The hood cable of a VAZ 2109 broke off. Emergency opening of hoods on a domestic car. The cable broke under the hood

Vaz 2109. The fact that the cable has broken is very easy to understand: when you pull the hood opening lever from the passenger compartment, you feel no effort and no sounds. The lever does not return to its place. The hood naturally does not open, since the lever pulls the retaining spring back with a cable.

Sooner or later, the hood of the VAZ 2109 will still have to be opened, but how to do it if pulling the lever from the passenger compartment does not open it. Naturally, no one wants to spoil the hood, and it must be opened without mechanical damage. This is done as follows: it is necessary to crawl under the hood from below and bend the retaining spring of the hood of the VAZ 2109.
It's just that you can't climb under the hood of the VAZ 2109, because protection is installed from below. This work is best done on a viewing pit or an overpass. Naturally, you can cope while lying under the car, on the flyover or inspection pit it will be more convenient, since it is not so easy to reach the VAZ 2109 hood spring from the bottom of the car.
The first thing to do is to remove the protection. It is better to remove all of its sheets so that it is more convenient to crawl.

They are removed simply - self-tapping screws are unscrewed and the sheets are easily removed. Now it is necessary to try to reach out with your hand to the retaining spring under the hood through the formed space.

It is better to illuminate yourself with a flashlight, since nothing will be visible and you will have to act by touch. It is necessary to bend the spring towards the battery. When the hood opens, you will hear a click, similar to that which is always heard when opening the hood from the passenger compartment. It will be easier to do this if someone presses down on the hood in the area of the lock from above. That's it, the hood of the VAZ 2109 is open, despite the torn cable.

How to open the hood of a VAZ 2109 (nines) with your own hands. For construction work, I got a Lada 2109 car for a while, already produced in 1987. Interesting car, it was on the move, the brakes and the engine worked, but everything else was broken or missing. If you drive it every day, it will start. With breaks for more than 3 days, I planted a new battery and started up with problems. The car continued to collapse and in my careful hands ... the muffler broke through, the driver's door opening stop broke off, and so on. Let's move on to the main thing - the hood. First, the cable for attaching the hood opening rod to the interior handle broke. This issue was resolved by using pliers to open the hood.

The hood had to be opened every time you start - turning on the mass, shamanism with carburetor flaps and topping up fluids. When opening with pliers for a torn cable, the hood did not always open, so I put more effort to open it. And just before leaving for the weekend, he began to prepare the car for a long parking lot, and of course, according to the “law of meanness,” he cut off the cable inside the hood. Honestly, up to this point ABSOLUTELY did not pay attention to the design of the hood lock. And now time is running out and I understand that if I do not turn off the power to the car, then in three days I will again have to run with the battery, but first it will be necessary to climb into the hood. Time passes, as always, for the answer - on the INTERNET. There are a lot of recommendations:
- on the lift, and there it is easy;
- crawl up from below and easily;
- lift the hood on one side and open it with a stick by pushing the spring;
- make a hook out of steel wire and open it by pulling the spring.
The most offensive, not a single photograph of the castle, for what to pull, where to stick. (Instruction manual, I threw this VAZ "Kama Sutra" when cleaning the trunk because of a very shabby and oily look). And I can't start the nine without opening the hood, 15 km to the nearest service, there is no jack and there is no one to ask and see how the lock works. He began to lift the hood on the left. He illuminated the inside of the hood with a flashlight. I saw a broken cable. On the recommendation, I put a stick (a pipe from a ski pole) into the slot in the hood and pushed the spring - DOES NOT OPEN. The number of pages viewed is already more than 30. Some recommend pressing the hood in the area of the lock at the moment of opening. Have tried it - IN ANY WAY. As time goes on, I decided to raise the hood on the left and conjure by throwing a hook or loop on the spring eyelet. All the materials at hand were used. Progress has come with the use of double copper wires in insulation. The formed loop and 20 minutes of attempts allowed the loop to be thrown on. To facilitate the work, a wooden spreader-piece was inserted under the hood; after the hinge was thrown, the chip must be removed. It was not possible to open the hood by simply pulling the spring towards itself, it was evident that the mechanism was skewed, but following the recommendations, after pressing the hood in the area of the lock (it is not necessary to press hard) and pulling an impromptu cable, it was possible to hear the coveted click. The hood was opened, measures were taken to "preserve" the car. The end of the cable is fixed in the spring eyelet, by compressing the eyelet, be careful not to break it, and also a strap from rubbish that has come to hand is additionally fixed to the cable. I hope the photos shown will help in opening the hood of this wonderful car. See the comments on the blog, there are many interesting things, leave your comments.

End of the cable Loop on

If, as it turned out, the lock cylinder has broken. He unscrewed the under-engine protection and opened the hood. Then, my friend came to the Vaz 2108 with the same problem and there were many such Lada owners with the same problem. Opening the hood of the VAZ 2109 is easier than on the 14th and 15th models, because they do not have plastic protection under the bumper. I will show, using the example of 2114, how to open the hood of a car if the cable breaks.

Lada 2114

And so, the situation: the cable broke, how to open the hood?

To do this, first of all, you need to remove the protection. If your car is equipped with massive shock-resistant protection, then its front two "ears" (or attachments) will be tightened by the two front crab bolts. (photo below).

If, however, a standard protection is installed on the machine, then it must be removed by unscrewing several self-tapping screws with an 8 key. As shown in the image below, four self-tapping screws from the front on the "TV", two self-tapping screws in the middle of the protection itself (it consists of two parts), as well as several self-tapping screws securing the protection to the side members.

After that, you need to reach the top panel of the "TV" with your hand and pull the cable eyelet to the left (where, in fact, its cable pulls). N

In the photo below, the red arrow indicates where to pull the lever. No effort is needed to unlock the lock. If, however, you pulled the cable and the hood still does not open, then you need to simultaneously pull the eyelet to the left and prop the hood up with your fist. You can do it with one hand. It is even easier if one person handles the lock and the other pulls the hood up.

If you are going to change the cable, then, after you remove the old one and take the new one out of the car, you will first need to pull the cable to the front eyelet and insert it into place.

How to open the hood on a VAZ 2109 if the cable breaks? This is a small, but still a problem. Especially when it's cold outside. Most often, it is in such weather that this problem happens. Another, more common, reason for the failure of the cable is its deterioration.

If the gap has occurred inside the cabin

A wire rope, or pull rod, is a single-strand or multi-stranded steel wire enclosed in a sheath, on top of which is a metal braid. Its main function is to open the bonnet by mechanical action on the handle of the lock. To solve the problem of how to open the hood of a VAZ, you need to take certain actions.

First, you should find the place where the cable broke. To this end, it is necessary to inspect the mechanism for opening the hood of a VAZ 2109 car or those places where access is still preserved. And you need to start by examining the handle of the lock.

The present mechanism includes a lock that holds the hood closed and a hook that prevents the hood from opening unintentionally. Their location is at the front of the bonnet. The handle of the lock is taken out into the salon and is located on the left under the dashboard. Having decided on the cliff, you can start the work itself.

Various options are possible here. If the cable breaks inside the passenger compartment, then, using pliers, you need to pull out its remnants from under the panel, grab the edge of the rod (core), but in no case by the sheath, and pull it hard enough towards you, that is, to the side salon.

Moreover, this should be done smoothly, without jerking. Otherwise, you can tear it elsewhere. In order to prevent the cable from falling out of the pliers, it is necessary to construct a loop at its end and thread it onto the tool. Maybe the hood will open.

The cable broke under the hood

The cable may have broken under the hood. In this case, the following algorithm of actions is proposed:

If possible, drive the VAZ 2109 onto a lift, overpass or inspection pit. Can be jacked up. At the same time, in case of failure of the jack, insure against falling of the car.
Carefully remove the engine crankcase guard, which is held in place by several self-tapping screws. Do the same with the tin boot to provide the necessary space for further manipulation.

Insert your hand into the opening between the radiator and the engine compartment. Feel for the ring where the rod is attached. It is not difficult, it is located directly next to the bonnet lock. Reach the ring from the bottom, pull or press to the left with force, towards the driver's door. If even then the hood of the VAZ 2109 does not open, then at the same time you also need to press on it from above. So, the ring will become malleable. A little effort and the hood is open. It is better if 2 people are involved in the process.
After that, you need to dismantle the old torn cable and install a new one. The work will be greatly simplified if one person pulls the spring at the lock, and the other takes care of fixing the cable on the handle of the locking device. First, you will have to knock hard on the body with the hood, but over time everything will be fine.

There are also other options for opening the hood.

Raise the hood of the VAZ 2109 and try to open its lock with a long wire.
Contact a car repair shop, where the hood will be opened professionally, efficiently and in a short time, the cable will be replaced, and the reason, if it is technical, will be identified and eliminated.
Look at the instructions for the VAZ 2109 car. As a rule, it indicates possible malfunctions and how to fix them. In extreme cases, it is advisable to at least familiarize yourself with the layout of the thrust.

In order for the cable to last longer, you must:

lubricate its outputs with lithol;
use a stranded cable, as it is strong, flexible, does not stretch and wears out slowly;
be very careful with the handle of the lock.

Do not consider the VAZ hood cable a trifle. This is a full-fledged part of a complex mechanism. Do not replace it with regular wire or even rope (such cases are known). It's not safe. Take care of your nerves and health, respect yourself and your car.

What to do if you find yourself in the following situation: the hood cable of the VAZ 2109 broke. The fact that the cable broke is very easy to understand: when you pull the hood opening lever from the passenger compartment, you feel no effort and no sounds. The lever does not return to its place. The hood naturally does not open, since the lever pulls the retaining spring back with a cable.

It is necessary to bend the retaining spring of the hood VAZ 2109

Sooner or later, the hood of the VAZ 2109 will still have to be opened, but how to do it if pulling the lever from the passenger compartment does not open it. Naturally, no one wants to spoil the hood, and it must be opened without mechanical damage. This is done as follows: it is necessary to crawl under the hood from below and bend the retaining spring of the hood of the VAZ 2109. You simply cannot climb under the hood of the VAZ 2109, because the protection is installed from below. This work is best done on a viewing pit or an overpass. Naturally, it is possible to cope while lying under the car, on an overpass or inspection pit it will be more convenient, since it is not so easy to reach the VAZ 2109 hood spring from the bottom of the car.

The first thing to do is to remove the protection. It is better to remove all of its sheets so that it is more convenient to crawl.

Engine protection VAZ 2109

We unscrew the self-tapping screws for the protection of the VAZ 2109

Place of attachment of the hood cable to the spring

Hood lock VAZ 2109

The cable now needs to be replaced. We buy a new cable and put it in place of the old one. We are convinced that the work is working properly, the lever in the cabin must regularly open the hood of the VAZ 2109. This method is very simple and does not require any tools and time consuming work. To main.

vaz2109.net

How can you open the hood on a VAZ 2109: if the cable breaks

The cable broke under the hood

Back to the table of contents

If the gap has occurred inside the cabin

Various options are possible here. If the cable breaks inside the passenger compartment, then, using pliers, you need to pull out its remnants from under the panel, grab the edge of the rod (core), but in no case by the sheath, and pull it hard enough towards you, that is, to the side salon.

Back to the table of contents

The cable broke under the hood

The cable may have broken under the hood. In this case, the following algorithm of actions is proposed:

If possible, drive the VAZ 2109 onto a lift, overpass or inspection pit. Can be jacked up. At the same time, in case of failure of the jack, insure against falling of the car.
Carefully remove the engine crankcase guard, which is held in place by several self-tapping screws. Do the same with the tin boot to provide the necessary space for further manipulation.

Insert your hand into the opening between the radiator and the engine compartment. Feel for the ring where the rod is attached. It is not difficult, it is located directly next to the bonnet lock. Reach the ring from the bottom, pull or press to the left with force, towards the driver's door. If even then the hood of the VAZ 2109 does not open, then at the same time you also need to press on it from above. So, the ring will become malleable. A little effort and the hood is open. It is better if 2 people are involved in the process.
After that, you need to dismantle the old torn cable and install a new one. The work will be greatly simplified if one person pulls the spring at the lock, and the other takes care of fixing the cable on the handle of the locking device. First, you will have to knock hard on the body with the hood, but over time everything will be fine.

There are also other options for opening the hood.

Raise the hood of the VAZ 2109 and try to open its lock with a long wire.
Contact a car repair shop, where the hood will be opened professionally, efficiently and in a short time, the cable will be replaced, and the reason, if it is technical, will be identified and eliminated.
Look at the instructions for the VAZ 2109 car. As a rule, it indicates possible malfunctions and how to fix them. In extreme cases, it is advisable to at least familiarize yourself with the layout of the thrust.

In order for the cable to last longer, you must:

lubricate its outputs with lithol;
use a stranded cable, as it is strong, flexible, does not stretch and wears out slowly;
be very careful with the handle of the lock.

Do not consider the VAZ hood cable a trifle. This is a full-fledged part of a complex mechanism. Do not replace it with regular wire or even rope (such cases are known). It's not safe. Take care of your nerves and health, respect yourself and your car.

expertVAZ.ru

How to open the hood of a VAZ-2109 with a torn cable

The VAZ-2109 car is full of surprises, so those who like to upgrade with their own hands in the garage of their beloved iron horse will like the car. There are many malfunctions during the active operation of the VAZ-2109, but there are also a lot of tuning options.

One of the breakdowns can be a break in the cable that opens the hood of the car. Until you correct this problem, the hood will be idle in the closed position. The cable breaks more often in cold weather, not withstanding low temperatures. Another reason for damage to its integrity is the deterioration of the part.

What to do if the cable breaks in the cabin

The cable that allows you to open and close an important part of the VAZ-2109 is a stranded or single-core wire made of steel, placed in a sheath, on top of it there is a metal braid. The main task of the cable is to open the hood when forces are applied to the handle of the lock.

To open the structure when the cable breaks inside the VAZ-2109, it is necessary to inspect and evaluate the area where the break occurred. Despite the breakdown, access to some parts and areas is likely to have survived and should be explored. Investigation of the condition of the parts near the hood begins with an inspection of the lock handle.

The mechanism for changing the position of the VAZ-2109 hood presupposes the arrangement of the structure with a lock and a hook, the latter acting as a fuse against unauthorized opening of the hood. The details are placed in its front part. The manufacturer brought the handle into the salon and built it on the left right under the dashboard. Seeing the place of the cliff, you can proceed to further work.

Experts note several ways to open the hood with a torn cable at once. A rush inside the passenger compartment allows you to solve the problem using pliers.

Using a tool, remove the remnants of a torn part from under the panel, try to grab the edge of the rod, but do not touch the sheath.

Using force, pull the edge of the rod towards you, but at the same time, keep it smooth, do not allow sudden jerks. Otherwise, there is a high risk of a cable break elsewhere. If you want to make sure that the cable does not fall out of the pliers, make a loop at the end of the part and thread it through the tool.

If the cable breaks under the hood of the VAZ-2109

There are times when the cable breaks at its location right under the hood. Then use the following step-by-step instructions:

You will need a lift, flyover or observation pit. If there is a jack, use it, having secured the car from falling from a height in advance.
With the machine at the top, start removing the protection that fits the engine crankcase, it is fixed with several fasteners. Do the same manipulations with a tin boot, this will help free up space for further actions to open the hood.
Place your palm in the hole between the radiator and the motor compartment. Feel with your fingers the ring in which the rod is fixed - the component is located near the lock device.
Reaching the ring, pull it towards you with an effort and push to the left, focusing on the door next to the driver. The hood should now open.
If the manipulations did not give a positive result, and the hood is still closed, also try to press on the ring, press it well. To make the process go faster, it is advisable to enlist the help of another person.
It remains to remove the torn cable and replace it with a new sample. The assistant must tighten the spring mechanism located at the lock, and the owner of the car at this time fixes the cable on the handle of the locking mechanism.

Alternative ways to open the hood of the VAZ-2109

Experts share additional ways to solve the problem with opening the hood of the VAZ-2109 due to a broken cable:

Raise the hood of the car and use a long wire to open the keyhole.
If you did not succeed in opening the hood with your own hands, you should contact a car repair shop, whose workers will do the job efficiently and quickly, besides, they will change the torn cable themselves.