Do you know the dear reader that the seats of the car today is very high. In order for the repairmen in the car service, they should replace the seats of your car, they first put your priority that you can hardly like it. What to do if the seats came into disrepair and need to change them? Everything is simple. Learn to do it with your own hands!
Seats came to disqual
The fact that the level of comfort from driving a vehicle depends on the internal decoration and the condition of the chairs has been noticed for a long time. And no wonder in the process of production of cars known and hire ingenious designers who are capable of everybody to write everything inside.
Over time, everything agrees, including. It is clear that such damage to the eye will not be happy. Folded seats other than aesthetically unpleasant perception also cause discomfort. During the movement of passengers and the driver itself is not able to relax and the seats constantly cause inconvenience.
How to eliminate these flaws with their own hands? Nowadays this will not make any difficulty. You can eliminate everything: upholstery defects, hollows on armrests, breaks on the backrests and much more.
Often forces the repair of an accident. Even the most can disturb the integrity of the frames of the chairs, and the former Salon gloss will disappear.
Preparation
Before you start something to change, you should arm the necessary tools and, most importantly, to determine the material. Much will depend on the material :, the price for it, etc. After all, it is not the same: working with leather, vinyl or textile fabrics. Although the essence of the repair is everywhere one - a repeated coverage of the place of damage to a specially selected composition, and then carrying out heat treatment.
To begin with, it is useful to choose a color gamut with which we will work. It will depend not only from the taste of the owner, but also from the integrity of the picture. Everything should look harmonious.
We begin, of course, with the dismantling of old seats. If the seats are covered with skin, they will need to remove them. It is desirable to work at home, where it will be more convenient to arrange the skin fragments or Alcantara on the drawing material. It is recommended to sign each part of the standard cover, indicating the name of the material from which we will prepare the cut itself. Use an ordinary marker to apply labels.
Remove the standard case with car seats. We remind you that the chairs need to be removed so that the work was carried out conveniently.
Remove the old case as follows: press metal clips, located behind the back of the chairs. The case is always removed up.
After removing the case, we see the frame of the foam rubber. It will also need to remove it. There are no difficulties to deliver any difficulties, as the foam frame is held only on paper scotch.
Lumbar Pin
We will need a set of following tools and devices:
- nuts with washers;
- cold welding;
- long bolt;
- towing belt;
- homemade plate made of easily bent material.
We take a nut and clamp the plate, after which it is still cold welding pressed for reliability. Penget. It is important to pay attention to the following: the belt itself is thrown into parallel supports and the friction process occurs only the edge. Cold welding will help where the components should be increasing so that the belt lay down exactly.
Fix the belt with a long bolt so that it does not ride. For fastening the bolt is provided by glue. Thus, he will not spin and bolt will not leave anywhere.
Feathering
Go to work on the material. Shot cover will need to start up. At the same time, it is necessary to divide it into separate parts in order to be used in subsequent on the new material.
Each of the slices of the skin or Alcantara is pressed by weights to a new material. We take the gel handle and supply the edge of the material. So that the flaps are combining, placing them with short notches around the perimeter. It is worth knowing that Alcantara, like the skin, is easily cut by scissors.
Alcantara - material similar to suede more than on the skin, has a short pile. Such a pile is sent to one side. It is very important to take into account when flying, because if the direction of the pile is unequal, they can form flaws and will look bad.
The next stage in the work implies the strengthening of the skin or Alcantara Poropoon. This is a mandatory condition for competent drying. Repair of the seats of the car do it yourself - the case is simple, but in the work of this many nuances that you should know. And the foam rubber is one of the important trifles. It is necessary that the thickness of this material be equal to 5 mm, and on the reverse side, the material should be on a tissue basis.
On the video told how to repair the upholstery of car chairs:
Claper foaming only with glue-spray! All in advance fees covered covers are glued to the foam rubber, not from the side of the fabric, but from the side of the foam rubber.
It is important to know that it is impossible to smear the foam rubber for drying the seats in any case. So you can easily. The thing is that glue is able to take a deep passage in the pores of the foam rubber and, if it is a bit to surpasses, glue the entire inner structure of the material. And in the opposite position, the foam will not be returned. Therefore, it is necessary to glue the foam rubber: using a spray spray. For example, the German glue-spray MAH has proven well-proven.
When working with Alcantar, it is important when stripping the slices of flap pile in one direction.
Use when stitching you need a good sewing machine. This sewing machine will be suitable, which will be able to sew a shuttle stitch with triple advancement. Such sewing will allow the drive to slowly promote the material. About 10-30 thousand rubles.
After we sewed all parts, you need to put the seam collapse on the parties from the wrong side. First of all, we cut the strips of the foam rubber left near the obtasses, and then clean the leather challenges or alcantara for the liner. After that, we divorce the challenges to the side and pressed to the foam rubber.
The video of the car seat is described in detail:
It is important at this stage of the game to beat the stuffing material on the foam rubber. It follows the usual hammer.
Now we sew the discharge and use a double finishing line for this. It should be known that the free edges behind the thread line do not need to cut, as it will not be noticeable under the foamonalone.
We continue to repair the leather seats of the car. We turned out a new case, which we turn out from the inside is obvious and straighten. Now you need this very cover and. It seems that it is simple, but it is not.
So that everything happens, you need to start with the back. First, we do straps, and then attract the cover to the back of the chair.
At this stage of work, you can turn the usual driver's seat in the sports. To do this, we increase the seat with the help of polyurethane and attach them the necessary form. You can simply take pieces of foam rubber and glue the side of the seat. Next, you will need to cut the plates from the fiberglass of the desired shape and install on the sides of the seat. Then they stick a thin foam rubber. The whole design must be strengthened and pull as a single chair.
After you dress the back cover, you should go to the "sidushka" of the chair. Usually there will be no difficulties in this part of the chairs. Everything must go smoothly. If, of course, the seat is not embossed. Then there will have to use plastic clamps that cover is attracted to the frame. These same clamps will need to turn through the pillow. There are special holes, and then hook behind the needles. As for the edge of the cover, they need to be pulled on the chairs frame along the contour.
Repair of the skin of the seats should always end with a dryness of the thrown parts and their sweeping. It is necessary to warm up leather covers of hot air jets from a hair dryer. And it is important not to overdo it in order not to burn material. Processing hot air jet leather covers - do not overdo it!
After the skin is driving, it will stretch on the design of the chair like a drum. It does not hurt and move the seats of the ferry, but necessarily through a rag.
The hauling is completed. It remains to clean the stains that remain from the fingers and glue, as well as different sweetes.
Long time will serve, especially if you fully repair and care for the seats. In the process of the battery, other elements of the interior of the cabin can be improved, that is, doors, ceiling, panel, etc.
