By installing new stamped (aka stamping) or alloy wheels, you can transform it appearance, thus giving individuality and independence to your car. From KIA configuration Rio will depend on what type of wheels the car leaves the showroom with. For Comfort packages and Luxe the manufacturer offers stamped steel wheels R15 with original wheel caps. And the more expensive Prestige and Premium trim levels are equipped with cast alloy wheels R15 and R16. You need to take into account the tire size, for example, for R15 185/65 is suitable, and for R16 you need to take 195/55.
Choosing new shoes for your KIA Rio The typical disk size suggested by the manufacturer must be taken into account for a certain brand and models vehicle. Since the size does not match, I provoke an excessive load on the suspension, thereby reducing its service life.

The parameters of cast and steel wheels will be as follows:

— 4 x 100– bolt pattern, number of mounting holes and their diameter;
— 6.0J- this is the width;
— ET 48-52– offset, the distance between the vertical axis of symmetry and the place of attachment to the hub;
— Dia 54.1 this is the diameter of the centering hole.

Next, you need to decide which one to buy, analogue or original?

There is no clear opinion on this matter. Since some believe that the original wheels will last much longer and be safer. But others are confident that current copies of wheels are no worse in use original, but differ only in the absence serial number. For a clearer picture, you need to understand that original rim has a certificate from the manufacturer along with the car and its own serial number. As for non-originals, the quality can be very different.

What is unconditionally pleasing about such discs is their cost; for stamping a 15th diameter you have to pay approximately 1000 - 1500 rubles, but do not forget that it is very cheap analogues, may turn out to be a low-grade fake, which in itself is very dangerous. And the price range for non-original cast ones is noticeably larger; for the simplest ones you will have to pay 3,000 rubles or more. But there are also high-quality analogues of certified alloy wheels , which are made from similar blanks and using appropriate technologies. Moreover, such copies are no worse in quality and characteristics of the originals. An insignificant difference between such a copy and the original will be the absence of a serial number. And here is the price of this copies of disks for KIA Rio much cheaper.
Towards economical price category refers to stamping made from a single sheet of iron by stamping on a press. The next most expensive ones are cast light alloys, which will be more reliable than steel wheels. And the highest quality and therefore not the cheapest wheels, without a doubt, include forged ones, made from light alloys by stamping at fairly high temperatures.

Using automatic selection tires and wheels for cars Kia Rio , you can avoid many problems associated with their compatibility and compliance with automaker recommendations. After all, these components have a huge impact on whole line performance characteristics vehicle, starting from handling and ending with dynamic qualities. In addition, tires and rims are modern car are one of the elements active safety. That is why it is extremely important to approach their choice very responsibly, using quite specific knowledge about these products.

Unfortunately, or, conversely, fortunately, a significant part of car enthusiasts prefer not to study technical device own car thoroughly. Fully automatic system selection in this case is almost the only way to avoid the wrong choice when buying tires and rims. And he, thanks the widest range, presented in the Mosavtoshina online store, is very diverse.

Wheels for any car are not only an element of the exterior, but also important detail, which can affect the handling of the car as a whole. Kia Rio 2015 is no exception. Many owners believe that replacing the standard wheels on a Rio 2015 is a mandatory procedure that should be performed immediately after purchase. To approach the issue competently, you need to arm yourself with some data.

• The radius of the wheels is 15 inches. With this option, the width of the disk element should be 6 inches. The hub diameter is 54.1, and the offset is 48 mm. The fastening parameters of such wheels are within 4 x 100, and a 12 x 1.5 nut is used for fastening.
• The wheel radius is 16 inches. Technical specifications similar, but the overhang size is 52 mm.
• The optimal tire diameter for the Kia Rio 2015 ranges from 13 to 15 inches.
• The width of the wheels for better handling should be 175-195 mm.
• Acceptable profile height is 60-70 mm.

Parameters of standard wheels for the Prestige package

It is necessary to emphasize that the Kia Rio in the Prestige configuration has a full-size spare wheel. Thus, when it is replaced, you don’t have to think about imbalance or controllability. The standard radius of the spare tire will allow you to reach your destination without loss and repair a failed element.

Standard tires on the Prestige trim have a 16-inch radius. They are rarely replaced by car owners, since the quality Kia wheels Rio is at a very decent level. The width of the rubber is 195 mm, the height is 55 mm. This diameter is considered relative low profile. This indicator often causes fear among newly minted Kia owners Rio. It is believed that low-profile wheels make the ride quite harsh, and they are also more vulnerable on bumpy asphalt and are easily susceptible to holes. Contrary to popular belief, this is far from the case. Replacing such “rollers” on the Kia Rio is not required. They are made of high quality rubber and have increased wear resistance.

Basic rules when buying tires for a Kia Rio

Replacing tires and wheels requires a responsible approach and compliance with some basic rules:

• Spare parts should be selected based on the manufacturer's recommendations. They are reflected in the instructions for Kia operation Rio. It is necessary to choose not only the appropriate diameter, but also the width and height of the profile.
• Replacing wheels is the job of highly qualified automotive technicians. They should be entrusted with the work, avoiding handicraft garage workshops.
• Some manufacturers of wheel parts offer “all-season” for the Kia Rio. Experienced motorists refuse this option so as not to risk their own safety. It is much safer to purchase winter and summer tires separately.
• Replacing elements with “stampings” made in China simply unacceptable. Such wheels on the Kia Rio are very vulnerable to mechanical stress, and the tires are a source of increased noise when driving. In this case, the actual wheel diameter may not coincide with what the manufacturer stated.

Tire replacement and selection parameters

When choosing tires and wheels for a Kia Rio, it is optimal to use the services of automatic programs. Usually they are an integral companion of any online store that offers to buy “rollers” for the Kia Rio. For an error-free selection, you must indicate:

• year of manufacture of the vehicle;
• type of motor and drive;
• radius;
• load capacity;
• the presence or absence of spikes for winter elements;
• seasonal appointment;
• brand.

As for the load capacity, its optimal parameter helps to significantly soften the movement. Quality is important road surface on which the machine will be operated. The worse it is, the softer and more flexible the rubber should be.

Consequences of non-compliance with the technical specifications of wheels and tires

If the rollers are replaced in violation of the manufacturer’s recommendations, the consequences can be very dire:

• Neglect technical requirements significantly impairs the vehicle's maneuverability. Due to the wrong wheel size, handling and traction on icy roads may deteriorate. The car may skid.
• Can be heard in the cabin extraneous noise. They occur due to improper air flow circulation between the rim and the fender liner.
• The hub clamp may prevent the disc from sitting tightly against the base. In this case, the entire reliability of the structure is jeopardized.
• If the rollers are replaced in violation of the manufacturer's requirements, the warranty may be void. This happens when there is warranty case associated with failure of wheel elements and systems. In case of violations, the car owner will have to purchase new spare parts at his own expense and pay for the work to replace them. Denial of warranty repairs is absolutely legal on the part of the official dealer.

Interesting! Since the very first model, Kia cars have used rubber various sizes. Practicality has always been the main criterion.

Thus, for small city Kia Rio models, wheels with a diameter of only 13 inches were used. This made it possible to reduce fuel consumption and also reduce the load on the small engine. This lasted until 2005, when Kia model Rio with 1.4 liter engine.

Since 2005 on automotive market The second generation of Kia Rio cars has appeared. New cars were equipped with more powerful engines, which means the wheel diameter could be used larger.

Tires with a radius of even 15 inches began to be used. Some 2013 car models are equipped with a 1.6-liter engine and allow tire sizes with a radius of 16 inches.

True, in this case, low-profile tires are used, which makes such a car exclusively for city dwellers.

In 2015, new Kia Rio cars stopped using wheels with a diameter of less than 14 inches.

On Rio models They began to install wheels on disks with a large offset. The width of the wheel rims has increased by half an inch.

Does tire width matter?

The short answer is yes. Width of wheels used for car Kia Rio can vary from 175 to 195 mm. These parameters may not seem so significant, however, changing them always affects the dynamics and fuel consumption.

Important! The smaller the tire width, the lower the consumption. However, this should not be abused, as the car’s stability on the highway will suffer and dynamics will be lost. When choosing these parameters, you need to find a balance.

Tire width affects the size of the wheel's contact patch with the road. An increased contact patch makes the car more stable and controllable at high speeds.

IN winter period time, the contact patch also significantly affects the braking distance.

Although the manufacturer allows some variety in the choice of wheels for installation on the Rio model, it is important to understand what effect you want to achieve. It's about how the car will be used.

Let's say the car is used in rural areas, where the expensive ones are, to put it mildly, not very good. In this case, you should use rubber with high profile. Another solution is to use rims that are a size smaller and wheels with a high profile.

Interesting! To correctly calculate the required tire size, use tire calculator, which is available on most sites that sell rubber.

A similar technique is applicable in reverse side. If your car drives exclusively on the smooth streets of the capital, you can put big wheels with a low profile.

This will give your car a certain chic and attractiveness. You can easily calculate the required tire size using a tire calculator.

Two wheels may differ in load index, although they are the same size and have the same diameter.

The load index is measured in kilograms and displays maximum load that the wheel can withstand.

Exceeding this indicator for a short time is acceptable, but it should not exceed 20%.

Kia Pio cars use tires with a load index of at least 88Q, which means that the tire can withstand a load of up to 545 - 560 kg. Letter designation Q indicates the speed index.

The speed index indicates the maximum permissible speed, at which the tire will fully perform its functions and be able to carry the specified load.

For example, the speed index Q indicates that the tire is designed to travel at a speed of no more than 160 μ/h.

Important! On Kia cars It is permissible to install tires with speed indexes Q, R, S and T. This corresponds to a speed range from 160 to 190 km/h.

It is possible to install both directional and symmetrical tires. What's the difference? They do not differ in size or weight, and the diameter does not matter either.

Tires with a directional tread have improved performance compared to a symmetrical tread pattern. They better remove water and snow from the contact patch and retain other positive characteristics.

The only drawback of directional wheels is that the direction of rotation must be strictly observed, which means you cannot simply move the wheel from the left to the right.

On the other hand, tires with a symmetrical pattern are a classic option for new Kia Rio cars, and this applies even to some expensive models.

These tires do their job well and are easy to replace or move to the other side without re-flipping the tires.

Choosing tires for Kia car Rio must first follow the manufacturer's instructions.

You should ask yourself these questions:

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose wheels for Kia Rio? To clarify all the choices, you need to understand how it works car wheel, study existing species disks, their pros and cons.

Weight matters

Car disk It is a simple flywheel mounted on a hub. To set it in motion, you need to expend a certain amount of energy, the source of which is fuel. And the greater the mass of the wheel, the more fuel will be required to spin it. But it is much more difficult to stop the wheel when its rotation speed is very high. At that moment on braking system there is a very heavy load. Therefore, not only the comfort and controllability of the car, but also the safety of passengers in the cabin depends on the quality of the disc and the materials used to make it.

Modern wheels are made of steel and various light alloys, which give them a number of advantages:

1. Welded steel disc. This is a familiar stamped version that boasts a low price and durability. It is these discs that have the heaviest weight, are easily deformed and are more susceptible to corrosion than others. But with all their shortcomings, they are not so bad - if after falling into a hole the disk is dented, this can be quickly corrected at a service station.
2. Alloy wheels(cast and forged). They have much lighter weight, high anti-corrosion and strength properties and many design solutions. But they are already much more expensive. Alloy wheels when subjected to strong impacts, they do not bend like steel ones, but crack. Forged They can withstand the strongest impacts and are practically impossible to bend.

Let's summarize all of the above

• If you do not drive at very high speeds, are limited in money and the roads in your city are not of very high quality, feel free to purchase steel wheels on Kia Rio (but together with decorative caps).
• If the “appearance” of a car is of paramount importance to you and high-speed driving is not alien to you, then it is best to purchase alloy wheels. But you must be prepared for the fact that they may burst - then you will need to buy new ones, because alloy wheels cannot be repaired.
• If you are an amateur sport riding And high speeds, then only forged wheels on the Kia Rio will be for you optimal solution. Their unique properties will allow them to be used for a very long time even under intense loads, because it is almost impossible to disable them. But the very high price of such wheels is the only drawback that prevents everyone from buying them.

Our conclusions are advisory in nature - each car enthusiast decides for himself what suits him best. Online store for wheels Wheels for free can make things easier for you with help by car make right on its website. Thanks to this service, you can quickly and easily purchase wheels that are optimal in price/quality/appearance for your car. This will allow it to become more functional, reliable and attractive!