Car alarm Magicar M902F is a modern premium class car alarm with two-way communication and the ability to automatically start the engine.

The SCHERKHAN MAGICAR M902F car alarm is equipped with a multifunctional ergonomic key fob with a range of up to 1500 m, the display of which, in addition to the standard information for a car alarm key fob, also displays information about the temperature in the cabin, voltage onboard network vehicle and current time.

in a keychain car alarms Magicar M902F uses a new signal encoding algorithm, which has increased resistance to code interception. The timer on the built-in clock of the car alarm key fob will allow you to set the engine start time to the nearest minute, and the "hands-free" function, supplemented by adjusting the response range, will significantly increase ease of use. The car alarm warns the owner about the dimensions that are not turned off, adjusts the sensitivity of the call sensor and, by programming additional channels, provides wide opportunities for connection and control additional equipment your vehicle.

Functions of the car alarm key fob Magicar M902F

Protection against interception of MAGIC CODE code packets
- audiovisual confirmation of executed commands
- vibration call
- loud beeps
- ultra long distance communication with processing unit car alarms (up to 1500 m)
- automatic illumination of the car alarm key fob display
- low battery indication
- voltage indication battery car
- indication of temperature in the passenger compartment
- indication of the current time
- indication of engine operation time in automatic mode
- remote start car engine
- programming the engine start time (up to a minute)
- sound and visual reminder mode about receiving an alarm message
- operational, from the key fob, programming of all system functions
- economical power supply (one AAA element)

Functions of the processor unit of the car alarm Magicar M902F

Automatic engine start of cars with automatic or manual box gear
- operation of the starting system, both with gasoline and diesel engines
- operation of the starting system with engines having a turbine
- start the engine on command from the car alarm key fob
- automatic start engine every 2 hours
- automatic start of the engine at a predetermined time every 24 hours
- monitoring the engine start by signals from the generator or by noise in the on-board network
- personal code for access to the car interior if the key is lost
- power control output central lock car
- power output for unlocking the trunk lock
- power control output alarm(two chains)
- programming the type of blocking relay
- automatic arming armed (programmable function)
- sound warning before automatic arming
- automatic return to armed mode if the door was not opened
- sound warning before automatic return to armed mode
- security mode without car alarm siren signals
- two universal programmable channels for controlling additional devices
- the ability to connect negative and positive door sensors
- input for negative trunk sensor
- locking and unlocking the door locks when starting and stopping the engine
- the possibility of arming with and without confirmation siren signals
- alarm warning about open door(programmable function)
- Panic or JackStop mode
- highly sensitive two-level shock sensor with sensitivity adjustment
- function " Free hands"- for automatic arming / disarming when the owner moves away / approaches the car
- two-mode function "Free hands"
- warning about not switched off side lights

OPERATING INSTRUCTIONS FOR MAGICAR M902F AUTO ALARM

When you insert the battery into the key fob pager, the LCD will show all the icons one by one, accompanied by music.

IMPORTANT INFORMATION

1. In order to autostart a manual transmission vehicle, the Magicar must be placed in standby mode before leaving it.

The standby mode is designed so that you can leave the car and at the same time the gear lever remains in the "neutral" position.

Do not set Standby Mode if anyone is inside. It is very dangerous to use the system if one of the door buttons does not work properly.

Your vehicle should only start in Park or Neutral. For automatic transmission. If starting in any other position, it may be dangerous to use the automatic mode.

2. This product can only be used as a car alarm, use for other purposes is not allowed.

We accept no liability for injury or damage resulting from failure to comply with the above requirements.

.

LCD indication

The Magicar Car Alarm Pager Remote Control is a unique color LCD device that visually indicates the car's security status to the owner at all times. Different icons appearing on the LCD tell you what is happening with the car at the moment.

LCD icons

Icon	Explanations
	Shows whether the Auto-closing/opening of doors mode is on or off. (Icon flashes at long range)
	Indicates whether Timer mode is enabled or disabled.
	Indicates whether Turbo mode is on or off
	Indicates whether the Passive arming mode is on or off.
	Shows seismic sensor activation
	Indicates whether the seismic sensor is on or off
	Indicates that Valet mode is on.
	Indicates that the marker lights are flashing.
	Indicates whether the siren is on or off during the closing and opening of the car doors.
	Indicates whether DPS (remote pager system) mode is on or off
	Indicates that someone is calling the owner at the car
	Indicates that the pager is transmitting a signal to the main unit
	Shows whether the sound on the pager is on or off (sound + vibrator, vibrator)
	Indicates the closed/open position of the doors
	Shows battery capacity
	1. Time 2. Temperature inside the car (F C) 3. Remaining warm-up time reminder 4. Battery voltage value reminder
	Indicates whether auto-closing of doors from ignition is on or off
	Appears when the door is open
	Appears if autostart is performed, or the ignition is on
	Appears when the trunk is open

..

Description of pager button functions

	Buttons	Time pressing	Functions
			Security mode - on / off, DPS - on / off, siren off, starter lock (Anti-theft mode) - on / off
			On Auto Arming (Auto Light)
			Long Range Auto-Arming (Auto - Blinking)
			Disabling Auto-Arming
			Recording and playback (When a voice module is installed)
			AUXILIARY CHANNEL 1
			AUXILIARY CHANNEL 2
			Poll function
			Autostart function - on / off
			Trunk opening
			Panic mode, Press I button to turn on the siren
			Siren chirping when closing/opening doors - on/off
			Valet mode - on / off
			Closing doors from ignition - on / off
			Passive security –on/off
			Timed start mode – on/off
			Turbo mode on/off
			Seismic sensor - on / off
			Programming Menu #1 - Installers Only
			Programming Menu #2 - Installers Only

Note: Successive pressing of button I switches ① -- ② -- ③ -- ①… then repeats. On ②, the Auto icon will blink.

Note: "-" means pressing the button for 2 seconds.

() means simultaneous pressing of buttons

() - means simultaneous pressing of the buttons for 2 seconds.

...

Additional button functions

1. Time setting

2. DPS and Vibrator on/off selection of temperature readings betweenCandF/

.... Closing the doors

If the doors are slammed but not closed, press button (I) for ½ second to arm and close the doors. The siren will chirp and parking lights will blink once, confirming the arming.

(I) Opening doors

If the doors are slammed and closed, press button (I) for ½ second to disarm and open the doors. The siren will chirp and the parking lights will flash twice, confirming that the doors have been opened and disarmed.

If you hear 4 chirps and the parking lights flash 4 times, this means that one of the armed zones was activated during the protection.

( I -) Auto arming

You can turn this function on/off by pressing the button (I) for 2 seconds. When auto-arming is enabled, your alarm will arm automatically after closing the last door, when you move 15-30 meters away from the car, and 15 seconds after disarming. Your alarm will automatically disarm when you get within 15-30 meters of the car.

· Enabling the auto-arming function.

The operating range will greatly depend on the level of ambient radio interference.

With pressing the I button for 2 seconds:

1) First time: Auto icon will be lit

2) Second time: The Auto icon will flash - indicating the inclusion of a longer distance

3) Third time: The Auto icon will turn off

( II -) Auto engine start

Press the button (II) for 2 seconds to automatically start the engine with automatic box gears. After receiving a signal from the remote control, the system will issue a confirmation chirp. To drive the car, you must disarm the car with the button (I), insert the key into the ignition switch and set it to the ON position within 20 seconds after opening the door. The engine will be turned off after 20 seconds if you do not have time to insert the key into the ignition switch and turn it to the ON position at this time. Do not attempt to engage the starter while the engine is warming up.

The engine will warm up for 15/25/45/5 minutes, depending on the programmed time, and then turn off. If your pager transmitter cannot start the engine, the Magicar will make 2 more attempts. If after the third attempt the engine does not start, then you need to contact an auto electrician.

While the engine is warming up, the pager indicator will show the remaining warm-up time.

( III -) Trunk opening

Press the button (III) for 2 seconds to open the trunk. Setting this mode is possible only if your car is equipped with an electric trunk activator. Note that opening the trunk will open not only the trunk, but also the doors. If a trunk limit switch is installed, the Standby mode will be disabled after opening the trunk in the mode with mechanical box gears.

( IV ) Poll status

The status polling feature allows the owner to monitor the vehicle's status as indicated on the pager's LCD remote control. Press the button (IV) for ½ second to turn on the Status Poll. You will receive one of the following responses if you are in the work area of ​​the pager system:

· After the survey, you will know the temperature inside the car in degrees Celsius or Fahrenheit.

· During the survey, you can also find out the voltage on the battery. Press the IV button on the remote control to turn on the polling function, and then one more time within 6 seconds and you will see the battery voltage.

For example, if the battery voltage is 12.6V, then you will see 12_6

.....

( IV -) Panic

Press the button (IV) for 2 seconds to enter panic mode. In this mode, the security will turn on, if the guard was not turned on, the siren will turn on and the parking lights will flash for 90 seconds. Panic mode will turn off engine warm-up if it was on. To disable the Panic mode, press the button (I) for ½ second. Then press button (I) again for ½ second to disarm and open the doors.

( I + II ) Turn off the siren

When this function is enabled, the speaker indicator will disappear from the LCD and the siren will not sound. The siren will not sound when arming/disarming, triggering a seismic sensor, or turning on panic mode.

( I + III ) Valet mode

In this mode, only the function of opening, closing doors will work. This mode very useful when your car is at the car wash or service station.

( I + III -) Disabling the seismic sensor

Press the buttons (I + III) for 2 seconds to enable or disable the two-level seismic sensor. The dual level seismic will be active 30 seconds after the Magicar is armed. After turning on the two-level seismic sensor, the pager will react as follows:

· At light blow the first level of the seismic sensor will turn on for the car and the car siren will chirp 4 times, and the parking lights will flash 4 times. The pager will issue warning signal A beep and two times the hammer icon will appear on the pager display.

· In case of a strong impact on the car, the second level of the seismic sensor will turn on and the car siren will sound from 30 to 60 seconds, and the parking lights will flash for 30 to 60 seconds. The pager will warn with sounds, the hammer icon will flash on the display.

Press the I button for ½ second to reset the alarm, the siren will turn off and the side lights will stop flashing.

( I + IV ) Closing the doors from the ignition

This function allows you to automatically close the doors 30 seconds after starting the car with the key if all the doors are closed. After turning off the ignition, the doors will automatically open. This function does not work with remote engine start, but works with ignition key start.

( II + III ) Passive Arming/Active Arming

1. You can turn this function on or off by pressing the buttons (II+III) for ½ second. The passive guard indicator will be highlighted on the LCD. When passive armed, the alarm will automatically arm 30 seconds after the last door is closed. Passive closing means that the doors will be closed and the system will be passively armed. By default, the system is set to active armed mode, which means that the system will lock the doors and arm only when using a pager.

2. If you select both Auto-Arming and Passive Arming, then Auto-Arming takes precedence over Passive Arming.

3. In manual mode Passive security will close the doors in Standby mode. In Turbo mode, Passive security will close the doors after closing the doors and turning off the ignition.

( II + IV ) Standby mode (24 hour timer)

Procedure

1. Turn off the Timer icon.

2. Set the start time. When doing this, first make sure that the time is entered correctly.

3. Turn on the Timer icon.

......

Triggering by time is possible only when the protection is on.

( III + IV ) Turbo mode

You can turn this mode on or off by pressing the buttons (III + IV) for ½ second, and the Turbo indicator will appear on the screen. In this mode, the engine will continue to run for 2 minutes after the ignition is turned on. This mode is useful for Turbo cars that need to be cooled down after a trip.

( III + IV -) Recording and playback via Voice Module (if installed)

The icon is located to the left of the Auto icon and is activated by simultaneously pressing the III + IV buttons for 2 seconds, including the Record and Playback mode of the Voice Modulator. Recording and playback can be started by pressing buttons II and III for 0.5 seconds. But if the button is not pressed within 60 seconds, the Record and Playback mode will be automatically turned off.

( II ) Auxiliary channel 1

Auxiliary channel No. 1 will turn on if button II is pressed for ½ second. You can use four different types connections (consult your installer), to close the sunroof, control the mirror or other accessories.

( III ) Auxiliary channel 2

Auxiliary channel #2 is activated by pressing button III for ½ second.

Note:

1. The output duration of the Auxiliary Channel may vary depending on the type of equipment used at the output.

2. The output of this channel is 250mA. So make sure the output is a relay or other device that draws more than 250mA. Otherwise, you may damage this device.

3. Connection of this auxiliary channel will require additional payment. Therefore, consult with the installer.

Real time remote pager function

Types: DPS (Remote Pager System), tampering or triggering a seismic sensor, will turn on the beeper of the pager and flash the indicator on the LCD. The owner alert tone will be sent to the pager until it is turned off.

Opening - one beep every 2 seconds

Seismic sensor triggered - one beep every 4 seconds

DPS - one beep every 6 seconds

These functions are only available when the vehicle is armed.

Remote Pager System (driver call)

DPS is a function that allows you to individually call the owner of the car by simply tapping on the DPS sensor located on windshield car. This tapping will be detected by the system and your pager will ring four times and the handset indicator will appear on the LCD, indicating that someone is calling you.

Disabling security using a traffic police sensor

Thanks to the new, patented DPS system, you can open doors without a key and remotes.

Programming a 4-digit password (1111-9999)

Step 1: Turn on the ignition

Step 2: Open the door

· Step 3: Knock 10 times. Each time the green LED will flash once. In this case, there should be no more than 1.5 seconds between blows.

· Step 4: The red LED will flash quickly. If this does not happen, repeat from step 1.

· Step 5: Enter your 4-digit password by tapping from 1 to 9.

To enter the first digit of the code, make the appropriate number of strokes. In this case, there should be no more than 1.5 seconds between blows. Then wait for confirmation by counting the number of flashes of the red LED. If the number of flashes does not correspond to the beats, then repeat from the 1st step. If the number of flashes matches the beats, then you can continue entering the remaining digits of the code.

Step 6: Side lights will flash once to confirm programming

Keyless entry with DPS sensor.

· Step 1: Knock 10 times. Each time the green LED will flash once. In this case, there should be no more than 1.5 seconds between blows.

· Step 2: The red LED will flash quickly.

· Step 3: Enter the password. To enter the first digit of the code, make the appropriate number of strokes. In this case, there should be no more than 1.5 seconds between blows. Then wait for confirmation by counting the number of flashes of the red LED. If the number of flashes matches the beats, then you can continue entering the remaining digits of the code. If the number of blinks does not match the number of hits, then the DPS will send a signal to the pager. Therefore, you need to return to the first step.

· Step 4: The doors will open and the pager will display this function, accompanied by two beeps.

Note: You can make up to five attempts within 30 minutes. After that, this keyless entry function will be blocked for 24 hours, or until the doors are opened using the key fob.

Seismic sensor remote indication

When the seismic sensor is turned on by hitting the car, the beeper on the pager turns on and the LCD indicator with a hammer appears for 7 seconds. Press the button (I) for ½ second to turn on the siren and flash the parking lights from the seismic sensor.

Remote tamper indication

When the alarm mode is activated, after unauthorized opening of the door, the car will turn on the siren and turn on the pager sound signal, and the open door indicator will appear on the LCD. The siren will turn on even when arming silently. Press the button (I) for ½ second to turn off the siren and flash the parking lights. Press button (I) again for ½ second to disarm.

Starter lock

In armed mode, the starter blocking function is activated. This feature blocks the starter or ignition mechanism on your vehicle, preventing the engine from starting, even with the ignition key, when armed.

Open door message

Flashing side lights will indicate an open door.

Remote Recording Procedure

If you want to replace or add a control panel, then their number can be increased to three. Perform the following procedure:

· Step 1: Activate Valet Mode/Programming Mode manually by turning the ignition key on and off 3 times from the (Acc) position to the (On) position. All this should take no more than 5 seconds. The position lights will flash once to confirm the successful completion of the step.

· Step 2: Within 5 seconds, after turning the ignition key to the on position for the 3rd time, press the button (I). The marker lights will flash once to confirm the successful recording of the remote control. Then you can record the next remote. The side lights will flash twice when the programming time is up.

User adjustment

26-2 Seismic sensor sensitivity adjustment

you need to know where the seismic sensor is located to adjust the sensitivity, depending on your requirements.

26-2 Siren Volume Adjustment

The volume of the siren can be reduced by cutting the loop that is in the siren itself.

Programming procedure for 4-button remote control

Step 1: To program menu 1, with the engine off, turn on the ignition and press buttons I and II for 2 seconds.

For programming Menu 2, with the engine off. Switch on the ignition and press buttons I and IV for 2 seconds. The siren will chirp once, indicating that programming mode has been entered.

Within 4 seconds after pressing the buttons (I and II) or (I and IV), press the button (IV) several times, in accordance with the table of programmable parameters, after selecting the parameter you want to change.

You will hear a chirp and the marker lights will flash each time the button (IV) is pressed.

Step 3: Wait a few seconds. The number of chirps and blinking of the parking lights will correspond to the selected parameter. If the number of chirps and flashing of the parking lights do not correspond to the selected parameter, then you must return to step 1.

Step 4: Press the button (I) to reset to factory settings, one chirp will sound and the parking lights will flash once. Press the button (II) to enter the parameter change mode, two chirps will sound and the parking lights will flash twice.

· If you hear a long chirp, this means that they have exited the programming mode, to return, you must return to the 1st step.

· If you want to change other parameters, you must return to the 1st step. If you are unsure of the settings you have made, reset to factory settings in Menu 1 or Menu 2 and start over.

1. Reset Menu 1 to factory settings

Step 1: Press buttons (I) and (II) once for 2 seconds. In confirmation, you will hear one chirp and the marker lights will flash once. Press button (III) once. In confirmation, you will hear one chirp and the marker lights will flash once. Press button (III) one more time. In confirmation, you will hear one chirp again and the parking lights will flash once. Press the button (III) a third time. In confirmation, you will hear one chirp and the marker lights will flash once. After a few seconds, you will hear three quick chirps and the parking lights will flash three times, confirming the reset to factory settings.

2. Reset Menu 2 to factory settings

Follow the instructions described above, only in Step 1, instead of buttons (I) and (II), press buttons (I) and (IV) for two seconds.

Programming	4-button remote control
Programming Menu 1
Programming Menu 2
Choice of options
Factory settings
Choice of options
Selecting factory settings

Programming Menu 1

Parameter group	Parameters			Button III
	Starter delay for diesel vehicles
	Light indication of an open door
	Door lock activation time
	Choice of blocking	Starter lock	Ignition lock
	Auto closing doors from ignition
	Remote start Backup mode	manual box	Standby mode is not possible when the door is open	Only manual box
	Launch duration	Standard	Standard+1 min	Standard + max

Note:

1-2 Flashing lights alarm: With this function selected, the parking lights will flash when the door is opened while the security is disarmed.

Anti-theft mode: Wire 1, 3rd connector can be used to send a signal to the ignition disable relay, anytime the car is armed, so the engine cannot run or be started with the key. A running engine can be stopped using the Panic remote command.

Starter lock and Anti-theft function : Wire 1, 3rd connector can be used to send a signal to the relay to disable the starter when the car is armed, and when the engine is running, prevents the starter from being re-engaged from the remote control.

Programming Menu 2

Parameter group	Parameters	(Factory setting) Button I		Button III
	Turbo mode
	Using the Timer
	Remote start Warm-up time
	Auxiliary channel 1				Off after release
	Auxiliary channel 2				Off after release

Note: 2-1, 2-2

If you want to use the Turbo mode and 24 hour timer from the remote control, then you need to program the main unit during installation.

Car security system with two-way communication

The new security system with a built-in adapter for matching with the digital information buses of CAN and K-Line vehicles is equipped with the latest radio signal coding algorithm MAGIC CODE™ PRO 3.

Qualitatively new level encryption of the control radio signal allows the new model to easily repel any attempts of electronic hacking, even with the use of special equipment latest generation. The fact is that the latest encryption algorithm MAGIC CODE ™ PRO 3, which is equipped with SCHER-KHAN MAGICAR 12, involves the use of two encryption keys at once, and one of them is individual, that is, suitable only for one specific system. One of the keys is used once when registering the key fob to the processor unit. Another key is also fixed in the block and is further used to encrypt commands sent over the air.

The premium model has an unprecedented wide range optional service options. The owner can use features such as "Smart Turbo Timer" (automatic detection of the engine shutdown delay to cool its turbine); Pit-Stop (protection with a running engine without a key in the ignition); "Free hands" (automatic arming or disarming when the driver with a key fob-communicator moves away or approaches). In addition, with the help additional relays in SCHER-KHAN MAGICAR 12, an optional automatic engine start function can be implemented. Autostart in new system can be made by command from the key fob or external device. There are various options for timed start: once a day or periodically after 2, 4 or 8 hours. Additionally, timer starts can be limited by the temperature in the car interior or the voltage level in the on-board network. Automatic start can be implemented on absolutely any car, no matter whether it is with automatic or manual transmission, diesel or gasoline engine or with a "virtual" start system. Additionally, thanks to the ability to connect SCHER-KHAN MAGICAR 12 to a digital bus modern car, it is possible to implement such convenient function as "Comfort" - automatic closing windows and sunroof, folding electric mirrors when arming.

Specifications

Keychain communicator

• Multifunctional 4-button keychain communicator with liquid crystal display
• Protection against interception of MAGIC CODE™ PRO 3 coded packets

• vibration call
• Long distance communication with the processor unit (up to 2000 m)
• Ability to drive a second car
• Automatic display backlight
• Key fob battery low indication
• Indication of temperature in the passenger compartment (when polled)
• Vehicle battery voltage indication (when polled)
• Battery Save Mode
• Current time indication
• Alarm function
• Parking timer function
• Indication of engine operating time in automatic start, Pit-Stop and TURBOTIMER modes
• Programming the time of automatic engine start (up to a minute)
• Economy Power (one AAA element)

Processing unit

1. Ability to connect to CAN bus and K-line car for reading and transferring data
2. Opportunity to work in SLAVE mode (control with the car's standard key fob) when connected to the CAN or K-line data bus
3. The possibility of implementing the function of automatic engine start on cars with automatic transmission or manual transmission
4. Operation of the starting system with both petrol and diesel engines
5. Starting the engine on command from the key fob
6. Automatic engine start every 2, 4 or 8 hours
7. Automatic engine start at a pre-set time every 24 hours
8. Automatic engine start taking into account temperature, on-board network voltage or by command of an external device
9. The possibility of implementing automatic start on cars equipped with a "virtual key" system
10. Personal code for disarming the system when the key fob is lost (PIN 1-code)
11. Personal code for access to the car interior if the key is lost (PIN 2-code)
12. Two-step disarming (possible using personal code)
13. Arming mode of a car with a running engine
14. "Hands free" function for automatic arming/disarming when the owner moves away/approaches the car
15. PANIC or JackStop™ mode

DOWNLOAD INSTRUCTIONS SCHER-KHAN MAGICAR 12

Instructions for exploitation of Scher-Khan Magicar 12: 4857 Kb	Instructions for Scher-Khan installation Magicar 12: 3555 Kb

Professional car security with an extended communication range up to 2000 m. A universal system that can be installed on the most modern and complicated car, thanks to the built-in module for matching with digital buses vehicle CAN and K line. Powerful security potential and a high degree of protection against theft. Multilevel protection of the radio channel from intellectual hacking. Encryption of the radio signal according to the MAGIC CODE ™ PRO 3 level, using individual keys. The call sensor will inform the owner about the need to approach the car, for example, if the car has blocked the passage. The intelligent turbo timer increases the resource of the turbine. Technological solutions of the new key fob provided excellent information content and ergonomics of use, taking into account the specifics of operation. Optional automatic engine start.

Active security

• Multi-stage system of protection against theft, taking possession of a car or attempts to break into a car, including intelligent burglary.
• PIN-1. Known only to the owner. Eliminates the penetration of intruders into the car, for example, in case of theft of keys. Provides additional protection when transferring the car to a technical center.
• PIN-2. Useful feature when the key fob is lost or the keys are stolen. Access is provided by entering the code through the call sensor.
• Protection against theft and seizure of the car - activation of the ignition blocking mode and a complete stop of the car.

Operating comfort

• Confident two-way communication in the declared range of range in dense urban areas.
• The "Smart Turbo Timer" function determines the operating conditions of the turbine before it stops and the optimal time to reduce operating temperature. This contributes to a significant increase in the operating life of the turbine.
• The SLAVE mode allows you to control the security functions from the car's standard key fob.
• Comfort function - automatic closing all windows when arming.
• "Hands free" - the function is useful when your hands are busy with bags. When you approach, the car will automatically disarm and unlock the door locks.

Specifications

• Protection against interception of MAGIC CODE™ PRO 3 coded packets
• Long distance communication with the processor unit (up to 2000 m)
• Personal code for disarming the system when the key fob is lost (PIN 1-code) and/or when the key is lost (PIN 2-code)
• Two step disarming
• Arming mode of a car with a running engine
• Hands free function for automatic arming / disarming when the owner moves away / approaches the car
• PANIC or JackStop™ mode
• The possibility of implementing the function of automatic engine start on cars with automatic transmission or manual transmission, incl. equipped with Start/Stop button
• Operation of the starting system with both petrol and diesel engines
• Programming the time of automatic engine start (up to a minute)
• Automatic engine start every 2, 4 or 8 hours, at a predetermined time every 24 hours, taking into account the temperature, the voltage of the on-board network or by an external device command
• Multifunctional 4-button keychain communicator with liquid crystal display
• vibration call
• Automatic display backlight
• Key fob battery low indication
• Indication of temperature in the passenger compartment (when polled)
• Vehicle battery voltage indication (when polled)
• Current time indication
• Alarm function
• Parking timer function
• Indication of engine operating time in automatic start, Pit-Stop and TURBO modes
• Battery Save Mode
• Economy Power (one AAA element)
• Starting the engine on command from the key fob
• Connecting to the CAN bus and K-line of the car for reading and transmitting data
• Driving a second car
• Work in the SLAVE mode (control with the car's standard key fob)

When buying an alarm, in the comments to the order, you must write on which car you will install, so that we can program the built-in matching module with digital CAN and K-Line information buses according to the model and year of manufacture of your car.

SCHER-KHAN MAGICAR 12
Car security system with two-way communication

The company-developer and supplier of automotive security equipment and accessories for cars, presents SCHER-KHAN MAGICAR 12 - a new security system with a built-in adapter for matching with CAN and K-Line digital information buses of cars. The novelty is equipped with the latest radio signal coding algorithm MAGIC CODE ™ PRO 3.

Thanks to a number of implemented innovative solutions, service capabilities provided to the user, as well as an exceptionally high level of anti-theft protection, SCHER-KHAN MAGICAR 12 can be confidently called the most advanced security system on the market. Russian market security equipment for cars today.

The built-in module for matching with digital information buses CAN and K-Line, which is equipped with SCHER-KHAN MAGICAR 12, makes it easy to integrate the novelty into any modern car. At the same time, to connect SCHER-KHAN MAGICAR 12, a minimum amount of intervention in the onboard electrical network. Therefore, the novelty will perfectly combine with standard electronics and flawlessly perform the functions of protecting the car from theft and other actions of intruders. Among the additional amenities that can be used by the owner of the car with the installed SCHER-KHAN MAGICAR 12, one should mention the possibility of operating an optional security system in SLAVE mode. This mode is interesting in that a number of SCHER-KHAN MAGICAR 12 functions can be controlled from the car's standard key fob.

A qualitatively new level of encryption of the control radio signal allows the new model to easily repel any attempts of electronic hacking, even with the use of special equipment of the latest generation. The fact is that the latest encryption algorithm MAGIC CODE ™ PRO 3, which is equipped with SCHER-KHAN MAGICAR 12, involves the use of two encryption keys at once, and one of them is individual, that is, suitable only for one specific system. One of the keys is used once when registering the key fob to the processor unit. Another key, already mentioned individual, is also fixed in the block, and is subsequently used to encrypt commands sent over the air. In addition, MAGIC CODE™ PRO 3 will use time synchronization when, for example, to execute a command, for example, to disarm, the time of the processor unit and the key fob must match, otherwise the command will be ignored by the system. All these features of MAGIC CODE™ PRO 3 make the new SCHER-KHAN MAGICAR 12 system virtually invulnerable to any smart hacking methods.

At the same time, the new encoding algorithm is characterized high level noise immunity, that is, the connection between the key fob and the processor unit and vice versa will remain stable even in adverse conditions strong radio interference or dense urban areas. Thus, the introduction of a package of new technologies made it possible to achieve reliable communication at a distance of up to 2 km.

In terms of service options, new model, as befits an innovative premium device, has an unprecedented range of optional service options. The owner can use features such as "Smart Turbo Timer" (automatic detection of the engine shutdown delay to cool its turbine); Pit-Stop (protection with a running engine without a key in the ignition); "Free hands" (automatic arming or disarming when the driver with a key fob-communicator moves away or approaches). In addition, with the help of additional relays in SCHER-KHAN MAGICAR 12, an optional automatic engine start function can be implemented. Autostart in the new system can be performed by a command from a key fob or an external device. There are various options for timed start: once a day or periodically after 2, 4 or 8 hours. Additionally, timer starts can be limited by the temperature in the car interior or the voltage level in the on-board network. Automatic start can be implemented on absolutely any car, no matter if it is with an automatic or manual transmission, with a diesel or gasoline engine or with a “virtual” start system. Additionally, thanks to the ability to connect SCHER-KHAN MAGICAR 12 to the digital bus of a modern car, it is possible to implement such a convenient function as "Comfort" - automatic closing of windows and sunroof, folding electric mirrors when arming.

Extremely important for any car alarm user is the convenience of the key fob-communicator in everyday use, its durability. According to the indicated consumer properties, the SCHER-KHAN MAGICAR 12 4-button multifunctional keychain communicator can be called one of the best. It is made from quality materials. To harden the plastic surface, a special technology with ultraviolet irradiation is used, so SCHER-KHAN MAGICAR 12 key communicators are highly resistant to shock and abrasion. As a result, the key fob-communicator of the novelty, unlike the key fob of many other systems, will remain in its original form for a long time even without protective cover. A large LCD display with easy-to-read pictograms and Russian-language inscriptions allows you to quickly perceive all the information about the current state of the protected vehicle. The display shows the state of the protected areas of the car (hood, doors, trunk, shock sensor, etc.), the fact of operation automatic modes(autostart, turbo timer, etc.), various additional data (temperature in the car, voltage in the on-board network). Keychain communicator is equipped with a vibrating alert, auto-backlight and keypad lock. Note that with the help of a key fob-communicator, you can not only control, but also quickly program all the functions of the system.

Programming and configuration of SCHER-KHAN MAGICAR 12 can also be done using a personal computer, to which the novelty is very easy to connect using a standard mini-USB connector and using a special program. The whole process is clear, which allows, firstly, to avoid errors when setting up, and, secondly, to make a choice desired parameters in the shortest possible time.

Keyfob communicator functions
Multifunctional 4-button keychain communicator with liquid crystal display
Protection against interception of MAGIC CODE™ PRO 3 coded packets
vibration call
Long distance communication with the processor unit (up to 2000 m)
Ability to drive a second car
Automatic display backlight
Key fob battery low indication
Indication of temperature in the passenger compartment (when polled)
Vehicle battery voltage indication (when polled)
Battery Save Mode
Current time indication
Alarm function
Parking timer function
Indication of engine operating time in automatic start, Pit-Stop and TURBOTIMER modes
Programming the time of automatic engine start (up to a minute)
Economy Power (one AAA element)

Processing unit functions
Ability to connect to the CAN bus and K-line of the car for reading and transmitting data
Opportunity to work in SLAVE mode (control with the car's standard key fob) when connected to the CAN or K-line data bus
The possibility of implementing the function of automatic engine start on cars with automatic transmission or manual transmission
Operation of the starting system with both petrol and diesel engines
Starting the engine on command from the key fob
Automatic engine start every 2, 4 or 8 hours
Automatic engine start at a pre-set time every 24 hours
Automatic engine start taking into account temperature, on-board network voltage or by command of an external device
The possibility of implementing automatic start on cars equipped with a "virtual key" system
Personal code for disarming the system when the key fob is lost (PIN 1-code)
Personal code for access to the car interior if the key is lost (PIN 2-code)
Two-step disarming (possibly using a personal code)
Arming mode of a car with a running engine
"Hands free" function for automatic arming/disarming when the owner moves away/approaches the car
PANIC or JackStop™ mode

Price: 12000 rub. With installation: 14500 rubles. Installation time: 2-3 hours

Car security system with two-way communication. The new security system with a built-in adapter for matching with the digital information buses of CAN and K-Line vehicles is equipped with the latest radio signal coding algorithm MAGIC CODE™ PRO 3.

Professional car security with an extended communication range up to 2000 m. A universal system that can be installed on the most modern and sophisticated car, thanks to the built-in CAN and K-Line digital bus coordination module. Powerful security potential and a high degree of protection against theft. Multilevel protection of the radio channel from intellectual hacking. Encryption of the radio signal according to the MAGIC CODE ™ PRO 3 level, using individual keys. The call sensor will inform the owner about the need to approach the car, for example, if the car has blocked the passage. The intelligent turbo timer increases the resource of the turbine. Technological solutions of the new key fob provided excellent information content and ergonomics of use, taking into account the specifics of operation. Optional automatic engine start.

ACTIVE SECURITY

Multi-stage system of protection against theft, taking possession of a car or attempts to break into a car, including intelligent burglary. PIN-1. Known only to the owner. Eliminates the penetration of intruders into the car, for example, in case of theft of keys. Provides additional protection when transferring the car to a technical center. PIN-2. A useful feature when the key fob is lost or the keys are stolen. Access is provided by entering the code through the call sensor. Protection against theft and seizure of the car - activation of the ignition blocking mode and a complete stop of the car.

OPERATING COMFORT

Confident two-way communication in the declared range of range in dense urban areas. The "Smart Turbo Timer" function determines the operating conditions of the turbine before it stops and the optimal time to reduce the operating temperature. This contributes to a significant increase in the operating life of the turbine. The SLAVE mode allows you to control the security functions from the car's standard key fob. Function "Comfort" - automatic closing of all windows when arming. "Hands free" - the function is useful when your hands are busy with bags. When you approach, the car will automatically disarm and unlock the door locks.

FAVORABLE

For motorists who care about car protection. Excellent for use in major cities, where the level of interference created by electric and radio fields is increased. A unique PIN code is written on the owner's individual card. Upgradable firmware expands the list functionality security system for each specific car, enhancing the security potential and additional comfort during operation. Quick programming of the system according to the individual wishes of the car owner when installing the model in a dealership or installation center. Warranty - 5 years from the manufacturer. Technical support by the manufacturer throughout Russia and neighboring countries. Designed to work with strong radio interference and in harsh climatic conditions throughout Russia in the range from -85 Cº to +50 Cº.