To date, the tinting of winds of the car is very popular, even though the fines were tightened. In addition, it is a decoration, she also protects against sunlights in particularly hot days. But the process of toning itself is not quite cheap.

What should be done before the procedure

Many are asked about how to toned the car itself. This can be done easily, while saving money. Yes, and the ability to tint the car can come in handy in the future. In order for the result to be qualitative, should be guided by some rules. It is worth knowing that the film must be applied from the inside of the glass. Before toneding the car itself, it is necessary to overtake it into a well-lit and unwind. The procedure can be done without pulling out glass from the door itself. And yet: you should choose a certain type of film in advance.

What instruments need

In order to toned the car according to GOST, it is necessary to correctly pick up the entire required tool. It will require some devices. First of all, we are talking about the film itself. It can be bought almost in any car store. It comes on sale usually in rolls. Be sure to buy a rubber spatula. In the event that there is no such available, and plastic is borne. But it is worth understanding that they need to work as carefully, otherwise scratches will remain on the film. In addition, you will need a knife, a few dry and clean rags, detergent and spacing. In order to answer the question of how to toned the car itself in the event that the glass is curved, you will need a hairdryer. With it, folds and bubbles will be eliminated.

Procedure for applying tinting on glass

It is required to thoroughly wash all the windows of the car. All dirt and dust should be removed using detergent. It is also worth noting that if the toning is made on the door glasses, then the seals should be removed. Also before toneding the car itself, you should dial into the soap water sprier. It will be saved glass in front of the direct gluing film. Changing the film to the necessary size, it is required to apply on the glass. In the event that it does not work out exactly along the contour, it is best to do it with a small margin from which you should get rid of the procedure. Remember that everything must be done carefully. Sticking the film on the glass, it is necessary to smooth it well with a simple rag. Moicing the already applied toning from above, it is required to get rid of all bubbles and folds with a spatula. If there is an industrial hairdryer, you can dry the glass.

What you should know

So, how to toned the car? In addition to the fulfillment of all of the above recommendations, it is necessary to fully fulfill everything according to GOST. Otherwise, they will subsequently emerge the troubles that will not be able to add positive emotions.