Perhaps every car enthusiast came across the situation when his car did not want to start up because of the starter breakdown. And as a rule, according to the law of "meanness", this breakdown occurs just at the most inappropriate moment when it is necessary to go somewhere. In this case, it remains to start a car without starter or closer to it directly.
But still you should not immediately hurry to start a car directly without starter. To do this, first of all, it is necessary to establish the causes of the starter failure. Because some reasons are completely eliminated independently.
We start the car without starter
Before starting decisive action, it would be nice to try to identify the reasons for the starter's output, because some of them can be alone on the spot.
To complex starter breakdowns:
- the starter relay failed
- the retractor relay is faulty
- belindix wear
- burnt winding starter.
If you have installed that the breakdown is complicated, then go to direct launch of the car, bypassing the starter. Direct methods are somewhat, I will give a few examples.
The first is the easiest lies in the presence of assistants who push you with cars and you wait for the car to have enough speed to enable the ignition key and the first gear and start the engine.
The second no less easy way is the use of towing. In this case, you are towed and you also after that the car will type the desired speed turn the ignition key and the first transmission. When this, be careful not to join the towing and do not try to join the engine.
There are cases when there are no helpers neither cable, in this case you can closer the starter and start the car directly.
In this case, they use any means with a metal base, a screwdriver, a wrench, mount. But this is if the starter malfunction is due to the failure of the retractor relay. This is when you start the engine and hear the characteristic clicks from under the hood.
So, to close the starter you will need a large screwdriver or wrench with the "zev", corresponding to the distance between the power terminals of the retractor relay, which you will need to simply close them.
But first you need to put the lever of the gearbox in the neutral position and tighten the brake to failure. The key in the lock must be given to the appropriate position. Under these conditions, the screwdriver will work as a retractor relay.
Here are such simple ways you can put the car, shortly breaking your head over the question: how to close the starter.
The only moment in this technology is a starter starter directly on the ignition contact system, make sure that the coil fails.
After all, if the ignition system, the switch monitors the supply of voltage to the coil, then there is no such protection on classical contact systems.
On contact systems it is more convenient to perform such actions with an assistant - one puts the key to the ignition position, the second is closed. Good luck to you when starting the starter directly.
OTHER INFORMATION:
All Opel Vitra owners, sooner or later, have to contact specialized technical centers, where the disassembly of Opel Vectra A is carried out in charge of the proper level and at affordable prices
