Winter season is traditionally considered the most difficult for motorists. In crude and cold weather, the engine launch often becomes a very difficult task with many unknown. One of the very common problems faced by drivers - spark plugs, fused by gasoline.
Why pours candles?
In order to know and understand which actions must be taken after "wetting" of candles, you need to represent what is happening with the engine at a time when the key turns into the ignition lock. The process originates from the starter, which, as it were, a small electric motor, gradually begins to turn the engine.
In a chamber intended for burning fuel, a mixture of oxygen and gasoline appears, delivered there with pistons and valves, "awakened" starter. The ignition candle gives a spark, from which the mixture compressed by pistons is flammable, as a result of which the microwave occurs. The energy that is formed by them is in a single whole chain of working cylinders.
It is easy to guess that without a spark formed by an ignition candle, the engine is not capable of working. It must be said that in the case of raw or cold weather, the mixture may not occur even with working candles. If the temperature of the medium is lower than -15 degrees, then the mixture is cooled so much that it cannot be obtained by the necessary heating reaction, which should allow you to work as a spark. Because of this, the mixture can pour candles, and then they cease to function.
We solve the problem of radical
What then to do? There are several solutions to the problem. The simplest is to remove old spark plugs, after which it is for some time to wait, and screw the new kit using a special key. This method implies the presence of spare spark plugs. But not to all owners of the car, the soul of such a false solution of the problem: After all, the situation may repeat, and every time it is not too economical to buy a set of candles.
Method for economical
The next output will suit the lean drivers. Blood candles should be turned out and attributed to the warm room. Next you need to warm them to a temperature determined by visually by each motorist. It is believed that for the most effective cleaning from the traces of the mixture and Nagar, the candle should be administered hot. However, not everyone is advised to do so, as this spoils the ceramic core of the candle. In addition, after exposure to too high temperatures on the candle, its surface loses the smoothness and requires polishing with emery paper or skurt.
Quick engine start
And finally the fastest way. See the candles using the starter. To do this, press the gas pedal and screw the engine starter for a while. Fresh air dries as candles and cylinders, due to the fact that fuel due to an open throttle will not go to the combustion chamber. The machine must start after gas supply. This method is good what can work on machines with any engine. A significant minus is that there is a real threat to "plant" the battery before drying candles and get the second trouble.
