The heater is controlled either remotely - from the Telestart T91 remote control or by telephone using the Thermo Call system, or from a digital timer installed in the car. The heater can be equipped with one of the listed control systems or any combination of them - this is negotiated separately when purchasing / installing the heater. Learn more about our control systems here
Is it true that the use of a heater increases safety?
Statistics show that in winter most accidents occur in the first 15 minutes of a trip. The reason for this is the limited visibility and increased driver reaction time when low temperatures. Preheater, warming up the interior and contributing to defrosting windshield, helps to solve these problems and thus increases the safety of the trip.
Does the heater use a lot of fuel?
One of the main areas for improving Webasto heaters is to reduce their fuel consumption. Currently for heater operation Thermo top Evo with a full load requires no more than 0.7 liters of fuel per hour. In addition, since the heating efficiency is very high, as a rule, the desired temperature in the circuit is reached earlier, and the control unit of the heater automatically switches it to the economical mode of partial load. In addition, a warm engine consumes less fuel, this usually compensates for the additional fuel consumption of the heater.
My car is equipped with air conditioning (climate control). Can a preheater be installed on it?
Installation on most modifications of cars equipped with air conditioning or a climate control system will not encounter any obstacles. May need additional work for setting up on-board electronics, as well as installing the relays necessary for this, etc. – in any case, the additional cost of time and money for this is relatively small. Regarding the use of the heater: depending on the air conditioning / climate control system installed in your car, during the preparation of the heater for operation (i.e. before you leave the car in the parking lot), you may need to press 1-2 additional buttons. Webasto develops for such vehicles special instructions both for installation and use: you can find details in our service centers!
What is the difference between Thermo Top Evo 5 and 5+ heaters?
Both models have a heating output of 5 kW and operate max. 60 minutes. Thanks to the optimized control of the cooling circuit, Thermo model Top Evo 5 provides enhanced feed warm air inside the vehicle by warming up the engine. In temperate European climates and for those whose priority is cabin warmth, the Thermo Top Evo 5+ is often preferred over the '5' model.
Sorry, this model is only available on European market, but in Russia we offer you a special retrofit kit for Thermo Top Evo 5, with which it works similarly to the “5+” model. And for SUVs with engines larger than 4 liters, we recommend the powerful Thermo Pro 90 heaters.
Liquid preheater-heater Webasto Thermo Top Evo 5 - the best option for cars and cabins cargo vans with an engine capacity of 2 to 4 liters and running on gasoline . The package does not include a control (purchased separately).
The Webasto liquid heater is installed under the hood near the engine and uses fuel from fuel tank car. The heater is powered by onboard network car and consumes about 33W.
Advantages and advantages of Webasto Thermo Top Evo 4
No. 1. Very fast warm up
By installing Webasto TT Evo 4 in your car, you will sit in an already warm interior and start the engine without difficulty. And you don't have to clean the glass. If before, without Webasto, you had to wait until the engine warms up and tear off ice and snow from the windows, now you can forget about it! Webasto Evo 4 will not only fully prepare the car for the trip by your arrival, but will also do it faster than all models of previous generations.
As for glasses, it should be noted that the Webasto heater saves them not only from snow and ice on the outer surface, but also from water condensate on the inner one. Thanks to the heater, you are guaranteed excellent visibility right from the start of your journey.
No. 2. Battery load and fuel consumption
While the efficiency and warm-up speed of the Evo 4 is higher than other systems, the heater later turns on the fan of the car's standard heating system. And thanks to this, the battery charge is preserved. In addition, the heater only has a positive effect on fuel consumption (increases engine life) and, in addition, reduces the concentration harmful substances in his exhaust.
One of the advantages of Webasto is the low power consumption, which is now 21 watts. In addition, the boiler of the Evo 4 model is protected against undervoltage, which will prevent the battery from being drained. So you are definitely not in danger of getting into a situation where the car is warm and warm, but cannot drive, because. there is nothing to turn him on.
Number 3. Reduced dimensions and the smallest weight
The pre-heater Webasto TT Evo 4 is characterized by minimal dimensions and maximum performance. The size of the device (218 x 91 x 147 mm) allows you to install the heater without any special difficulties and any alterations even in the car where there is very little free space under the hood.
Since the size of the heater has decreased, its weight has also decreased. Evo 15% smaller and 30% lighter than TT previous models. On the this moment it is the lightest heater ever. Its weight is only 2.1 kg.
No. 4. Stable operation and system security
Even if in the car will fall on-board voltage, the speed of the blower motor will remain stable, which means that the performance of the Thermo Top Evo is maintained. Switching off the heater in case of voltage drop occurs in the start phase and in the course of stable operation at various threshold voltage values. This ensures both the operation of the heater and the possibility of starting the engine.
The heater is different high reliability thanks to the ceramic glow pin, and the burner with ceramic-metal gasket is reliably protected from overheating and wear.
Webasto is made in Germany.
Warranty: 2 years from the date of purchase.
Control
The Webasto package does not include a control. The heater starts automatically at the set time. To be able to control the heater, you can buy any of the following controls:
- Mini timer 1533 (allows you to start and select the duration of the device)
— Thermo Call 3 remote control system (allows you to control the heater using mobile phone)
- Special control panels that allow not only to start the heater, but also to program its operation remotely.
DELIVERY SET WEBASTO TT EVO 4 PETROL
|
Name |
Note |
|
| Replacement heater for Thermo Top Evo 4 12V petrol | ||
| Circulation pump U 4847 econ 12V | ||
| Dosing pump DP 42 12V (gasoline and diesel) |
with fasteners packing |
|
| A set of fittings for connecting to a heater 2x900 Ø18mm, two spring clamps Ø25mm. |
2pcs - 900x18mm |
|
| Package with connecting fittings. Contents: angle fitting 900x - 2 pcs, self-clamping clamp Ø25mm - 6 pcs | ||
| Package with connecting fittings. Composition: angled fitting 900 - Ø18x18mm - 1 pc, straight fitting Ø18x18 mm - 1 pc, self-clamping clamp Ø 25 mm - 6 pcs | ||
| Liquid hose L= 2mØint.= 18mm, Øext.= 18mm | ||
| Pressure plate for liquid connections, two rubber seals, mounting screw. | ||
| Package with U4847 econ circulation pump bracket, M6 captive nut, M6 bolt, sleeve | ||
| Package with exhaust clamps and fasteners. Composition: exhaust clamp Ø 24 - 26 - 3 pcs, mounting plate - 1 pc, metal clamp - 1 pc, M6x20 bolt - 1 pc, M6-16 bolt - 1 pc, M6 nut - 2 pcs, grover washer - 2 pcs. L-bracket — 1 pc. | ||
| Fastener package. Composition: M6x20 bolt - 4 pcs, torx heater mounting screw - 4 pcs, M6 nut - 4 pcs, washer - 4 pcs, Grover washer - 4 pcs, M5x15 bolt - 1 pc, M5 nut - 2 pcs. | ||
| exhaust muffler | ||
| Exhaust pipe | ||
| Package with remote metallized, heat-resistant rings (red) | ||
| Air intake pipe Øint 21.4 mm, L= 400 mm. | ||
| Bag with intake air silencer, retainer. | ||
| Packing of cable ties. | ||
| Bracket standard | ||
| Package of connecting fuel pipes -3 pcs, snap-on clamps (4 pcs) | ||
| main wiring harness |
Sealed |
|
| Fuse and relay holder (interior) |
Not sealed |
|
| Circulation pump harness | ||
| Package with elements for power connection of the interior heater fan motor. Composition: wiring harness with terminals for connecting to the relay - 1 pc, five-pin relay - 1 pc, fuse 25A - 1 pc, connecting sleeves - 2 pcs. | ||
| Fuel pickup package. Composition: fuel intake - 1 pc, connecting fuel pipe L=50 mm - 4 pcs, connecting pipe 40 mm long - 4 pcs, snap-on clamp Ø 10 mm - 2 pcs, screw clamp Ø 10 mm - 8 pcs | ||
| Fuel pipe, black | ||
| Documentation package |
SPECIFICATIONS
|
Heater |
Thermo Top Evo-B |
Thermo Top Evo-D |
|||
| 5 kW | 4 kW | 5 kW | 4 kW | ||
| EC certificate numbers |
e1*2001/56*2006/119*0258*… e1*72/245*2006/96*5627*… E1 122R-00 0258 E1 10 R-03 5627 |
||||
| Design |
Liquid heater with evaporative burner |
||||
|
Heating capacity |
5.0 kW | 4.0 kW | 5.0 kW | 4.0 kW | |
| 2.8 kW | 2.8 kW | 2.5 kW | 2.5 kW | ||
| Fuel |
Gasoline EN 228 DIN 51625 |
Diesel fuel EN 590 |
|||
| Fuel consumption +/- 10% | 0.705 l/h | 0.560 l/h | 0.620 l/h | 0.495 l/h | |
| 0.395 l/h | 0.395 l/h | 0.310 l/h | 0.310 l/h | ||
| Rated voltage | |||||
| Working voltage range | |||||
| Rated input power without | 33 W | 21 W | 33 W | 21 W | |
| circulation pump +/- 10% (without car fan) | 15 W | 15 W | 12 W | 12 W | |
| Permissible ambient temperature: | |||||
| Heater - work | |||||
| - storage |
40 … +120 °C |
40 … +120 °C |
|||
| Dosing pump: - work | Summer fuel | ||||
| Liquid fuel | |||||
| - storage | |||||
| Permissible operating pressure coolant | |||||
| Heat exchanger volume | |||||
| Minimum amount of coolant | |||||
| Minimum volumetric flow for heating medium | |||||
| CO2 in exhaust gases (allowable range) |
8 - 12.0% by volume |
||||
| Heater dimensions without mounting parts (tolerance ±3 mm) |
L=Length: 218mm |
||||
| The weight | |||||
Warranty 2 years
100% German original heater
Post-warranty spare parts support
Webasto Thermo Top Evo 5 diesel is autonomous engine preheater for cars with an engine capacity of 2 to 5 liters. This autonomous heater from the company is a thunderstorm Russian market autonomous heaters. Webasto thermo top Evo 5 diesel is the best-selling autonomous heater in Russia and neighboring countries. Designed German company this heater has passed all the severe tests of the northern regions of our country and has earned the respect, trust and warmth of Russian citizens. In the Autonomous heater you can purchase the original heater Webasto Evo 5 gasoline at a very favorable price.
Buying Webasto EVO 5 diesel in Autonomous Heater You get not just a German heater, you get high-quality advice, a 2-year warranty, a guarantee of the best price from Webasto, additional discounts on Autonomous heater products and many other bonuses that we give to our customers.
Also, you can opt for your Webasto after the warranty period.
Webasto Thermo Top EVO 5 price
We guarantee best price on Webasto in Russia. We know the entire market of autonomous heaters very well and treat our customers with care, making the cost of webasto low and attractive. All this without sacrificing quality or service. You get a brand new Webasto Evo 5 with a complete set.
Cabin heater
In addition to warming up the engine, Webasto Evo able to warm up the interior of the car. Heater made in such a way that after warming up the motor to a certain temperature, it turns on the relay to which the standard motor is connected car heater salon. At the same time, the standard stove fan already supplies hot air inside the car, thereby warming it up. In vehicles equipped with CAN bus special digital modules for controlling the interior heater are provided.
Webasto Thermo Top Evo 5 buy
You can buy webasto 5 in various convenient ways. Autonomous heater made sure that our customers receive high-quality service and all modern methods of payment for the heater.
- Cashless way. At your request, we issue an invoice for payment. You pay for it and as soon as our accounting department fixes the payment, we begin preparations for sending Webasto Thermo Top.
- Sberbank card. Sberban.Online data is sent to your mail. You pay the bill.
- Bank card. The site allows payment by bank cards using a secure SSL protocol. This means that when you use the site, no one can spy on you and steal data.
- Payment upon receipt (Inspection of the attachment). After your order, we send the heater and you pay for it upon receipt. Please note that in many cities you can view the content before paying.
Delivery of preheater Webasto
You can buy Webasto by paying upon receipt at any of the points of issue.
Delivery of the Webasto Thermo Top Evo 5 diesel heater to such cities as Abakan, Arkhangelsk, Astana, Astrakhan, Barnaul, Belgorod, Biysk, Birobidzhan, Blagoveshchensk, Bratsk, Brest, Bryansk, Veliky Novgorod, Vitebsk, Vladivostok, Vladikavkaz, Vladimir, Volgograd, Volgodonsk , Volzhsky, Vologda, Voronezh, Vyborg, Gomel, Gorno-Altaisk, Grodno, Yegoryevsk, Yekaterinburg, Ivanovo, Izhevsk, Irkutsk, Yoshkar-Ola, Kazan, Kaliningrad, Kaluga, Kemerovo, Kirov, Klin, Komsomolsk-on-Amur, Kostroma , Krasnodar, Krasnoyarsk, Kurgan, Kursk, Kyzyl, Lipetsk, Magnitogorsk, Makhachkala, Minsk, Mogilev, Moscow, Murmansk, Naberezhnye Chelny, Nalchik, Naro-Fominsk, Nakhodka, Neryungri, Nizhnevartovsk, Nizhny Novgorod, Nizhny Tagil, Novokuznetsk, Novorossiysk, Novosemeykino, Novosibirsk, New Urengoy, Noginsk, Norilsk, Noyabrsk, Omsk, Orel, Orenburg, Penza, Pervouralsk, Perm, Petrozavodsk, Petropavlovsk-Kamchatsky, Pskov, Pyatigorsk, Rostov-on-Don, Rubtsovsk, Rybinsk, Ryazan, Samara, St. Petersburg, Saransk, Saratov , Sevastopol, Severodvinsk, Seversk, Serpukhov, Simferopol, Smolensk, Sochi, Stavropol, Stary Oskol, Sterlitamak, Surgut, Syktyvkar, Tambov, Tver, Tolyatti, Tomsk, Tula, Tyumen, Ulan-Ude, Ulyanovsk, Ussuriysk, Ufa, Ukhta, Khabarovsk, Khanty-Mansiysk, Cheboksary, Chelyabinsk, Cherepovets, Chita, Mines, Elista, Yuzhno-Sakhalinsk, Yakutsk, Yaroslavl, etc.
Webasto Thermo Top Evo 5 diesel is suitable for such popular car like Acura, Alfa Romeo, Audi, BMW, Brilliance, Buick, BYD, Cadillac, Chery, Chevrolet, Chrysler, Citroen, Dacia, Daewoo, Daihatsu, Datsun, Dodge, FAW, Fiat, Ford, Geely, GMC, Great Wall, Haval, Honda, Hyundai, Isuzu, IVECO, Jeep, Kia, Lancia, Land Rover, Lexus, Lifan, Maxus, Mazda, Mercedes-Benz, Nissan, Opel, Peugeot, Plymouth, Pontiac, Porsche, Rover, Saab, Saturn, SEAT, Skoda, SsangYong, Subaru, Suzuki, Tatra, Toyota, Volkswagen, Volvo, VAZ (Lada), GAZ, ZIL, IZH, LuAZ, Moskvich, TagAZ, Gazelle, Kamaz, UAZ, Kraz, Belaz and others.
Certified installation center All works performed in the site are certified. That is why the refusal warranty service on the part of the car dealership is illegal and car dealers do not void the warranty for cars equipped with us.
Installment for 6 months.
from 7 607 rubles per month It can be provided when purchasing goods and services of the company website in the city of St. Petersburg from 5,000 rubles. Detailed information can be obtained from the company's installation centers.
3 years warranty
for installation The quality of the work performed by the site allows you to provide a guarantee necessary for long-term operation vehicle. After the work done optional equipment will work properly in accordance with the manufacturer's warranty, all defects in the work are eliminated free of charge within 3 years.
Description Webasto Thermo Top Evo 5 Diesel
Webasto Thermo Top Evo 5 Diesel is designed for installation on vehicles with an engine capacity of 2.0 to 4.0 liters.
Advantages of the preheater Thermo Top Evo 5 Diesel:
The Webasto Thermo Top Evo 5 preheater installed in the car is characterized by rapid heating. Installed system heating saves motorists from most daily problems - in a preheated cabin, the driver comfortably starts the engine without difficulty. In addition, the car does not need to clean the windows from icing. Webasto provides not only prompt heating of the interior, but also relieves the glass of condensate that forms on their inner surface.
In addition to warm-up speed and efficiency, the Evo 5 has low flow fuel and a slight load on the car battery. Due to the fact that the heater does not load regular system heating the car, the battery is charged. This reduces fuel consumption and the concentration of harmful emissions.
In the event of a drop in on-board voltage in the car, the air blower maintains stable operation, therefore, the Webasto Thermo Top Evo 5 preheater retains its performance. The heater is switched off only when the voltage drops at the moment of start and during the set operating mode when threshold values. Thus, the security of the system and stable work Webasto Thermo Top Evo 5 guarantees trouble-free engine starting.
Installation:
The heater is installed according to the principle of most such devices - in engine compartment under the hood of the car. It "draws" fuel for its work from the tank of the car, which, as experience shows, is very convenient and typical for most Webasto devices.
Works paid separately
- Dismantling / installation of the fuel tank - from 2000 rubles.
- Dismantling / installation of the bumper - from 1500 rubles.
- Connecting the interior fan - from 1500 rubles.
- Connecting climate - control - from 3500 rubles.
- Production of protection (when mounted under the bottom) - from 1500 rubles.
- Dismantling / installation of non-standard equipment (siren, kengurin, crankcase protection, additional optics, etc. are paid separately based on the complexity of the work;
- Possible extras. work - 1000 rubles / standard hour.
ATTENTION! This service may be applicable to certain model range cars, so before installation of Webasto Thermo Top Evo 5 (diesel, 12V), contact the installation center convenient for you, and our master will answer all your questions.
To get the consultation
Thermo Top Evo, depending on the model, can run on petrol or diesel fuel and is designed to heat the car interior, help in defrosting windows, preheat car engine liquid cooling.
The inclusion and process of starting a liquid pre-start Webasto heater Thermo Top Evo.
Starting takes place via a switch-on signal from the control. The reheater starts when an input signal appears. The appearance of the input signal depends on pre-set switching conditions, such as outdoor temperature and operation of the car engine. When connected to Thermo Test PC diagnostics, other controls are disabled.
When the heater is started, the blower, circulation pump and glow plug start to function. Then the dosing pump is turned on. The Webasto Thermo Top Evo petrol heater starts with maximum load. Diesel Webasto Thermo Top Evo starts with a minimum load and slowly accelerating, goes to the maximum load.
During the start phase, the glow plug controls the formation of the flame. If the flame does not appear, or breaks off during the start-up process, this will lead to a restart. If the flame does not appear again, then start attempts are stopped. The heater is switched off by the appearance of an error and blowing of the supercharger.
The heater can only be put into operation after it has been switched off. Depending on the temperature of the liquid, the control unit selects the starting stage. The start-up stages are identical in terms of sequences, they differ only in the duration of individual phases (warm-up, fuel supply, etc.).
Heating mode of Webasto Thermo Top Evo liquid preheater.
After entering the mode maximum load the glow pin performs the controlling function of the flame sensor. After reaching a certain temperature (about 80 degrees), the heater switches to an energy-saving partial load mode.
If the temperature reaches the set switching point again, the heater switches back to control pause mode. If the temperature of the coolant decreases during part load due to increased heat extraction, the heater will switch back to full load.
The switching point temperatures are programmed in the control unit. If a flame break occurs during the normal combustion process, an automatic restart occurs.
Restarting the Webasto Thermo Top Evo liquid preheater after a shutdown with an error.
After the cause of the error has been eliminated, the heater is switched on again with a normal switch-on signal. This does not happen after overheating or a recurring error without intermediate normal modes burning.
Starting the Webasto Thermo Top Evo liquid preheater after a long period of non-operation.
A long non-operating state does not have any effect on the process of starting the heater. The only caveat to this may be the filling of the highway. In particular, petrol heaters are subject to partial evaporation of the fuel in the lines in the summer, so several full start attempts must be taken into account when starting for the first time.
Commissioning can also be carried out using the Thermo Test PC diagnostics. With its help, you can pump fuel through the highway. Fill the fuel line up to the heater using the "Bleed line" button.
Switching off and stopping the Webasto Thermo Top Evo liquid preheater.
The combustion process is stopped when a switch-off signal is received, when the limit combustion temperature is reached, when the set operating time is reached, or when an error occurs. This immediately stops the control of the metering pump and reduces the speed of rotation of the supercharger.
After a successful burnout to cool down, the blower fan speed is increased again. The purge time and fan speed of the blower depend on the type of heater and the state of operation in which the heater is turned off.
Switching off and on signals are processed according to the following rules:
1. The signal to turn off always comes from the control.
2. If there is no longer an initial switch-on signal or the set operating time has elapsed, this is interpreted as a switch-off signal.
3. A new start signal is ignored until the original start signal no longer exists.
4. Changing the heating time during operation is not possible. The heating must be switched off and restarted with the changed heating time.
5. If the heating was started as a reheater, the stop will be interpreted as a shutdown signal.
6. Restarting the heater is possible only after the combustion is completed and the first stage of cooling (forced blowing) has ended. The repeated switching signal is still stored in the intermediate memory and is not executed.
