To restore the car on your own, you need to take care of the interior. It is this part that suffers most from exploitation and needs high-quality painting. The driver spends a lot of time here, his communication with the car consists in the use of interior details. Therefore, they should always be kept in perfect order. To prevent paint for plastic cars from peeling off and shedding ahead of time, you need to use the recommendations and purchase high-quality materials. Your car will again become more attractive and will be able to please you with wonderful emotions during operation.

Plastic parts are the hardest to paint. Here, the structural surface creates certain difficulties during restoration, does not allow normal cleaning of the old paint layer and the application of new materials. In order for the plastic in the cabin to be like new, it must be looked after, treated with polishes and protective equipment. If the appearance has already deteriorated, you will have to take on the repair work. In working with the interior of a car, the most important stages are the correct choice of products for painting, as well as competent processing of the part before applying materials.

Choosing high-quality paint for interior parts in a car

The selection of suitable materials is one of the most difficult stages of a job. If you have never faced any questions, plastic restoration will become a rather difficult process for you. Auto needs a professional approach at every stage, including when choosing products. You do not need a primer for salon elements, but specialized materials for painting will come in handy. You need to pay attention to the following points:

• special purpose for plastic - you can use products for a car bumper;

• the ability to paint structural surfaces, which is inherent in all car paints for such tasks;

• manufacturer - select well-known companies such as Motip or KUDO, you can use the Polish Farbid;

• price - if the cost is too low, there is a possibility of purchasing a fake instead of the original;

• form of packaging - the easiest way to work with aerosol versions, since they do not require a compressor.

It is also worth getting a rag, solvent and think over devices for hanging or laying plastic parts when applying paints and varnishes. Take care of everything in advance so as not to run around in search of scrap materials around the car when work has already begun. It is best to paint the interior elements of your car with products with a quality guarantee. In the store, upon purchase, you can ask for documents for the goods.

Interior preparation and processing of old paint

The plastic inside the car needs a very high quality processing. The specificity of painting materials is such that improper application will be fraught with drips, color transitions and unpainted parts. All this causes certain difficulties. The paint for the interior plastic can lie normally only with preliminary preparation of the part. To do this, a fairly simple procedure is performed with the following procedure:

• Parts are dismantled from the car. This must be done with care as some of the plastic parts are very easy to damage. If we are talking about panels and door cards, you can leave them in place by closing everything around.

• If the enamel is applied to a greasy and dirty surface, all the paint material will simply drain off. So, to begin with, the plastic is degreased, it is cleaned from all kinds of contaminants.

• The next step is to wash off the old paint using water and fine sandpaper. Apply P 1500-2000 on a water-resistant base and continuously apply water under the abrasive.

• Further, the salon is protected from paint on all kinds of elements, otherwise they will have to be wiped off later. To do this, use thin masking tape and film or newspapers, creating protective screens.

• Last but not least, degrease the surface again and apply paint with gentle movements. This will help to quite simply maintain the flatness and quality of the plastic surface and return freshness to the interior.

In order for the car to become beautiful again, you must apply the purchased materials with high quality and without errors in the process of doing the work. Otherwise, the paint will run off, will not dry out, or will be very different in color. Remember also that when painting local plastic parts, you will have to use the transition staining method. This is not possible with a spray can; professional equipment is required. Paint for interior plastic is sold not only in aerosol form, but this is how it is most convenient to use.

How much paint should I buy for interior parts?

Structural surfaces are unpredictable when applied to paint products. In one car, a 400 ml bottle is enough to paint the entire interior, while in another, the same amount of material will be spent on one large part. It is difficult to predict the flow rate. Each car is different, but there are certain general criteria. When purchasing materials, consider the following features:

• you should not buy less than 400 ml, although you can find more compact packaging on store shelves;

• an aerosol can with a small volume will quickly lose normal pressure and will not help to paint the interior with high quality;

• if you plan to paint plastic throughout the cabin, you should immediately buy at least two cylinders with a margin;

• before painting the plastic, you will have to do a training painting of unnecessary auto parts for experience;

• for a normal result and a successful car repair, it is better to have more aerosol than you need.

Considering the democratic cost of cylinders, you can take products for a car with a small margin. You can always find something else to paint in the car in order to get the normal operation of the interior of the vehicle. But to paint one small car part, you don't need to buy too many paint products. Otherwise, the cost of your car restoration venture will be too high.

Summing up

Every car owner wants to make their transport more attractive. There are many ways you can accomplish this noble undertaking. But often methods with the involvement of professionals are too expensive. Therefore, potential customers for painting booths and service stations prefer to buy the necessary paint on their own and do the work with their own hands. It's much cheaper, but it doesn't always come out to get the results you want. It is important to choose the right methods and tools.

When working with plastic, it is worth protecting the interior as much as possible from enamel ingress, preparing a part for applying auto paint. Also, do not forget that there are quite a few brands on the market that offer paint products in a variety of price segments. It is much easier to immediately buy good material and then not overpay for the restoration of poor-quality painted parts. It will be cheaper and more profitable in all aspects, and the owner of the vehicle will be able to prove himself in taking care of his car.