The performance of the car depends on how you look after it. If the necessary measures are taken on time, then problems are unlikely to arise with it. Automobile Ford Mondeo was no exception. special liquid provides stable and reliable performance many of its components: engine, gearbox, brake system and many others. It is recommended to monitor its level and replace it in a timely manner.

Before performing this procedure necessary:

Choose a liquid that fit better total for a specific unit;
Determine the frequency of the procedure;
Find out how much liquid is needed.

This information can be found in the user manual. But, as practice shows, it may not be complete. As a result, mistakes will be made that will affect the operation of the Ford Mondeo car. In addition, it is not necessary to use products and volumes specified by the manufacturer. This also applies to periodicity. official regulations offers to change the oil in the engine after 20 thousand km. But in practice, his condition worsens after 10 thousand, the liquid loses its properties.

This is especially true for machines that are operated on bad roads and under adverse climatic conditions. As a result, the oil loses its properties and becomes unusable. To extend the life of the engine and other parts will allow its replacement. How much liquid and where needed, we will analyze further.

Refueling tanks for fuel and lubricants Ford Mondeo

Filling/lubricating point		Filling volume, l (gallons)	Name of oil/fluid
Fuel tank		70 (15,4)	Unleaded gasoline with an octane rating not lower than 95
Engine lubrication system (including oil filter): 1,6 lDuratec-16V Ti-VCT 1.6L EcoBoost SCTi (Sigma) 2.0L Duratec-HE 2.0L EcoBoost SCTi 2.3L Duratec-HE 1,6 lDuratorq-TDCi 2.0L Duratorq-TDCi 2.2L Duratorq-TDCi 2.5L Duratec		4,1 (0,9) 4,1 (0,9) 4,3 (1,0) 5,4 (1,2) 4,3 (1,0) 3,8 (0,8) 5,5 (1,2) 5,5 (1,2)	All-weather motor Ford oils or Motorcraft Formula E class SAE viscosity 5W-30, SAE 5W-40,SAE 10W-40, meet Ford specifications WSS-M2C913-B, or at least ACEA A1 / B1 or ACEA AZ / B3
Engine cooling system: 1,6 lDuratec-16V Ti-VCT 1.6L EcoBoost SCTi (Sigma) 2.0L Duratec-HE 2.0L EcoBoost SCTi 2.3L Duratec-HE 1,6 lDuratorq-TDCi 2.0L Duratorq-TDCi 2.2L Duratorq-TDCi 2.5L Duratec		6,5 (1,4) 6,2 (1,4) ≈ 6,9(1,5) 6,9 (1,5) 7,3 (1,6) 8,1 (1,8) 8,4 (1,9)	Cooling Liquid Motorcraft SuperPlus meeting Ford WSS-M97B44-D specification
Manual Transmission	5 speed		Gear oil meeting Ford WSD-M2C200C specification
	6 speed
Automatic transmission	4 speed		Fluid for automatic boxes gear that meets the specification: Ford ESP-M2C166-H Ford WSS-M2C922-A1
	5 speed
Power steering		On demand	Power steering fluid Ford controls or Motorcraft meeting specification WSS-M2C204-A2
Hydraulic brake system		On demand	brake ford fluid or Motorcraft Super DOT-4 meeting specification ESD-M6C57-A
Windscreen and rear window washer reservoir		3,8 (0,8)	Freezing washer fluid not higher than -40 °С

Volume of oils and liquids Fuels and lubricants Ford Mondeo was last modified: October 2nd, 2018 by Administrator

For all motorists who prefer to change the oil in the gearbox on their own, it is very important to know how much fluid is required for the gearbox. In addition, before replacing a consumable, it is important to know other equally important information - the choice suitable lubricant, optimal tolerance and viscosity parameters, replacement intervals, as well as which oil manufacturers are considered the best. Owners of the Ford Mondeo business sedan need to know this. This article will be relevant for owners of this popular machine with a manual transmission, regardless of the year of manufacture.

In the case of the Mondeo Ford company recommends replacing every 80-90 thousand kilometers. But at the same time, it is important to recognize that such a replacement period will be relevant only for countries with a temperate and relatively warm climate, with stable temperatures and high-quality road conditions. In this case, it will be sufficient to rely only on the manufacturer's instructions.

The situation can become more complicated if the machine is constantly exposed to increased loads, used in regions with extreme temperature changes when severe frosts quickly replaced by a thaw. Besides, to adverse conditions include dirt and slush on the roads, various precipitation in a short time (snow, rain, hail). Moreover, driver errors can be added to this - traffic violation, aggressive driving style, abrupt maneuvers, shifting errors, etc. All of these can adversely affect useful properties oil, and as a result, its service life will be significantly reduced. Under such conditions timely replacement oil is more than justified. Based on this, it is not surprising why many Russian owners Ford Mondeo prefer to reduce replacement to 60 or 50 thousand kilometers. In addition, it will not be superfluous to regularly monitor the volume of oil, as well as its condition.

Checking the volume and condition of the oil in the gearbox

To check the amount of oil remaining, you will need a dipstick, which is located in engine compartment. On the probe there are special dimensional designations Max and Min. From them, you can determine the amount of liquid, and on the basis of this, make a certain decision - add oil, drain or leave everything as it is. For example, the normal level is considered when the oil is between Max and Min. In this case, you can leave everything as it is. But if the liquid is below the Min mark, then topping up is required. At the same time, it is important to prevent overflow, otherwise you will have to drain excess oil once again, which will take a lot of time.

At high mileage it is important to pay attention to the condition of the oil - most likely, topping up alone will not be enough here. What state is it in consumable, can be recognized by three key features:

• The oil is cloudy and dark
• The oil contains sediment, which hints at the presence of mud deposits.
• The oil emits a burning smell

These signs clearly indicate that it is time to change the oil. But for this, you first have to choose the right one.

Choosing oil for the Ford Mondeo gearbox

When choosing a transmission substance for the Ford Mondeo, one should first of all proceed from the viscosity parameters, on which the adaptability of the oil to a certain temperature range depends. So for Ford checkpoint Mondeo is the most optimal viscosity of 75W-90. It can be selected original oil, or prefer at least high-quality analogue, and for more affordable price. From good analog oils, we highlight the following products:

• Liqui Moly 75W-90
• Motul Gear 300 75W-90
• Castrol Syntrans Multivehicle 75W-90
• MT1L Comma.

How much to fill

The amount of oil to be filled in depends on how well the gearbox is cleaned of old oil. The maximum possible volume for a Ford Mondeo manual transmission is approximately 2 liters. Before introducing a new composition, you will need to clean the gearbox, which can be done at home. This will require a flushing compound that is run through the entire transmission system, with the engine running. Then the flush is drained and new oil is poured. Next, check its level with a dipstick.

Ford Mondeo- executive sedan business class, also known as station wagon and five-door hatchback. At the initial stages of production, it was considered relatively compact model produced since 1993. The machine has become very popular in European market- largely thanks to low price, practicality, a rich set of options and powerful motors. It is noteworthy that the Ford Mondeo was also sold in North America under Ford name Contour and Mercury Mistique. In constructive and design terms, the car was no different from European version, and it has not been optimized for the needs and preferences of Americans (meaning the types of equipment, equipment, engines, etc.). In this regard, Mondeo in the United States turned out to be a loss-making model, and sales were stopped after 2000. Some time later, the car North America renamed the Ford Fusion, which should not be confused with the platform hatchback of the same name Ford Fiesta. Besides, american fusion finally adapted to the needs local market. Since then, sales have increased significantly.

In 2007, Ford introduced the all-new Mondeo. Car fourth generation became much larger than its predecessors. The newer Mondeo was now positioned as a D-class car. Its length is 4844 mm, and the width is 1886 mm, which was then a record figure in the class.

How much oil to fill in automatic transmission Ford Mondeo

Since 2012, the US began selling the fifth Ford Mondeo/Fusion, which is a deep upgraded version fourth Mondeo. A few years later, sales were mastered in Europe and Russia.

The car received four configurations and two gasoline engines- volume of 2.5 and 2.0 liters. The power of the first motor is 149 hp. s., and the second - 199 and 240 liters. With. depending on modification.

.. 150 151 159 ..

Ford Mondeo 4. MANUAL GEARBOX OIL OR AUTOMATIC GEARBOX FLUID CHANGE

The design of gearboxes does not provide for the replacement of oil (working fluid) during the entire life of the vehicle. However, sometimes the need to change the oil (working fluid) may arise, for example, when switching to an oil of a different viscosity, when repairing a gearbox, etc.).

HELPFUL ADVICE

Oil in a manual transmission mod. iB5 merge as follows.

You will need: socket heads “for 8”, “for 19”, a hex key “for 8”, a syringe, a wide container for draining the oil.

NOTES

If the car is operated for a long time at an ambient temperature below -30 ° C, we recommend changing the oil filled in at the factory gear oil SAE75W.
1. Remove the mudguard and engine crankcase protection, if any (see "Removing and installing the mudguard and engine crankcase protection", page 75).

2. Remove the gearshift housing cover (see "Replacing the transmission control cables", page 153).

3, We recommend removing the cover of the gear shift mechanism, since the oil drained from the gearbox will spread inside the casing and then, pouring out of it, pollute the working area. To do this, unscrew the three bolts securing the casing and remove it.
NOTE

If there is a device for collecting escaping oil (for example, a curly funnel), the gear shift cover can not be removed.

A magnet is installed on the oil drain plug (shown in the photo with an arrow). Inspect it and clean it of adhering metal particles and dirt. The presence of a large number of metal particles on the magnet indirectly indicates some kind of gearbox malfunction. In this case, check and, if necessary, repair the box.
6. Wipe off any oil spills with a rag and install the gearshift cover (if removed).

7, Remove the oil filler plug...

8. ... and fill the gearbox with oil up to the lower edge of the oil filler hole (oil will start to flow out of the hole).

9. Remove any oil spills with a rag and replace the oil filler plug.

10. Install the shift cover, mudguard and crankcase protection.

Oil in manual transmission mod. MTX-75, MMTb and MT-66 replace as follows.

NOTES

Ford Mondeo - oil change

The design features of the Ford Mondeo 4 gearbox do not require an oil change procedure throughout the entire life of the machine. Sometimes this need may appear if a transition to a more viscous is required working fluid or the manual transmission was repaired.

How to change manual transmission oil

Before you change the oil in a Ford Mondeo box, you need to purchase lubricants that meet the recommendations of the automaker, as well as arm yourself socket heads 8 and 19, with an 8 hexagon, a syringe and a large container for draining the liquid.

An oil change in Powershift begins with the dismantling of the mudguard, the crankcase protective element and the gearbox housing cover. Before removing the oil drain plug, place a container under it and start draining the liquid. It is better to wait about 20 minutes for all the grease to pour out, then install the plug in place.

We wipe all the drips with a rag and put the casing with which it is closed mechanical box gears. Go to the oil filler compartment, remove the plug and pour new grease to the bottom edge of the hole. We wipe the stains again and install the cork. We assemble in the reverse order. We check that powershift box worked properly.

As for the traditional manual transmission, here the Ford Mondeo oil change is carried out according to a different scheme: We remove the mudguard and the protective panel of the engine crankcase.

• We unscrew the plug-A of the oil filler compartment, substituting a pre-prepared container under it, wait for the grease to drain completely and close the hole.
• Unscrew plug-B, fill new fluid V ford car Mondeo 5 to the bottom edge of the hole.
• We remove the streaks of grease with a rag and twist the compartment cover.

How to change the oil in a Ford Mondeo automatic transmission

An automatic transmission oil change for a Ford Mondeo is carried out using a fluid recommended by the car manufacturer. When the oil is purchased, you can start changing.

To do this, remove the mudguard and the protective part of the crankcase power unit, substitute under drainer container and unscrew the drain plug. Then you need to wait about 20 minutes until automatic transmission completely clean of the old grease, after which you can close the hole with a plug. The next step is dismantling. air filter, unscrewing the oil filler cap and filling in new oil.

When the installation of all elements is completed, you can start the engine and start warming up the lubricant. The proper operation of the automatic transmission and manual transmission is checked as follows - with the engine running, you need to remove the level and check it. The oil should be at the level up to the special mark on the dipstick.

With the help of such simple manipulations, you can independently replace transmission fluid and save money. If you want to change the oil in the engine, it is better to contact specialists. Qualified masters in the conditions of the station Maintenance they will give advice on the purchase of lubricant for the motor, after which they will quickly and efficiently replace it.