Show player controls
- Posted on Aug 31, 2016
- When dismantling the trim and handles, be very careful, as the interior plastic is quite easy to damage or scratch.
This video is not a manual or manual for the vehicle.
All information provided in the video relates solely to Hyundai Accent 2 (Second generation) - Hyundai AccentWindow lifterDoor cardDoor trim
Thank you very much. =)
I'll take note
Repair with Accent Thank you
where can i get these blades?
Thanks for the kind words =)
Replacement of internal and external handles Hyundai Accent
Before replacing the Hyundai Accent exterior handle, you will need to completely remove the upholstery. Moreover, it does not matter whether work is being done on the front or rear door - the algorithm for carrying out the work is completely the same. Internal changes are much easier. Before removing the upholstery, be sure to disconnect the battery - there are a lot of wires inside the door, some are live. Short circuit and fire may occur. Be careful and follow safety precautions.
How to replace interior grips Hyundai Accent
This procedure is very simple - there is no need to remove the door trim. To carry out the work, you need to have only two screwdrivers - a Phillips and a flat one. First, unscrew the bolt securing the housing to the door. Gently pull it towards you, do not apply a lot of force - you can break the traction.
Appearance
Two rods fit the inner door opening lever:
- The first is for fixing the lock.
- The second is to open the door.
With a flat screwdriver, remove the clamps from the rods, after which the inner handle is safely removed. Installation is in the reverse order. After the repair, Hyundai Accent doors will open much better. Replacement of handles is necessary only in case of breakage - most often it happens when severe frosts. Water gets on the rods and elements of the castle, preventing them from moving. Plastic elements break when exceeded permissible load on them.
Replacing the outer
The outer door handle is also relatively easy to change, but you have to remove the trim. To do this, follow these steps:
All assembly is carried out in the reverse order. Difficulties should not arise. When disassembling the door, it is advisable to blow inside compressed air the whole space - there accumulates a lot of dust that you breathe. When repairing one mechanism, try to inspect and troubleshoot other nodes. This will help to avoid frequent repairs in the future.
And a short video that will help you with the repair:
Hyundai Accent
The Hyundai Accent(Korean: 현대 엑센트), or Hyundai Verna (현대 베르나) in South Korea, is a subcompact car produced by Hyundai. In Australia, the first generation models carried over the Hyundai Excel name used by the Accent’s predecessor. The Accent was replaced in 2000 by the Hyundai Verna in South Korea, although most international markets, including the USA, retained the "Accent" name.
The Accent is produced for the Chinese market by Beijing Hyundai Co., a joint venture with Beijing Automotive Industry Corp. For Russian market it is assembled by TagAZ plant in Taganrog. In Mexico, the Accent is marketed by Chrysler as the Dodge Attitude, previously Verna by Dodge. In Venezuela, Chrysler marketed them as Dodge Brisa until 2006. The Brisa was assembled by Mitsubishi Motors at its plant in Barcelona, Venezuela. Since 2002, the Accent has been the longest-running small family car sold in North America. In Puerto Rico, it's been sold as the Hyundai Brio. In Russia, it is sold as the Hyundai Solaris.
Hyundai
Hyundai Group(Hangul: 현대그룹 ; hanja: 現代그룹 ; / ˈ h j ʌ n d ɛ /) was a multinational chaebol (conglomerate) headquartered in Seoul, South Korea. It was founded by Chung Ju-yung in 1947 as a construction and Chung was directly in control of the company until his death in 2001.
Following the 1997 East Asian financial crisis and Chung’s death, Hyundai underwent a major restructuring and break-up, which reduced the Hyundai Group’s business to encompass only container shipping services, the manufacturing of elevators, and tourism. Today, most companies bearing the name Hyundai are not legally connected to Hyundai Group. They include Hyundai Motor Group, Hyundai Department Store Group, Hyundai Heavy Industries Group and Hyundai Development Company. However, most of the former subsidiaries of the Hyundai conglomerate continue to be run by relatives of Chung. If these companies were considered as forming a single broad family business, then it would remain the largest company in South Korea with enormous economic and political power in the country.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Hyundai (disambiguation)
Hyundai is a zaibatsu of South Korea, including:
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Hyundai Motor Company
Hyundai is currently the fourth largest vehicle manufacturer in the world. Hyundai operates the world’s largest integrated automobile manufacturing facility in Ulsan, South Korea, which has an annual production capacity of 1.6 million units. The company employs about 75,000 people worldwide. Hyundai vehicles are sold in 193 countries through some 6,000 dealerships and showrooms.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Search
How to remove the power window handle on a Hyundai Accent
To remove the front door upholstery on a Hyndai Accent car, we need flat and Phillips screwdrivers, and a special tool for removing the door trim holders.
- we release the bracket for fixing the window lifter handle, for this we insert a rope or a piece of fabric between the handle and the door upholstery, pull the rope trying to hook the ends of the bracket and release it from the engagement, at this moment we pull the handle towards ourselves, removing it from the splines of the window lifter shaft
- using a screwdriver with a narrow blade, remove the two decorative plugs of the screws securing the inner door handle
- unscrew two internal handle screws doors
Read:
Remove window handle with a cloth Hyundai Accent Hyundai Accent Hyundai Accent
How remove the handle mechanical glass on Accent.
When dismantling the trim and handles, be very careful, because the interior plastic is quite easy to destroy ...
- unscrew the fixing screw inner handle door opening
- we shift the handle towards the front of the car by about one centimeter, with a screwdriver we turn the fasteners for fastening the locking rod and opening the door lock
- remove the rods from the holes of the levers and take out the handle
Read:
- turn inside out two fastening screws upholstery to inner door panel
- turn three fastening screws panels that are closer to the door canopies
- remove the door trim from the inner door panel
- using a special puller, we remove the clips from engagement
- in the photo, the arrows indicate the location of the caps
- Install the door upholstery in the reverse order of removal.
Hyundai Accent 2. Removing door trims and manual window handles
When dismantling the trim and handles, be very careful, as the interior plastic is quite easy to damage or scratch. This video is not a manual or manual for the vehicle. All information provided in the video applies exclusively to Hyundai Accent 2 (Second generation)
Comments
Tiana Grom: Today I wanted to change the speaker on the Opel. NO there is no bracket. It didn’t work out with a rag too. It sits dead. If you know about this case, write
XXXL XXXL: Handsome thank you just really less chatting superfluous short short short need short and to the point Come on good luck
Muslim Kadyrov: Highly good videos thank you put 5
Alexander Grafov: Which brand of trim removal kit?
Sultan 123: many thanks man! good luck with the channel
Evgeny Tomilin: Nothing can be removed.
Evgeny Tomilin: Something didn’t work out either with a rag, or with caress, or with wiring, this ring is not even visible in any way, how can you cling to it?
Evgen Andreevich: Let's have more vidos with an accent, all sorts of little things
Stanislav Shadeiko: bro, you have a lot of bullshit. Buy yourself a tripod and less pussy, brotherly.
ROSTOV NATION: Pretty boy!
Sam: hike then lock back on the traction to put on hemorrhoids.
Video on this topic
auto life, change speakers to Hyundai Accent
hello guys) in this video the life of the car is filmed) improvements) I change the regular speakers to others) ordinary everyday life.
HYUNDAI Accent front right door disassembly
Hyundai accent dismantling the front right door, remove the lock.
Disassembly and removal of the door Hyundai Accent MC (Verna) 06-10
Course on removing dents without painting AutoYuvelir Russia http://bezpokraski.spb.ru/ Ukraine http://bezpokraski.com.ua/
HYUNDAI ACCENT REMOVING THE FRONT DOOR UPHOLSTERY
How to remove window handles with your own hands. Very simple!
Manual for all cars! Everything is very simple)
How to remove the window lifter handle on a foreign car
How to remove the window lifter handle on a foreign car, in this case this is a ford escort, you will find out in this video.
Remove window lifter handle with cloth Hyundai Accent Hyundai Accent Hyundai Accent
How to remove the handle of a mechanical window lifter on an Accent.
Hyundai Accent 2. Removing door trims and manual window handles
When dismantling the trim and handles, be very careful, as the cabin plastic is quite easy to damage.
Before removing the door trim on Solaris, you need to pick up a flat screwdriver with a tip width of up to 3 mm. You will need it in order to remove the decorative caps covering the screws. Self-tapping screws hold the door card in the door body. Try to get them with minimal damage, and ideally without any.
Solaris door trim is made of thick plastic and is held around the perimeter on special clips. In addition, for reliable fixation, the door cards are screwed on with two screws.
Removing the door trim on Solaris is required in several cases:
- for soundproofing work;
- to replace the standard speakers in the front doors with more powerful (high-quality ones);
- for window lift repair;
- for glass door replacement.
Dismantling procedure
If power windows are installed on the front doors, then there is no glass lift handle on the front. In this case, the dismantling procedure is as follows.
Before dismantling the door trim in the rear row, it is necessary to remove the glass lifting handle. To do this, using a special hook, remove the retaining ring holding the handle in the groove. Grab it and pull it to the side. Only after that, by moving towards yourself, it will be possible to dismantle the handle. Other operations in order to remove the Solaris door trim back row perform in the same sequence as when dismantling the front row trim.
Modern cars are becoming more complex and technologically advanced. Even budget models type Hyundai Getz can boast of nodes and assemblies that they had never dreamed of before. But this medal has back side Designs are getting more and more complex. And now you will not surprise anyone with the fact that in order to replace a light bulb in rear light it needs to be removed. And as before, everything was simple - unscrewed two screws and here she is, looking at you.
It's the same with doors. The lock was outside the door, instead of a limiter - a piece nylon tape, and the window leaf replaced the power window. Everything is clear and simple. Now it looks quite different. Everything is hidden inside the door. And an ordinary motorist sometimes puzzles over how to get there in order to lubricate, adjust or simply replace something.
This work begins with the dismantling of the inner upholstery of the door. Only after its removal can a simple man in the street see what the designer hid from him. On a Hyundai Getz vehicle, upholstery removal may be required to lubricate the door stop or replace the factory speaker with a new or better one.
So, the set of tools that you need is minimal. It consists of a Phillips screwdriver and a knife with a sharp tip. Consider the front door. To begin with, carefully remove with a knife all the plugs that hide the screws.
Then we unscrew all the screws.
When removing the upholstery, the inner lining of the rear-view mirror will interfere with us. So we are dismantling it. To do this, insert a knife between the lining and the door and snap off the clip.
Now you have to disconnect the inner door handle. To do this, we will unscrew the screw ...
... and move the part forward towards the front of the car.
In the gap formed, we will see two rods coming from the lock. Prying the latches, take them aside and remove the traction.
The pen remains in your hands.
Carefully insert the knife blade between the upholstery and the door and snap off the clips one by one.
It remains to disconnect the power window button block by pressing the latch.
Fortunately, the pistons are made of high quality plastic, break extremely rarely and can be reused. Here is their location on the front upholstery:
It remains to carefully cut with a blade along the bituminous sealant protective film.
The process of removing the upholstery of the rear door is completely similar. The only difference is the location of the clips and screws.
Upholstery is installed in reverse order. Do not forget to stick the protective film (the sealant does not dry on it, so it is enough to put it in place and press it down)!
I present a small instruction for removing and installing the upholstery of the front door. To do this, you only need a screwdriver with a flat and Phillips blades. The parts are very easy to scratch, so you can use duct tape to wrap around the blade of the screwdriver.
And so let's get down to business.
1) First of all, you need to disconnect the minus coming from battery, i.e. wire coming from the battery terminal.
2) Prying with a screwdriver, you need to fold aside the decorative cap of the screw, which is needed to fasten the lining to the inner handle of the lock. But keep in mind that the plug cannot be completely removed, as it is connected to the lining with a jumper.
4) Then remove the lining. The picture shows how to remove the lining of the inner handle of the lock.
5) In the upholstery of the armrest there is another plug for the screw, remove this one too by prying it with a screwdriver;
6) After removing the plug, remove the screw.
7) There is also a screw for fastening the door trim (in other words, the front screw), and so first remove the decorative plug from this screw using a screwdriver. This plug does not need to be completely removed, otherwise it will break, as it is connected to the sheath with a jumper. 
8) Now you can remove this screw with a screwdriver.
9) Similarly, unscrew the rear screw, which is used to fasten the door trim.
10) Next, prying with a screwdriver, you need to remove another plug, only this plug of the outer rear-view mirror support lining; 
11) The picture shows how to do it; 
12) There is one screw in the rearview mirror support pad, it needs to be unscrewed; 
13) After that, you can already remove the overlay;
14) Now it is necessary to disconnect the upholstery from the door panel, for this, take the plastic holders in your hands, and with the help of force remove the upholstery;
15) But before that, you should inside upholstery, disconnect the wires coming from the block that controls the power windows. After that, you can remove the upholstery.
Below is a picture of the door trim. As we can see the upholstery has eight plastic holders, these upholstery is attached to the door panel. If there are broken holders, replace them with new ones.
16) The bracket for attaching the armrest has 2 screws, if necessary, unscrew them;
17) Now you can remove the bracket; 
18) If you want to look inside the door (there are already door fittings there), then you just need to peel off the polyethylene moisture-proof film from the door panel;
19) To install the door trim, repeat these instructions, just in reverse order.
And I want to make one more point, if you have Hyundai car or KIA, that is, an interesting resource where you can purchase an autoscanner that is prepared specifically for these cars. One has only to connect it to the OBD-2 connector and all the information about the car is at your fingertips.
Many people love tuning, so they install additional parts for the car. Some go deep into car audio most of all, and it is for such people that it is important to know how to remove the trim on rear doors and tailgate on the Hyundai Solaris. This is due to the conduct of all the necessary wires, as well as the integration of speakers.
Removing the trim from the tailgate is quite simple, this operation on the Hyundai Solaris is performed in just a few steps and does not require professional skills.
Instruction for sedans
- To begin with, the cover is removed from the handle. This is done with a thin screwdriver. Removing this part is quite easy, so it's best not to overdo it with force.
- Further, this handle is removed completely. It is held on by two screws, so there shouldn't be any problems.
- After that, the motorist will have to find as many as nine caps on the tailgate that hold the skin itself. They are hidden by special plastic tips. Therefore, finding them is not so easy.
- The lining is removed.
That's all. It is worth noting that if you had to remove the trim from the tailgate due to the fact that it was torn, then you can always buy a new one in the store. And there are two options: Korean and domestic. And the second one is somehow more expensive than the original. Pistons are also sold in car dealerships, most often in a set, so it’s not scary if a couple is rubbed.
The assembly of this design occurs in exactly the same way, but in the reverse order.
Hatchback Hyundai Solaris
For this type of car, everything is done much easier and it is not clear what this is connected with.
- First, two self-tapping screws are unscrewed.
- Next, a special plug is removed from the tailgate
- The upholstery is removed very carefully so as not to break the caps.
That's all. Everything that was relevant for the tailgate in the sedan is also relevant for the hatchback, so there is nothing special to paint.
Step-by-step instructions for removing the casing
The dismantling of Hyundai Solaris door skins on sedan and hatchback vehicles is carried out identically.
Removing the door trim on the Hyundai Solaris is required in the following cases:
- door body repair
- material hauling
- door soundproofing - sizing vibration and soundproofing
- speaker replacement
- removing the power window mechanism
To remove the door trim on the Hyundai Solaris, you will need:
- Curly screwdriver
- Fine slotted screwdriver
- Clip removers
We open the door, with a slotted screwdriver we pry off square decorative plugs - one under the door opening handle, and the other in a plastic insert. Next, under the plugs, unscrew the two self-tapping screws with a curly screwdriver. Remove the plastic trim panel on the door handle.
Using a clip remover, remove the triangle that hides the rear-view mirror fasteners. The triangle is attached to the door with three clips.
Prying the trim from the bottom with a plastic spatula, carefully pull out the clips from the door skeleton with a clip remover. We remove the casing and by pressing the latch we disconnect the plug going to the power window control button.
There is a barbaric way to remove the skin: by sticking your fingers into the hole at the inner handle for opening the door, you simply tear it off the door skeleton. In this case, there is a possibility of damage to the clips and the impossibility of their subsequent installation.
Carefully remove the film - anther, which rests on bituminous mastic.
If necessary, unscrew the screws securing the button to the skin. We extract it.
Before installing the casing, we check the integrity of all clips, if damaged, replace with new ones.
As you can see, removing the trim, both from the trunk and from the doors, is quite simple and you don’t need any professional skills for this, it’s enough to have only a couple of screwdrivers that will do all the work.
Do not doubt your abilities, because the Hyundai Solaris is assembled quite well and you do not need to be an auto mechanic to change some part. It is also a useful skill for those who want to insulate vehicle or improve soundproofing. To do this, it is necessary to remove the casing.
Approximately also easily the covering and from a roof is removed. However, as a rule, few people are engaged in roof tuning. One has only to understand that those bolts that hold it are hidden behind a mirror, a lantern, and holders. To begin with, everything “small” must be removed from the roof, only then the fabric is removed. The clips that hide the bolts are easy to remove from the roof and require no effort, so you need to be careful with them.
look interesting video on this topic
