Steering wheel - an element of the machine with which the driver contacts most often. This leads to the wear of the coating of the steering wheel and the appearance of sweetes, which not only spoil the appearance, but also make driving less comfortable and comfortable. In order to restore the coating, many drivers buy in automotive stores. The disadvantage of an extraneous subject on the steering wheel is the inconvenience of car management.
In order to give the steering wheel of the car a stylish appearance, and also replaced the most detailed factory coating on a more comfortable, it is recommended to drag the wheel of the skin. This manual will be done the best option - you can not only save on the finished leather coating, but also to drag the steering wheel according to your preferences and beauty. Leather coating not only looks better and longer serves, but also allows you to improve car handling.
Selection of material for having a steering wheel
Nowadays, many types of finished goods for the steering wheel are available in stores. Nevertheless, the most advantageous option will be an independent creation of a leather coating. Benefits are not only in saving money, but also the ability to create a unique tightness for the helm of a particular car.
The best material for creating the coating is genuine leather. The optimal thickness is 1.3 millimeters, since the more subtle will quickly wear out, and thicker is characterized by a small plasticity during processing. In addition, it is desirable that the skin be taken from the sides or back of the animal - this material is distinguished by the best degree of stretching.
An excellent car steering wheel is perforated leather. It has a more stylish look, and also has a higher convenience when managing the machine due to better friction. At the same time, it is smoother of smoothly resistant to damage.
Before buying the skin for rubbing the steering wheel, it is necessary to inspect the material for cracks, breaks and other defects, as they will show themselves when creating tightness or already in operation. It is necessary to choose the color and texture of the skin so that it fit under the style of the cabin. In addition, it is recommended to buy the skin with a reserve or make sure that the seller has more material, as errors can be made during the creation process.
Least suitable materials for wear-resistant coating are dermatin and other artificial types of materials. They quickly come into disrepair and have low elasticity. That is why the skin, despite the relative high cost, is the most sought-after option.
Materials and tools needed to create rubber handling
In order to make high-quality steering wheels, you need to use several simple and accessible tools and materials:
- high quality upholstery material;
- bobbin of durable synthetic thread in the color of the tight material;
- calea needles made of steel to work with the skin;
- 2 Screen for pushing the needle;
- roll of assembly tape;
- sheet of cardboard paper A3;
- food film roll;
- a marker that gives a thick line;
- small scissors;
- two-component durable glue or epoxy resin for working with leather;
- industrial or powerful household hair dryer for drying glue.
Creating a Steering Tight Template
In order for a hauling of the helm of the skin to be accurate and high-quality, the pattern is necessary. It, in turn, requires the correct template that allows you to transfer the shape of the steering wheel to the plane - the scheme for cutting the skin.
The first step in creating a steering template is to dismantle it. It is necessary to remove the signal cover, then unscrew the nut hold on the shaft. Next, it must be swinging on the parties.
The steering wheel turns into a food film, and the greasy tape is glued to it in several layers (thus, the tape will stick only to the film). The steering wheel must be divided into several conventional parts - on the joints of the existing coating. As a rule, they are obtained four - one central and three with rounded parties. It is important to numbered or sign each element, as they differ from each other. To create a layer of scotch, you need to press the thin cardboard. Preferably - for the night.
Creating Patterns for Leather Steering Tights
The next step after the template stage is the drawing pattern. The module from the tape, pressed against tight paper, as a result may be slightly larger than the coating size that is required for the steering wheel. Nevertheless, the skin during operation will first cover the folds, after which it will be smoothed. In addition, cashing is needed in order to sew parts - it should be from the edge of 2 millimeters. Next, you need to break the template deployed on the cardboard plane, after which it is to break it with leaving your intake.
Sewing leather tights for car steering
To create a finished coating of the steering wheel, it is necessary to decompose all parts on the table as they will come into contact during operation. Next, you need to firmly sew the details of durable threads that will withstand a long period of use without causing. That is why it is important that the skin, threads and glue have high quality - ideally, such a tightness is done in years of operation.
After the tip has acquired the shape and volume, it must be performed on the steering wheel. It is important that when putting it on the steering wheel, the folds were not too large, as they cannot stretch during operation and can strongly deform all the coating with direct exposure to the Sun.
To smooth the seams of tights on a general coating background, it is recommended to cut the grooves on the steering wheel. Similarly, you can go with the edges of the parts of the material.
Leather coating steering wheel
At the stage of fixing the tights on the steering wheel, it is important to make the coating maximum adjacent to the surface and the best connection between themselves. It is necessary to flash the material crosswise. At the same time, the threads in the place of adjoining the spokes of the steering wheel are skipped and go from the back side. Custham stitches can be doubled at the site of the start of the game.
For motorists who make a similar procedure for the first time and do not have experience in a drawing, it is recommended to use glue or epoxy resin. This will make adjustment more reliable and durable, as well as correct one or other errors. The glue must be dried with a hairdryer and give it to dry. Car owners who were engaged in a hauling previously prefer to grind the skin in water - so as the coating is drying, it is better adjacent by reducing the size.
Mas Motors
