mode.
Attention! The door locks will be locked if they are connected to the alarm system and the option of auto-return to armed mode with locking of the door locks is programmed (function 5 of Table No. 1).
Reactivation of the armed mode will be confirmed by 1 siren signal and 1 car light signal. 1 beep will sound.
The engine will be blocked. The LED indicator will start flashing to indicate that the vehicle is guarded.
If one of the hood or trunk limit switches is faulty, then after the security is turned on, 4 siren signals and 4 car light signals will follow.
1 beep will sound.
Cabin Light Bypass (Sensor Activation Delay) A sensor activation delay may be necessary to bypass the door area while the vehicle's interior light fades out, or to calm the shock or volume sensors. Otherwise, when arming, false alarms may follow.
Depending on the programming, a 5, 30 or 60 second delay can be set (function 3, tab. No. 1).
Self-diagnosis when arming When arming, the alarm automatically checks all zones that should be armed
– – –
Doors, hood or trunk not closed properly
Faulty (permanently closed) one of the limit switches for doors, hood, trunk
Parking brake not engaged
– – –
In case of spontaneous elimination of a malfunction with the armed mode on, the alarm system will immediately automatically arm this zone.
StarLine B92 Dialog Disarming with sound confirmation signals Press button 2 on the key fob
– – –
– – –
Disarming without sound confirmation signals Press button 2 on the key fob first for a long time (until a sound signal appears), then briefly
– – –
If the "Two-step disengagement of engine blocking" mode is disabled (function 11 of Table No. 1), then the engine will be unlocked simultaneously with disarming.
If this mode is enabled, to unlock the engine, open the door, turn on the ignition and enter your personal code (see page 72). If the code is entered correctly
2 siren signals and 2 light signals will follow.
The engine lock will be disabled.
If 3 siren signals and 3 light signals follow when disarming, this means that the sensors were triggered in armed mode (see "Self-diagnostics when disarming", page 40).
StarLine B92 Dialog Disarming without using the key fob 1 Open the car door with the key
– – –
Alarms will start (if the armed mode was turned on by the key fob)
4 flashes of light signals will follow (if the armed mode was activated without a key fob) Within 20 seconds, turn on the ignition 2 and enter the personal code (see page 72)
– – –
After entering the last digit of the code:
2 siren sounds
Light signals will flash 2 times
The armed mode will be disarmed If 3 siren signals and 3 light signals follow when disarming, this means that the sensors were triggered in the armed mode (see "Self-diagnostics when disarming", page 40).
– – –
StarLine B92 Dialog Self-diagnostics when disarming When disarming, the alarm informs about the sensors triggered during disarming Disarm by pressing button 2 of the remote control
If the alarms were interrupted by the key fob:
– – –
Alarms If any of the security sensors is triggered in the armed mode, this will automatically turn on alarms: siren signals and light signals.
The keyfob will sound alarms, and the display will show the reason for the alarm.
While the siren is sounding, the icon corresponding to the cause of the activation will flash on the keyfob display.
Alarms are given in cycles.
The duration of one alarm cycle and the maximum possible number of cycles for various alarm causes are shown in the table below.
– – –
1) While the car's lights are flashing, the car's headlights will also flash on the keyfob display.
2) If, after the end of the alarm cycle, the cause of the alarm is not eliminated (for example, the doors remain open), then the protection of the corresponding zone is disabled until the cause of the alarm is eliminated (for example, until the doors are closed). At the same time, on the display of the key fob, the indication of the reason for the operation is preserved.
3) If the alarms were interrupted from the key fob, then the count of the number of alarm cycles with a periodically triggered sensor starts anew.
– – –
Displaying alarms on the keyfob display
The 1st level of the shock sensor has been triggered The 2nd level of the shock sensor has been triggered
Level 1 worked. sensor triggered 2nd level add. sensor
The one-level add-on worked. sensor No. 1 worked single-level add. sensor #2
– – –
Security of the alarm against power failure A short-term power failure of the alarm (for example, resetting the battery terminal) does not lead to disarming.
The alarm remembers its state and when the power is restored, it will again be in the same mode in which the shutdown occurred (see the status table below), a melodic key fob signal will follow.
If a self-powered siren is connected to the system, then when the battery terminal is disconnected, the siren will turn on the audible alarms.
– – –
Additional sensors As an additional sensor, both 2-level sensors (for example, microwave MWS203) and 1-level sensors (for example, PTS 01 combined pressure and tilt sensor, PS 01 pressure sensor, TS 02 tilt sensor) can be connected to the car alarm .
Sensors are connected to a 4-pin connector using cables included in the sensor kits.
After connecting the sensors, it is necessary to program the function 4 tab. #1 depending on the type of sensor used.
StarLine B92 Dialog
Additional wireless interlock relays digital radio relays blocking the engine (StarLine RD02) allows you to significantly increase the anti-theft functions of the car alarm due to the hidden installation of the radio relay in the standard wiring of the car and the absence of any wired connection between the central alarm unit and the radio relay.
Connection of information retrieval GSM modules search modules StarLine Space, StarLine Messenger M20, StarLine Messenger GPS M30 are specially designed to control StarLine alarms and locate a car. Their use makes it possible to control the alarm, receive messages about the intrusion into the car, determine the location of the car with virtually no distance limit - wherever there is a GSM network.
The transfer of information and control commands occurs via a GSM communication channel.
Information about the alarm (activation of security sensors) and the location of the car can be sent to the owner's phone in the form of SMS messages or calls with a voice message.
The type of notification is programmed by the owner.
The modules are connected to the StarLine alarm system with a 3-wire cable included in the delivery kit of the modules.
– – –
Anti-robbery mode To use the anti-robbery mode, function 8 tab. No. 1 must be programmed for option 1 or 2.
Enabling the anti-robbery mode with a key fob Attention!!!
After turning on the anti-robbery mode with a key fob, it is IMPOSSIBLE to turn it off with a key fob.
To turn it off, you must enter a personal code.
With the ignition on or with the engine running, simultaneously press and hold buttons 1 and 3 of the remote control
– – –
Permanent sound alarms will sound and light alarms will turn on
Door locks will be turned on
Depending on the state of the vibration signal of the programmable function 8 tab. No. 1, the engine will appear on the screen, the mode icon will be blocked either immediately or after the anti-robbery of the hand brake is turned off (pressing the brake pedal). During the first 30 seconds, blocking occurs in impulses, then continuously
StarLine B92 Dialog
Hidden activation of the anti-robbery mode Hidden activation of the anti-robbery mode can be used in a situation where it is difficult or impossible to counteract in other ways.
The mode is activated when the doors are opened in case the owner leaves the car, after which the system operates automatically according to a certain algorithm, consisting of several stages.
Close the car doors. With the engine running stage 1 or with the ignition on, press the service button for 2 seconds. After pressing the service button, the standby mode is activated, in which the alarm waits for the doors to be opened. There is no indication that the standby mode is on. The standby mode can continue indefinitely. As long as all doors remain closed, the alarm has no effect on vehicle functions. After opening one of the doors, the second stage of the anti-robbery algorithm is automatically activated Stage 2: open one of the doors There are no alarms at this stage, the locks are disabled. From the moment the door is opened, a 60-second time interval has begun, after which the alarms will be activated. You can make sure that the second stage of the anti-robbery mode is enabled by pressing button 3 of the key fob. The anti-robbery mode icon will flash on the display.
– – –
Sirens will sound continuously
Intermittent engine lock will be activated immediately or after the handbrake is released (pressing the brake pedal)
Alarm lights continue
– – –
Constant sound and light alarms continue
Permanent blocking of the engine will turn on. Attention!!! If you need to disembark passengers, and the anti-robbery mode is on, before opening the doors, turn off the anti-robbery mode (press button 2 on the key fob). Otherwise, 1 minute after any door is opened, alarms will start. Even if you forgot about it, you can turn off the anti-robbery mode with the key fob at stages 1, 2 and 3 (until intermittent engine blocking is enabled).
StarLine B92 Dialog Disabling the anti-robbery mode Attention!!! If the anti-robbery mode was enabled by the key fob, it can only be turned off by entering a personal code:
– – –
Press button 2 of the key fob with the ignition on. After the intermittent engine blocking is turned on, the anti-theft mode can only be turned off by entering a personal code (see page 72).
– – –
Panic mode
When the "panic" mode is activated, the light and sound alarms turn on for 15 seconds. If the security was turned off, the security mode is turned on.
With the ignition off, simultaneously and long press buttons 1 and 3 of the remote control
– – –
For 15 seconds, 1 short signal will sound and light will sound, indication of alarms of the armed mode will appear
The door locks will close (if they were open)
The armed mode will turn on (if the protection was disarmed) After the end of the light and sound alarm signals, the armed mode will remain on.
To interrupt alarms in the "panic" mode, press button 2 on the remote control. The alarms will stop.
The alarm will remain armed.
StarLine B92 Dialog Immobilizer mode To use this mode, “turn on” the icon on the key fob display using the cursor method (see page 24).
– – –
The keyfob display will constantly display the icon:
With the programmed immobilizer mode, the engine will be blocked automatically, 30 seconds after each ignition is turned off.
Disabling the engine lock in the immobilizer mode Press the service button for 2 seconds, then turn on the ignition
– – –
Alarm service functions Control of the vehicle state, battery voltage, interior temperature You can use this command in any mode to check the current status of the alarm, check the battery voltage and temperature in the car cabin Press briefly button 3 of the key fob
– – –
The temperature sensor is located in the central alarm unit. Therefore, the temperature displayed on the key fob display may differ from the actual temperature in the cabin, as it depends on the installation location of the alarm unit. Temperature measurement range: from -40 0C to +70 0C.
StarLine B92 Dialog Search for a car in a parking lot and control the temperature of the engine You can use this command in any mode to search for a car in a parking lot and control the temperature of the engine Press the keyfob button 4 briefly twice
– – –
The thermometer icon to the right of the vehicle is an indication of engine temperature.
If the temperature is below -400C or above +700C, the display will look like this:
– – –
The temperature displayed on the key fob display may differ from the actual engine temperature, as it depends on the location of the temperature sensor.
– – –
In the security mode, press twice 3 briefly button 1 of the key fob.
The shock sensor will be turned on again During one security cycle, you can turn off the shock sensor by levels and turn it back on an unlimited number of times.
During one security cycle, you can turn off the additional sensor by levels and turn it back on an unlimited number of times.
– – –
If two single-level sensors are connected as an additional sensor (function 4, tab. No. 1), then when switching off by levels, the first sensor will first turn off, then both sensors will turn off, then both will turn on.
Automatic control of door locks As additional features comfort and safety four options are available automatic control door locks when the ignition is turned on (off).
Control options are defined by programmable function 2 tab. No. 1.
– – –
Control of the additional channel No. 1 Options for the operation of the additional channel are determined by the programmable function 13 tab. No. 1. There are 4 options.
Channel activation is performed in the same way, regardless of the selected option:
– – –
If the trunk does not open when the channel is activated, the indications open trunk and disabled sensors on the key fob display will not follow. After 20 seconds, the trunk area will be armed again.
– – –
– – –
View additional equipment, connected to channel No. 1, is specified when setting the alarm
– – –
Control of the additional channel No. 2 Options for the operation of the additional channel are determined by the programmable function 14 tab. No. 1.
There are 4 options:
Option 1: two-step unlocking of the door locks Disarm by pressing button 2 of the key fob
– – –
To unlock the other doors, press button 2 on the key fob again. To implement a two-step unlocking of the door locks, the driver's door activator and the activators of the remaining doors must be connected in accordance with the diagram given in the installation manual.
For options 2 or 3, the channel can be programmed for any fixed duration of operation from 1 to 120 seconds. If option 2 is selected, the shock sensor and the additional sensor are disabled during the operation of the additional channel.
If option 3 is selected, the sensors are NOT disabled.
– – –
In latch mode, each time the channel is activated, the output state is reversed.
To activate additional channel No. 2 in the case of options 2, 3 or 4 - press button 3 of the remote control for a long time (until a sound signal appears), and then button 1 shortly
– – –
Control of additional channel No. 3 Options for the operation of additional channel No. 3 are determined by the programmable function 15 tab. No. 1.
The channel is used to connect autostart.
More detailed information on the operation of channel 3 is given in the installation instructions.
Management of additional channel No. 4 Options for the operation of additional channel No. 4 are determined by the programmable function 12 tab. No. 1.
The channel is activated automatically.
The channel can be programmed for any fixed duration from 1 to 120 s.
The channel output is used, for example, to turn on the "polite backlight", "light path" or automatically raise windows when the guard is turned on.
For more information about the operation of additional channel #4, see the installation instructions.
StarLine B92 Dialog Turbo timer mode To use the turbo timer mode
Function 12 tab. No. 2 must be programmed for one of the ignition support options
The key fob display must have an “on” icon (see “Programming operating modes using the cursor method”, page 24).
– – –
2 Remove the key from the ignition If you need to arm the car, get out of the car, close all doors and press button 1 on the key fob
– – –
At the end of the set time of the turbo timer (function 1 tab. No. 2)
The engine will be turned off
If the security mode is on, then the ignition, shock sensor and additional sensor zones will be armed. To interrupt the call signal, press any button on the key fob. Light indication of open doors. No. 1 is on, then when you open any of the doors, the alarm will warn you with light signals that the doors are open.
The duration of the warning lights can be programmed to 10, 20 or 30 seconds.
Control of the key fob battery charge with LCD
– – –
Checking the serviceability of limit switches The alarm system provides for the possibility of monitoring the serviceability of the door, hood and trunk limit switches when the security mode is off. Opening the doors, hood and trunk with the ignition on should be accompanied by periodic flashes of the status LED. If no indicator flashes, then the corresponding limit switch is faulty (or not connected to the alarm).
The serviceability of the limit switches, as well as the correct connection of the “ignition” circuit, can be checked using the indication on the key fob:
Open the door, hood, trunk, turn off the handbrake and turn on the ignition. Click on the key fob button 3 key fob
The key fob display will show the status of the above alarm zones:
Check each zone in sequence:
Close the doors, press button 3,
Close the hood, press button 3,
Close the trunk, press button 3,
Apply handbrake, press button 3,
Turn off the ignition, press button 3. Each time you press button 3 on the key fob, the icons of the corresponding security zones should disappear.
StarLine B92 Dialog
Service mode To temporarily disable the anti-theft and security functions signaling, for example, when the car is handed over to a service station, it is recommended to turn on the service mode.
To do this, using the cursor method (see page 24), “turn on” the icon on the key fob display
– – –
The service mode CANNOT be activated when the security mode is on.
Alarm View Function The Alarm View function is designed to diagnose false alarms. In the event of an alarm, information about the triggered sensor and the response time remains in the alarm memory. In total, up to 8 latest alarms can be stored in memory. For example, if there were 8 hits of the shock sensor, and the alarms were NOT reset by the key fob, 8 records of the hit of the shock sensor will be stored in the alarm memory.
Viewing is carried out as follows:
– – –
Activate the blocking of the remote control 1 buttons (see page 71) by simultaneously short pressing the buttons 2 and 4 Long press the button 4 of the remote control 2 until the indication of the last recorded alarm (alarm number 1) appears. Pressing button 3 will display the alarm time
– – –
StarLine B92 Dialog Automatic control of the communication channel In the automatic control mode, at specified intervals (3, 5 or 7 minutes), the communication channel between the central signaling unit and the remote control is checked.
– – –
The communication channel is monitored only in armed mode. Options for automatic control of the communication channel are set by the programmable function 16 tab. No. 1.
Control of the number of key fobs recorded in the system With the ignition on and the doors closed, press button 3 of the key fob. The number of flashes of the status LED will correspond to the number of key fobs stored in the alarm memory.
– – –
There will be a short sound signal
Short vibration signal
The icon will disappear
The button lock will be disabled Personal code of emergency deactivation of security mode Personal code of emergency deactivation of security mode or anti-robbery mode can consist of 1, 2 or 3 digits, each of which can take a value from 1 to 6 inclusive. The procedure for programming a personal code is described in the installation manual.
Upon delivery (or after resetting to “factory settings”), the personal code is “3” (see function 9 in Table No. 1).
StarLine B92 Dialog Algorithm for entering a personal emergency shutdown code Open the door with the key and leave it open
Alarms will start (if the security was turned on by the key fob)
4 light signals will flash (if the security was turned on without a key fob)
No signals will follow (if the armed mode is off)
ENTERING THE 1ST DIGIT:
1 Turn on the ignition. Press the service button a number of times equal to the first digit of the code. Switch off the ignition.
If the code is 1-digit and it is entered correctly, then the alarm will turn off the security mode, 2 light signals will follow
In the case of a 2 or 3 digit code, enter the following number:
ENTERING THE 2ND DIGIT:
2 Turn on the ignition. Press the service button a number of times equal to the second digit of the code. Switch off the ignition.
If the code is 2-digit and it is entered correctly, then the alarm will turn off the security mode, 2 light signals will follow
In the case of a 3-digit code, enter the following number:
ENTERING THE 3RD DIGIT:
2 Turn on the ignition. Press the service button a number of times equal to the third digit of the code. Switch off the ignition.
If the code is 3-digit and it is entered correctly, then the alarm will turn off the security mode, 2 light signals will follow
– – –
Recording keyfob codes The keyfob codes are recorded when the security mode is off in the following order:
1 Press the service button 7 times and turn on the ignition
– – –
Repeat step 2 for all other writable keyfobs. The interval between entries should not exceed 5 seconds. Successful recording of the next key fob is confirmed by the corresponding number of siren signals.
3 Switch off the ignition.
– – –
3 light signals will follow Attention! In total, up to 4 key fobs can be recorded in the alarm memory. When writing new key fobs, it is necessary to overwrite the old ones, otherwise they will be deleted from the alarm memory.
To record a 3-button keychain without a display, a combination of buttons 1 and 2 is also used.
StarLine B92 Dialog Remote engine start Before starting the engine with a key fob or activating automatic starts in without fail check out the features of remote engine start:
Features of remote engine start Remote engine start cannot be performed in the following cases:
Ignition on
Hood open
Parking brake applied or foot brake applied
Preparation for starting the engine on vehicles with manual transmission (software neutral) has not been completed
1. In one start cycle, the system can make 4 attempts to start the engine. If after the 4th attempt the engine does not start, then on the display of the key fob with feedback (provided that it is in the reception area) “OST” will be displayed and the key fob will give 4 beeps, which indicates the end of attempts to start the engine.
4 vehicle lights will follow.
2. If remotely running engine stalls before the end of the programmed warm-up time, a new engine start cycle will be attempted.
3. The automatic engine start function based on temperature can be enabled regardless of the state of the alarm start or periodic start functions.
operating instructions Preparing for remote start on vehicles with manual transmission To remotely start the engine on vehicles with manual transmission, it is necessary to perform the “soft neutral” procedure. “Soft neutral” is a specific procedure for the driver to ensure that the engine will not start in gear during remote start.
Enable software neutral To enable software neutral
Function 12 tab. 2 must be programmed for one of the ignition support options
The engine must be running Depending on the state of function 12 tab. No. 2 1 the inclusion of a software neutral can be carried out in the following ways:
– – –
Remove the key from the ignition switch.
2 Engine continues to run.
Get out of the car and close all doors.
3 Arm
If the turbo timer mode is NOT programmed:
– – –
When arming with the engine running, the conditions of "software neutral" are also met. After the engine has worked for the specified time, it can be started by the key fob or automatically.
StarLine B92 Dialog Remote engine start with key fob Before remote start, make sure that
Hood closed and parking brake applied
For a car with a manual transmission, the “software neutral” procedure was performed
For vehicles with automatic transmission, the control lever is in the "PARK" position
Press button 1 on the key fob for a long time 1 (until a beep sounds), then button 3 shortly
– – –
In one start cycle, the system can make 4 attempts to start the engine. If after the 4th attempt the engine does not start, then on the display of the key fob with feedback (provided that it is in the reception area) the inscription “OST” will be displayed, and the key fob will give 4 beeps, indicating the end of attempts to start the engine.
4 flashes will follow.
The remaining engine time is updated every minute (for example: r10, r09, r08, r07...) 1 minute before the end of the engine warm-up, the inscription r01 will be displayed and 2 series of 4 beeps from the key fob will sound. After the end of the engine warm-up time and its automatic stop the signal lights will flash 4 times.
The keyfob display will briefly show r00, 4 keyfob beeps will sound.
Remote engine stop If necessary, the engine started automatically or by remote control can be stopped at any time:
Press button 1 on the key fob for a long time, then button 4 shortly
– – –
StarLine B92 Dialog Remote extension of engine operation If necessary, the operation time of an engine started automatically or from a key fob can be extended:
– – –
You can extend the operation of the engine an unlimited number of times. The maximum time that can be set on the key fob with multiple extension attempts is 30 minutes.
– – –
Automatic engine start Automatic engine start cannot be performed in the following cases:
Ignition on
Hood open, parking brake off (or foot brake applied)
On vehicles with manual transmission, the “software neutral” procedure has not been completed
For vehicles with a manual transmission, it is possible to activate any of the autorun modes only after performing the program neutral.
Automatic engine start by alarm clock To enable automatic engine start at a set time by key fob alarm:
Check if the current time on the key fob is set correctly.
Program an alarm for the desired start time
Turn on the alarm (see page 21). The enabled alarm mode on the key fob display will be indicated by an icon.
Using the cursor method (see page 24) “turn on” the icon on the keyfob display. 1 light signal will follow, a melodic sound signal of the key fob will sound and an icon will be displayed on its display, indicating, together with the icon, the enabled autostart mode by alarm clock. For a short time, the key fob display will show the set future start time, which will then change to the current time:
Indication of the enabled autorun mode by alarm clock:
StarLine B92 Dialog
To turn off the autostart mode by alarm clock:
Note:
1) The presence of the key fob in the range of the transceiver at the time of the engine autostart by alarm is not required.
2) The engine start time may differ from the programmed alarm time within 3 minutes.
3) The alarm auto start function is enabled for one start cycle.
For a new start, it is necessary to activate the autostart from the key fob again each time (turn on the icon).
Periodic engine start (activated from the remote control) The start period (2, 3, 4 or 24 hours) is determined by the programmable function 3 tab. No. 2. To enable the intermittent start mode
Using the cursor method (see page 24) “turn on” the icon on the keyfob display. 1 light signal will follow, a melodic key fob signal will sound. The display will constantly show an icon indicating that the intermittent start mode is enabled.
Simultaneously with the activation of the function, the engine will start and warm up during the programmed time.
To turn off the periodic start mode:
Re-position the cursor on the icon and press button 1 on the key fob. 2 light signals will follow, a melodic key fob signal will sound, the icon will disappear.
– – –
Automatic start of the engine by temperature (activated from the key fob) The alarm allows you to automatically start the engine upon registration by an external temperature sensor fixed on the engine, the temperature is lower than the programmed one (-5°С,
10°C, -18°C or -25°C, function 4 table No. 2). Engine warm-up time is determined by function 2 tab. No. 2. The alarm monitors the sensor readings immediately from the moment the function is activated. The minimum interval between repeated autostarts, counted from the moment of the previous start, excluding the engine warm-up time, is 1 hour. After activating the temperature start function, the number of engine autostarts is not limited by temperature.
To activate the automatic engine start mode based on temperature:
Using the cursor method (see page 24) “turn on” the icon on the key fob display. 1 flash of light signals will follow, a melodic signal from the key fob will sound. An icon will appear on the keyfob display indicating the enabled autostart mode by temperature.
– – –
To turn off the temperature autostart function
Place the cursor on the icon and press button 2 on the key fob.
2 light signals will follow.
The melodic signal of the key fob will sound, the icon will disappear.
StarLine B92 Dialog Programming security and service functions (Table No. 1) Security and service functions, as well as the parameters of the alarm operation, can be changed using the service button and remote control.
The list of functions is given in the programming tables.
The programming procedure is described in detail in the alarm installation manual.
Contact the experts who installed the alarm. Changing programming parameters or resetting to factory settings may cause the engine to lock up during normal startup, as well as wrong work standard electrical equipment and the alarm itself.
– – –
Factory settings are highlighted in grey.
StarLine B92 Dialog Batteries for key fobs and their replacement
Keyfobs use the following batteries:
Keychain with LCD display uses 1 element "AAA" 1.5V
Key fob without display uses 1 “CR2450” element 3.0 V The operating time of the key fob batteries depends on: feedback, on the type installed element nutrition.
The capacities of commercially available batteries may vary by several times.
The average battery life is:
For keyfob LCD display - 6 to 9 months
For key fob without LCD display - from 9 to 12 months When the battery is discharged, an icon will be displayed on the display of the main key fob - the battery needs to be replaced.
Replacing the battery in the key fob with LCD
2. Install new element supply, observing its polarity.
Correct position The battery is indicated on the key fob body under the cover. Close the fob cover.
3. After replacing the battery, correct the current time.
Replacing the battery in the key fob without LCD
1. Slide the key fob battery cover and remove the old battery.
2. Install a new one, observing the polarity. The correct position of the battery is indicated on the contact of the holder.
1.32-1.34. Looking forward to further growth. Support level - 1.2750 Resistance level - 1.34 Commentary on the long-term picture, ... "Approved by the Educational and Methodological Association..." Law of December 27, 2002 No. 184-FZ "On Technical Regulation", and the rules for applying the standards of organizations - GOST R 1.4 2004 "Standardization in Russian Federation. Standard ... "MODERN MATERIALS AND SYSTEMS IN CONSTRUCTION Guidelines for the implementation of laboratory ... "
The materials of this site are posted for review, all rights belong to their authors.
If you do not agree that your material is posted on this site, please write to us, we will remove it within 1-2 business days.
When developing a system StarLine B92 Dialog take into account all the benefits security systems developed earlier, and such factors as noise immunity and cryptographic strength of the control signal, the ability to withstand physical overload, working temperature Range, convenience and practicality of operation.
For each instance, a personal key is generated, the parameters of which are unique. This key is written to the alarm unit simultaneously with the key fobs. The use of such technology provides protection against replacement, algorithmic and other types of code grabbers.
Of course, protection is provided not only by the uniqueness of the key. The length of the encryption code and the data transfer rate are also important. All this prevents attempts to interfere with the dialogue exchange between the key fob and the system. The use of an eight-channel transceiver and the “Quick Dialogue” code in the StarLine Dialog series provides the systems with not only high cryptographic strength, but also excellent noise immunity, as well as an increased control and notification range.
New opportunities with FLEX- Preheater control
- Automatic folding mirrors
- Automatic sunroof closing
- “Light” path after arming
- Automatic installation of seats for the owner
- Automatic return of the steering column to its original position (folding)
- Automatic inclusion of low beam headlights when the car is moving (by lowering the hand brake, pressing the brake pedal, after autostart, or when starting the engine)
- Turning on the light alarm using the standard alarm controller
- Control of additional door locks
- Disabling (connecting) additional sensors, supplying power to the sensors at the required time
- Additional blocking of the engine (imitation of malfunction)
- Opening the trunk with disabling the standard alarm
- Bonnet lock control (closing)
- Additional authorization (immobilizer connection and central lock opening)
- Imitation of signals of "intelligent" ignition locks (VW, Mercedes)
- Turning off the wipers, radio for the duration of the autorun
- Activation of heated seats and heated windows for the duration of the autorun
- The second impulse to turn off the ignition in case of unsuccessful autostart on push-button cars
- Imitation of the second signal of a starter (with delay)
Features of car alarm StarLine B92 Dialog:
- cryptographic signal code " Quick Dialogue» (128 bits long) eliminates intelligent electronic hacking
- use of individual encryption keys for each system
- automatic control of the communication channel ( every 3, 5, 7 minutes)
- "Megapolis" mode (increased range of control and notification)
- increased data rate
- determining the charge voltage of a car battery
- viewing the history of alarms indicating the time of the event
- control signal noise immunity
- shockproof key fob with two-way communication
- ergonomic design and keychain convenience
- the antenna module is built into the key fob
- comfortable backlight key fob with LCD
- key fob sound volume selection and melody selection
- intuitive display
- russified designations of display icons
- large icons
- extended temperature range, from - 40 to + 85ºС
- complete teamwork with StarLine Messenger GPS satellite module
- auto start (remote, by timer, by engine temperature)
- turbo timer
Benefits for installers:
- The algorithm for programming functions has been modernized. Now online on the key fob display you can see the function number and its programmed value.
- The management of additional channels has been modernized, allowing you to install StarLine system B92 Dialog for all modern cars.
- StarLine B92 Dialog models can be easily transformed into a security and search complex by adding one of the StarLine GSM / GPS modules, which will connect to the alarm system via a local network using a single 3-pin connector.
- To increase anti-theft security, StarLine R2 digital wireless blocking relays can be connected.
Over 50 standard and programmable functions provide the car owner with not only reliable protection, but also comfort when using the StarLine B92 Dialog car alarm.
Equipment:
- central signaling unit
- 1 keyfob with two-way communication with LCD
- 1 keyfob with two-way communication without LCD
- 2-level shock sensor
- transceiver
- hood button
- Light-emitting diode
- service button
- set of wires
- engine temperature sensor
- installation instructions
- user manual
- user memo
