Plastic became almost indispensable material. He meets every house and office. It makes household items, dishes, toys, household appliances, car elements, and it is widely used to finish the premises. Plastic has many advantages, such as:

• ease;
• cheapness;
• simplicity;
• unpretentiousness;
• resistance to temperature drops.

All these qualities allowed him to firmly entrenched the goods market. However, plastic is subject to external influence, as a result of which scratches and scratching appear on it, the initial gloss of the subject is lost, which will certainly upset each. And such an object as a car headlight, if there is a failure, significantly spoils the life of car owners. Replacing headlights - the pleasure is quite expensive, and not every driver is ready to spend money on it. But in fact, the loss of plastic is not a reason for the disorder, because to return to the beloved subject almost initial species, you can even at home with your own hands.

Where to begin

To begin with, we are determined with what you need to revive? After all, for different objects from plastic, the processing may differ. Plastic polishing can be:

• mechanical;
• chemical;
• thermal.

Depending on the nature of scratch, if there are deep scratches, it is standing before polishing to carry out grinding. If deep scratches are missing, polishing will solve all problems.

In fact, possessing a high plasticity and low melting point, plastic is fairly easy to bind both grinding and polishing. Therefore, if you correctly approach this issue, polishing will allow you to breathe life even in the oldest items.

Grinding plastic

So, if you need to update the item that has greatly suffered as a result of external influence, and has many clear scratches, prepare the material. It is necessary to clean the plastic from dirt, fat traces, residues of special coatings.

It is worth noting that if the plastic is framed by another material, then it is necessary to glue it with a painting ribbon, so as not to scratch the plastic during grinding.

After the material is ready for processing, take the waterproof skin, initially a rather large texture, and begin to grind. Here is the main accuracy. Slowly, centimeter for centimeter process the surface, following the material not overheated. Very well grind plastic in soapy water. If possible, you can use a special grinding machine, it will significantly reduce the time spent on this stage, but in this case the water should be refused!

When you see that deep scratches are equal to, it is worth replacing the skirt on the smallest and continue in the same way. It is worth changing a few varieties of skins, moving from large to smaller, before you get the desired effect. In order not to miss the errors, after each stage, wipe plastic with a dry cloth, so you will see all the shortcomings and you can fix them on time.

Polishing plastic

So, we got rid of scratches. The next stage, no less labor-intensive, will be polished, which will make the product almost new. How to polish plastic so that your hands do not spoil the thing with your own hands?

After grinding, the surface has become smooth and matte, and when polished, it is necessary to achieve smoothness and brilliance of the material. In the modern world, many car dealerships and companies offer polishing plastic. However, a special paste is used for this, which can be bought in each auto shop and simple devices. The choice of polishing pastes is quite large, the first, from what should be pushed - this is the choice of paste for plastic! To be taken into account, when you buy it, otherwise, in fairness, you can not revive the subject, but finally spoil. Contact a consultant in the store, he will certainly advise the one that will suit you.

Also, many advise to use gay paste, which is taken to polish the blots on the belts from the soldiers. But this option is suitable rather for large items that do not require special transparency. For small parts that require maximum polishing quality, it is still worth using specialized pasta, because they are able to return the brilliance and transparency of plastic.

There are many ways to polish themselves - someone makes it yourself, someone drill, someone grinding machine.

Manual polishing plastic

So, you decided to polish the surface you will be in manual. An option suitable for small surfaces and small parts. Let's start with the paste, which was talked above. Such a paste must be absolutely uniform, without any grains and impurities, to give a larger gloss, you can add some oil to it. Apply it better with a piece of felt or felt. By covering the entire surface of the subject, start polishing. Light circular motions, with a small pressure, polish the surface of 15-20 minutes. If the item was not badly damaged, then you will like the effect. But if the wear is essential, then it will be necessary to polish much longer.

How to polish plastic by a drill with a drill.

The second method is polishing with a drill, implies the presence of this tool in your arsenal. If the drill is available, it works, and you can use it, I boldly walk to the store for a special polishing nozzle. There is such a nozzle fairly inexpensive and buy it will not be difficult. However, do not forget to say the seller that polishing will be performed using the nozzle. It is easily attached to the drill and allows you to quickly achieve the desired result. With this technology, you can polish a variety of products, and most often it is used for automotive headlights, which makes them transparent and smooth. In this case, it is also worth using special pastes, because they are, in conjunction with their own handling, give an ideal result.

In this embodiment, you can save somewhat, replacing the grinding nozzle with a piece of felt, which is inserted into the cartridge drill. Polishing felt is very effective, but it is necessary to fix the material well enough, otherwise the cloth will pop up and give you a lot of inconvenience.

Polishing plastic with a polishing machine

And the third option is polishing with a polishing machine. Not in every house there is such a device, however, it is quite useful and comfortable. It is always useful for polishes to polish with their own plastic and headlights. And in the house you can always easily polish any item, spending just a few minutes. Therefore, if the budget allows you and you are sure that this thing is useful to you, that is, it will have to often polish, it is worth buying such a machine. You can find it in any power tool store.

Before the final polishing, it is worth walking along the plastic surface with a moal nozzle of a polishing machine, so you get rid of the remnants of pollution and prepare the surface to the final stage. At the final stage, special pastes and a special foam circle should be used. Watering plastic. It takes this process 2-3 minutes, so the saving time and strength is provided to you.

Polyrol processing

After each of the types of polishing, it is worth covering the surface with a special polyroller for plastic. Using any of the devices, apply polyrolol on the plastic with a small layer and a well-spinning with a nozzle or cloth, and then pass the surface using the tool. This little nuance will complete the process and consolidate the result. After all, you will be pleased with the result.

It is also worth remembering that if the plastic object is exposed to water, the layer created by pasta and the polyrolla is washed over time. Therefore, we spend the polishing of plastic with your own hands as soon as you notice that the item began to fill. This will help keep the effect long enough.

So, with the help of simple devices, special means and small snarling, you can give the second life to many plastic subjects. It is only worth responsible to approach this issue and take into account all the necessary nuances. Polishing allows you to save sometimes quite decent amounts of money, and if you have time, even earn money. After all, now you know how you can polish the necessary item and you can do it not only for yourself, but also for others.

When operating a vehicle, scratches appear on plastics in the car. Defects spoil the type of dashboard, and a large amount of such damage leads to the appearance of microcracks and the destruction of plastic. Knowing how to remove scratches on plastic in the car's cabin, the driver returns to the details of the initial species, avoids more serious repairs and replacing damaged elements.

Scratches on the Torpeda plastic - frequent phenomenon. Various objects, or even opening and closing doors, can cause their appearance. This is due to the fact that plastic surfaces do not have a shockproof coating, and the slightest mechanical impact leads to flaw. Small defects, deep scratches on the instrument panel spoil the view of the auto interior as a whole. but such damage can be corrected without dismantling plastic elements.

Straight sun rays lead to the burnout of the paint on the cabin elements of the car. To restore such a detail, you will need to overhaul the element.

How to remove scratches on plastic in the car

To remove scratches from plastic in the car, use several ways:

1. Small defects are eliminated by thermal exposure. This uses a hairdryer or lighter.
2. Small damage is removed by special regenerating napkins and towels.
3. Deep defects are painted by car wax pencils.
4. With glossy surfaces, scratches are removed by polyrolles and abrasive gels.
5. Cracks, chips and deep damage to the paint coating of the torpedoes are eliminated by capital repairs of the part.

Repair of corrugated surfaces is not possible. They are not amenable to polishing and heat treatment. When wearing such elements, they are replaced with new ones.

Restoring pencils and napkins

One of the most simple methods for restoring the type of damaged part is the use of special napkins, microfiber towels and a pencil to remove scratches from plastic. However, the use of these funds that eliminate defects has a number of nuances:

1. Napkins and towels are allowed to get rid of small scratches of the plastic surface of the car dealership.
2. Deep chips and scratches can be lured by a special pencil. These devices are sold in auto shops. The advantage of such a means consider its effectiveness. The substance fills in defects, gives the surface of the primordial appearance. However, only the original pencil can cope with the problem can cope with the problem. Its cost is high, and Chinese cheap counterparts, if the car is scattered, there can be little to help.
3. When painting, pick up the closest color of the pencil to the shade of the dashboard. Otherwise, after restoration, black traces remain on the surface, spoiling the type of detail.

Using a fane

Plastic damage can be eliminated with their own hands with a hair dryer. Previously before heating, the processed area is cleaned of contaminants and degrease. After, turn on the hairdryer to maximum power and very closely monitors the reaction of the plastic for heating. When exposed to high temperatures, smoothing the defects, the item acquires a primordial appearance.

If there is no reaction to heating with a hairdryer, then you need to increase the power of the device, and bring it closer to the surface being processed. Deep damage cannot be eliminated in this way. Excessive heating will lead to the deformation of the plastic element, and worsen the appearance of the detail.

Polyrols and gels

After eliminating scratches on plastic, it is necessary to refill the item. This is important when repairing glossy salon elements. The means will return the surfaces of the primordial appearance. For polishing, it is recommended to use an abrasive skirt or grinding machine. Using an electric tool cannot be eliminated by defects on the maximum turnover of the grinding circle. Plastic is heated and deformed, which will lead to expensive repair.

Also, special attention should be paid to the means used when restoring the damaged area. To protect the material from deformation or destruction, use a special abrasive paste and polyrol for plastic.

The elimination of defects is performed according to the following algorithm: before polishing the surface is washed, dried and degreased. Next cause a small amount of funds, and before the appearance of the glossy shine polished the part.

Using polishing, small scratches with a glossy surface are removed.

Removal of damage lighter

With open fire, remove scratches from plastic. For this, the lighter is made to the defect, and is carried out with a flame over the entire area of \u200b\u200bdamage. After the surface treated in this way completely cools, moistened in the alcohol with a tampon is removed soot. If everything is done correctly, then after such a procedure, plastic is restored.

When using a lighter should be careful. Otherwise, the open fire will cause damage to the trim and fire of the vehicle.

Overhaul plastic

It is not always possible to repair plastic in the cabin of the car in simple ways. Squares, cracks, sections of burnt paint - all this requires the overhaul of plastic elements of the dashboard of the car. Recovery is performed as follows:

1. A damaged item is dismantled.
2. Carefully cleaned from dirt, degreases and polished.
3. Cracks and chips are embarrassed by primer.
4. The surface is grinning.
5. Apply paint, give an element to dry.
6. Covered several layers of varnish.
7. Polish before the appearance of glossy glitter.

How to remove scratches from gloss

When making many elements of the cabin, transparent plastic is used. The disadvantage of such a material is the rapid appearance of defects: small scratches and chips, after several years of operation of the machine, literally cover the entire surface of the cabin element. Removal of scratches of plastic car salon has a number of nuances:

1. Before recovering, you need to hold a wet cleaning of the machine. It is necessary to monitor the lack of dust. Otherwise, when polishing on the surface, new scratches may appear.
2. The processed area will need to be carefully flushed and degreased.
3. To get rid of scratches, use a grinding machine.
4. To polish a damaged place, it is recommended to use the means that are designed for plastic grinding. These are special polishes and abrasive pastes. It is important to correctly calculate the amount of substance applied.

Abrasive pastes, gels and polishes that are intended for can not be used when restoring the cabin. They will spoil the recoverable item.

Numerous defects, scratches, chips and cracks spoil the type of torpedoes of the car. Damage to this plan is easy to eliminate yourself. In order for the repair process to be effective, and did not lead to the replacement of the part, consider the nuances of the restoration of plastic interior elements.

What if the plastic molding or other detail of Oldtimer, made of plastic, lost the appearance, the color or hanged and began to collapse and began to collapse? Despite the strength of the ABS plastic, it is strongly susceptible to the negative impact of the external environment.

Plastic elements in the cabin and exterior of cars began to appear in the second half of the 20th century. For example, in the American automotive industry, the plastic era began to actively develop in the 1970s. From an economic point of view, this was a real discovery - the material was quite durable, durable, inexpensive in production. However, nothing is forever, and the time still takes his own. Under the influence of ultraviolet rays, the plastic gradually burns out in the sun, becomes bell and "worn", and in the case of the external decorative elements of the body there is another aggressor - reagents that sprinkle and watered roads during the cold season. In addition, in the process of active operation, scratches and cracks will inevitably appear.

As a rule, plastic elements of the body are made of material under the complex name of acrylonitrilbutadienstyrene, or simply ABS plastic. This is a shock resin, resistant to moisture and oil. From this, the polymer was very popular in the automotive industry and details of the interior. However, the material is poorly tolerated by ultraviolet radiation, and some types of this plastic are even destroyed under the influence of sunlight. In 1998, this led to one of the most large-scale car reviews in the history of the United States - the security belt button made from an abscess of ABS plastic unstable to ultraviolet. As a result, 8,800,000 cars hit the response.

Well, if the item has kept its integrity, but it just emerged from time to time. In this case, you can do the upgrade of the upper layer. For this, a whole series of funds that restore the color of the details and extending its service life was developed. Some of them even add flexibility details, which over time is lost, thereby reducing the risk of breakage. The American publication Consumer Reports conducted his own research, studying the characteristics of the funds presented in the market. Depending on its characteristics (and, accordingly, costs) preparations provide details protection for a period of two weeks to two years. It is worth noting that Consumer Reports analysts considered only the means for plastic elements of black color, although it is not difficult to choose the necessary kolker today. The test was carried out in a sufficiently funny format: the plastic lining of the body was divided into several parts (by the number of funds participating in the test), were treated with test compositions and ... put 10 weeks to the roof of the building, in which, in fact, the editorial office of Consumer Reports. Each week, the panels were filmed, soapy, dried and sent to the roof again.

In the opinion, according to experts, the harsh test of the scoring sun and heavy rains was kept samples covered with Renu Finish and Wipe NEW - covered parts retained bright black color throughout all 70 days of test. Minus both tools are that they are sold in bottles of small volume, and at the same time it is noticeable more than analogous. Although the difference in the results of the experts was recognized as tangible. The remaining means (Turtle Wax Premium Grade, Meguiar's Ultimate Black, Mothers Back-to-Black) showed a vigorous start, but by the end of the test all the parts treated with them were fused.

The former color of the plastic can be returned to the construction hairdryer: with a neat uniform heating, the kel performs on the surface of the part. For black plastic parts, it is possible to use the ink of bumpers (for example, Hi Gear or "Astrochim"), however, judging by the reviews, the item quickly quickly loses an attractive look.

Construction hairdryer can help refresh the appearance of the detail, but, unfortunately, this is a temporary measure.

But what to do if the plastic element of your car received a serious crack, and we are not talking about molding, but about the whole body panel? In this case, welding will help, but everything is already much more complicated here, and it will be better to refer to specialists. The fact is that the ABS plastic unites the whole family of materials whose characteristics depend on the proportions of the components - acronitrile, butadiene and styrene. Depending on the proportion, each type of plastic has its own melting point, and hence the welding temperature. If during welding to choose too high temperature and steam plastic, the material will begin to foam and freeze in a porous state, which is why the welding seam will be fragile and short-lived. It is logical to assume that with insufficient temperatures, the plastic is very badly melted, and the solid seam will not work. Therefore, during welding, a special hairdryer is used, on which it is possible to manually specify the exact temperature value depending on the type of plastic.

However, if it is not required for solid strength from the part, then you can do the simplest ways, which are actually enough: for example, use the epoxy resin, to sneak the damaged section of fiberglass or reinforce the metal grid. The simplified method of recovery includes a soldering, which must be distinguished from welding. Actually, the difference is that when soldering is extremely difficult to "get" in the desired temperature, so the seam is obtained by fragile and porous. Enough in order to visually hide the defect, but the strength and durability will not provide. In any case, the first thing the part must be thoroughly rinsed using a cleansing agent intended for removing tar, salts and other mud. To do this, you can use a special cleaner of bitumen spots. Market offers Mass: AC-395, Hi Gear Buster Bug, Pingo Tar Remover, Liqui Moly Teerentferner and others. By the way, it is possible to take advantage of the grandfather's way - "White Spirit" or kerosene. Also, it will not be superfluous in the detail of the brush. For this purpose, the brush is best suited.

Finally, a very "hard case" - if the item is not subject to light recovery, and it is easier to replace it than to restore. Well, if we are talking about the mass model of the car, which is easy to find the necessary details. And what if you have a rare copy for which it is practically unrealistic to choose components? To date, in addition to fiberglass, 3D printers are gaining popularity. Over the past two years, the mass of the initiatives at the industrial and scientific level has found its application to master the three-dimensional printout technology in the automotive industry. Recently, TECHMER PM, specializing in the modification of polymers, even presented even a full copy of the legendary Shelby Cobra, fully printed on a 3D printer. So the company demonstrated that this technology may well be used when restoring old cars. True, in this case the authenticity of the car is lost, which is undesirable when working with autoclassic, and the technology itself is still developing and therefore is quite expensive pleasure. However, the increasing percentage of using three-dimensional printing in the automotive industry allows you to hope that over time this option will become more accessible.

This Shelby Cobra is fully printed on a 3D printer.

Plastic parts of the cabin are not easier: the cabin is protected from road reagents, but suffers from sun, large cargo and non-accuraant passengers, earning scratching, scratches and cracks.

However, to update the plastic parts and return them to them by the former novelty, and budget funds. If the car is already elderly and represents a certain historical value, with a competent approach, it is possible to increase its value of dollars by 500, while spending ten times less. Although, of course, it all depends on the scale of the problem.

To begin with, the surface of the plastic interior details must be cleaned. A number of American specialists, in particular, the American restorer and the leading Stacy David, advise the use of trinitium phosphate - a compound that makes up the basis of various detergents and cleaning products. The next stage of preparation for painting is to provide a sufficient clutch of the surface with the paint you are going to apply. To do this, you can use a special adhesion amplifier (Stacy David recommends Duplicolor), which will provide a reliable clutch, acting as the primary layer-primer before applying the main paint. If this is not done, the new coating will fall on the old paint and it will be bad - quite soon the item will have to be repainted again. As an additional binder agent, the first, rough layer of paint is also used. In the case of a plastic salon, a very popular tool is vinyl paint (the so-called liquid vinyl) of the type of Plasti-Kote or the same duplicolor. Which of these brands is better - the question is controversial, and the opinions of Western restorers on this issue are diverged. Paint is applied in several layers, for reliable consolidation. It is at this moment that there is a magic: the old detail turns into a new one, as from the factory, and all the years of its services are hidden under a layer of fresh paint. Final barcode - Processing Details with a special reducing agent to impart brilliance and additional protection. ARMOR ALL AND BLACK MAGIC is used in demand.

Refresh the item can be without coloring. To do this, after the washing stage, the part is dried, and then treated with sandpaper, stabbing all small irregularities. However, it is not necessary too much to be carried away - quite the "gentle" from coarse-grained, 6-H, which is usually used for the final grinding of soft wood. After that, the part gently and evenly warmed the usual hairdryer, while wiping the element with a clean rag without a special pressure. After such processing, the part is noticeably raised, but with strong failures, the homogeneous texture of the plastic will not be completely restored.

If there are also cracks on the part to the whole, you can fight with them with a simple superclay, which is applied along the entire length of the crack. For additional stiffness and durability, you can go through the same place from the inside by the adhesive gun - it will give a guarantee that the crack will not disperse. Surplus of dried glue are stitched with sandpaper.

A somewhat different things are doing with steering wheels with a plastic rim. The lacquer layer is concentrated, after which all cracks and scratches are drilled and expand so that it is easier to fill damaged by epoxy resin. Many at this stage use a standard two-component epoxy resin, but can be used, for example, a filler called Bondo - 3M production brand. He became in America for almost a nominal name, in fact - automotive grinding mastic. When the mastic is freezing to the state of the molten cheese, the author recommends processing the scene of a coarse sandpaper 25-h. The main thing is not to waste time and do not hesitate the right moment: completely hardened mastic Bondo is very problematic to grinding sandpaper.

Andrei Schuldeshov

Plastic has long become one of the most sought-after materials for the manufacture of various things. It meets in toys, electronics, appliances, cars and interior items. But over time, any white plastic products begin to acquire yellow shades. The reason for the impact of sun rays, sharp changes in temperature, incorrect care and natural reactions with oxygen. In such situations, you can try to whiten the yellowed plastic to return it to the former beauty.

Special attention deserved windows. Plastic structures used in a pair with glass are very often yellow under the influence of ultraviolet emitted by the Sun. Bright rays can illuminate them all day. If this happens regularly for several years, then the appearance of a yellow shade is inevitable. Additional factors are sharp temperature differences and improper operation.

The composition of the plastic used for window elements includes various substances capable of extending its service life. Therefore, clean the windowsill should be careful. It is impossible to use:

• Dishwashing agents;
• Rigid sponges;
• Abrasive powders;
• Acetone and close in composition by means;
• Alkaline substances;
• Hot water.

All other means of getting rid of yellow spots can be applied without fears.

How to whiten plastic

Return the former type of plastic products is not so difficult. It is possible to do this at home without assistance. You only need to stock all the necessary means that will be used to achieve the goal. There are several cleaning methods.

Useful plastic whitening video - Video:

A simple but very effective means. Economic soap will help to update the old plastic, again giving it a white shade. This method shows the maximum effectiveness when color changes are caused by the effects of a fatty tank.

How to act:

1. Grasp (½ bar).
2. Pour warm water (150 ml), mix.
3. Finished solution to apply to a problem area. Wait 30 minutes.
4. Wipe with a clean sponge, wash soap traces with clean water.

You can use this method in any cases, since soap is harmless.

Special napkins

Special napkins are sold in electronics stores. They include various substances that are capable of cleaning computer techniques without any harm from pollution. They help and when yellowing.

How to clean:

1. Every 6 hours wipe the yellow napkin trail.
2. Repeat daily within a few days before the complete disappearance of yellowness.

This option is ideal for household appliances and plastic windows.

Tooth powder with chalk

Such an unusual mixture allows you to return the white color of things if the shades of the yellowness appeared quite recently. You can try it and for old stains, but it is hardly possible to achieve significant results.

What do we have to do:

1. Mix a small amount of chalk and dental powder.
2. Add water to get a thick cashet.
3. Distribute over the entire surface of the plastic, wait for drying.
4. Remove with a dry rag of powder residues.

The procedure can be repeated repeated.

Soda and washing powder

Food soda is very often used to clean different things from dirty spots. She also copes with the yellowness.

How to apply it:

1. Stir soda (1 tbsp. L.), Washing powder (1 tbsp. L.) And water (500 ml).
2. Apply liquid to plastic object. Wait 8 hours.
3. Wash off all traces of raw rag.

Excellent option for cleaning windowsill.

Vinegar

No less efficient way to return whiteness to plastic products is acetic acid. To do this, it will be needed 70% solution.

Cleaning process:

1. Moisten a soft cloth or a large cotton disk in vinegar.
2. Wipe plastic.
3. Wash the surface of the subject.

When using acid, we should wear rubber gloves and air the room. It is also not recommended to use a means for getting rid of yellowness on sensitive plastic.

Chlorine citric acid

The powerful tool for bleaching is yellowness, which can be used for thin plastic products, without fear of their integrity.

How to use:

1. Mix the same amount of citric acid and chlorine.
2. Apply to stains. Wait 30 minutes.
3. Remove the remnants of the means.

This mixture can be applied multiple times until it turns out to return the yellowed plastic to the usual mind.

Hydrogen peroxide

This medical device is very popular and present in each first aid kit. It helps not only to disinfive the wounds, but also to put the surface of the yellowed plastic.

Mode of application:

1. Wheood with a soft sponge peroxide.
2. Muchly wipe yellow spots.
3. Mix the remaining traces of peroxide.

The tool does not harm plastics. Therefore, it is allowed for a long and multiple application until the required result is obtained.

Alcohol

Alcohol received great popularity in cleaning against pollution. It destroys the composition of any dirt, making things again clean. No less effectively, it helps to whiten the strongly yellowed plastic. Its composition does not just remove the yellowness, and literally destroys the structure of the upper layers of the subject. Therefore, they should use with caution.

How to apply alcohol:

1. Wet the rag in it.
2. Wipe the yellow parts of the surface.
3. Remove all alcohol traces with clean water.

This method is suitable for rough dense plastics on household appliances and various devices.

Acetone

Another very aggressive solvent, which is capable not only to lighten plastic, but also damage it. Before use, it is recommended to apply a small amount of acetone to an invisible area of \u200b\u200bthe subject to check the reaction. If everything is in order, you can use it. Nevertheless, caution still will not be superfluous.

Whitening:

1. Moisten a tight cotton disc acetone.
2. Wipe plastic.
3. Squeezed with a wet cloth traces of the means.

Instead of acetone, you can use liquid for removing varnish. Its composition is not so harmful for the coating, but shows a smaller efficiency.

Special plastic restoration tools

Return to the initial species of white plastic objects can be used using special means that are designed to restore plastic in cars. You can buy them in auto repair shops and spare parts.

How to use:

1. Apply to the problem zone, following the instructions.
2. Wait for drying.

Before use, you should definitely read the instructions.

Bleach

Option for small sizes. He implies a full soaking of things in Chlorine.

How to do it:

1. Dissolve chlorine or bleach (1 tbsp.) In water (1 l), adding some soda (1 tbsp.).
2. Put in a container with a liquid that needs to be restored. Leave for night.
3. Get and thoroughly rinse the object under cool water.

With very strong yellowed, soaking in the pure bleach without breeding it with water.

conclusions

The listed methods should be enough to cope with the problem and return their white plastic. If the yellowness is very old and will not succumb to one to the medium, it can be simply gently to wear out paint, as suitable as possible, or paint all the entire product. So it turns out to hide all the problem areas.

In the production of modern cars, not only metal, but also plastic, which loses its properties and an attractive appearance over time. First of all, it concerns external details, for example, headlights. Sand, pebbles, precipitates lead to damage to the outer elements, plastic dumps. Glass headlights becomes less transparent, which increases the risk of accidents. Cigarette smoke and ultraviolet can seriously spoil the appearance of the interior elements of the machine, they become dull, and white yellow color. Not only is the view of the car becomes not so attractive as before, the lighting of the road is so also deteriorated. However, there is a way out of this unpleasant situation - to polish the car from the car from the plastic or in the car service, or at home.

Favorite and polishing features

The processing of plastic parts of the car has a number of undoubted advantages:

• simplicity;
• it is possible to apply at home without the use of special devices;
• antistatic properties purchased by plastic, not allowing dust to gather.

Plastic allows the use of a variety of working methods with it, but conventionally can be divided into such groups:

• processing of medium-heated abrasive compositions;
• work with fine-grained polyrollas;
• processing with abrasive means.

The greatest efficiency can be achieved by combining these methods. The process of working on the restoration of the appearance of plastic parts can be divided into such steps:

1. processing;
2. actually polished.

To successfully polish the plastic of the car, it is necessary to choose high-quality compounds in a package convenient for applying and storing. For independent daily car care at home, the best funds are suitable for aerosols, sponges or napkins impregnated with the composition.

• Sponges, for example, the British carplan agent, cost inexpensively, allow you to quickly remove dust, polish plastic parts perfectly, leave a pleasant citrus smell.
• Napkins, example - Carwet, Russian production. Cheap, take up little space, effectively remove dirt, scratches and stains.
• Aerosol, in particular, the Italian Lucida Cruscotti, Polish Atas Plak - these and other means are rapidly applied, eliminate small damage and give shine. Polish with their help - the present pleasure.

For more solid work on the restoration of plastic parts, more complex compositions will be required.

Among the means that allow at home to bring the plastic elements of the car in order and qualitatively polish its surface, it is worth highlighting gel plasticizers and restorers.

The effectiveness of their use directly depends on the quality of the compositions, the type of plastics and the degree of damage. The presence of paint and varnish and glass also require special attention to the polishing process.

For example, to update and even the restoration of plastic, as well as the lounge of the cabin, the restorer is best suited. After applying, he penetrates deep into scratches, completely filling the space. A gel plasticizer, with which a factory picture of the part is obtained, impose on damaged elements, which allows plastic again uniform.

At the second stage, it is possible to polish plastic - it is important here a selection of vehicles for work, which should be clean, preferably without a pile so that there is no sticking on the surface.

Technology of work

So, the front of the work is outlined, the composition is selected. It's time to start work. In the process of bringing the following steps in the process of headlights:

1. The head of the headlights is cleaned and dried, and the place around is stuck with painting tape. Disassemble the headlights optional.
2. The degree of damage, the depth of scratches is estimated. Then, with the help of the skin, the headlight surface is made matte. The degree of grain is depends on the depth of scratches, the more, the more coarse material is used at the beginning. So gradually go to the fine grain. When working the machine, it is recommended to use grinding paper from P 320 to p 1200. If everything is done correctly, the glass lights will be smooth to the touch and muddy.
3. In the final, it is possible to polish with a grinding machine in a car service or manually in the home. By the way, the grinding orbital machine will reduce the time of work 4 times, while ensuring high quality.

Work on the parts of the car's cabin takes less time. At the beginning, the selected composition is applied on the plastic, and then try to polish everything to the desired state. A total of such an order:

1. Clear parts from pollution and stuck with painting tape sealing surfaces.
2. Apply a restorer or gel on plastic, acting according to the instructions. In the first case, after the restorer composition is absorbed, with the help of a fine-grained skin, remove its surplus. In the second, apply a surface pattern on the restored area, made as a cast from an intact area with a gel.
3. Distributing the remedy, sprinkle with a small amount of water and polished with a machine using it on small revs or manually. If the plastic is dark color, then it can be polished with an antgologram composition.
4. Remove balance residues, fling out the surface.

If you adhere to the instructions and perform simple rules of work, then even at home, an inexperienced driver will be able to achieve an excellent restoration of parts. The car will retain a fresh well-groomed appearance, glass transparency, and the headlights brightness, which is very important for a safe movement in the dark and foggy time.