Dodge Rama 1500. With the rear spring suspension went from 2009. Official carrying capacity of this car is 700 kg. A car with a pickup body on springs is experiencing some discomfort in terms of the feasibility of cargo transport in the car body. When loading the pickup body Dodge with 1500. There are several full 200 liter barrels, equipment, generators, bags with cement, logs, quad bikes, snowmobiles, when connecting trailers and residential modules on the trailer and other necessary things to which the vehicle is calculated for the maximum springs compression. Frame owners often turn to us with a question How to increase loading capacity Dodge RAM.

There are several ways to increase loading capacity Dodge RAM 1500:

1. Replace springs At reinforced with maximum stiffness.

These option is characterized by a low tuning price and fairly simple installation. There are a few minuses in installing hard springs on any car, this is not a comfortable movement on an empty car, especially with long trips can exist all the soul and spine. Children and adults may experience hard suspension discomfortwith a blank body. Strengthened springs still asceve with time with frequent loads and car overloads. Springs do not have a progressive characteristic when changing the axis load.

2. Installing pneumaticpers in the Dodge Rama Springs.

This option is distinguished by the prostate of installation, low cost (often cheaper purchases of reinforced springs and their replacement). Pneumatic bullons are installed in the springs and pumped up with air depending on the load of the car. The car becomes more comfortable and shot down. Most of the irregularities of the road surface are quenched (pits, bumps, sleeping police, graving and other "joy" of the road). With the help of installed pneumas also increase the carrying capacity of the machine, due to the fact that Pneumolement Does not suit the car when loading. This method has progressive characteristics due to changes in pressure in pneummobalona Depending on the load in the RAM body.

3. Installing an additional axial set of pneumatic suspension specifically designed for Dodge Ram.

This option allows you to significantly exceed the maximum passport values \u200b\u200bof the carrying capacity. Pneumolementsleeve type Mounted on the rear axle of the car near the spring suspension. Even if you damage somewhere pneummatoresor Or the pneumatic train, the car remains on the native springs and can reach the destination or repair. An example of such an installation is presented in our report below.

This project was installed with the receiver:

We recommend always installing the air preparation system with the receiver. The receiver allows you to raise the car even with a significant overload. In all receivers, the pressure sensor is used on 8 atm. It is designed to automatically maintain the required pressure in the receiver from 6 to 8 atm.

This is how the panel with pressure gauge and pneumoclavicia controls looks like:

At the request of the client, installed under the driver's seat:

View from the inside of the driver's chair:

The entire air preparation unit was installed in a special body niche:

View from above:

This air preparation kit is not afraid of frosty morning due to built-in heating in the distribution part pneumatic suspension.

That's how attaching stocking of pneumatic suspension on the back axis Dodge Ram:

Also, pneumatic bullons like "stocking" allow you to raise the car up to 8 cm. Unlike all other types of pneummobalon.

With this project it was possible to use 2 item on Increased lifting capacity- Install Pneumatic bullons in the springs of Airspring.

General view of the installed set of pneumatic suspension Dodge RAM:

Dodge RAM car with pneumatic suspension on the back axis:

The installation was manufactured in our branded installation center on Leninsky Prospekt d. 117 в г. Moscow: This kit can be installed and independently using detailed installation instructions with photos in Russian. The estimated time of this installation is 5-6 hours.

Our social channels:

Our online store is pleased to offer you a set of auxiliary pneumatic suspension on the Dodge Ram 1500 (rear axle), for self-installation on the most favorable terms!

This equipment is the easiest and most convenient way to increase the lifting capacity, handling, comfort of your car, as well as significantly reduce wear of the elements of the standard suspension!

The pneumatic suspension kit is designed specifically for the Dodge Ram 1500 and includes two pneumatic elements, mounting brackets to frame and bridge, fasteners, accessories for pumping from an external compressor, instruction.

By installing the auxiliary pneumatic system for amplifying a spring suspension, you get:

• Increased lifting capacity without damage to the car

Pneumatic powder allow the suspension to cope with loads up to 4 tons!

• Decreased wear of spring

Staff springs are unloaded and operate in "greenhouse" conditions.

• The possibility of installation on "tired" springs

Install the pneumatic produce on the springs requiring replacements and they will last for a long time.

• The correct position of the body at any download

The body is always horizontally, and this is the correct work of the head light and reducing the braking path.

• Reducing car rolls

Pneumatic powder hold the car from rolls in turns and level it with uneven loading.

• Enhance comfort

The overall increase in comfort and good exploration of road irregularities.

• Increase the profitability of your fleet

Pneumatic suspension is an opportunity to transport 2-3 times more cargo in one flight.

A set of auxiliary air suspension on the Dodge RAM 1500 is installed in addition to the standard car suspension and reduces the load on the springs. Installation of the air suspension will allow the Dodge Ram 1500 to transport more cargo without loss of controllability, will save from sumps the springs and their breakdowns, reduce the splint of the body and roll. Pneumatic suspension for Dodge Rama 1500 is a great solution for increasing the service life of the standard suspension.

900 1200 Pneumatic suspension Dodge Ram 1500 (09-), rear axle, option Comfort, Aride

The pneumatic suspension kit is designed specifically for the Dodge Ram 1500 and includes two pneumatic elements, mounting brackets to frame and bridge, fasteners, accessories for pumping from an external compressor, instruction.

Pneumatic suspension Dodge Ram 1500 (09-), rear axle, option Comfort, Aride 900 1200 Pneumatic suspension Dodge Ram 1500 (09-), rear axle, option Comfort, Aride

Installation of auxiliary pneumatic suspension does not require special skills and takes an average of 2 hours. Install a set of auxiliary pneumatic suspension for Dodge Rama 1500 possible: in our workshop, in any car service, as well as with your own hands.
For the convenience of controlling the suspension from the car's cabin, it is recommended to purchase a control system. ARIDE can offer several options for controlling the pneumatic drying Dodge Rama 1500: from simple and budget, to specialized with additional features (for example, wheel swap)

Pneumatic suspension Dodge Ram 1500 (09-), rear axle, option Comfort, Aride 900 1200 Pneumatic suspension Dodge Ram 1500 (09-), rear axle, option Comfort, Aride

A set of auxiliary pneumatic suspension for Dodge Ram 1500 You can purchase from the official manufacturer of pneumatic suspension in St. Petersburg ARIDE at an affordable price with a quality guarantee. Our company produces serial set of pneumatic suspension for commercial transport for more than 10 years. You can always contact us and get advice on any sets of pneumatic suspension, as well as find out the price of the pneumatic suspension for any car.

Full description:

Pneumatic suspension Dodge Ram 1500 on the rear axle Auxiliary air suspension kit on the Dodge Ram 1500 is installed in addition to the standard car suspension and reduces the load on the springs. Installation of the air suspension will allow the Dodge Ram 1500 to transport more cargo without loss of controllability, will save from sumps the springs and their breakdowns, reduce the splint of the body and roll. Pneumatic suspension for Dodge Rama 1500 is a great solution for increasing the service life of the standard suspension. The pneumatic suspension kit is designed specifically for the Dodge Ram 1500 and includes two pneumatic elements, mounting brackets to frame and bridge, fasteners, accessories for pumping from an external compressor, instruction. Installation of auxiliary pneumatic suspension does not require special skills and takes an average of 2 hours. Install a set of auxiliary pneumatic suspension for Dodge Rama 1500 possible: in our workshop, in any car service, as well as with your own hands. For the convenience of controlling the suspension from the car's cabin, it is recommended to purchase a control system. ARIDE can offer several options for controlling the air suspension Dodge Rama 1500: from simple and budget, to specialized with additional features (for example, wheel swaps) Auxiliary auxiliary kit for Dodge Ram 1500 You can purchase at the official manufacturer of air suspension in St. Petersburg ARIDE at an affordable price. With quality guarantee. Our company produces serial set of pneumatic suspension for commercial transport for more than 10 years. You can always contact us and get advice on any sets of pneumatic suspension, as well as find out the price of the pneumatic suspension for any car. Characteristics - Pneumatic suspension Dodge RAM 1500 Type of pneumatic element (pneumatic production) 115 / Roll diameter without pressure, mm 115 Load capacity No less, kg 1000

Ways of payment

Warranty of money refund within 30 days.
Want to return? Easily! Many are refused shopping on the Internet, as it is worried that in reality, the selected thing will not justify the expectations. We understand such doubts, so we offer our customers a special service - a refund for any reason within 30 days after receiving the goods. You can calmly order everything you want. If upon receipt and during use it turns out that the goods are not the same as you imagined it, just return it to us and get your money back! Return the purchased thing and pick up your money very simple, for this it is enough to write an application for refund and send it to email. mail [Email Protected]website

Delivery

Registration in the traffic police

Amending the design of vehicles (TC) regulate the following basic regulatory documents:

• 1. Order of the Ministry of Internal Affairs of the Russian Federation of 07.12.2000 No. 1240 "On approval of regulatory legal acts regulating the activities of the traffic police of the Ministry of Internal Affairs of the Russian Federation for Technical Supervision"
• 2. Order of the Ministry of Internal Affairs of the Russian Federation of November 24, 2008 No. 1001 "On the Procedure for Registration of Vehicles".

Wishing to register changes to the construction of the vehicle, it is necessary to produce the following actions:

1. 1) Fill out an application for making changes to the design of the established form (you can get into the traffic police), contact him to the head of the traffic police department. This statement makes a decision.

   When making a decision, the traffic police unit, depending on the changes made to the TC design, determines the procedure and conditions for the design and issuance of a certificate of concerning the vehicle requirements, as well as the need to obtain a conclusion about the possibility and procedure for making changes to the vehicle design (hereinafter the conclusion ) Either determines the absence of such a need.

   In this question, the traffic police is guided by the above regulatory documents, in which it is not necessary to conclusion in what cases:

   The vehicle after the changes made to its design corresponds to the vehicle certified in the prescribed manner of the same brand and the same manufacturer

   The changes made are provided for by a list of changes in vehicle designs, which can be carried out without a conclusion (the list is provided in Appendix No. 2 to the order of the Ministry of Internal Affairs of the Russian Federation of 07.12.2000 No. 1240, the installation of power bumpers, larger wheels, the swans are not included in it).

   If, when making changes, you need a conclusion, then in it, in addition to the changes and the requirements for them, recommendations are indicated on the selection of the production base, on which this type of work is possible (is determined by the Organization of the Commissioner to extradite).



2. 2) The next step of the procedure will appeal to the owner of the car to such an organization to obtain a conclusion (the list of organizations must be provided by the traffic police).


3. 3) After receiving the conclusion, the owner makes changes in the design of the TC (who has the right to produce work, the organization or owner is determined by the conclusion).


4. 4) After the production of work on the change in the design of the vehicle, the owner of the car receives a statement from the manufacturer a statement declaration on the volume and quality of work performed. With independent work of work, the owner's declaration is filled with the owner and signed by them.


5. 5) Next, it is checked by the technical condition of the TC design for compliance with the requirements of regulatory documents in the field of road safety (simply, it is necessary to undergo inspection), according to the results of the CU owner, a diagnostic map is issued.


6. 6) After the above actions, the owner of the TC represents the traffic police department:
   - identity document;
   - a document confirming the right of ownership, use and (or) TC orders;
   - Passport TC (TCP) and certificate of registration of the vehicle;
   - application and decision on it (paragraph 1);
   - conclusion about the possibility and procedure for making changes to the construction of the vehicle;
   - diagnostic card;
   - certified in the prescribed manner copies of compliance certificates for the components used for conversion and equipment, spare parts and accessories subject to mandatory certification (here it is needed, a certificate for bumpers).
   - a statement declaration on the volume and quality of work performed with a copy of the certificate (if the work was performed on a certified enterprise - is determined by an authorized organization, issuing)
   Together with the specified documents, the owner of the car presents its vehicle for identification.

When performing all these conditions, the traffic police cannot refuse registration actions (any refusal of registration actions should be carried out in writing indicating the reason). This is the order, quite simple, many of him passed, say nothing complicated.