An important stage of protecting your body from aging is polished. It will allow to hide pores and microcracks in which small dust accumulates, and protect the paintwork from the aggressive effects of external factors. In addition, polishing will help your car literally to doll!

There are two types of polishing:

Abrasive polishing - is carried out in the presence of visible scratches on the body cover.

Protective polishing - helps for a while preventing external coating factors. The most important thing in this business is not to overdo the polyrolla in order not to apply more harm than the benefit. And how to do it, we will tell below.

What will help save the brilliance of the body:

Open list Close list

To protect the decorative elements of the body, before polishing, all plastic and rubber parts, as well as the gap on the body of the car should be saved before polishing. Since after complete drying, the polyrolol on these sites can manifest itself in the form of matte raids, which will not be so easy to remove. To facilitate cleaning from the polyroli, the cream and edges of the glasses.

Speakingly divide the car on the main areas - the roof, the door, the hood, and share each of these parts yet for several plots - so the surface will be much easier. It is not necessary to try to process the entire body at a time, since the polishing agents will have time to dry and remove them will be difficult.

Apply a little polyarol on a sponge or textile napkin (do not apply a lot of polyrol on the sponge, otherwise it will be problematic to clean the surface) and run it on the car in the selected area, while the polyrolol is barely noticeable, and the sponge will not start moving along the surface.

Try to polish so that the subsequent row is minimally sailed to the previous one, ideally, they must pass in parallel.

Water the surface in the longitudinal and transverse directions. Do not make circular movements - it can lead to uneven polishing!

Next, using a special microfiber mitchka for polishing, carefully remove all the remnants of the body from the body to complete disappearance. It is important to work precisely a dry vespeck (napkin or cloth). Do not leave the remedy on the surface for a long time - it will be difficult to get rid of it.

View the processed area to light. If the scratches are not left - go to the next part, if the roughness is visible - repeat the polishing.

Remember that if you overdo it, you can damage the body covering. Therefore, use an abrasive polyrolol without fanatics.

Thus, the complete restoring polishing of the entire body will take from three hours depending on the state and dimensions of your car

Just one can of the polyrolol grabs 2-3 applications.

If you have a drill:

Use it to speed up the process. To do this, apply special nozzles that are sold in construction or auto stores.

The principle of operation is the same as when polishing manually.

Nuance: Polishing disk Always press to the treated surface evenly and with the same effort, since if the disk is at an angle, it can provoke the formation of stains and scuffs, visible transitions from one site to another.

Using drills will significantly save your time.

Completed the most difficult and long phase of car body polishing. The result of working with abrasive polyrolla: removed roughness and scratches from the coating. As a bonus: This tool will remove the arrogant guestron, someone else's paint, markers and other pollution.

If your car has deep chips, you can remove them with tools pencil "TouchupPaint».

This tool hides more explicit defects that damaged paint. But, naturally, if scratching deep into the floor of the nail, then this means you, alas, will not help.

How to use the tool

We make a protective polishing of the body using the COSMIC

After recovery polishing the body will look like a new one. However, if the car is constantly operated, it will last completely for a long time (a few weeks). In order for the recovery polishing to make sense, and the result from it is preserved for a long time, immediately after it it is necessary to carry out a protective polishing. Then the effect will continue about 6 months.

Use the COSMIC tool for protective polishing. This is a polyrolol, which not only cleans and attaches shine, but also protects the body of your car from rain, sunlight and exhaust gases. At the same time it is very simple to use. All thanks to the unique composition, namely the natural wax of carnab and mineral additives. They form a dense protective shell on the surface of the body, which covers the body of a car with a film that protects your car from different environmental influences - from ultraviolet, without giving burning paint to the means of road services, without allowing you to eat paint.

Be proceed to protective body polishing:

Applying this polyrol should be very fast.

Apply the polyrolol completely for the entire body with the help of a sponge.

Uniformly and vigorously dispense the polyrolol on the surface with a thin and homogeneous layer, not allowing open places.

Wait until the agent dry (10-15 minutes) and forms a single protective coating.

Clean the car body with a dry mitigation of the microfiber, deleting the remnants of the means.

ATTENTION: Do not leave a polyrolol on the surface for a long time to avoid the appearance of stains!

Apply very carefully when polishing the joints of parts and places of plastic and metal contacts, since after drying, the polyrolol will be quite difficult to remove from slots and plastic.

The entire process of applying a protective polyerol on average takes 30-40 minutes.

One bank of this means is enough for a large amount of polishes.

Give the body a glitter with liquid waxHiglo Wax

At the final stage, use liquid wax from Kangaroo - "Express" polyrolol in the form of a spray, which will give your car an extra glitter after protective polishing. It can be compared with wax, which is applied to the body in car services. The effect lasts until the first washing, but also applies very quickly.

Polyrol can be applied both on wet and dry body:

Shake the bottle with the polyroller and spray the tool on the body surface.

And scroll through it with a microfiber rag to a glitter with circular motions.

On the processing of the entire car takes only 20 minutes.

Polishing is over!

We removed scratches, small roughness, chips, gave the shine and retained the effect. Now your car must wave like a mirror!

The easiest test of its work can be an ordinary bucket with water.

Follow the polished part of the body, you should see that the water is going to large droplets and freely rolls off the car.

If you decide to make polishing yourself, choose a day off, as polished takes a lot of time, but it is worth it!

Watch the video clip "How to make a car body polish with your own hands"

Sparkling the car!

Over time, the old paintwork loses his shine, and for ledge the body of a new, updated type is necessary polishing. Consider in more detail how cars are polished do it yourself.

There is such an opinion that a car polishing costs for money procedure and no need to work. However, the car polishing is to improve the appearance of the body, and the removal of scratches, cracks, as well as the protection of the car body.

In the body defects, dirt, sand, which under the influence of moisture cause corrosion is clogged.

Types of car body polishing

2 polishing class:

1. Protective polishing.
2. Abrasive polishing.

Protective polishing auto do it yourself

Polishing paste is applied to the surface of the car, in order to further protect against the environment.

Protective polishing pastes are purchased in the store based on wax, Teflona.

Before polishing:

1. The car must be clean, dry. From the surface, remove traces of pollution.
2. Do not work light sunny rays. Better for this garage is suitable, but the lighting is necessary, so that when polishing does not miss scratches.

Do not polish if the body is recently painted. Paint polymerization takes time, and polishing only violate the process.

Rules for applying a protective polyter on the body:

1. Polyrol is applied to the surface of the car body manually, and with a vet, or using a polishing machine. Pre-applying polyrolol.
2. Do not apply a polyrolol under direct sunlight - quickly dries on the heated metal.

Apply a polishing paste on the surface of the body part and start polishing. Rubbing with circular movements using a rag. The presence of a polishing machine, of course, will speed up the process.

Protective polishing has its own characteristics. Polishing pasta not durable, washed off over time during car wash.

Abrasive polishing auto do it yourself

Abrasive polishing is necessary for view updates The body of the car, if it comes to the old paintwork, or to eliminate scratches, car painting errors.

The latter happens when after painting the car on the surface of the body there is "garbage", shagren - it is polished and polished.

The technology is divided into steps:

1. Grinding finely irrevocated skurt.
2. Polishing with polishing paste.

Polishing body car

Before polishing a freshly stained car or an old paint coating, first remove either "garbage" or an old oxided layer.

For this applies abrasive skin with graininess P2000but you can and more finish P2500.

Abrasive skin before use can be pre-dunk, it is done to extend the use of skins and for legend additional elasticity.

Grinding is underway until the matte surface is obtained and the lack of visible scratches and damage to the surface. Polished in two directions.

First one way, then to another. After the site is polished, starting to polish.

Polishing the body with a polishing machine and a special polishing abrasive paste.

Types of abrasive paste:

1. For soft materials - G3
2. For solid materials - G4
3. For old paint coatings - G6

After polishing, polishing paste is taken and applied to the desired area. Crops into a manual napkin or a polishing machine.

Then the machine, on small revolutions, the surface is polished, after which the turns are increasing. It is done to "not scatter" a paste on the body.

Make sure that the surface does not overheat. In case of rubbing in one place, the surface is heated to a high temperature, and the paint coating is damaged.

Important do not delay On one site and do not press the circle too much. Will damage the body coating. Because of what will have to divert the body.

Polishing auto with your own hands continues to legend brilliance Body.

The protective polishing of the car body is only a temporary solution, plays a protective role, does not remove the paint layer, but the abrasive polishing will last, depending on the operating conditions, up to 3 yearsHowever, reduces the paint layer. Therefore, such a polishing make maximum 3-5 times.

Obviously, a clean and polished auto looks much better eager. And there are two ways to solve the problem of car care of cargo: to impose care of it for service workers or toweling centers for which car polishing is a routine work, or, concerning patience and time, make this work itself. The first way simpler and roads, but, choosing the second, should be understood in the intricacies of the upcoming process and have a small amount of theory on how to polish the car.

On the tasks of the polyrolol and polishing purposes

The main tasks of the polyteroli, regardless of the varieties of this fund, are to protect for a certain term of the body of the machine from the negative impact of the external environment and creating a mirror surface. If a car owner has to be polished need to decide on the purpose of which he pursues. From this will depend on its follow-up actions.

Task: Return the body of the former shine

Before polishing, it is necessary to wash the car, otherwise the entry called "polishing the car with your own hands" will not make sense. The washing is carried out in a shaded place and with a fully cooled engine. Before starting further work, you need to give the surface well to dry.

For manual polishing, the napkins made of microfiber are best. They can carefully give the body a mirror glitter. From the polyroline you need to choose those that are created to care for the car, good, today their choice is more than great. They are on silicone basis, with the addition of natural wax, etc. Restore cleaners have proven well. It should be squeezed on a small amount of polyroli on the surface of the body, and an hour later a car will glisten. You just need to not forget to change the rag.

Task: Remove Swam and Defects

Here is the time to get a polisher and paste, as the solution is not necessary without their use. Pastes of this type are used for deep cleaning surfaces, since they are capable of removing the top layer of varnish. However, an excessive "passion" abrasive can lead to a sad result.

It should be given due to the abrasive pastes of the new generation, the cutting power of which is large enough. They are resistant to drying, exclude the risk of scratches when working, adapted to all types of varnish and paint.

Delete small, barely noticeable scratches are recommended using reducing cleaners. This is a kind of synthetic polishing paste.

Nozzles-Circles for polishing units are:

White (such circles are characterized with rigidity and are intended for coarse works);

Orange (medium softness circles, universal);

Removal of serious defects should be started with grinding short movements. Before the subsequent polishing, the polished material must be ridiculed with water.

Polishing the car with your own hands begins with the most damaged places. The paste is applied directly to the polishing circle. To avoid the risk of burning and wiping the surface of the LCP to the lower layers, you need to be attentive when working on curved areas with abrasive pastes. In addition, the polished surface should not be very hot. Holograms arising after polishing LCP are easily eliminated by antgologram pastes. In addition, the new generation of products of this type will remove unsightly traces and divorces of other polyrolles, as well as return the surface of the machine the primordial shine.

Completed by repeated degreaser.

If your car has lost its beauty and glitter over time, then you need to urgently put in order the body. Of course, if there is, the process will be rapid, but there are options when you need to polish the car without a polishing machine. A few years ago, people could not dream of high-quality polishing without the use of expensive equipment. But already in the modern world there are many devices with which you can produce polishing without much effort and without polishing machine.

It should be paid to the fact that if not immediately, it may soon lead to a rusting of the body. Most often rust Arches and thresholds of the car precisely because stones from the wheels are embedded and the surface scratchs, thereby bargaining metal.

Preparation

Of course, before starting any process, it is necessary to prepare thoroughly, it is no exception and manual polishing of the body.

• First of all, it is required to choose and buy special means before polishing the machine manually. It is necessary to approach the choice with special care, because the quality of the polishing of the car is depends on the choice of the right means. To date, on the shelves of any store for cars, you can find a huge selection of various means so that you can be with your own hands without polishing machine. Each means is unique in its own way, so they all differ in their effectiveness, quality and, of course, price. It happens that one manufacturer makes funds with different efficiency. That is why you need to carefully study all the inscriptions on the package if the store without the seller, or to clarify the department of the department, which is obliged to understand products.
• The second important condition in which the car can polish itself is the place of work. It should be a warm, dry, bright and well-ventilated room. It must necessarily comply with all three parameters, because if at least one item is missing, then it can be reduced to all work. The fact is that only in a warm place can be diluted to the right state and freely apply on. A light place should be due to the fact that only with good lighting all the body defects will be visible, and only so they can be eliminated. It is advisable to inspect the car in sunny weather on the street, marker marker defects. In addition to all this, an abundant air hit is required, because many means in this process have harmful substances that are allocated when used, and dust. All this can negatively affect the human state.

• The third condition is considered a clean car body. In this case, it is required to rinse the machine to such a state so that all body defects are visible. This is a prerequisite, because it is possible to detect all scratches, cracks or chips. Wash the car is preferably using various shampoos and detergents that are in every store for the car. You can wash the car with your own hands, which will increase the chances of finding all the defects. After that you need to dry the car with a dry cloth. This will also increase the chances of finding all defects on the body. Then it is necessary to isolate all those elements that will not be exposed to polish. Most often these are plastic elements of the body of the machine or even metal, if a local car polishing is done with their own hands.
• The last condition that must be provided during the preparation of the body of the car before polishing is that in one garage with the car there should be no other car, which will be processed during polishing. The fact is that particles of dust, dirt and sand, which can be on another car, can calmly get on the body of a polished machine and cause serious damage. In this case, it is often necessary to repaint the entire car if a complete color of the car body was performed.

Polishing

This is the most responsible stage in the whole process. The fact is that everything needs to be done with a certain tempo, but qualitatively.

Many know that the polyrolol dries out 3-5 minutes after application, so all processing you need to have time to dry it up, and otherwise you have to redo it again, but only the next day, because you can seriously damage the car's painting.

As already understandable, polishing is a multi-step process, so several main stages should be allocated.

1. At the first stage you need to prepare all the necessary tools and means before starting the operation. This is considered the first stage, because all this needs to be chosen and buy in the store.
2. The second stage is the complete flushing and drying of the car.
3. The third stage is the application of polyterols by the car with their own hands.
4. And the last stage lies in the drying of the car body.

Special attention has to be reversed on the application of the polyroli. In fact, there is nothing difficult, the main thing to comply with certain rules.

• First of all, it is impossible to add too much tools at one time. The fact is that it will dry very quickly (3-5 minutes), if during this time it is not enough to be confused, then it dries up and you have to redo it.
• After complete rubbing, the emulsion must be wiped the body with a wet cloth.

Summary

Many drivers think that without a special machine will be problematic, so they try to avoid this procedure. But it is absolutely impossible to ignore it, because it can cause it to start rusting the car body. In fact, the car polishing process without the use of a polishing machine is not very difficult and has a number of its advantages, because everything will be done with their own hands, a certain experience will be obtained in working with the car with your own hands.

(Function (W, D, N, S, T) (w [n] \u003d w [n] ||; w [n] .push (function () (ya.context.advmanager.render ((Blockid: "Ra -227463-10 ", Renderto:" yandex_rtb_r-a-227463-10 ", async: true));)); t \u003d d.getelementsbytagname (" script "); s \u003d d.createElement (" script "); s .type \u003d "text / javascript"; s.src \u003d "//an.yandex.ru/system/context.js"; s.async \u003d true; t.parentnode.insertBefore (s, t);)) (this , this.document, "yandexcontextasynccallbacks");

Any motorist will not mind that his transport looks like a new one in a year, and five years old. However, not all this turns out - the fault here can be atmospheric and mechanical factors that adversely affect the state of the paint bed. In microcracks, dust particles are assembled, due to which the car is deprived of the former mirror glitter. Modern car services can restore and protect the LCP, but is there any point in spending money on things that any car enthusiast can do.

Why do you need polishing with your own car body hands from small scratches and when to do it?

Over the past two dozen years, there are no new technologies in the field of painting and varnishing of the body, which cannot be said in terms of protective and restorative mixtures. A significant breakthrough is noticeable here, and we can regularly observe the emergence of high-quality and durable polishing agents. This allows you to successfully deal with microcenarpins, which in the absence of proper care can soon become corrosion foci.

Before polishing the car itself, it is important to take into account the importance and necessity of this procedure:

• Restoration of the upper layer of the paint plane, which prevents the appearance of corrosion foci.
• Periodic protective procedure with the help of special pastes will extend the life of the LCP.
• Quality Right chances when selling cars in the secondary market.
• A protective layer is created on the body surface, which protects it from the effects of precipitation and chemicals.

Micro-sacrapines that do not reach the primer layer are easily removed without the services of professionals. A simple abrasive treatment will remove the enamel layer with a thickness of about 5 microns, which is enough to achieve a mirror glitter. If we consider that at the factory, the LCP thickness ranges from 100 to 250 μm, then 15-20 grinding cycles will take off without any problems. To polish the car body from scratching with their own hands without any problems, you need to know information about the lacquer applied layer or measure its fulgebel thickness.

Necessary equipment and materials

Almost all of the type of equipment and consumables listed below are used when Automatic:

• Polishing unit with a rotation frequency of 1000-2500 rpm. It is possible to use an electric drill with a revolution control device.
• Grinding discs and polishing circles for different stages of processing.
• Adapter or substrate for fixing polishing circles.
• Polishing pastes.
• Flannel napkin.

Polishing materials

Many motorists do not quite understand what to polish the car body at home. According to the degree of abrasiveness, the products for the restoration of the LCP are divided into several types:

• LargeBrasive - hide the frontiers left after unsuccessful Body plot. The composition perfectly copes with shaggy, enamel divorces and varnish cracks.
• Finely abrasive - The mixtures give the polished surfaces elegant shine.
• Abrasive - Polyrols that protect LCP. Foods based on wax and silicone are easy to work, but have a short service life. Polishing pastes are greater popularity.

Tools for processing as of state are divided into pasty, liquid and aerosol. Thick mixtures are effective, but their price is higher than the rest. Liquid pastes carefully relate to LCP, but it is difficult to work with them on vertical planes. Aerosol compositions are less productive, however, it is convenient to carry out preventive processing.

Polishing Circles

Circles differ by type, form and materials. Before polishing the car body itself, it is important to choose the appropriate tool. To eliminate microcenarpin, foam rubber circles are usually used, but they also have different density, which is determined by color:

• White - has the toughest structure and is used in a pair with large-brosal pasta.
• Orange - the circle of average stiffness for working with finely abrasive compositions is usually applied after processing with a white circle.
• Black - used with finely abrasive or protective pastes.

These are the main colors applied as and which can most often meet in auto shops. There are still, of course, yellow, blue and green, but within the boundaries of one article, it is impossible to consider all varieties. To polish manually or with the help of a machine, you may need sandpaper. The most commonly applied the following types: P1000, P1500, P2000 and P2500.

Technology: How to correctly polish the car in the garage?

First of all, it should be noted that the work on the correction of paintwork should not be carried out in places where drafts and dust are present. The fact is that the polyroli will not be sense if particles of small garbage fall into the applied composition. The body of the machine should not be heated, the optimal temperature in the garage is 15-20 ° C.

Preliminary preparation

In order for the result of polishing with their own hands of the LCP car body from scratches did not disappoint you, you need to carefully prepare a car. To do this, it is enough to perform several uncomplicated tasks:

• Wash well and dry the car.
• Remove spots from bitumen and midges, for what to use special needs or ordinary White Spirit.
• The garage room ideally should be equipped with an exhaust, because the process is formed by a mass of fine dust.

(Function (W, D, N, S, T) (w [n] \u003d w [n] ||; w [n] .push (function () (ya.context.advmanager.render ((Blockid: "RA -227463-2 ", Renderto:" yandex_rtb_r-a-227463-2 ", async: true));)); t \u003d d.getelementsBytagname (" script "); s \u003d d.createElement (" script "); s .type \u003d "text / javascript"; s.src \u003d "//an.yandex.ru/system/context.js"; s.async \u003d true; t.parentnode.insertBefore (s, t);)) (this , this.document, "yandexcontextasynccallbacks");

• Elements of the body of rubber and plastic need to be closed with a scotch.
• Organize high-quality lighting, ideally this walls and ceiling. In this case, uniform lighting of the car body is ensured. Portable lamps on tripods will not interfere.
• If necessary, the processing of large areas at the same time should be visually divided by the machine to the sections. It is not necessary to polish without a machine for one approach all the required plane, since most of the polishes will have time to dry, and it will be difficult to remove them.

Procedure for performing work

Abrasive polishing is done both using power tools and manually. With a manual method, the paste is applied to the napkin and further distributed over the body surface. Aerosol mixtures are sprayed directly on the car. If there is a grinding machine, the procedure has the following:

• Install a circle of white color and apply a large-brosal or medium-abrasive composition on it (depending on the complexity of defects), part of the paste is placed directly to the processing site.
• Set the mode 2000 rpm polishing the plane in longitudinal and transverse directions. Circular movement of the circle is undesirable, as they lead to uneven polishing.

(Function (W, D, N, S, T) (w [n] \u003d w [n] ||; w [n] .push (function () (ya.context.advmanager.render ((Blockid: "RA -227463-4 ", Renderto:" yandex_rtb_r-a-227463-4 ", async: true));)); t \u003d d.getelementsBytagname (" script "); s \u003d d.createElement (" script "); s .type \u003d "text / javascript"; s.src \u003d "//an.yandex.ru/system/context.js"; s.async \u003d true; t.parentnode.insertBefore (s, t);)) (this , this.document, "yandexcontextasynccallbacks");

• Before you finally polish the car, the microfiber mitchka thoroughly remove all the remnants of pasta from the body. Visually to control the absence of scratches and, if necessary, repeat the stage, if everything is fine - go to the next cycle.
• Install the machine with a soft circle and process the same portion of finely abrasive paste.
• After processing the second layer, the car needs to be washed and thoroughly dry.
• To put the turnover of 1000 rpm on the polishing machine and apply a disapprosive mixture on the circle. The trajectory of movements must be parallel to layers not too hit each other.
• Apply a soft cloth protective polyrolol.

In the case where the damage to the LCP is insignificant, microcenarpins still reduce the shine of varnish. Therefore, it makes sense to slightly polish the body, for which the covering cleaner will need, finely abrasive one-step polyrolol and universal polishing circle. You can use a white corrugated circle and a protective mixture.

Final Accord

Protecting the aircraft from the negative environmental impact will help mixtures that basically have wax, silicone and other components. Most recently, manufacturers have developed protective polyroli based on polymeric substances. Finish pastes are designed for different service life.

Wax or silicone-based means are able to withstand two or three noiseing operations, but they are cheap. Polymer mixtures are more expensive, but also serve at least six months. Regardless of the type of paste, the final finish is made by a soft circle or in general manually. Upon completion of the work, use the car with water abundantly, after high-quality polishing, the liquid is grouped into large drops and seeks to escape from the body.

(Function (W, D, N, S, T) (w [n] \u003d w [n] ||; w [n] .push (function () (ya.context.advmanager.render ((Blockid: "Ra -227463-7 ", RENDERTO:" yandex_rtb_r-a-227463-7 ", async: true));)); t \u003d d.getelementsbytagname (" script "); s \u003d d.createElement (" script "); s .type \u003d "text / javascript"; s.src \u003d "//an.yandex.ru/system/context.js"; s.async \u003d true; t.parentnode.insertBefore (s, t);)) (this , this.document, "yandexcontextasynccallbacks");

(Function (W, D, N, S, T) (w [n] \u003d w [n] ||; w [n] .push (function () (ya.context.advmanager.render ((Blockid: "Ra -227463-11 ", Renderto:" yandex_rtb_r-a-227463-11 ", async: true));)); t \u003d d.getelementsbytagname (" script "); s \u003d d.createElement (" script "); s .type \u003d "text / javascript"; s.src \u003d "//an.yandex.ru/system/context.js"; s.async \u003d true; t.parentnode.insertBefore (s, t);)) (this , this.document, "yandexcontextasynccallbacks");