Device Slamstop. It is a door closer attracting a loosely closed door. The closer is universal and is suitable for the absolute majority of foreign and domestic cars, to ordinary and sliding doors.

Slamstop ensures that the door will always be tightly closed. In addition to obvious comfort and prestige (it is not necessary to return to the door and close it, if it failed to do the first time) the closer significantly increases the level of security, which is especially relevant when transporting children: the door will be automatically tightly closed.

Closer Slamstop. It works almost silently and distinguished by the highest indicators of reliability: the product successfully stood the test with checking the working cycle of more than 30,000 times, which corresponds to 10 years of operation of the car.

SlamStop is the first device in the market providing such functionality. Prior to that, only cars of the premium segment in the manufacturers were equipped with the argument of doors. The device is mounted inside the door without disturbing the integrity of the appearance of the car. It consists of six constructive elements, each of which fully complies with the criteria for security, reliability, durability and practicality. SlamStop uses the transmission principle of electric drive to the closing mechanism through a solid cable.

The price is per set Slamstop., designed for two doors: driver and passenger. If you want to equip rear doors, you will need to purchase the second set.

Note!This equipment in Moscow and St. Petersburg is sold only with the installation. In other cities, retail sale without installation is possible.

Questions and Answer on SlamStop door closer

In this section, we help you choose alarm to your car. Technical consultations in this section are not provided. For advice on technical issues, contact technical support for the receipt of 8-800-700-17-18.

Frequently asked questions and useful articles:

• What will happen to a guarantee for my car?
• Why disassemble a regular key to connect the autorun?
• Will an invisible bypass by means of Pandora, Pandora Clone?
• How much money goes a month on GSM communication with alarm?
• What is the difference between various security systems Pandora?

Alexey Yuryevich

27 Novmarker 2016. Hello, closer for 2 or 4 doors?

Slamstop doors car closer can be installed in our Site Electronics Studio. Install the closer - and all the doors of your car will be closed smoothly, silently, and most importantly - they will do it yourself. It is enough just to lightly cover the door, without applying effort and, even more so, without making shocks - and Slamstop is tightly "waiting" it to the end. Thus, the possibility of breakdowns of all the mechanisms that are located inside the doors are significantly reduced. And most importantly, the comfort of the use of the machine is significantly increasing.

Yes, it's all good, but, probably, the closer can be installed only on the business class machine? Nothing like this. The system is made so that it suits almost for any car. Neither the brand, no year of manufacture of auto roles play. No matter what vehicle you own, use all the advantages of Slamstop. The closer is integrated both with "ordinary" swing and doors of the type "slider". That is, a minivan, a minibus closer is also installed without problems.

Principle of operation of SlamStop.

The onboard electric network of the car is used for the closer. The device characterized by universality and tolerance to the types of cars will delight and weigh other useful features.

Now before moving from the place, you do not need to worry about whether the doors should be closed. An elderly man or child may well "do not reach the door after landing. Such ride, of course, is fraught with unpleasant consequences. The Slamstop car door closer bought by you will provide reliability and safety of the trip for any passenger.

Tired of the fact that fellow travelers are constantly knocking the doors? Irritating strikes go back. The closer will take on the "qualified" door closing. Riding on our roads - in itself stressful occupation. So is it worth spending your nerves and on the work of the doors of your own car? We assign all the conversion of SlamStop's closer - he will great cope with his duties.

Today's article will help us figure out and find out what door closers are on a modern car? For what they need and the basic principle of their work.

The problem of a loose door closure is familiar to many motorists. And watch the picture when, after closing doors, it is necessary to open them again and it is often often necessary to close them with great strength. It is inconvenient if it suddenly detects a loose closure of doors.

Most often, this problem is manifested in passenger cars, as well as in bulky SUVs. You can get rid of this problem with the help of car closers, with the help of which the desired density of their closure is achieved.

After installing such a fixture on the car, you do not need to open more and close the doors for the tight adjustment. Therefore, the latest models of premium cars are almost everywhere equipped with these non-hard devices.

Principle of operation of the automotive closer

The device is very simple. The task of the closer tightly close the door after it closed on the first hook of the car lock. The operation of the mechanism is built on this principle to "reach" the unlocked door to the desired closing density. It helps to understand how the door to the door has managed to perform its function of the system of special sensors signaling the closing state.

After the door of the car snapped on the first hook, the sensor gives a signal to the electrical argument and it includes a special cable, reaching the door to the optimal dense closing state.

It is important to understand that the closer is not an additional castle, and it cannot independently close and hold the door in the closed state. Its functionality is reduced exclusively to its dense closure. Therefore, if a regular lock is damaged or has any defects, the door closer will not fully fulfill the functions assigned to it.

It should be understood that the closers should not allow the excessive closure of the doors, because of which even the deformation of the structure is possible.

All of its functions can be characterized by the following positions:

- the closer provides the optimal dense adjoining door to the car body;

- the level of comfort increases in the process of entry and exit from the car;

- improved thermal insulation, noise absorption, as well as hydraulic abrasion of the car.

Therefore, to fully fulfill all the functions listed, the automotive door closer is a very complex high-tech device.

Conditionally such devices are divided into two main groups, namely:

- specialized staffing devices (for cars clearly indicated marks);

- Universal devices (can be applied to almost all types of modern cars).

As a rule, regular devices car completed at the assembly stage. They compared with universal devices, have some technological advantages.

In addition to all this car door closers differ also at the place of installation (front, rear, or the rear door of the SUV or Hatchback). All this affects the method of their installation and further adjustment, if such a need arises.

An important point that should always be remembered is the need to exhibit the optimal parameters of the argument. Given the intensity of the operation of the door mechanisms, the autodifers periodically have to regulate.

How are door closers for a car

Installation and fastening of door closer in the car is made directly into its inner part.

The door closer consists of the following items:

- electronic drive;

- door position sensor;

- electronic control unit;

- drive cable;

- Clamp (roller).

All this is installed directly inside the door mechanism. And if the electronic devices or devices or devices have already been mounted there, you need to closely monitor the connections of contacts so as not to disrupt their performance. The device has optimal overall dimensions and is adapted to the reinforcement in the inside of the doorway.

In the process of installing and installing individual elements of such a system, it should be closely monitored that the structural elements interact with each other do not intersect, and also did not rub about other parts or nodes in the doors.

What is a car closure door, as installed, and why put it.

The content of the article:

I think, every motorist faced the situation when the door of his iron horse was loosely closed, then it was necessary to open and close with a stronger effort. It is very uncomfortable when, after installation on the alarm, you notice this, you have to remove the alarm again, close the doors and return to the alarm.

What is a car closure door

Often it occurs in passenger cars when closing the rear doors or in bulky SUVs. In order to get rid of such an unpleasant thing, we developed car closers for doors, for dense door closure.

Thanks to the installation of such a device, you do not have to open and close the doors of the car. Such closers have long been installed on premium class cars and have deserved authority from many car enthusiasts. But still, the closers are not installed on all cars from the point of view of their value and physical ability.

Mention of the premium class machine, then such a system can often be found in BMW, Mercedes-Benz, Audi and others.

But, even deciding to establish such a device, not every car will have a physical opportunity, since the doors of all models are different. Therefore, there is universal door closers. One of these firms providing universal closers is Slamstop.

Principle of door closer doors

The principle of the closer is very simple, it does not bring a closed door to a closed state. The closer is triggered after the car's door closed on the first latch of an ordinary car regular castle. Thanks to the door position sensor, the system recognizes, the lock is completely closed or not.

As soon as the car door snapped into the first latch of the standard lock, the closer sensor is triggered and its electric drive, after which the mechanism takes over the automotive door to the desired state.

It is worth noting that the closer is not an additional lock, as it cannot fix the door or keep it in a constant closed position, it only reaches not a closed door. It should be remembered that the standard mechanism must be fully fulfilled and there should be no damage or malfunction in closing. Otherwise, the system simply will not work correctly.

How do door closers are installed

First of all, we consider where the whole mechanism consists. The first thing that rushes into the eyes is an electronic drive that helps in reaching the door. Further, the actuator that is mounted on the door. Electronic control unit, door position sensor, actuator cable and roller retainer.

Installing the entire system begins with the removal of the door skin. If there is an electric camera or power windows in the car, then it is worth not carefully recorded or remember the location of the contacts so that then it did not have to take again. In the worst case, you can overpass the control system.

After removing the trim, we set the electronic drive to free space, so that the reaching link is directed toward the door lock. This will reduce the power of resistance when the closer is triggered. It is necessary to screw the electronic drive that it is so that it will take over the power when adjusting the automotive door. The cable that will transmit strength is made from the working mechanism of the standard lock and to the electronic drive, so that it does not interfere with other mechanisms and preferably not crossed with them.

A sensor is put on the door above the castle, which, when combined with a magnet (it is also placed on the car's rack opposite the sensor), it works and gives a signal to start the entire closer mechanism. It is worth remembering that the magnet and the sensor should be set exactly one opposite one. To do this, you will need to drill two holes in the body and doors of the car.

All electronics and sensor are connected to the control unit, which controls the work of the closer and transmits all signals to the mechanisms. The control unit is connected from the total power supply system to 12V. The door to closing the door completely occurs from 1 to 2.5 seconds. The control unit is also worth thoroughly fasten on the door housing, since at the most inopportune moment it will hang and create an unpleasant sound. After that, you will have to remove the trim again.

After installing all the mechanisms, you should check their performance, slightly closing the door, and in front of your eyes it will automatically be completely closed itself. Next, you set the door trim back. Thus, it is worth coming around each door to which the closer will be installed.

Configuration manufacturers

In addition to full-time closers, which are installed in dealerships and not for small money, there are also universal closers of famous manufacturers, a plus of such closers is a small cost and the ability to independently install.

The most famous company SlamStop, the cost of a single door kit is from $ 150, without taking into account the cost of the installation.

With less well-known companies, Dorma, Ryobi, Abloy are considered, the cost of one set of such a company is from $ 110, but they are all based on the basis of SlamStop, but according to users much worse than the original car closer doors.

Price on door closers

The versatility is that it is possible to install almost any brand and model, the cost of installation with equipment is from 13,500 rubles per door, depends on the quality and firm manufacturer. In comparison with the Dealer centers of BMW, Audi, Mercedes-Benz, the installation of such a supplement can do for each door from 35,000 rubles to 100,000 rubles.

Video on the installation of car closer doors do it:

Now many developers in the field of automotive accessories are aimed at increasing the comfort of car operation.

One of these accessories that is increasingly becoming popular is the device for automatic lifting of the door glass when the car is set to the alarm, it is the same module of one-sided closing of glass doors.

In the people, such devices received the name of the closers of glasses.

The usefulness of the use of the closers is obvious, the owner of the car before performing the latter signaling does not need to be checked, whether the windows are closed, since these devices will be closed automatically.

Initially, the closers of glasses were completed only premium cars, and only in the top-end configuration.

Over time, many drivers appreciated the favor of this device, which led to the emergence of universal closers, which can be installed almost any car.

In addition, some car owners familiar with radio electronics began to collect homemade devices that are performed very well.

Pillar Closer - What is the way it works

The car glasses closer is an electronic unit that connects to or a central lock, as well as the glass control system.

The automotive accessories market does not suffer from the deficiency of glass closing modules. In the main one, they are produced by firms engaged in the production of security systems for cars.

The most popular manufacturers of closers are Sheriff, Pandora B Tiger, although quite and other manufacturers.

Select car closers are not so difficult. First you need to decide for the closure of which amount of glasses should be given this module.

All this needs to be done because devices producing the closure of two glasses, as well as four.

So when choosing should consider whether there are glass control systems on the rear doors.

By this criterion, they are divided into:

1. Simple single-functional;
2. Multifunctional.

Simple devices are capable only to close the glass when making a car. But the multifunctional is able to memorize the position of the windows before closing and after removing the car from the alarm to return them to the same position.

Also, they can return the glass to its original position, if when it closes it burst into an obstacle.

Some modules may have another features that can be turned on and disable, in general, customize the work of the closer at its discretion.

But the cost of multifunctional modules is much larger than simple, despite the fact that many of its capabilities may not be in demand, but it will be quite difficult to connect it.

Installing a simple closer

The more functions and the number of doors with which the module will work, the more difficult it will be included in the car power circuit.

Such a closer without problems can be installed itself.

From the tools you will need a bit:

• Screwdriver;
• Knife and nippers;
• Insulating tape.

First you need to decide on the installation site of the device.

If the car has only one system control system installed on the driver's door, but is responsible for the opening of the glass on the passenger door, then it will be better to install the module inside this door.

If separate and arranged systems are located on two doors or control keys are located on the center console or tunnel, then the optimal will be installed under the dashboard.

Installing and connecting.

After selecting the installation site, you can start and connecting.

The module must be powered by the on-board network of the car, so the "positive" wire must be supplied to it, as well as "mass".

Then you need to identify the wires that transmit voltage from the control keys to the electric motors.

According to the scheme attached with the closer, the wires of the wires from the module in the power wiring are made.

For each door, their outputs are provided in the module and they differ in coloring wires.

It turns out that the wire that comes from the key to the electric motor, the module wires are connected to each of the ends of the wire.

Thus, the module is connected to the glass control system.

It is important to choose the wires properly, because there are two from the keys to the electric motor - when the voltage is submitted to one of them, the glass is produced, and when submitting to the second - lowering.

If the module is mistakenly connected to the lowering wire, then when setting the car to protect, the glass will automatically open.

Next, you need to connect a wire to the closer that will transmit the pulse from the security system module. And the impulse is needed, which will be transmitted to the module within a few seconds after the car setting on guard.

Different systems use positive or negative impulses. Therefore, before connecting, you should find out which impulse sends the system installed on the auto.

Closers are universal, so they have access to positive and negative impulses, the main thing is not to confuse.

After connecting the entire wiring, before removing all the wires, it is better to check the working capacity of the closer.

If everything works fine, it will only remain qualitatively forcing all the cuts of the wires, and then remove them from sight.

Connecting the closer for 4 doors is made according to the same principle, only the patch in the standard wiring will be greater.

Homemade closer

As for homemade front door closers, the car enthusiasts have already created a large number of diverse models that work well. And there are simple homemade devices, and some manage to create multifunctional sensors.

The simple closer to make easy, having small knowledge over electronics, and also requires elements to create a module.

And you will need several capacitors, electromagnetic relays, timer and several transistors and resistors.

The principle of operation of the self-made module is: the signal on the module is taken from the block of the security system.

This signal enters the relay that closes its contacts, connecting through the power supply resistor with the capacitor to charge it.

After stopping the signal, the capacitor connects to another relay, which begins to feed the timer.

The low voltage output from the timer will open the transistor, then the voltage will go to one relay, after which the voltage through the resistor will go to the electric motor - the glass will start closing.

After the complete closure of the seclax, due to the stop in the door, the network will increase the load current, which will entail the voltage drop.

Due to the voltage drop, the transistor closes, thereby de-energized the relay, and the closer turns off.

This scheme is considered very simple, but it works without problems and its tasks performs well.

Outcome

As a result, it can be said that the factory bridge closers of the car can install almost every driver at least a bit versed in the electrician, especially since the instruction is attached.

But not everyone can be soldered and installing the self-made device, and the reliability of such a device is under great doubt.

Although there are no bad models that work for years. But here you already need to focus on the reviews of people who enjoy such devices and the qualification of the master who did them.