The Starline B9 security system controls several areas of the car at once:

• limit pushbutton switches are responsible for opening the hood, trunk and doors;
• a two-level shock sensor captures mechanical impacts on the wheels, body and windows;
• voltage control sensor protects the ignition from unauthorized activation;
• conventional and digital Starline DDR relays control engine start;
• limit button switch fixes parking brake from shutdown.

The high level of protection of the Starline B9 signaling is ensured by the use of an interactive control code and a special coding algorithm that protects the system from interception and code selection. When the power is turned off, the car alarm remembers the last state and reproduces it when it is restored. If the car was armed, then when the external power is turned off, the engine remains blocked. The interruption of the alarm occurs without disarming the vehicle.

Anti-theft features

Alarm "Starline B9" has wide range functions, the most important of which are security:

Service functions

Car alarm "Starline B9" has a certain set of service functions. Separately, it is worth highlighting the security mode with the engine running, silent protection, silent activation of functions, work with the GPS / GSM module, panic mode, car search. All sensors are monitored by an alarm in automatic mode bypassing faults and alerting them when they occur.

The autostart function has been implemented in the Starline B9 device: the engine is started remotely from the remote control, by an alarm clock, temperature and timer every 2, 3, 4 and 24 hours. The system can also be configured to operate with diesel or gasoline engine, automatic or mechanical box gears.

Equipment

Car alarm "Starline" is supplied in the following kit:

• Complete installation kit including antenna, transceiver model, central control unit, cable kit, temperature sensor and car owner call button.
• The two-level shock sensor in the Starline B9 device detects both weak and strong shocks, while the system reacts by turning on either a full alarm or short beeps.
• Remote control panels. An ordinary key fob with three buttons without a display and feedback and a full-fledged control panel with feedback and a liquid crystal display.

• Temperature sensor installed in the engine.
• An LED mounted in the machine that acts as an indicator of operating modes.
• Emergency remote switch - a special button installed in the passenger compartment in such a way that it is always at hand for the driver.
• Instructions for the Starline B9 system and complete documentation.

Remote controls

Set car alarm"Starline B9" includes two key fobs - main and auxiliary. The main control panel is equipped with a liquid crystal display, feedback and three control keys. Current state security system displayed on the display through symbols and pictograms. The whole system is programmed using the main key fob. The display shows not only the alarm status, but also the current time, engine temperature, cabin temperature. The power source for the remote control is an AAA battery, which lasts for 6-9 months of active operation.

The additional key fob does not have a display and a feedback function. The keys control the same functions as the buttons on the main remote control. The operation of the key fob is accompanied LED indication. The additional key fob does not support the encoding algorithm, so it is best to use the main remote control. The power source is a battery that lasts for 9-12 months of operation.

Key fobs

On both control panels, the assignment of the keys is the same:

• Button 1: activation of the security mode, blocking of locks, control of shock sensors.
• Button 2: disarming, opening locks, disabling the alarm, monitoring additional sensors and activating / deactivating the anti-robbery mode.
• Button 3: determination of the system status, activation of the temperature indication mode, cursor selection of functions and an additional communication channel.

Benefits of a car alarm

The security system "Starline B9" compares favorably with similar car alarms. The scope of the complex is significantly expanded due to the possibility of connecting additional devices- ultrasonic, microwave sensors, pressure and tilt sensors. The relay type of the device circuit allows its installation in any place, which increases the level of vehicle security. The Starline DRRTM radio relay performs basic blocking.

According to the instructions for the Starline B9 device, the main unit of the system contains 7 control relays that control the ignition starter, electric locks, light and sound alerts, and other equipment. advantage and distinctive feature system is the possibility of remote control using GSM on a cell phone. To implement this function, you need to install an additional Starline Messenger module. In the event of a sensor or alarm being triggered, an SMS message is sent to the car owner's phone or a call is received.

According to the instructions, "Starline B9" is installed on cars with voltage onboard network at 12 V. It is desirable to install the central unit of the system in a hard-to-reach place, for example, under the dashboard, which facilitates cable routing. The antenna and transmitter module are mounted on the windshield, which allows you to maximize the range of other transmitters. The temperature meter in the cabin is located in the module, so it must be placed taking into account this feature.

The Valet service button is placed in an accessible but hidden place. It is used in emergency cases, so it is advisable to clean it in places that do not have quick and free access. If the car is left at the service station, it is recommended to turn on the Valet mode: when it is activated, some of the alarm functions are turned off, so the service workers do not need to transfer key fobs.

The Starline B9 alarm, at a low price and ease of use, allows for automatic engine start and has a two-way communication channel. It is produced at factories in Taiwan and sold on the Russian market by NPO StarLine LLC. The Starline B9 instruction will help you understand the functions and settings of the alarm.

[ Hide ]

Options and prices

The Starline B9 Dialog system is supplied as a kit, which includes:

• main unit with a central processor;
• double-sided remote control with liquid crystal display;
• battery for the key fob (battery 1.5 V size AAA);
• additional double-sided keychain without display;
• antenna module used to connect the main unit and control fobs;
• leather case designed for the main key fob;
• wiring harnesses for connecting alarm components;
• wire with a button for setting operating modes (Valet);
• adjustable shock sensor;
• motor temperature sensor;
• LED to determine the state of the system;
• limit switch for the hood;
• installation and operating instructions with electric circuit connections;
• warranty card.

Starline B9 Dialog kit in factory packaging

Currently, the model has been discontinued and the A91 system is offered instead, which has a similar configuration and characteristics. Despite this, there are still alarm kits on sale from the remnants of warehouse stocks. The cost of security complex StarLine B9 twage at the beginning of 2019 is about 2600 rubles. The price of an additional key fob B9 W809 ranges from 620 (for a regular one) to 1000 rubles (a device with a screen).

Main functions

Alarm Starline B9 can provide protection for several areas of the car:

1. protection electrical circuits power unit, which is carried out using an alarm relay. Separately, protection of the ignition circuit is provided (by the appearance of voltage at the contacts in the ignition switch).
2. Protection of doors, hood and trunk lids (using standard or additional limit switches).
3. Handbrake lever (by operation of the standard switch when the lever is lowered).
4. Salon body (on a signal from the shock sensor).

To expand the capabilities of the B9 signaling, it is possible to install additional blocks:

1. Starline M21, which allows you to control functions with mobile phone. This feature is very useful when parking a car at a long distance, which is not finished off by the standard key fob signal.
2. Starline M31, which, in addition to controlling by phone, allows you to monitor the position of the car according to the data of cell towers or according to the indicators of GLONASS and GPS satellites.

Anti-theft

The system has the usual functions for devices of this kind:

• activation of the alarm mode when receiving a signal from sensors;
• notification of the owner about the operation using the communication channel with the key fob;
• the ability to work in immobilizer mode;
• programmable two-stage shutdown;
• the possibility of introducing a block into the memory special code, used to deactivate the system in emergency situations;
• the activated alarm blocks the engine operation circuits and saves this setting in memory;
• the possibility of silent activation of the security mode;
• Silent operation of the system (with indication of alarms using outdoor lamps).

To provide advanced degree security in Starline B9 apply:

• floating control code, which has additional protection from being captured by a code grabber;
• when the power is removed, the system remembers the current setting and returns to this state when the power supply circuits are connected;
• a limited number of consecutive triggers according to data from the sensor;
• the ability to turn off the alarm indication (light and sound) without deactivating the system.

Service

The main auxiliary functions of the system:

• preservation of security functionality when the engine is on;
• the possibility of setting and removing without a remote control;
• automatic resumption of the state of protection in case of accidental disconnection;
• the ability to remotely control the operation of sensors, as well as door locks;
• door lock control through the ignition lock;
• opening door locks in two stages;
• four additional channels used to control additional equipment;
• the ability to search for a car in the parking lot;
• configurable protection against possible clicks on keyfob buttons;
• customizable autorun and turbo timer modes;
• visual indication of the reasons for triggering the alarm;
• additional sound notification of triggered events;
• indication of malfunctions when the security mode is turned on.

In addition, there are the following options for remote activation of the power unit:

• start and stop directly from the key fob;
• extension of the operating mode from the key fob;
• start according to data from the temperature sensor on the engine, by timer (at certain intervals) or by an alarm clock;
• monitoring the operation of the engine by signals from the speed sensor or by voltage in the on-board network;
• automatic shutdown of the starter after starting;
• informing the user about the operating time through the indication on the key fob screen.

Key fobs

The alarm system performs all operations either in accordance with the programmed program or by commands from the remote controls.

The kit comes with two devices:

• the main one, which has a display and three buttons;
• reserve, equipped with three buttons.

When working with buttons, the following presses are possible:

• short-term impact on one button - pressing time is not more than 0.5 seconds;
• long exposure, which is performed before the key fob sound signal is turned on;
• double impact on one button - two presses for a period of not more than 0.5 seconds;
• sequential activation of two buttons (provides for a long action on the first and a short one on the second).

For proper management functions, the owner of the car alarm should know the purpose of the buttons.

Purpose of button 1 on the main key fob:

• can be used for standard activation of the system (single short), and when the engine is on and the key is in the lock, it turns on the blocking of door locks;
• double short press turns on the system without sound by means of a siren;
• adjustment of settings and adjustment of parameters for the operation of the shock sensor (by double exposure).

Button 2 can be used for the following purposes:

• for standard disarming - single short press;
• when the engine is running, pressing the button opens all door locks;
• for silent shooting mode - the button should be pressed twice for a short time;
• to manage additional components;
• when the anti-robbery mode is activated;
• when the siren is working, it is turned off by a single press of button 2.

Button 3 is used to activate additional functions:

1. A single short press allows you to display the temperature in the cabin and check general state security system.
2. Double press is used to search for a car in a parking lot or view the current engine temperature.
3. Connecting an additional communication channel.
4. Selection of operation parameters during the cursor setting of the alarm. An example would be to include auto start on various parameters, activating turbo timer modes or automatic setting for protection.
5. View the current time, an alarm clock, activate the battery saver mode or control the built-in vibrating alert (silent key fob operation).

An additional key fob provides limited alarm functionality:

• turning on the system - by a single short press on button 1;
• disarming the car - short press button 2;
• activation of the anti-robbery mode - by long pressing the button 2.

More detailed combinations of pressing the buttons are described in the user manual.

Remote controls

When controlling the operation of the alarm system from a backup key fob, a signal about changes in the operation mode is sent to the main key fob and displayed as icons on the screen and sound notifications. In addition, in the design of the main key fob, it is possible to set an alarm clock, the current time and view the temperature in the cabin and engine compartment car.

Key rings Starline B9

Icons of the main operating modes of the security system are displayed on the screen of the main key fob. In case of loss or need to use an additional key fob, it must be registered in the control unit. Starline B9 can store the parameters of four key fobs in memory. Registration of key fobs is possible only in the service mode of the system.

Pros and cons

Users refer to the advantages of the alarm:

• low cost;
• reliability and ease of use;
• the presence of an autorun system;
• large range of the key fob (provided there are no sources of radio interference).

Along with this, the following points are criticized:

• lack of standard siren;
• low noise immunity, due to which the signal from the key fob is lost in parking lots in large cities;
• for some owners, the sensitivity of the main key fob decreases over time, which ceases to see the car;
• spontaneous reset of the clock or alarm may occur;
• there is a hang of the main key fob, which is corrected by removing the battery;
• a small range of starter operation time, which makes autostart difficult at temperatures below minus 25 °C.

Some of the listed disadvantages are not found in all devices, so the reason negative reviews there may be unstable production quality or unscrupulous installation and configuration. In addition, alarms are often installed that are purchased directly from China and have an identical B9 appearance, but labeled StarLionr Twage.

How to install

When installing an alarm in a service or with your own hands, you should follow the general rules:

• all work must be carried out on a car with a disconnected battery;
• the main signaling unit is located in the depth of the instrument panel, which reduces the length of the connecting wiring;
• when installing the unit, it is necessary to exclude the ingress of liquids on it;
• the main unit should be located as far as possible from the heating system, since it has a temperature sensor in the cabin;
• receiver with antenna mounted on windshield(for hidden installation, the antenna must be located at a distance of at least 50 mm from the metal parts of the body);
• the siren is installed under the hood in a place that must be isolated from overheating or flooding with water;
• the shock sensor is tightly mounted in the cabin;
• the engine temperature sensor is installed on the engine crankcase;
• the operation indicator is mounted on the instrument panel or facings of the front pillars;
• the service button should be located in an inconspicuous place, but access to it should be unhindered;
• limit switches must be installed with a gap of 3 mm, which ensures correct operation;
• alarm wiring should be located at the maximum distance from sources of interference.

Self-installation of the Starline B9 alarm can only be recommended to people with similar experience. It is much easier and more reliable to contact a specialized service, whose employees will correctly install and configure the system.

A brief sequence of installation steps is as follows:

1. Install the main unit.
2. Install a receiver with an antenna and a shock sensor in the cabin.
3. Place a siren and engine temperature sensor under the hood.
4. Install the signal LED and the Valet button.
5. Install all necessary limit switches and relays.
6. Connect the components with wiring harnesses in accordance with the instructions.
7. After the connection is completed, start the engine to learn the signaling parameters of the generator (required for autostart).

After the connection is completed, you can configure the system operation using the programming tables from Starline instructions B9.

How to setup

The operation parameters are set using the service mode.

For this you need:

1. Press the Valet mode button the required number of times (select according to the table depending on the function).
2. Activate the ignition and wait for the sound confirmation from the siren to enter the setting.
3. Select the desired function with the service button (its number corresponds to the number of clicks).
4. Confirm the choice with the button on the key fob (according to the data from the tables).

In the event of a malfunction, the alarm can be reset to factory settings:

1. Press the service key ten times.
2. Turn on the ignition, after which the siren will sound ten times shortly.
3. Press the button again.
4. Wait for the siren signal.
5. Press button 1 on the key fob.
6. The system has been reset.

Incorrect settings can lead to incorrect operation of the complex as a whole. The need for proper configuration is another incentive to install a security system in a car service.

Download instructions for installation and operation of the Starline alarm in PDF format

The service manual, which will allow you to use and configure the alarm, can be downloaded from the link.

Before starting the engine with the key fob or
activate automatic engine starts in
it is strongly recommended to familiarize yourself with
the following features of the launch functions
engine:

Preparing to run on cars
with manual transmission

Before starting the engine on vehicles with manual transmission
it is necessary to perform the “software neutral” procedure.
Software neutral is a certain course of action
driver, who guarantees that in the car,
prepared for launch, shift knob
will remain in neutral position. Accordingly, launch
engine with the gear engaged will not be possible.

Software neutral depending on the state
programmable function 12, table 2 can be executed
in two versions, automatic or controlled by a key fob.

Enabling "software neutral"
Automatic option - auto alarm system B9 Dialog

Enable "software neutral".
Keychain control option.

Engine ready to start

Remote engine start with
using the key fob of the Starline B9 Dialog car security system

Before turning on the mode, make sure that the hood is closed. For
car with manual box procedure completed
"software neutral". For vehicles with automatic
control lever in the “PARK” position.

In one startup cycle, the system can make 4 attempts
engine start. If after the 4th attempt the engine does not
starts, then on the display of the key fob with feedback (when
provided that it is in the reception area), the inscription will be displayed
SP, and the keyfob will give 4 beeps, indicating the end
attempts to start the engine. 4 flashes of dimensions will follow.

1 minute before the end of engine warm-up is displayed
the inscription r01 and 2 series of 4 key fob beeps will sound.

After the end of the engine warm-up time and its
auto stop, 4 flashes of dimensions will appear. On the
key fob display icon r00 will be displayed, 4 beeps will sound
key fob signal.

Remote extension
engine operation

Automatic engine starts

Automatic engine start by alarm
(activated from key fob)

Note

1. The presence of a key fob in the coverage area of ​​the transceiver at the moment
   auto start of the engine by an alarm clock is not required.
2. Engine start time may differ from programmed
   alarm time within 1 minute.
3. The autostart function is enabled for one startup cycle. For a new start
   engine, you must re-activate the function from the key fob each time.

Programming and setting up a car security system can be done after installing a car alarm at Phasis Orbita Service.

Automatic engine start by timer
(activated from key fob)

Automatic engine start based on temperature
(activated from key fob)

Car alarm allows you to automatically start the engine upon registration
external temperature sensor mounted on the engine, temperatures
below the programmed -5°C, -10°C, -18°C or -25°C (function 2.4). Time
engine warm-up is determined by the programmed function 2.2.
The car security system monitors the sensor readings immediately from the moment of activation
functions. The minimum interval between repeated autoruns,
counted from the moment of the previous start, excluding warm-up time
engine - 1 hour. After activating the temperature start function
the number of engine autostarts is not limited by temperature.

Starline

Installation of car alarms StarLine A2
Installation of car alarms StarLine A4
Installation of car alarms StarLine A6
Installation of car alarms StarLine A8
Installation of car alarms StarLine A9
Installation of car alarms StarLine B6
Installation of car alarms StarLine B6 Dialog
Installation of car alarms StarLine B6 Dialog CAN F5 V100
Installation of car alarms StarLine B6 Dialog CAN F5 V200
Installation of car alarms StarLine B62 Dialog Flex
Installation of car alarms StarLine B9
Installation of car alarms StarLine B9 Dialog
Installation instructions ( Specifications and equipment)
Recommendations for placement, installation and connection
Connecting various circuits
Service function programming
Description of programmable functions
Programming engine start parameters
Description of programmable trigger functions
Engine starting
Recording keyfob codes
Command tables and key fob batteries
Operating instructions (Security and service functions of the alarm system)
Car alarm control keyfobs
Setting the functions of the alarm key fob
Programming operating modes using the cursor method
Activation of alarm security modes
Control and self-diagnosis of car alarms
Alarms
Power failure protection
Immobilizer mode
Anti-robbery mode
Turbo timer mode
Sensors
Channel management
Starting the car engine
Installation of car alarms StarLine B9 Dialog CAN F5 V100
Installation of car alarms StarLine B9 Dialog CAN F5 V200
Installation of car alarms StarLine B92 Dialog Flex
Installation of car alarms StarLine B94 Dialog
Installation of car alarms StarLine С4
Installation of car alarms StarLine С6
Installation of car alarms StarLine С9
Installation of car alarms StarLine 24V
Installation of motor alarm StarLine Moto V5, alarms for motorcycles

The Starline B9 manual includes installation recommendations, as well as the diagrams necessary for the correct connection of the alarm. This manual is useful both for car service workers and for self-installation of the system in a garage environment.

[ Hide ]

Specifications

Car "signaling" Starline B9 has the function of automatic remote start engine, as well as alert and feedback options. This means the possibility of remote monitoring of the state of the main parameters of the vehicle.

Properties possessed by the Starline security system:

• packet data transmission between the microprocessor module and the keyfob is carried out via a channel with a frequency of 433 MHz;
• the greatest range of the communicator in the mode of operation of the transmitter is six hundred meters;
• the range of the device when working as a pager is about 1200 m;
• the range of the spare key fob is approximately 15 meters;
• the system is equipped with a sensitivity controller, which belongs to the category of piezoelectric;
• operating temperature range - from -40 to +85 degrees Celsius;
• to power a car alarm, a voltage of 9 to 18 volts is required;
• when the protection mode is on, the current consumption of the system is no more than 15 mA.

Equipment

Description of parts and devices that are included in the delivery of the Starline B9 Twage model:

1. A microprocessor device that performs the functions of a control unit.
2. Instructions for use and installation. The Starline B9 instructions indicate all the nuances for correct installation and wire connections.
3. Warranty card.
4. The main communicator with a feedback option and a notification function for the car owner. Complete with screen.
5. Power supply for installation in the main pager. It accepts AAA batteries rated at 1.5 volts.
6. Spare two-way communicator. Despite the lack of a screen, the device has a feedback function.
7. A transceiver module designed to provide contact between the consoles and the control unit.
8. Protective cover for the main communicator.
9. A set of wires with which the system installed on the car will be connected.
10. Key for activating the service mode with a wire for connection.
11. Customizable sensitivity controller.
12. Temperature sensor designed to measure the temperature of the engine.
13. Diode lamp for signaling status.
14. Limit switch for mounting on the hood.

The alarm package does not include a siren, so regular playback of alarm signals will be impossible, this device is purchased separately.

Photo gallery

Photo of alarm elements:

Complete set of alarms System control module Antenna adapter

Key Features

When using the system, the security complex protects the following zones:

1. Car engine wiring. For this, a special car alarm relay is used.
2. Power lines connected to the lock and other elements of the ignition system.
3. Locks for doors, hood and luggage compartment. To do this, you need to install and connect limit switches. The kit includes only one switch, for mounting on the hood. Luggage compartment and door lock devices must be purchased separately.
4. Hand brake lever. For this, a standard sensor is used.
5. Salon. A sensitivity sensor is used.

The main protective functions of the alarm:

• protection of the car with the engine running;
• automatic activation of protection upon receipt of signals from sensors;
• warning the user about turning on the security complex when using the communication channel with the remote control;
• the ability to work anti-theft system as an immobilizer;
• adjustable two-step disarming;
• use of a service pin code required to control and shut down the system in emergency mode;
• blocking the electrical circuits of the motor and storing this information;
• keeping the engine blocked when the power is turned off;
• silent activation of protection mode;
• the option of silent protection, in which the activation of the alarm mode is not accompanied by signals from the siren;
• floating encoding, characterized by increased protection against scanners and code grabbers;
• a limited number of consecutive inclusions according to information received from sensors;
• disabling the alarm mode without turning off the car protection system.

For greater ease of use, the system has additional service options:

• turning on and off the security system by means of service button, without using a key fob;
• restoration of the protective function when the security complex is turned off;
• programming of the main parameters and characteristics of sensors and door locks;
• option to control additional blocking of locks in the doors when using the ignition lock;
• the use of additional four channels that are necessary to control additional equipment and devices;
• car search function in the parking lot;
• the presence of a blocking of the remote control buttons, which allows you to prevent accidental pressing;
• auto start of the engine and turbo timer;
• light indication of the reasons for switching on security function;
• sound notification of the car owner about the events that have occurred;
• the ability to determine problems when the protection is turned on - the function of self-diagnosis of the alarm.

The consumer can expand the alarm functionality by installing additional GPS / GSM modules from the Starline manufacturer.

Satellite and mobile tracking devices will allow you to determine the coordinates of the car, which can be useful when it is stolen. Control additional modules made through the use of mobile communications. To do this, the appropriate software must be installed on the user's phone in advance.

The AndreuAZTV channel spoke in detail about the main features of this car alarm model.

How to install with your own hands?

Wiring diagram for 18-pin connector

If the controllers are connected incorrectly, this will lead to false alarms.

Connecting the 4-pin connectors of the shock sensor and additional sensor

To implement the automatic start of the internal combustion engine (engine internal combustion) it is necessary to make the correct connection of the relay. The designation of all cables on the connector is shown on the map.

Wiring diagram for the 6-pin autorun connector

User manual

The service documentation will allow you to perform the initial configuration of the alarm parameters.

Key fob

Before setting up the communicator, you need to make sure that the alarm is set correctly. To do this, you need to try to close and open the doors.

Meaning of buttons

Designation of keys on the main and additional consoles

Description of the first button of the key fob:

• is used to activate the security function when the engine is turned off, for this the key is pressed briefly, for half a second;
• with the power unit running, a short click on the button will block the engine;
• double pressing this key will arm the guard without sound;
• if you press the button twice, each for a few seconds, the system will enter the menu for changing the sensitivity and programming the shock sensor.

The second button is for the following options:

• a short press disables the security function;
• it is possible to turn off the blocking of door locks if the alarm was activated with the engine running;
• double long press on the button will activate the silent protection mode;
• control of additional electrical equipment and devices;
• activation of the anti-robbery function;
• disabling the alarm mode.

Button number 3 is used to control the following options:

1. A short press will display temperature information on the keyfob screen. The display should also show data on the state of the anti-theft system.
2. Double pressing will enable the standard function of finding a vehicle in the parking lot. The key can be used to display information about the current temperature of the car engine.
3. Adjustment of the parameters of the additional communication channel.
4. Setting the device in a cursor way will allow you to use the button to change the operation parameters. You can change the timer to automatically start the motor.
5. The key is used to view the online time, alarm data and the battery saving option in the remote control. Using the button will allow you to control the vibrating call.

Display indicators

Meaning of indicators on the screen

Description of icons on the communicator display:

1. The automatic start of the motor by an alarm clock is activated.
2. Automatic start of the engine on the timer.
3. Automatic start of the power unit according to the readings of the temperature sensor.
4. Vehicle emergency service mode is on.
5. The engine turbo timer is enabled or disabled.
6. Option to automatically activate protection mode.
7. Engine blocking mode is enabled or disabled.
8. The key lock function on the key fob is activated.
9. Battery charge indicator.
10. Temperature indicator in the passenger compartment of the car or engine.
11. Anti-hijack mode launched.
12. Icon in the form exhaust gases reports the operation of the engine.
13. Connected optional equipment in the form of a search and security module.
14. Bypass indicator of the first level of the sensitivity controller.
15. Bypass icon for two levels of shock controller.
16. One of the open doors car, hood or luggage compartment.
17. Current time.
18. Alarm option activated.
19. Countdown timer enabled.
20. The icon for defining two-way communication between the antenna and the key fob.
21. Open door indicator.
22. Crossed out loudspeaker - the silent protection mode is on.
23. Locked door locks icon.
24. The emergency deactivation of the alarm with a password is active.
25. Manual transmission mode activated.

Powering key fobs and replacing batteries

Before using the communicator, the user must install working batteries in the device. Power supplies are mounted in a special socket located behind the rear protective cover. To do this, it must first be removed. When installing, observe the polarity of the batteries.

Writing codes

Programming new keychain need as follows:

1. With the ignition off in the car, the call button is pressed three times emergency mode. If the alarm was installed by specialists, you need to find this button or check with them. To search, you can view all the wires coming from the microprocessor module. A key is connected to one of them. Usually it is located under the instrument cluster.
2. Then the key in the ignition switch must be turned and set to the “On” position. The car siren will give sound signal, which indicates entering the programming menu for new remotes.
3. The next step will be direct binding. On the main remote control, the first and second buttons are pressed simultaneously. If the microprocessor module has successfully bound the key fob, the siren will beep.
4. The same actions must be performed to bind other communicators. If they are programmed at once, all devices must be prepared in advance. When binding, the interval between recording communicators should be no more than 5 seconds.
5. Then the key in the lock scrolls to the “Off” position. The headlights of the car should work several times, the security system will leave the key fobs binding menu.

User Leonid Akimtsev clearly showed how the procedure for binding a new Starline B9 alarm communicator is performed.

Programming security and service functions

The function itself is configured by selecting one of the four status options.

Settings options:

Custom option	Short press on the 1st key	Short press on the 2nd button	Short "click" on the 3rd key	One long and short press on the 1st button
	1 impulse	2 impulses	3 impulses	4 impulses
Duration of door lock control signals	1 option	Option 2	3 option	4 option
Automatic Door Lock Mode	1 option	Option 2	3 option	4 option
Controller turn-on delay when protection is activated	60 seconds	5 second	30 seconds	45 seconds
Automatic activation of protection, as well as an algorithm for processing impulses of an additional controller	With door locks closed	With door locks closed	Without door locks	Without door locks
			Two-level additional controller	One-level additional regulator
Switching protection mode in automatic mode	With door locks closed	Without locks	Off	Off
Algorithm and duration of sound output	To siren 100 ms	To siren 50 ms	On the steering horn 50 ms	On the steering horn 20 ms
Light indication of open doors	10 Seconds	20 seconds	30 seconds	Off
Setting the operation of the blocking outputs when the anti-robbery function is activated	When the brake pedal is activated	When the alarm mode is turned on	Off	Off
Function of the emergency deactivation of the anti-theft system	No password	Single digit password	Two-digit password	Three-digit password
Turning on the outputs for blocking the power unit	Off	Activated	Activated	Activated
Algorithm of the fourth additional channel, blue cable	1 option	1 option	Option 2	Option 2
Algorithm of the first additional channel, black-yellow contact	1 option	Option 2	3 option	4 option
Algorithm of the second additional channel, red-yellow contact	1 option	Option 2	3 option	4 option
Algorithm of the third additional channel, white-yellow contact	1 option	Option 2	3 option	4 option

Anti-theft features

Features of setting anti-theft options:

1. To turn on the engine blocking, you need to press and hold the third button on the key fob. The remote control should emit first a long and then a short beep. By briefly pressing the third key, the Auto Immo option is set. After selecting a function, the first button is pressed. To disable this mode, use the key number 2.
2. To activate the anti-robbery function, the ignition must be turned on, switching on is done by holding the first and second buttons. If the option is enabled, the alarm will emit an audible signal. The blocking of the power unit will occur when the brake is pressed or during other events programmed earlier. To disable this mode, button 2 is pressed twice at two second intervals.
3. Passive activation of the anti-robbery mode is carried out in three stages. On the first one, you need to enable the standby option, for this, with the ignition activated Danger button"Jack" presses once. Then, by opening the door, you can see that the diode lamp will start blinking frequently, when they are subsequently closed, preparations will be made for the implementation of the option. At the third stage, the anti-robbery function is turned on after 30 seconds.

Engine starting

Before a task vehicle must be prepared by setting the program neutral option if the car is equipped with a manual transmission (manual gearbox):

1. The machine with the running power unit stops, the transmission selector is set to the neutral speed position. You also need to pull the handbrake lever.
2. Then the ignition is turned off in the car. The key is removed from the lock, the motor must remain in working order.
3. The driver gets out of the car and locks all the doors with the key. The machine is prepared to implement the autorun option.

Feature Features

When setting the option, you need to consider the following nuances:

1. The type of transmission, power unit must first be configured.
2. Autostart of the engine will not be possible with the ignition on, the engine compartment open, the hand brake turned off, and the brake pedal pressed.
3. In one cycle, the alarm can make no more than four attempts to start the motor. If the engine fails to start, the user will be warned about this by receiving a message on the talkback console. The headlights of the car will blink four times.
4. The time of the first scrolling of the starter mechanism is configurable by the user. It can be from 0.8 to 3.6 seconds. With each subsequent attempt to start, the alarm will automatically increase the cranking time of the starter mechanism by 0.2 seconds.
5. If the engine, after a successful start, automatically turns off for no reason, the anti-theft system will make an early attempt to start it.

remote start

To start the vehicle's power unit on command, the first and third keys of the communicator are used. Pressing button 1 should be longer, and pressing button 3 should be short. If after these manipulations the engine starts, the headlights of the car will flash three times, and the key fob will play one signal. To disable this function, similar actions are performed, only the second key is pressed instead of the first button. When the engine is stopped, the lighting devices should work 4 times, and the indicator in the form of smoke from the silencer will disappear from the communicator display.

Powertrain remote start options:

• the ability to activate this function by a command sent by the user from the remote control;
• extending the operating time of the power unit from the communicator;
• starting the car engine according to the ambient temperature, after a certain time period or at a user-configured time;
• the ability to control the operation of the machine's motor according to the readings of the tachometer or the voltage level controller in the vehicle's on-board network;
• disabling the starter device after a successful start of the power unit;
• notification of the user about how much time is left for the engine to work, for this an indication system is used on the key fob display.

User Stanislav Tarasov spoke about the operation of the autorun function, as well as the implementation of other options.

autorun

Automatic start of the internal combustion engine can be carried out according to three parameters:

• at the specified time;
• by timer;
• according to air temperature.

By alarm clock

The option is configured as follows:

1. To activate the function, you first need to make sure that the time parameters are set correctly. If necessary, change the alarm clock. Enabling this option will be indicated by the appearance of an indicator in the form of a bell on the display.
2. If the current time is set correctly, then the first and second keys on the communicator are pressed. The cursor on the device screen will move to the clock indicator. This option is enabled.
3. To turn off the function later, the cursor on the screen moves to the position of the clock icon. The second key is used to disable.

By timer

The timer can be set to fire every 2, 3, 4 or 24 hours, to customize given parameter the first and third buttons are used:

1. On the keyfob display, the cursor must be moved to the position of the timer indicator, and then the function must be activated.
2. The remote control will emit a melodic signal, the car will work once. The corresponding indicator will light up on the communicator screen, indicating that the function has been activated.
3. To disable the option, the cursor is placed in a similar position on the screen and the second button on the remote control is pressed.

By temperature

To configure, follow these steps:

1. The function is activated by moving the cursor over the thermometer icon on the remote control. Use the buttons to enable the option. parking lights the car will blink once, an indicator with the temperature level at which the engine will start will appear on the screen.
2. The second key of the communicator is pressed. The side lights of the car will blink.

Programming engine start parameters

Detailed description of the settings for implementing this function:

Programmable function	Single press on key 1	Single "click" on the second button	Short press on key 3	Long and short "click" on button 1
	1 impulse	2 impulses	3 impulses	4 impulses
The duration of the turbo timer of the power unit	Turned off	1 minute	3 min	6 min
The duration of the car engine after remote start	10 min	20 minutes	30 minutes	Time limit disabled
Time intervals for periodic start of the engine by timer	2 h	3 h	4 h	24 hours
Remote start of the motor by ambient temperature	-5 degrees	-10 degrees	-20 degrees	-30 degrees
Remote engine start option	With the inclusion of security and the closing of door locks	Without arming and locking doors		Without activation of the protection and closing of the doors
Exit work algorithm	Duplication of additional devices and devices 2 seconds before the ignition is turned on	Duplication of ignition	Duplication of the starter device	One signal
Starter crank duration	0.8 sec	1.2 sec	2 sec	3.6 sec
Car engine type	Gasoline with 2 second delay	Diesel, delay is 5 seconds	Diesel fuel with a delay of 10 seconds	Diesel, delay 20 sec
Control of engine operation by settings	Voltage	Generator, its positive contact	On the negative contact of the generator device	Tachometer
Activation of the ignition support function when the engine is running	Automatically	On command from the key fob	Engaging the handbrake lever	Turned off
Turning off the ignition output when cranking the starter	Included	Included	Included	Included

Download instructions for installation and operation of the Starline B9 car alarm in PDF format

You can download the service manuals from the links below:

Advantages and disadvantages of the system

The main advantages of the alarm:

1. Price. This model, judging by the reviews, is a good option in terms of ratio low price and extensive functionality.
2. Reliability. Due to numerous interlocks, in the event of an alarm being hacked, movement by car will be impossible.
3. Ease of use. The service manual indicates all the nuances regarding the adjustment of the main parameters and the initial setup.
4. Automatic engine start option.
5. Possibility of additional connection of Starline GPS/GSM modules.
6. High range of the key fob, despite the presence of interference on the ground.

Cons that consumers highlight in their reviews:

1. The main communicator becomes less sensitive with prolonged use. The consumer will have to press the buttons several times to control the functions.
2. Clock or alarm settings can be reset automatically without user intervention.
3. The main communicator may freeze during operation. To solve this problem, it is usually necessary to replace the power supplies.
4. Low time range of starter operation during engine autostart. Because of this, at low temperatures, problems may arise with the start of the motor.

How much does the Starline B9 alarm cost?

Price table for the purchase of an alarm:

Video "Visual car alarm setup"

User Timofey Shvets clearly showed how the Starline B9 anti-theft system is set up and how to properly manage it after installation.

Alarm Starline B9 – simple system security with two-way communication and auto-start of the engine. Since 2007, this alarm has been actively installed on new cars, like domestic production, and foreign cars.

Many drivers use this equipment to this day, noting the reliability and stability of its operation.

Main features of Starline b9

In addition to remote engine warm-up, the Starline b9 alarm system has the following characteristics:

• changing code that effectively fights signal interception by code grabbers;
• noise immunity in urban environments;
• Feedback. Information about the state of the car is reflected on the key fob display;
• two key fobs: one with LCD display, the second without it;
• range in pager mode up to 1200 m, and in control mode up to 600 m;
• 9 protected zones, including blocking the engine using a relay;
• turbo timer mode, which allows you to install protection on a turbocharged engine;
• programmable functions that the owner sets at his discretion;
• 4 control channels through which you can connect additional equipment, such as window closers that implement the "Comfort" mode.

In addition to the standard version B9, the manufacturer offers Starline modifications dialog equipped with dialog coding, and Starline twage b9 with increased noise immunity and several additional software features.

Complete set and cost of autoprotection

The car alarm kit includes the following items:

• control unit (processor);
• antenna and temperature sensor in a plastic case;
• main keychain for car alarm Starline b9 with screen and backlight;
• additional keychain (without screen);
• shock sensor;
• service key Valet;
• LED signal on the windshield;
• end buttons for the hood and trunk;
• wiring with plugs for connection;
• instructions for car alarm Starline b9 in Russian.

The last cost of the B9 security system was approximately $63. At the moment there is no alarm. The manufacturer recommends installing modified versions with B96 autorun instead.

Consider the advantages and disadvantages of the system car security AT 9.

Advantages	Flaws
Feedback. The alarm key fob beeps and light signals, letting the driver know that the system has been triggered.	Small signal radius. Despite the parameters declared by the manufacturer of 600 and 1200 meters, in practice the range is much lower. This is due to the presence of obstacles and interference in the signal path.
Autorun. This function significantly increases the comfort of using the car, as it allows you to warm up the engine and interior before driving.	The fragility of the key fob buttons. After several years of operation, in most cases, the key fob buttons begin to fail and require repair.
Effective protection. The signal that the transmitter sends to the remote control is constantly changing and requires a certain response from the key fob. Such a system eliminates the use of code grabbers to select a cipher.	Lack of CAN bus connection. Modern cars equipped digital buses, for connection to which a special module is required.
Ease of installation and management. Using the Starline b9 alarm is easy and convenient. It has a clear menu in Russian. If you have skills in working with automotive electrical equipment, you can install the system yourself.	Lack of GPS-GSM signal. Control from a mobile phone and the ability to track the status of the car on the site is an advantage of newer models. This function can be connected additionally by mounting the StarLineSpace module into the system.

1. Control panel failure.
The most common complaint of Starline b9 owners is the breakdown of the key fob buttons, without which the operation of the system becomes impossible.
You can solve the problem by disassembling the remote control and wiping the contacts with alcohol. If the keys have fallen inward, you can change them at the service center.

2. Alarm malfunctions, poor communication signal.
The B9 alarm does not cope well with radio interference, which is especially abundant in big city. Unfortunately, this shortcoming cannot be corrected. The owner of the car can only make sure that the vehicle is as little as possible in the zone of strong radio interference.

Connection diagram Starline B9. How to install an alarm yourself

The security system is connected according to the diagrams that are presented in the instructions for the alarm. For experienced motorists, the Starline b9 car alarm connection diagram is quite simple. For those who have never encountered the installation of such equipment, the manufacturer recommends contacting professionals.

Owner reviews

Positive and negative opinions of drivers who used B9 are taken from the websites http://mobilradio.ru/, www.autoelectric.ru, www.autoradioservice.ru

Positive	Negative
Very good alarm for the money. I took the twage version. Good range, even through metal walls, for example, if it is in a garage. Feedback is also a cool thing, you always know if something is wrong with the car. As a fisherman who often leaves the car in a deserted place, it is very convenient for me.	I would never buy a second time! I only spoiled my nerves with this alarm. Glitches constantly. Autorun does not turn on, or turns on when she wants to. The key fob does not work properly. Once I got stuck at a car wash, I could not get into the car, the second time I was in the country. I had to unplug the unit to turn it off. I do not recommend this product to anyone, do not mess with it!
The Singalka turned out to be very tenacious. It has been on an SUV for more than 5 years. Got into water and mud. Keychain fell several times from a decent height. And nothing, it works. Reliable system, albeit a simple one.	Despite the presence of a hologram, the alarm reminds Chinese fake. The scheme is somehow clumsy, it is not clear why everything is connected like that, when everything can be done much easier. The key fob is very flimsy, the body cracked after a slight fall.
I don’t know why some people write negative reviews, starline b9 worked fine for me for about 4 years. Always clearly opens and closes the first time. In vain does not work, well, maybe a couple of times it happened. I think that professionals should install such systems, and those who undertake it themselves create unnecessary problems. I was installed at the station, and everything works without problems!	I had one like this a couple of years ago. Doesn't work well, crashes all the time. Often works, and for some reason at night. I used this alarm for 3 days and returned it back. Well, at least the service agreed to dismantle it.
Conventional, reliable and inexpensive alarm system. Everything you need is in it, and if someone wants to steal specific car, he will do it anyway, with any guard. Particularly pleased with the engine warm-up, for our climate it's just a godsend! I did the repair only once, and even then it was insignificant - I soldered the contacts on the antenna unit.	It stands on the Volga for me. It's been a long time since I installed it. In general, a good, but already outdated model, it makes no sense to put it on new cars. Firstly, theft protection is weak, and secondly, it cannot be connected via a digital bus.
I chose B6 Starline because it has a turbo timer and it has auto start. I use 3 years serious problems did not arise, with the exception of replacing the key fob, since the buttons on it began to stick over time.	I bought myself a Ten and my wife a Toyota. In our yard, cars began to be robbed often, we decided to put signaling. What can I say about this model? If we get lucky. I began to fail in just a month or two. It works fine for my wife, sometimes she says that it is not removed the first time. It was put by the same person, a proven master.

Having studied the reviews of the owners, we can conclude that B9 is one of the most successful Starline models which is very popular among the people. This system owes its fame to the advanced, at the time of release, protective functions, as well as convenience in everyday use and ease of installation.

A huge plus of StarlineB9 is the presence of automatic engine start. This function, although not a security feature, is considered practically mandatory for modern systems, as it provides comfort and saves time for warming up. To date, it cannot be said that this system provides the most reliable protection, but it can still successfully guard the car, notifying the owner of a possible break-in using feedback from the key fob.

Instructions for Starline B9

A typical instruction for a B9 car alarm consists of:

• descriptions of the general characteristics of the system;
• descriptions of the operation of the key fob and decoding of symbols on the screen;
• basic signaling functions to ensure protection;
• comfort functions of a two-way car alarm;
• additional programmable features;
• user manual and step-by-step equipment installation.

Video - Overview of the Starline twage B9 car alarm. Autostart Reviews Operating experience

Video - How to install an alarm with auto start StarLine B9 on Toyota Cresta 1995 DimASS