Among the variety of different burglar alarms that exist today, the Panther system is especially popular. This is largely due not only to high reliability of this system, but also, to a large extent, the simplicity of its installation on various models cars, as well as the presence of detailed recommendations explaining how to connect a panther alarm.

But for the siren the best place, just in the engine compartment - in a place well protected from third-party access. The main thing is that it should not be close to moving and very hot engine elements. To prevent the accumulation of moisture in this unit, its socket should be directed downwards. Mount the siren with a bracket and a few screws.

The set of the Panther system necessarily includes a limit switch, with the help of which the protection of the car hood is ensured. This switch should be installed on a metal surface connected to the common "mass" where moisture does not accumulate, for example, on the side surface of the wings in the area of ​​​​the hood (trunk). At correct installation the limit switch must have at least 6 mm of travel when closing the hood (and also the trunk, if there is a second, similar switch).

A red LED signaling the state of the security system is placed on the dashboard in a place that is clearly visible from the outside of the car and, at the same time, the indicator should not distract the driver. Before you start drilling a hole for it, you must first make sure that with reverse side there are no wires and other elements.

Determination of a place for the Valet switch requires special imagination, since, on the one hand, it should be easily accessible, and on the other hand, an attacker should not quickly find it and turn off the alarm.

For the shock sensor, the most convenient place is a hard surface between engine compartment and salon (from the salon). Sometimes it is attached with constrictions under dashboard or on the steering column. In any case, the sensor must be good access to make the adjustment.

The standard panther car alarm connection scheme provides for the following distribution (in accordance with color marking) and connection of the main wires:

• The wire white color, providing flashing parking lights when the system is triggered, as well as at the time of arming and disarming, it is connected to the parking lights circuit (if the circuit is of negative polarity, then through an additional relay);
• The red wire, designed to power the system through a + 12V fuse, is connected to the positive terminal of the battery ";
• White / red wire + 12V power supply of the central unit - through a fuse it is connected to the red wire;
• White / black siren output wire - through a rubber bushing, it is laid to the siren installation site;
• Wire dark - of blue color, used for the purpose of remote trunk opening - connected to terminal 85 additional relay. Please note that connecting this wire directly to the lock circuits is strictly prohibited;
• Green / white wire that controls the interior lighting when the "Panic" mode is triggered, as well as at the time of disarming - the wire is connected to terminal 86 of the additional relay ";
• Black wire "weight" - connects to the negative terminal of the battery;
• The dark / green wire (-) of the hood (trunk) trigger, when shorted to ground, the system is instantly triggered, is extended to the hood (trunk) limit switches;
• Purple wire (+) of the door trigger - regardless of the number of doors, it is connected to only one limit switch;
• Purple wire (-) of the door trigger - as in the previous case, goes to the door switch;
• The yellow wire for monitoring the presence of power at the ignition switch is connected to the wire of the ignition switch, on which, when the key is turned, + 12V appears;
• Orange Starter Interlock Wire - Connects to terminal #86 of the auxiliary relay. At the same time, terminal # 85 is connected to the wire of the ignition switch, on which, at the time of starting the engine, a constant voltage of + 12V is created.

When installing the antenna wire, it is pulled out to its full length and installed in a place where it is difficult to damage it during the operation of the car.

Our instruction turned out to be quite universal, so it fits almost all modifications of pantera signaling devices. Below is a list of models that our guide will fit.

• Pantera SLK-250SC
• Pantera SLK-450SC
• Pantera SLK-400SC
• Pantera SLK-300SC
• Pantera SLK-675RS
• Pantera SLK-650RS
• Pantera CLK-350
• Pantera SLK-35 SC ver. 3
• Pantera XS-330
• Pantera SLR-5750
• Pantera SLR-5755
• Pantera QX-240
• Pantera QX-250
• Pantera QX-270
• Pantera QX-290
• Pantera XS-2000
• Pantera XS-2500
• Pantera XS-2600
• Pantera XS-3100
• Pantera SLK-868RS
• Pantera LX-320
• Pantera SLR-5625 BG
• Pantera SLR-5625RC
• Pantera CLK-650
• Pantera SLK-600RS
• Pantera CLC-200
• Pantera QX-250
• Pantera SLK-400SC
• Pantera SLK-350SC
• Pantera SLK-600 RS
• Pantera SLK-300SC
• Pantera CLC-180
• Pantera SLK-625RS
• Pantera SLR-5650
• Pantera CLK-375>
• Pantera CLK-455
• Pantera CLK-355
• Pantera CLK-500
• Pantera CLK-600
• Pantera XS-200
• Pantera XS-110
• Pantera XS-1500
• Pantera XS-1000
• Pantera SLK-7i
• Pantera SLK-5i
• Pantera SLK-3i
• Pantera SLK-2i
• Pantera SLK-85
• Pantera SLK-755 RS
• Pantera SLK-75
• Pantera SLK-25 SC ver. 3
• Pantera SLK-200SC
• Pantera SLK-20SC ver. 3
• Pantera SLK-500RS
• Pantera SLK-100SC

The device with which the control is carried out is a key fob. It has five buttons with which you can give commands. Communication is two-way. For issuance necessary information The key fob is equipped with a small LCD display.

In addition to the main key fob, the set also includes an additional key fob with four buttons. The radius at which two-way communication is provided is one thousand meters. If we talk about the distance at which an information signal can be transmitted, then we are talking about two thousand meters.

Main functions

Keychain "Panther" has a number of important functions to protect the car, but the functionality is not limited to them. In order to specifically imagine the possibilities, we will tell you in more detail about its functionality.

• Hours provided. Of course, in our time this does not surprise anyone, but we note that this function is supplemented by the presence of an alarm clock, as well as a countdown timer.
• The code provides protection against scanning and interception. As is known, modern technologies in some cases allow unauthorized access to the system, but in this case dynamic modification is provided program code, which gives elevated level protection in such situations.
• Arming function with disabled signaling to the main key fob. False alarm protection. On the one hand, this can somewhat reduce the degree of protection of the car when trying to steal it. On the other hand, there are cases of accidental operation from the weather ( heavy rain) or other similar effects on the vehicle. In any case, the driver can use it if he sees fit.
• The ability to transfer a call from inside the car to the owner's key fob. This may be important in the event that a passenger remains in the car and he wants to remind the driver of himself.
• Remote engine start. There are several different use cases here. There is a start on command. It also provides periodic start with shutdown. A regular interval of time after which the engine is started can be specified. It is possible to start depending on temperature changes.
• Some other features.

Contents of delivery

This system consists of several parts. After purchase, they must be carefully installed. If the driver has some skills in working with such equipment, then he can special work make the installation. If this seems too difficult, then it makes sense to contact the appropriate specialist. We list the main devices that make up the Panther.

• Main electronic unit.
• A keychain with a display and five control buttons.
• Additional keychain. There is no display on it and there are only three control buttons.
• The shock sensor is two-level.
• Siren for giving a loud sound signal.
• A relay that is designed to block the engine at the command of the security system.
• A special block with wires designed to install a blocking relay.
• LED indicator, along with its cable.
• Pushbutton switch for Valet operating mode. Sometimes the question may arise as to what this mode is intended for. The point here is to turn off some protective functions when it is necessary for the driver. Such a situation, for example, may arise during the washing of the car.
• The scope of delivery includes a limit switch.
• Wire kit.
• Instruction.
• Package.

As an example, we can say about the possibility of installing GPS sensors. Such additions will increase the level of safety for the car.

How the key fob works

Once upon a time, the very first models used static code. Due to the fact that it constantly retained its value, it was high probability hacking and, as a result, the ability to turn off the alarm when stolen. This level of security was clearly insufficient.

In the future, the creators began to use a much more secure dynamic code. The principle of its operation is that with each command given by the key fob, the access codes of both the key fob and the entire security system change.

Since this approach uses a different code each time, the likelihood of hacking has dropped dramatically. However, such a possibility still exists.

AT modern models the principle of operation of the key fob has been improved again. The dialogue model of code change is taken as a basis here. It is said that its formation occurs in three stages.

1. The key fob communicates with the security system.
2. Based on the received data, a special signal is sent to the key fob.
3. Taking into account the received information, the key fob makes changes in the codes of the security system.

This security system makes it virtually impossible to crack the system's access codes.

User manual

In order for everything to work correctly, you need to carry out competent installation and programming. The accompanying instructions should serve as the basis for this. Let's talk about it briefly.

The first section of the document briefly lists the main features. Then there is a list of functions that will need to be programmed. Here are some of them.

1. Automatic arming.
2. Locking doors when arming.
3. Locking the doors when the ignition is turned on.
4. Unlocking the doors in the same situation.
5. immobilizer mode.
6. False alarm protection.
7. Restarting the system in automatic mode.
8. A thirty-second delay to turn on the guard (we are talking about the fact that if you start the engine without disabling the protective mode, then after specified time siren will be activated).
9. And also some other features.

The following section describes how to give certain commands using various key fob button presses.

• Unlocking or locking doors.
• Turning on or off protection.
• Complete or partial shutdown of the shock sensor.
• Silent activation of the security system.
• Temporary cancellation of passive arming of the car.
• Enable or disable Panic mode. We are talking here about the short-term inclusion of chaotic sound and light signals for a short period of time.

The second part of the manual is followed by a detailed description with explanations for each issue discussed.

The programmable functions are considered in detail and it is described in detail how to configure them.

Ends instruction detailed description security system devices and the process of its installation.

What to do in case of malfunctions

As in any technical device sometimes malfunctions may occur. Let's consider several possible situations of this kind.

The range of the key fob is very important for the safety of the car. If it starts to decrease rapidly, then something needs to be done about it. In this case, the very probable cause is a dead battery. This is a possible, but not the only reason.

To security system recognized the key fob, it is necessary that she “remember” about him, remember his data. To correct this, it is necessary to carry out the key fob data initialization procedure, which is described in the instruction manual.

If the key fob stopped working with a discharged car battery, with a possible sudden impact electromagnetic field or due to very low temperature, then his work may change unpredictably first you need to make some attempts to fix this situation. For this it is necessary to carry out emergency turn-off and, having driven a certain distance, check the operation of the system. Sometimes repeated pressing of the key fob buttons can help.

If the malfunction continues to occur, then the next step is to disassemble the key fob. It needs to be untwisted and checked for dust and dirt and for the integrity of the contacts. It is also possible for liquid to enter the key fob. You need to clean it and check the health of the system.

If this kind of measures did not help, then it makes sense to contact a service workshop.

Security system programming

In order to properly set up security functions system, you need to program some of its functions. When buying a Panther, there are pre-set parameters described in the instruction manual. Perhaps this will suit you. If not, then you will need to enter the programming mode. Let's briefly describe how to do this.

• Initially, you need to turn off the security system and get into the car.
• Using the Valet button, additionally make sure that the security system is disabled.
• Enter your personal code to access programming mode. It is issued upon purchase of the system and can be entered only once.
• Start the car, turn off the ignition and press the Valet button as many times as the first digit of the security code. Try to keep within the allotted time. If the code consists of several digits, then you need to enter them, not forgetting the need to comply with a strict time schedule.
• After entering the program, you need to press the Valet button three times. After that, it should sound sound signal and the system indicator light should start flashing.
• After that, you need to turn on the ignition or do nothing for a while until a signal sounds (one short and one long beep). After that, the system will go into security mode.

Prices for keychain "Panther"

• Pantera SLR-5750 will cost 3100 rubles.
• Pantera SLR-5650 - also costs 3100 rubles.
• The Pantera SLR-5700 is somewhat cheaper. Its price will be 2590 rubles.
• Pantera SLR-5200 costs 2590 rubles.
• Pantera QX-290 will cost 2900 rubles.

Conclusion

The car security system "Panther" provides not only all the basic functions of car security, but also some additional ones. It can also be said that it is developing dynamically, improving the quality of the security system provided.

Each car owner tries to protect his vehicle from possible theft as much as possible. What tricks do not go to drivers to protect the car from the encroachments of unscrupulous people. Everything is in motion, from mechanical means protection like a variety of blockers and ending with tricky secrets that restrict movement vehicle.

Fortunately, most drivers rely heavily on car alarms. Little of, new models have improved encryption codes and additional features, which, for example, make it possible to start the engine at a distance.

What are Panther car alarms

One of the most sought after on the market are Pantera car alarms. These systems are rich functionality and high quality assemblies. In addition, they are easy to install.

Each driver is capable of installing a Panther car alarm on his car. All you need is a wiring diagram and a few hours of free time.

An interesting approach is the approach of the creators of Panther car alarms to their work. Specialists focus their products on a clearly defined segment of the global market. It is not surprising that devices for Russia have their own specifics and are valued by drivers precisely because they take into account our realities.

If we talk about pricing policy She is more than tolerant. Car alarm "Panther" can be purchased for 2000 rubles. Of course it won't top model, but its capabilities are more than enough to protect against car hacking budget class.

All car alarms "Panther" produced in East Asia. Despite this fact, the company's standardization policy is more than tough. The manufacturer is doing its best to adjust the production base to international standards.

Attention! On the this moment car alarms "Panther" meet the ISO 9000 standard.

It all started back in the 2000s. It was then that Panther car alarms appeared on the Russian market. The developers have tried to do everything possible to make their product as functional as possible. And they succeeded, anti-theft systems found their buyers, thereby starting the seizure Russian market.

Unlike their competitors, Panther car alarms were not focused on any one vector of development. On the contrary, manufacturers tried to do everything possible to make their devices universal.

An important role was played by the adaptation of Panther car alarms to the realities of the Russian market. This is the first brand that was officially recommended by AvtoVAZ for installation on their cars. Finally the drivers domestic cars were able to forget about constantly failing Western systems.

Unfortunately, European american models car alarms were simply not designed for domestic auto industry. The result was more than deplorable, many device functions did not work. In addition, constant failures and failures of all electronics have become a fairly common occurrence. The situation was saved by Panther car alarms, fully adapted for our market.

Modern car alarms "Panther" operate at a frequency of 868 MHz. This is quite enough to protect the signal from hackers. Moreover, this allowed to significantly increase the range of wave transmission. Also, this step allowed the system to more effectively deal with interference.

Types of car alarms Panther

All car alarms "Panther" can be conditionally divided into two types: bilateral and one-sided. The former are much more expensive, but allow you to monitor the condition of the vehicle in real time. Simply put, if someone throws a stone at your car or tries to pick the lock, you will know about it in the same second.

Bilateral alarms

Two-way Panther car alarms use an FM channel with 8192 bands. The result of the range extension is increased immunity to interference. In addition to everything, the devices use dual dialogue technology.

Important! Response time in two-way alarms"Panther" brought to 0.25 seconds.

Bilateral car alarms "Panther" have the ability to autorun. Now you can warm up the engine half an hour before the trip. Moreover, it is available to start the air conditioner and warm the air inside the cabin.

Automatic start in car alarms "Panther" helps to completely forget about the inconvenience associated with the need to warm up the engine in winter time. In addition, in the summer this function will also come in handy. Just need to run desired mode and inside the car it will become cool even on the hottest summer day.

Many Panther car alarms of this type equipped with timers. You can set the autostart time of the engine for each day, and you do not have to think about daily warm-up.

special attention deserves the ability to install a two-way alarm on cars with different types gearboxes. Even if your engine is started with a button, anti-theft system easily integrated into the overall onboard network.

Bilateral systems currently use the BACS Dialog SST code. It was created specifically for to resist electronic lock picks any level of difficulty, and so far he is doing well.

The range of systems operating at a frequency of 868 MHz exceeds one and a half thousand meters. If you switch the device to alert mode, the distance will increase to two and a half kilometers.

One-way systems

One-way systems are much simpler in design, which has a positive effect on the duration of their service life. Also, this fact lowers the price of the device.

One-way car alarms "Panther" are easy to use and very reliable. In addition, all modern security technologies are integrated into them, such as SuperKeeloq™ dynamic code. It is extremely difficult to crack it.

Also noteworthy is the Anti-HiJack mode and additional blocking of the engine in case of car theft. A useful innovation in Panther car alarms are sensors with two levels of sensitivity. Correct setting allows them to distinguish between a blow aimed at destruction and an accidental touch by a passing bystander.

Modern car alarms allow you to control many systems inside the car. For example, you can turn on the lights while being a kilometer away from the vehicle. This option can be very useful if you need to convince intruders that someone is in the car.

Important! Some models of car alarms "Panther" make it possible to control power windows.

Another significant advantage of car alarms "Panther" is central locking. It allows you to unlock and close the doors even on the way to the car. This feature can be very useful, especially when every minute counts.

Car alarms "Panther" have a number of programmable functions. You can add or remove them as needed. It is also possible to make adjustments to the work and fine-tune.

Important! It is worth noting that bilateral systems have most of these functions by default.

Systems instruction manual

The number of buttons on the key fob directly depends on the device model, but in any case, the control module will have the following keys:

• Button 1. Usually the first button has one channel and is responsible for several actions. In most cases, it locks the installation of the car on protection, the inclusion of the "Panic" mode and the control of door locks.
• Button 2. The key is responsible for silent arming and control additional modules.
• Button 3. Hold down button one and two at the same time. This will activate the Anti-HiJack mode or other programmable function.

Knowing the basic keys will allow you to easily control the car alarm. However, you will need a manual for fine tuning. The fact is that modern Panther alarms have about two dozen programmable functions, and it will take a lot of time to learn their features.

Highly important role in the operation of the car alarm "Panther" programming of transmitters plays. This process consists of the following steps:

1. Remove the guard.
2. Turn on the ignition.
3. Click Valet button three times.
4. Select the button that is convenient for you to control the first channel. The key must be pressed and held until a beep sounds.
5. The programming of the remaining buttons of the Panther car alarm key fob will occur automatically.

After programming is completed, you will need to correctly exit this mode. To do this, turn off the ignition and press the Valet button. Any other actions can be performed 15 seconds after reprogramming.

Results

The number of stolen cars is growing every day. In such a situation, taking care of the safety of your vehicle is a top priority. Car alarms "Panther" provide a decent level of protection for sane money.