Coupled belts, unlike other means for fastening objects, are convenient during operation and are suitable for any vehicle, and therefore they are often used to quickly and securely secure different types of goods. The textile elastic tape allows you to securely secure the cargo during transportation, while without damaging the product and retaining its freight look. Such adaptations are actively used in organizations specializing in cargo transportation.
Shocking belts for cargo
In the process of weaving cargo belts, a very solid textile tape is used 25, 35 or 50 mm from polyester, based on the scope of the belt use and the discontinuous load indicator. It is also possible to make a belt coupling with an increased strength of 75 or 100 mm wide. All data on the maximum allowable load and working length are indicated on a special label, sewn into each belt. This information must be taken into account, since otherwise damage to the cargo is possible.
Long and classic castle for tie belts
Based on the design features, cargo straps for fastening the cargo are ring and hook. The design of the ring belt is a tension element (ratchet or ratchet lock) and a tape with free ends, the working length of such a belt must be chosen based on the terms of use. The hook belt is consistent consisting of a play ribbon with hooks at the ends and from a ratchet.
The ratchet (or ratchet lock) supports constant tension tension, which ensures the safety of the fixed cargo and the safety of people participating in transportation. With the help of the ring mount, you can compactly transport small load or cargo consisting of several parts so that it is not spread, and the ribbon with the hook attachment retains stretching due to the attachment at several points. At the same time, in no case can not allow the tape to come into contact with the sharp edges of the car or cargo. Otherwise, its breakdown and damage to cargo is possible.
Today, ribbons with a reverse thrust mechanism are very popular, i.e., such a mechanism pulls the tape when it starts to move down. A distinctive feature of such a belt is a handle whose length is twice as much as the handle in classical mechanisms. Such a handle gives the tape to the maximum stretch, which undoubtedly adds reliability when transporting goods. Also, such a mechanism has auxiliary guide axis that retains ribbon from friction. This allows you to carry cargo at considerable distances.
3 main rules in working with screed belts
You can not allow the load on the belt is more than that that is indicated on the sewn label. Do not try to tow or lift any cargo with a belt.
The cargo that is attached must be fixed on the surface. Take advantage of additional locking straps, mats or spacer bar, if necessary, for greater load stability.
Choosing straps coupling for fastening the cargo, you need to consider (reviews about this):
- shape, view, dimensions and weight of the transported cargo, the method of fastening the product and the method of fastening the belt angles, the indicator of the friction level between the goods and the surface;
- the form and structure of funds for fasteners;
- the presence of a label with information about the manufacturer, the maximum allowed load on the tape belt (LC), the power acting on the lever of the tension device (SHF), the preliminary tension (STF) strength, as well as the working length of the belt.
If there are more than 2 parts in the belt, then the tag with information about the specific part of the belt should be sewn into each of them.
If you use a fastening method, use a minimum of 2 tie straps. If an anchor method - use a minimum of 4 tie straps.
Rules for safe operation of tie belts for cargo fixing
Before using the belt, it is necessary to thoroughly examine it for damage. In no case can not use belts with any damage! Characteristic damage can be attributed to:
- corrosion or deformation of the metal belt elements, such as hooks or ratchets;
- various cuts on the ribbon;
- oversight lines on connecting seams.
Carrying out the cargo with a rough surface or acute parts, use additional linings, special corners and other means for greater tape protection.
Coupling straps for cargo need to be clinging for special fasteners so that most of the load from the stretched tape is distributed over the necks of the hooks.
When using tie belts categorically prohibited
- Twist or curb the tape.
- Hooks on the hooks, engage one hook with a backyard or overboard vehicles, without singles.
- Clean the belt with chemicals with high activity.
- Use a belt with apparently rusted or deformed metal lock and hooks.
- Use the tape damaged by more than 10% of its width.
- Use the tape with damage from the effect of temperature.
- Use the confusing ribbon or tape on which there are nodes.
- Use the belt or without a tag at all, or if the information is not readable on it.
You can use exclusively with tight belts without defects and damage.
Remember! The load fixed in improperly may be damaged or, even worse, harm the health or life of people and animals!
Example
It is not sufficiently suitable for a stretching belt in practice. We will imagine that the working length of the belt is 10 meters, and the stretch factor is 7%, in such conditions the belt can lengthen to 70 cm. This means that under the influence of physical load, the belt ribbon length can be greater than half a meter, which, in turn, Significantly reduces the effectiveness of the preliminary tension force (STF). To avoid this, you need to make an additional tape tape tape screed after the start of the vehicle movement.
Download price list
Accessories for tightening belts are special products with a mechanical tensioning device used to create a tensile effort when fastening goods. They are distinguished by a large variety of species, width withstanding loads. The most popular view is the standard double hook.
The tie belt consists of a tensioning device (ratchet mechanism or radiation), flat all-quality tape and connecting components (hook, terminal). The ring version of the tie belt implies the use of only the tensioning mechanism and textile tape. Flat all-purpose textile tape This is a narrow material, as a rule, a multi-layer, the main function of which is the ability to carry a load; The ribbon is characterized by its width, the coefficient of stretching (no more than 7%) and the discontinuous load. When choosing a textile tape, it is necessary to provide a three-time margin of safety, i.e. The discontinuous load of the textile tape should be 3 times the workload of the tie belt as a whole. The device is a mechanical device that is leaving and supporting the tensile force in the assembly for mounting the cargo. Conference connecting component is a device connecting a tie strap or a tensioning mechanism at the mount point on vehicle or with cargo. When selecting a tension device or an end element of a tireless belt, the ribbon width must be guided and ensuring a two-time storage margin, i.e. The discontinuous load of the metal parts of the tie belt should be 2 times the larger load of the tie belt as a whole. The present double j-hook received the greatest distribution.
| Stretch devices | A, mm. | In, mm. | C, MM. | Weight, kg | Price, rub . | ||
|---|---|---|---|---|---|---|---|
| Tensioner 0.8 tons 25 mm | 0,8 | 28 | 40 | 115 | 0,19 | 51 |  |
| Tensioner 2.0 tons 35 mm | 2,0 | 38 | 40 | 135 | 0,42 | 118,00 |  |
| Tensioner 3.0 tons 35 mm | 3,0 | 38 | 40 | 155 | 0,56 | 160,00 |  |
| Tensioner 5.0 tons 50 mm | 5,0 | 52 | 27 | 230 | 1,2 | 251,00 |  |
| Tensioner 10.0 tons 75 mm | 10,0 | 78 | 75 | 300 | 3,2 | 1062,00 |  |
| Tensioner 10.0 tons 100 mm | 10,0 | 104 | 75 | 300 | 3,6 | 1233,00 |  |
| Hooks | A, mm. | In, mm. | C, MM. | Weight, kg | Price, rub . |  |
|
|---|---|---|---|---|---|---|---|
| Hook for a tie belt 0.8 tons 25 mm | 0,8 | 27 | 46 | 6 | 0,04 | 16 | |
| Hook for tie belt 1.5 tons 25 mm | 1,5 | 28 | 60 | 7 | 0,06 | 19,00 | |
| Hook for tie belt 3.0 tons 35 mm | 3,0 | 52 | 86 | 9,5 | 0,16 | 29,00 | |
| Hook for tie 5.0 tons 50 mm | 5,0 | 52 | 86 | 12 | 0,24 | 47,00 | |
| Hook for a tie belt 10.0 tons 75 mm | 10,0 | 78 | 140 | 16 | 0,81 | 190,00 | |
| Hook for a tie belt 10.0 tons 100 mm | 10,0 | 104 | 140 | 17 | 0,93 | 205,00 | |
Triangular font
| Ribbon width, mm | Price per m, rub. | ||
|---|---|---|---|
| 25 | blue | 1200 | 7.64 |
| 25 | orange | 2250 | 12,20 |
| 35 | orange | 3000 | 14,05 |
| 35 | orange | 4500 | 19,81 |
| 50 | blue | 4500 | 20,90 |
| 50 | orange | 6000 | 21,20 |
| 50 | orange | 7500 | 37,91 |
| 75 | yellow | 11000 | 65,21 |
| 75 | yellow | 15000 | 69,00 |
| 100 | yellow | 11000 | 66,00 |
| 100 | yellow | 15000 | 69,50 |
The development of heavy vehicles presents special requirements for the reliability of fixing piece and packaged goods: after all, only lazy on the quality of roads in our country is not complaining. Therefore, any product goes on the road only after careful attachment in the car van. For this purpose, special tie straps apply. In most cases, they include a snoring mechanism, and therefore are sometimes called ratchtops (from the English Ratchet - ratchet).
Types and designs of tie belts
Coupling straps for cargo mount are produced in two types - in the form of an elastic ribbon from polypropylene on buckling type "Velkro" (which allow you to create a fastening of the material of the stretching of the material) and with a mechanical clip along the perimeter of the girth, which is provided by the tensioning device. The tape itself is made of a more rigid textile material, low-sensitive to external conditions of application. Thus, the second method, although it is constructively and more complicated, but guarantees the constancy of the effort of tightening, which does not depend on the factors associated with shipping.
Cutting elastic ribbons are two species - steel and textile. They can be used:
- With small differences in humidity and temperature;
- In the absence of long vibrations;
- For transportation of relatively small in size dimensions.
In addition, the adhesive ability of tie belts with Velkro clasp is very much changed over time to use them. Therefore, sometimes in steel clasms, the tie spring is installed. However, the allowed tightening efforts increase the slightly.
Significantly more efficient and versatile are tie straps for fastening goods equipped with snoring mechanisms. Such devices include:
- Wear-resistant tape, the parameters of which are not changed when exposed to aggressive liquid media, and other adverse factors.
- Belt fixation node - fitting, which is a steel hook or ring. The performance of the fitting is selected individually, under the belt tension force created by packaging.
- Ratchets or ratchet, which is created and supported by the necessary effort of tightening.
A tight belt with ratchet usually has two parts: a shorter, on which, in addition to the fastener element, there is also a strap lock relative to the inner surface of the wagon or body of the car, and longer, at the end of which the ratchet mechanism is mounted.
The mechanism itself consists of the following details:
- Toothed ratchet with a dog that protects the belt from spontaneous dispatch;
- Castle clutching ratchet;
- Swivel plate with spring clamp, with which the length of the belt length is controlled;
- The steel base, by means of which ratchet joins directly to the tape.
The attachment of the ratchet mechanism is made either with rings or brackets that are supplied with indefinite locks. This is a hard mount, and adjusting the length of the tie belt is provided by the presence of a movable loop on a short part of the device.
Other methods of fixation - buckles, winchs - in modern chapels are not used.
Operating characteristics of tie belts with ratchets
The selection of the belt size is made depending on the following conditions:
- Mass and dimensions of cargo.
- Character of cargo - Longs, piece packages, bales, pallets, furniture, etc.
- Transportation conditions - open platform, closed van, trailer, etc.
- Adopted cargo mounting scheme.
The following fastening options are most often used:
- Below, if at the bottom of the wagons is smooth and flat, and the goods themselves are packed on one pallet;
- Diagonal if the load has a complex configuration, and is not placed in the packaging container;
- Mixed (crosswise), if the edges of pallets or the goods are closely located to the edge of the platform, and therefore cannot be fixed behind its board;
- Combined - applied with significant high-altitude dimensions of cargo, as a result of which it is impossible to fasten it for the side surfaces of the wagon or trailer platform.
Coupling straps for fastening of goods are selected in the following sequence. Initially, the permissible width of one belt is set, which should not exceed the width of the corresponding horizontal platform, through which the tie will be held. When choosing this characteristic take into account that the standard dimensions of the tie belts in width must be selected from the following row, mm: 25, 35, 50, 75, 100 (wider executions are usually made under the order).
At the next stage, the quantity and length of the tie belts is selected. These characteristics depend on the maximum perimeter of the girth of cargo to be transported. The length of the tie belt should also take into account the distance to the hook / rings and the ability to adjust the device so that the ratchet mechanism reliably fix the cargo.
The total length of the belt is set from the following considerations:
- The distance between adjacent belts cannot exceed the greatest size of the cargo. This rule concerns flat surfaces. When packing the cargo in a protective polymer film, the distance should be reduced by no less than twice. The same applies to situations where the mount is produced in uneven (oval, round, etc.) surfaces;
- With the combined mounting of the cargo, the top gripping of the Ratchet must be performed in short, and not along the long side;
- The length of the free end of the belt should be at least two values \u200b\u200bof its width, so that the snoring mechanism is convenient to use.
The standard is the length of the belt in the range of 3 ... 6 meters, but such performances are good for owners of individual vehicles. With heavy transportation of heavy and overall cargo, it is optimal to acquire tie straps in bays, which are produced with a total length of 50 ... 200 m.
The last on the sequence (but the most important essentially) is considered to be the choice of a tie belt for the allowable effort. The limiting factor here is a textile tape, which may not withstand the efforts occurring during the transportation of the cargo.
Coupling belts for fastening of goods are made with the following values \u200b\u200bof the greatest tightener effort, kg: 1000; 2000; 3500; 5000; 7500; 10,000. Considering the safety factor, the minimum allowable reserves of strength in force cannot be less than 2 (for used belts, this value increases). Choosing a belt sizer for its maximum load, take into account the following:
- When driving a truck or trailer on an uneven road (as well as when the car is rotated or with its sharp braking), a horizontal shift force is operating equal to half of the total weight of the cargo;
- The load mobility on the platform / pallet increases dramatically in conditions of high humidity, since the coefficient of friction of rest along the dry platform is an average of 0.2 ... 0.22, and humid - 0.3 ... 0.35;
- The deformation of the elements of the ratchet device reduces the clamping force by 40 ... 50%.
Manufacturers and cost of tie belts
The price of the device under consideration depends on the width of the ribbon, its material, as well as the design of the Ratchet. The highest operational reliability has a ratchet mechanism in HFS's tightening belts from the German company Spanset (or devices produced by licenses to this company). Ratchets in HFS belts have an additional option of controlling possible weakening, which increases the safety of transportation of goods.
All the details of the ratchet must have an anti-corrosion coating, and be made of high-quality steel (not from duralumin!). Corrosion-resistant should also be fixing elements - hooks and loops.
The certificate for the material of the tape should be given the results of testing for resistance from the surface exposure of moisture and technological oils.
Coupling straps for fastening cargo after use should be thoroughly cleaned from dirt and particles of material stuck in ratchet teeth, these simple procedures extended the durability of products.
Range of prices for coupling belts of domestic production - from 50 to 200 rubles. m. For belts with low load capacity and minimal width, from 250 to 500 rubles behind the pog. m. - for belts with the highest width and allowable tension force (the reliability of the ratchet mechanism does not depend on the price). Imported products can be purchased at a price of 700 to 1000 rubles. m.
When it comes to transporting heavy, overall cargo, then many are asked: "How to bring the goods as possible and preservation from point A to point b?".
Reliable vehicle consolidation option - fixation with tie straps. What it is for which they are used, from which they produce and where to buy them will be told by the specialists of Kant Plus.
Screen straps: Briefly about the main
Why do you serve and where apply tie straps?
Use coupling belts for mounting the cargo during its transportation. With their help, the goods are fixed in wagons, aircraft, sea ships, railway transport.
Fastening with tight belts of cargo provides its immobility during movement. Using this equipment, you can be sure: the goods will not be damaged during transportation.
What are the screed straps?
Consists of a tie belt of two functional elements: textile tape and tensioning mechanism.
Textile tape is made from polyester or polypropylene material. It is durable, lightweight, moisture-resistant, resistant to the effects of atmospheric phenomena and most chemicals. Ribbons made from materials, wear-resistant and differ in a long service life. Another plus of their operation is the possibility of easy cleansing from various contaminants.
The tensioning mechanism of the tie belt is a ratchet lock (ratchet). It provides textile tension tension that helps it reliably fix the cargo. Changing straps with snoring mechanism are used to fix heavy, overall cargo. Tension mechanism made of high-quality metal alloy. Such a coupling strap with a ratchet is resistant to mechanical damage and corrosion.
How to use tie truck strap?
1. Check the stability of the cargo unit.
2. We take tie straps (for fixing with a precise way, you must at least 2 pieces, anchor - 4 pieces) and tighten the textile tapes until complete tension.
Buy tie straps at democratic prices will help you on the company "Kant Plus".
Where to buy high-quality ramp?
The production of tie belts is a rather complicated and responsible process. "Cant Plus" is a manufacturer of land operating in the market since 1997. During this period, we have gained invaluable experience in the manufacture of cable and chain rafters, textile and ribbon sling, ratchets.
We carefully control the quality of each of your products. Our products comply with all the requirement of regulatory documents. Therefore, you may not doubt that the goods purchased with us will serve you reliably and quite a long time.
In the online catalog "Kant Plus" you will find a ring tie strap and rattokes with hooks. You can choose textile fastening tapes you need the width (25 mm, 50 mm) and any length. The most common option - the Rattock of 5 m - is also presented on the web pages of our store.
We sell tie straps wholesale and retail. More information about wholesale cooperation conditions you can find out by contacting our managers. On the delivery of goods and ways to pay for payment to Cant Plus consultants.
The question arose "where to buy a rope sling?" Contact us, we will help you purchase the goods you need at an acceptable value.
Today, to perform reliable cargo mount, which is necessary with any of its transportation, many all kinds of accessories and equipment are used. However, thanks to the simple operation and high strength, tie straps are the most popular today. It is this mechanism that has a stretching device that provides maximum reliability of fixing of the cargo of any type. The company "Trading Mark" offers its customers a wide range of hardware belts of any color and species, as well as an individual approach to fulfilling each order and favorable terms of cooperation.
Features of use and use of tie belts
The importance of such a means of fastening goods is difficult to overestimate. These products are an integral part of the process of preparation of goods to transport. Their scope of application is wide enough and is not limited to the car alone. Coupling straps for fastening are loaded to be used to fix the goods to the trailer, trailer, vessel, as well as to other moving means. At the same time, the design of these products is rather simple, so everyone can use the "accessory" to use without difficulties.
All belts consist of two main parts: ratchet mechanism (directly the tensioner itself) and a flat polyester tape. This design makes them versatile, thanks to which the belts can be used even for the most fragile or painted goods. In this case, the soft textile tape will allow you to save any transported goods in integrity and without damage to the appearance. Regardless of whether the technique is transported, tools, furniture or other items - the appearance and operation of the cargo will remain unchanged.
Circuit belts for cargo, buying in our company you can at the most favorable cost, are besides elastic and easily as possible. Each model is equipped with a special stretch element, which acts as a guarantor that the tape does not weaken and does not stretch. In addition, the brass tape, which we use in our production is resistant to wear and atmospheric phenomena. Thus, the belts made of polyester are capable of functioning at temperatures from -40 to +120 degrees.
The company "Trading Mark" is high quality, reliability and durability of all manufactured products.
Advantages of tie belts in comparison with other means of fixing cargo
This type of cargo fastening today is the most popular and common. This is caused by a number of advantages that the vehicle owner receives, preferring tie straps to other types of fastening:
- convenience and ease of use. Thanks to this, the consolidation of the cargo will take a minimum of time and not even an experienced person will be able to cope with such a task. Changing belts, which in our company you can within the shortest possible time, can be easily fixed directly to the guides on any type of trailer, cars and other types of transport;
- strength and reliability. For the manufacture of such belts, we use European quality materials. Easy, elastic and high-strength textile tape allows you to securely secure the goods of any configuration and weight, thereby preventing its damage;
- wide scope. This type of mount is suitable for fixing the cargo during transportation on any driving agent, ranging from the trailer and ending with the ship. In addition, the belt ribbon can be useful to any motorist, if necessary, move the stuck car from the spot. At the same time, traction effort is made by means of a reliable tensioning mechanism;
- wide selection of color decoration. Ordering the belts in our company, you get the choice of any color to paint the product.
Criterias of choice
Before the purchased belts for the load should be determined with such parameters as the configuration of the fastening element, the length and brass belt force. For this, first of all, it is necessary to take into account the size and type of the most frequently transported cargo. The tie belt has two main elements:
- Snoring castle.
The ratchet lock is at the same time a fairly simple and reliable mechanism. It allows you to carry out rotational movements on the guide and at the same time in the opposite direction the belt does not move, thanks to the teeth of the dog, which is attached to the wheel by means of a spring.
- Control.
The belt confiler can be made in the form of a hook, rings or hooked tips, which allows you to choose the product based on the type of cargo being transported.
Our company's specialists will advise on questions of interest and help competently and properly choose a tie strap, the price of which is the most accessible and acceptable, in accordance with the parameters and type of goods transported.
Favorable cooperation
The company "Trading Mark" is an opportunity to order tie straps for any type of cargo in any color design on the most favorable cooperation terms. We offer our customers:
- high-quality coupling belts for fastening the cargo, which you can have at the most reasonable value, in a wide range;
- special working conditions and price offers for wholesale customers;
- durability and reliability of all products delivered, thanks to the use of innovative technologies, modern equipment and high, European quality materials;
- individual approach to each client and order;
- compliance with the agreed terms and delivery of goods as a short time;
- help and consulting specialists in any production issues;
- long-term, fruitful cooperation on mutually beneficial terms.
"Brand" - make a choice in favor of reliability, durability and high quality!
