Car security system with two-way communication

The new security system with a built-in adapter for matching with the digital information buses of CAN and K-Line vehicles is equipped with the latest radio signal coding algorithm MAGIC CODE™ PRO 3.

Qualitatively new level encryption of the control radio signal allows the new model to easily repel any attempts of electronic hacking, even with the use of special equipment latest generation. The fact is that the latest encryption algorithm MAGIC CODE ™ PRO 3, which is equipped with SCHER-KHAN MAGICAR 12, involves the use of two encryption keys at once, and one of them is individual, that is, suitable only for one specific system. One of the keys is used once when registering the key fob to the processor unit. Another key is also fixed in the block and is further used to encrypt commands sent over the air.

The premium model has an unprecedented wide range optional service options. The owner can use features such as "Smart Turbo Timer" (automatic detection of the engine shutdown delay to cool its turbine); Pit-Stop (protection with a running engine without a key in the ignition); " Free hands» (automatic arming or disarming when the driver with a key fob-communicator moves away or approaches). In addition, with the help additional relays optional function can be realized in SCHER-KHAN MAGICAR 12 auto start engine. Autostart in new system can be made by command from the key fob or external device. There are various options for timed start: once a day or periodically after 2, 4 or 8 hours. Additionally, timed starts can be limited by the temperature value in the car interior or the voltage level in the onboard network. Automatic start can be implemented on absolutely any car, no matter if it will be with automatic or mechanical box gears, with diesel or gasoline engine or with a "virtual" start system. Additionally, thanks to the ability to connect SCHER-KHAN MAGICAR 12 to the digital bus of a modern car, it is possible to implement such convenient function as "Comfort" - automatic closing windows and sunroof, folding electric mirrors when arming.

Specifications

Keychain communicator

• Multifunctional 4-button keychain communicator with liquid crystal display
• Protection against interception of MAGIC CODE™ PRO 3 coded packets

• vibration call
• Long distance communication with the processor unit (up to 2000 m)
• Ability to drive a second car
• Automatic display backlight
• Key fob battery low indication
• Indication of temperature in the passenger compartment (when polled)
• Voltage indication battery car (when asked)
• Battery Save Mode
• Current time indication
• Alarm function
• Parking timer function
• Indication of engine operating time in automatic start, Pit-Stop and TURBOTIMER modes
• Programming the time of automatic engine start (up to a minute)
• Economy Power (one AAA element)

Processing unit

1. Ability to connect to CAN bus And K-line car for reading and transferring data
2. Opportunity to work in SLAVE mode (control with the car's standard key fob) when connected to the CAN or K-line data bus
3. The possibility of implementing the function of automatic engine start on cars with automatic transmission or manual transmission
4. The operation of the starting system with both gasoline and diesel engines
5. Starting the engine on command from the key fob
6. Automatic engine start every 2, 4 or 8 hours
7. Automatic engine start at a pre-set time every 24 hours
8. Automatic engine start taking into account temperature, on-board network voltage or by command of an external device
9. The possibility of implementing automatic start on cars equipped with a "virtual key" system
10. Personal code for disarming the system when the key fob is lost (PIN 1-code)
11. Personal code for access to the car interior if the key is lost (PIN 2-code)
12. Two-step disarming (possibly using a personal code)
13. Arming mode of a car with a running engine
14. "Hands free" function for automatic arming/disarming when the owner moves away/approaches the car
15. PANIC or JackStop™ mode

DOWNLOAD INSTRUCTIONS SCHER-KHAN MAGICAR 12

Scher-Khan Magicar 12 User Manual: 4857 Kb	Instructions for Scher-Khan installation Magicar 12: 3555 Kb

Scher-Khan magicar 12 provides the highest degree of protection for any vehicle and a two-way communication range of up to two kilometers.

Sherkhan alarm is installed on almost any modern car, thanks to the support of work with CAN and K-Line modules.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

Protection potential and many of the most modern technologies give confidence that your car will not be hacked.

New defense system

The Scher-Khan magicar 12 radio channel is protected from hacking by several levels at once. The transmitted commands are encrypted using the MAGICCOD PRO3 algorithm. Each transmitted signal varies, so it is not possible to record and reproduce it.

A special exit sensor will notify the owner of the car when it is needed, for example, if your car has blocked the road. Technology - turbo timer is able to shut down turbocharged engines smoothly and thereby extend their service life.

In Scher-Khan magicar 12, a new type of keychain is also used, it has also become much more convenient, its use is more ergonomic and easier. In addition to the listed technologies, the alarm is capable of remotely starting the engine and automatically starting it, by timer or depending on temperature.

Active security

Sherkhan Magikar 12 is equipped with a multi-stage type of security technology that insures the vehicle not only from conventional types of burglary, but also from intelligent ones. PIN-1. Only the owner of the car knows.

Thus, if the car key is lost or stolen, the attackers will not be able to open the car. Also, this function is important when passing vehicle for service at the service station. PIN-2 is very useful, while the remote security system lost or stolen. Given code input via the call sensor.

Remember! The PIN-code is indicated on the security system owner's card. Which is issued upon purchase.

The alarm system is equipped with a two-way type connection, which works perfectly in the city and is practically not afraid of any interference. Turbo timer technology contributes to the correct shutdown of turbocharged engines. This approach increases their resource.

The SLAVE algorithm implements the full functionality of the entire security system directly from the key fob. Comfort mode - closes all windows in automatic mode when the vehicle is armed. "Free hands" - will help the owner when his hands are busy, for example, with some kind of luggage. Protection scher khan magicar 12 turns off as soon as you approach the car at a given distance, respectively, on the contrary, when you move away from it, the vehicle automatically becomes armed.

Auto engine start

This technology can be implemented on vehicles with transmissions and engines of any type, including those equipped with the "Start/Stop" button. The start time of the motor is set from the key fob, in the interval of one minute.

The Scher-Khan magicar 12 also provides the ability to automatically start, while taking into account both outdoor temperature and the temperature inside the car.

Key fob functions

The alarm panel is a miniature remote control, which is equipped with a two-way communication system and a liquid crystal screen. To the main advantages keychain scher khan magicar 12 can be attributed to:

Professional car security with an extended communication range up to 2000 m. A universal system that can be installed on the most modern and complicated car, thanks to the built-in module for matching with digital buses vehicle CAN and K line. Powerful security potential and a high degree of protection against theft. Multilevel protection of the radio channel from intellectual hacking. Encryption of the radio signal according to the MAGIC CODE ™ PRO 3 level, using individual keys. The call sensor will inform the owner about the need to approach the car, for example, if the car has blocked the passage. The intelligent turbo timer increases the resource of the turbine. Technological solutions of the new key fob provided excellent information content and ergonomics of use, taking into account the specifics of operation. Optional automatic engine start.

Active security

• Multi-stage system of protection against theft, taking possession of a car or attempts to break into a car, including intelligent burglary.
• PIN-1. Known only to the owner. Eliminates the penetration of intruders into the car, for example, in case of theft of keys. Provides additional protection when transferring the car to a technical center.
• PIN-2. Useful feature when the key fob is lost or the keys are stolen. Access is provided by entering the code through the call sensor.
• Protection against theft and seizure of the car - activation of the ignition blocking mode and a complete stop of the car.

Operating comfort

• Confident two-way communication in the declared range of range in dense urban areas.
• The "Smart Turbo Timer" function determines the operating conditions of the turbine before it stops and the optimal time to reduce operating temperature. This contributes to a significant increase in the operating life of the turbine.
• The SLAVE mode allows you to control the security functions from the car's standard key fob.
• Comfort function - automatic closing all windows when arming.
• "Hands free" - the function is useful when your hands are busy with bags. When you approach, the car will automatically disarm and unlock the door locks.

Specifications

• Protection against interception of MAGIC CODE™ PRO 3 coded packets
• Long distance communication with the processor unit (up to 2000 m)
• Personal code for disarming the system when the key fob is lost (PIN 1-code) and/or when the key is lost (PIN 2-code)
• Two step disarming
• Arming mode of a car with a running engine
• Hands free function for automatic arming / disarming when the owner moves away / approaches the car
• PANIC or JackStop™ mode
• The possibility of implementing the function of automatic engine start on cars with automatic transmission or manual transmission, incl. equipped with Start/Stop button
• Operation of the starting system with both petrol and diesel engines
• Programming the time of automatic engine start (up to a minute)
• Automatic engine start every 2, 4 or 8 hours, at a predetermined time every 24 hours, taking into account the temperature, the voltage of the on-board network or by an external device command
• Multifunctional 4-button keychain communicator with liquid crystal display
• vibration call
• Automatic display backlight
• Key fob battery low indication
• Indication of temperature in the passenger compartment (when polled)
• Vehicle battery voltage indication (when polled)
• Current time indication
• Alarm function
• Parking timer function
• Indication of engine operating time in automatic start, Pit-Stop and TURBO modes
• Battery Save Mode
• Economy Power (one AAA element)
• Starting the engine on command from the key fob
• Connecting to the CAN bus and K-line of the car for reading and transmitting data
• Driving a second car
• Work in the SLAVE mode (control with the car's standard key fob)

Price: 12000 rub. With installation: 14500 rubles. Installation time: 2-3 hours

Car security system with two-way communication. The new security system with a built-in adapter for matching with the digital information buses of CAN and K-Line vehicles is equipped with the latest radio signal coding algorithm MAGIC CODE™ PRO 3.

Professional car security with an extended communication range up to 2000 m. A universal system that can be installed on the most modern and sophisticated car, thanks to the built-in CAN and K-Line digital bus coordination module. Powerful security potential and a high degree of protection against theft. Multilevel protection of the radio channel from intellectual hacking. Encryption of the radio signal according to the MAGIC CODE ™ PRO 3 level, using individual keys. The call sensor will inform the owner about the need to approach the car, for example, if the car has blocked the passage. The intelligent turbo timer increases the resource of the turbine. Technological solutions of the new key fob provided excellent information content and ergonomics of use, taking into account the specifics of operation. Optional automatic engine start.

ACTIVE SECURITY

Multi-stage system of protection against theft, taking possession of a car or attempts to break into a car, including intelligent burglary. PIN-1. Known only to the owner. Eliminates the penetration of intruders into the car, for example, in case of theft of keys. Provides additional protection when transferring the car to a technical center. PIN-2. A useful feature when the key fob is lost or the keys are stolen. Access is provided by entering the code through the call sensor. Protection against theft and seizure of the car - activation of the ignition blocking mode and a complete stop of the car.

OPERATING COMFORT

Confident two-way communication in the declared range of range in dense urban areas. The "Smart Turbo Timer" function determines the operating conditions of the turbine before it stops and the optimal time to reduce the operating temperature. This contributes to a significant increase in the operating life of the turbine. The SLAVE mode allows you to control the security functions from the car's standard key fob. Function "Comfort" - automatic closing of all windows when arming. "Hands free" - the function is useful when your hands are busy with bags. When you approach, the car will automatically disarm and unlock the door locks.

FAVORABLE

For motorists who care about car protection. Excellent for use in major cities, where the level of interference created by electric and radio fields is increased. A unique PIN code is written on the owner's individual card. Upgradable firmware expands the list of security system functionality for each specific car, enhancing the security potential and additional comfort during operation. Quick programming of the system according to the individual wishes of the car owner when installing the model in a dealership or installation center. Warranty - 5 years from the manufacturer. Technical support by the manufacturer throughout Russia and neighboring countries. Designed to operate in high RF interference and harsh environments. climatic conditions throughout Russia in the range from -85 Сº to +50 Сº.

VEHICLE ALARM SYSTEM (STSTS) OPERATING MANUAL 2 OPERATING MANUAL The vehicle alarm system (STSTS) SCHER-KHAN MAGICAR 12 (hereinafter referred to as the system) complies with the mandatory requirements in the GOST R certification system for car security devices: GOST R 41.97-99 Uniform provisions concerning the approval of vehicle alarm systems (VTS) and motor vehicles with respect to their alarm systems (VTS); GOST R 50009-2000 Compatibility technical means electromagnetic. Technical means burglar alarm. Requirements and test methods. Thank you for purchasing the SCHER-KHAN MAGICAR 12 two-way car security system. The constant research and development of our company embodies the most advanced ideas and serves to meet all the needs of users of our systems. The SCHER-KHAN MAGICAR 12 system is a sophisticated electronic vehicle equipment. The safety of your life, health and road conditions, the quality of work of nearby radio-electronic equipment and communication facilities depend on its functioning and proper installation. Trust the installation of the system only to specialized service stations. During operation, periodically check the correct functioning of the system. ATTENTION! When buying, check that the warranty card is filled out correctly. The manufacturer and supplier of the system are not responsible for any ignorance of the instructions for installation and operation, as well as for errors made during installation. If you experience problems with the system, please contact your service center for diagnosis or consultation. The manufacturer reserves the right to make changes to the design of the system in order to improve consumer properties. SCHER-KHAN MAGICAR 12 PURPOSE OF SCHER-KHAN MAGICAR 12 The SCHER-KHAN MAGICAR 12 system is a car alarm system with the ability to control via radio channel using a key fob communicator with a liquid crystal display. The system performs a two-way exchange of information between the key fob-communicator and the processor unit. Remote control system and alarm messages are received at a distance of up to 2000 m. The system has the ability to implement automatic engine start. The system is designed to work on vehicles with 12 V on-board network voltage and provides the ability to connect to the vehicle's standard CAN and K-line data bus. Protection of the processor unit, shock sensor, antenna unit made according to the IP-40 standard and provides for installation in the car. The siren is made according to the IP-65 standard and can be installed in engine compartment, away from the exhaust manifold and high voltage systems. CONTENTS PURPOSE OF SCHER-KHAN MAGICAR 12 .............................................. .............. 3 SCOPE OF DELIVERY............................... ................................................. .5 Optional Components of SCHER-KHAN MAGICAR 12.................................. 6 LIST OF FUNCTIONS .......... ................................................. .............................. 7 Functions of the keyfob-communicator .................. ................................................. .. 7 Functions processor unit................................................. ....................... 7 TECHNICAL PARAMETERS .............................. ................................................. ... 9 Types of alarm ....................................................... ............................................... 9 Control methods .......... ................................................. ................................. 9 Protection electrical circuits................................................. ...................... 10 Areas of protection .................. ................................................. .................................. 10 Operating parameters ............................... ................................................. .......... 10 Batteries .......................................... ................................................. ........ 11 DESCRIPTION OF KEYFOBS ............................................... ............................................... 11 Preparing the key fob -Communicator to work .................................................. .. 11 Symbols on the keyfob-communicator display .............................................. ........ 11 Correspondence of the buttons of the main and additional key fobs. .................................. 13 Keyfob communicator buttons assignment .............................. ........................... 13 Setting up the keyfob-communicator .............................. ................................................... 15 Turning on the backlight of the display... ................................................. ....................... 17 3 4 OPERATING MANUAL Parking timer function .................................. ................................................. ... 17 Keypad lock.................................................... ......................................... 17 Battery Save Mode.. ................................................. 18 Driving a second car............................................................... ....................... 18 Signal level indication feedback ................................................. ... 19 SYSTEM OPERATION.................................................................. ...................... 20 Arming .............................. ................................................. ............... 20 Arming with the engine running .............................. .............. 22 Arming in Pit-Stop mode .............................. .............................. 23 Auto arming .............................. .................................. 27 Alarm Mode .......... ................................................. ......................................... 28 Reminder mode..... ................................................. ...................................... 28 Disarming .......... ................................................. ......................................... 29 Two-Step Disarming.... ................................................. ......................................... 31 Automatic return to armed mode .............................. .................................. 32 Finding a vehicle .................. ................................................. .................................. 32 Hands-free function .............................. ................................................. .................... 32 Opening the trunk .............................. ................................................. .............. 34 Checking the status .................................. ................................................. ........ 35 Panic Mode or JackStop™ .................................. ......................................... 37 Silencing the siren..... ................................................. .................... 38 VALET Mode............................... ................................................. .............................. 39 Turning the shock sensor on and off .............................. .................................................. 41 Automatic control of door locks when switching on and off ignition, by the fact the engine is running or while picking up speed .... 43 Turbo mode .............................................. ................................................. ...................................... 43 Calling the owner of the vehicle .......................... ................................................. ... 48 Auxiliary Channel #1 Control .......................................................... .............. 49 Control of sub channel No. 2. ................................................. .. 50 Auxiliary Channel No. 6 Control .......................................................... ........................... 51 Remote engine start .............................................. ................................................. 52 Backup mode of automatic engine start for manual transmission ..... 55 Diagnosis of causes failed automatic engine start .............................. 57 Setting the timer for automatic engine start .............................. 58 Starting the engine by an external signal device .............................................. 60 Limiting the number of automatic starts.... .............................. 61 SCHER-KHAN MAGICAR 12 Limiting the number of timed starts by battery temperature and voltage .............................................................................. ................................................. ..... 61 Disarming the system without a key fob and using a personal code ..... 61 Disarming the system without a key fob using a PIN 1 code.......... 62 Recording a personal PIN 1 -code ................................................. ........................... 62 Using your personal PIN 1-code .............................. .................................. 63 Accessing the car without a key fob using a PIN 2 code.... .............. 64 Writing a personal PIN 2-code .............................. ......................................................... 65 Using a personal PIN 2-code.. ................................................. ... 66 Engine locks............................................... .................................................. 67 Additional lighting when setting and disarming .............................. 67 open door ................................................. .............. 67 Protection of the radio channel from interception of the code .............................. .............................. 68 System operation in SLAVE mode .............................. ................................................. ....... 68 Adjusting the sensitivity of the shock sensor .............................................. .......................... 68 Adjusting the sensitivity of the owner call sensor .............................. 68 Programming the tachometer signal .. ................................................... 69 PROGRAMMING THE KEYFOBS... ................................................. ...................... 69 PROGRAMMING FUNCTIONS USING THE KEY FOB ....................... 71 Programmable Functions Menu No. 1.... ................................................. ...... 73 Menu No. 1 programmable functions in detail ............................... 76 Setting all menu No. 1 programmable functions to factory defaults.. ................................................. ................................................. .................. 85 Programmable Function Menu No. 2 .............................. .................................. 86 Programmable Function Menu No. 3 .............................. ................................................. 90 SUPPLY SET The specified scope of delivery is the basic and can be expanded according to the wishes of the buyer with additional components. Name Quantity Instruction manual .................................................................. ............................... 1 Installation Guide ............................... ................................................. ................. 1 Reminder ............................... ................................................. .................................. 1 Processing unit SCHER-KHAN MAGICAR 12.......... ............................... 1 Keyfob communicator .......... ................................................. .............................. 1 5 6 OPERATING MANUAL Optional key fob .............. ................................................. ...................... 1 2-pin power connector of the built-in engine block with wires (the mating connector CN1 comes out of the block on the wires) .............. ...... 1 10-pin power connector with cable and three fuses (white CN2 connector)................................. ................................................. ............... 1 6-pin power connector with cable and two fuses (white CN3 connector). ................................................. ................................................. 1 16-pin low current connector ( white connector CN4).... 1 Antenna module with cable (6-pin blue connector CN5)................. 1 Temperature sensor with cable (2-pin white connector CN6)................. 1 3-pin connector for connecting an external trigger with cable (CN7 red connector)................................. ................................................. .1 Shock sensor with cable (4-pin red connector CN8) ..................... 1 4-pin connector for connecting an additional sensor with cable (green connector CN9 )................................................. ....................... 1 4-pin connector for CAN bus and K-line with cable (blue connector CN11)...... ................................................. .................. 1 Call sensor with cable (4-pin white connector CN12)................................. .1 Hood/trunk limit switch with wire .............................................................. ... 1 Interlock relay with socket ....................................................... .................................... 1 Siren............. ................................................. ................................................. ... 1 Sticker under the antenna unit .......................................... .................................... 2 Sticker under the call sensor .......... ................................................. .................. 2 Sticker on the glass .............................. ................................................. .................. 2 Optional components SCHER-KHAN MAGICAR 12 Optional components are not included and must be purchased separately. Key fob communicator SCHER-KHAN MAGICAR 12 (with display)* Key fob SCHER-KHAN MAGICAR 12 (without display)* Programmer SCHER-KHAN CM4 Immobilizer bypass module SCHER-KHAN BP-2 Immobilizer bypass module SCHER-KHAN BP-3 * Processor unit can remember the codes of only three key fobs. SCHER-KHAN MAGICAR 12 LIST OF FUNCTIONS Functions of keyfob-communicator Multifunctional 4-button keyfob-communicator with liquid crystal display Protection against interception of MAGIC CODE™ PRO 3 code packets Arming and disarming with different buttons Audiovisual confirmation of executed commands Vibrating call Long-distance communication with the processor unit ( up to 2000 m) Synchronization of the readings of all key fobs stored in the system memory Indication of the level of the feedback signal Possibility to control a second car Automatic backlighting of the display Indication of the low battery of the key fob Indication of the temperature in the car interior (during polling) Indication of the voltage of the car battery (during polling) Indication of battery voltage keyfob (when polled) Energy saving mode Battery Save Mode Indication of the current time Alarm function Parking timer function Indication of engine operation time in automatic start, Pit-Stop and Turbo modes Programming of automatic engine start time (accurate to a minute) Sound and visual reminder mode on receipt of an alarm message Key fob keypad lock Operational, from the key fob, programming of all system functions Economical power supply (one AAA element) 7 8 OPERATING MANUAL Possibility to implement the function of automatic engine start on cars with automatic or manual transmission Operation of the starting system with both petrol and diesel engines Starting the engine on command from remote control Automatic start of the engine every 2, 4 or 8 hours Automatic start of the engine at a predetermined time every 24 hours Tracking the start of the engine by tachometer or generator signals Automatic start of the engine taking into account the temperature, voltage of the on-board network or by command of an external device Possibility of implementing automatic start on cars equipped with the “virtual key” system Personal code for disarming the system in case of loss of the key fob (PIN 1-code) Personal code for access to the car interior in case of loss of the key (PIN 2-code) Two-step disarming (possibly using a personal code) Mode guarding the car with the engine running Arming mode without siren warning signals, without siren alarm signals (programmable function) Hands-free function for automatic arming / disarming when the owner moves away / approaches the car Power control output central lock Priority unlocking of the driver's door (programmable function) Reprogrammable power additional channel No. 6 Power output for alarm control (two circuits) Built-in power relay for engine blocking Programming the type of external blocking relay Seven universal programmable channels for controlling additional devices with the ability to change operation algorithms Accounting for cabin light delay (programmable function) Automatic control of door locks when the ignition is turned on and off, by a tachometer signal or when accelerating Turbo timer mode with variable cooling time for the turbine of the SCHER-KHAN MAGICAR 12 engine Pit-Stop mode Tracking the intensity of engine operation by tachometric signal Automatic arming ( programmable function) Automatic return to armed mode if the door was not opened (programmable function) Door open alarm warning (programmable function) Panic or JackStop™ mode TECHNICAL PARAMETERS klaxon 10 or 30 sec. 10 or 30 sec. Optical, two channels using alarm By means of radio signal transmission up to 2000 m* 10 or 30 sec. 4 sec. Operating frequency Continuous Intermittent at 1 Hz Intermittent at 1 Hz Intermittent at 0.08 Hz * The table shows the maximum value. Actual distance may vary and depends on row objective reasons: relative position of the keyfob-communicator antenna and the antenna unit, the presence of metal objects near the antennas, radio interference on the air, weather conditions, the degree of discharge of the keyfob battery, etc. Methods of remote control of the radio frequency transmitter (keyfob) at a frequency of 433.92 MHz ± 0 ,2% at a power of not more than 10 mW With the help of a call sensor Automatically, according to signals from sensors Through the car's CAN data bus 9 10 OPERATION MANUAL automotive fuses slow-acting according to the wiring diagram) Internal current-limiting combustible resistors Transistor internal protections Varistors against overvoltage and impulse noise Diodes against polarity reversal of power supplies Protection areas Protected zones Contact sensors (opening the door, hood, trunk, turning on the ignition or pressing the brake pedal) Sensor hit and extra sensor (it is possible to disable sensors before or after arming) Radio control channel Sensors of standard CAN devices (opening a door, hood, trunk, turning on the ignition or pressing the brake pedal) Protection methods Alarm signal with a response time limited to 30 seconds. in one cycle Alarm signal with response time limited to 10 sec. in one cycle Using a secure algorithm for dynamic coding of transmitted commands An alarm signal with a response time limit of up to 30 seconds. in one cycle Operating parameters Processing unit Value Supply voltage Current consumption in standby mode Operating temperature range Weight Dimensions Parameter Min. Max. 9V 15 mA -40 °С 18 V 35 mA +85 °С 230 g 126 x 95 x 31 mm SCHER-KHAN MAGICAR 12 Batteries Consumer Voltage and cell type Processing unit 12 V (car battery) Key fob communicator 1.5 V (AAA battery) Key fob without display Life of one set of batteries Limited by vehicle battery life Approximately 4 months* 6V (two CR2016 batteries) Approximately 3 years* * Table is an average. The service life of the key fob battery depends on the intensity of use of the key fob, the quality of the battery and the operating modes of the key fob. ATTENTION! Use only quality batteries. Using batteries Low quality can lead not only to a reduction in the life of the key fob, but also to its damage. DESCRIPTION OF KEYFOBS PREPARING THE KEYFOB-COMMUNICATOR FOR OPERATION Before using the keyfob, remove the lock of the battery compartment cover, press the cover and pull it out in the direction of the antenna. Insert the battery into the battery compartment, observing the polarity indicated on the bottom of the battery compartment. Close and lock the battery cover. Keyring is ready to go. Symbols on the keyfob-communicator display Indicator of transmitter operation of the keyfob-communicator Indicator of feedback signal level Indicator of battery discharge of the keyfob-communicator and Battery Save Mode Indicator of time, voltage, temperature and additional textual information 11 12 OPERATION MANUAL VALET mode indicator Security mode indicator . Status indicator for door locks in VALET mode Indicator for siren signal activation Indicator for disabling the shock sensor and additional sensor Indicator for vibrating call activation Indicator for enabling automatic control of the central lock Indicator for alarm clock activation Indicator for enabling automatic engine start by timer Indicator for enabling Turbo mode Indicator for enabling passive arming Hands-free mode activation indicator Second vehicle mode transition indicator Door open indicator Hood open indicator Trunk open indicator Brake pedal depressed indicator Shock sensor and auxiliary sensor alarm indicator Completed start reservation and ignition-on alarm Call indicator the owner of the car SCHER-KHAN MAGICAR 12 Indicator of the running engine Indicator of the light signaling operation Indicator of the on-board network voltage during timed engine starts Indicator of the temperature in the passenger compartment during timed engine starts 5 sec. II 0.5 sec. Function (mode) Activate security mode Stop alarm mode Activate starter/ignition interlock Close locks Car search Disable security mode Stop alarm mode Disable starter/ignition interlock Open locks 13 14 OPERATION MANUAL III IV I– 0.5 sec. 0.5 sec. 2 sec. II - 2 sec. III– 2 sec. IV– (I+II) (I+III) 2 sec. 0.5 sec. 0.5 sec. (I+IV) 0.5 sec. (II+III) 0.5 sec. (II+IV) 0.5 sec. (III+IV) 0.5 sec. (I + II) - 2 sec. (I + III) - 2 sec. (I + IV) - 2 sec. (II + III) - 2 sec. (II + IV) - 2 sec. (III + IV) - 2 sec. II, twice within 1 sec. less than 0.5 sec. Turn on display backlight Check system status Turn on Panic or JackStop™ Remote engine start/stop Pit-Stop ignition switch Open trunk Turn on Auxiliary Channel #6 Control Auxiliary Channel #1 Turn on/off siren signals Turn on/off VALET mode Turn on/off turn off shock sensor and additional sensor Control of additional channel No. 2 Enable/disable activation of the automatic start timer Enable/disable keypad lock Enable/disable second car control mode Enter key fob function programming mode Enter programming menu 1 Enable/disable hands-free mode* Entering the programming menu 2 Entering the programming menu 3 Entering the PIN 1 code programming mode (with the ignition on) IV, twice within 1 sec. less than 0.5 sec. Enable/disable parking timer less than 0.5 sec. Recording the keyfob in the system memory * When pressing the combination of buttons (II + III) for 2 seconds. there is a sequential change of modes in the order (1) > (2) > (off). In mode (1), the Hands-free function has a short operating range - the symbol does not blink. In mode (2) the hands-free function has a long working range - the symbol flashes. CONFIGURATION OF THE KEYFOB-COMMUNICATOR Purpose of the buttons of the keyfob-communicator when setting its operating modes: Button I – setting the clock, as well as on/off. modes; Button II - setting minutes; Button III - selection of the previous mode; Button IV - selection of the next mode. To set the desired key fob operation mode, follow the steps in accordance with the table below. Step Step 1 Step 2 Button number (I+III) – Press time 2 sec. Automatic transition after Step 1 Function (mode) Entering the keyfob function programming mode. The appearance of the inscription is confirmed by the tone signal of the key fob. Setting the current time. The current time flashes. Pressing the I button changes the hour value. Pressing button II changes the minutes. 15 16 INSTRUCTIONS FOR USE Step 3 IV 0.5 sec. Step 4 IV 0.5 sec. Step 5 IV 0.5 sec. Step 6 IV 0.5 sec. Step 7 IV 0.5 sec. Step 8 IV 0.5 sec. Setting the time for automatic start of the engine by timer. The display of the set time, symbols and flash. Pressing the I button changes the hour value. Pressing button II changes the minutes. Set the alarm time. The display of the set time, symbols and flash. Pressing the I button changes the hour value. Pressing button II changes the minutes. Turn on/off the alarm. The symbol and the current status of the function flash. Pressing the I button sequentially changes the current state of the function (ON – OFF – ON). Enable/disable the vehicle owner call function. The symbol and the current status of the function flash. Pressing the I button sequentially changes the current state of the function (ON – OFF – ON). Turning on/off the vibration signal of the key fob. The symbol and the current status of the function flash. Pressing the I button sequentially changes the current state of the function (ON – OFF – ON). Changing the temperature display format "оС" or "оF". The character corresponding to the current format blinks. Pressing the I button sequentially changes the temperature display format (oC - oF - oC). SCHER-KHAN MAGICAR 12 Step 9 IV Step 10 (I+III) – 0.5 sec. 2 sec. Enable/disable the Battery Save Mode function. The symbol and the current status of the function flash. Pressing the I button sequentially changes the current state of the function (ON – OFF – ON). Exit from the programming mode of the key fob functions. The keyfob enters the system control mode. Confirmed by the key fob tone. ATTENTION! In the keyfob-communicator function programming mode, the time between pressing the keyfob buttons should not exceed 30 seconds, otherwise the keyfob will automatically switch to the system control mode. Setting the exact value of the current time is a prerequisite for correct operation alarm clock and automatic start of the engine by timer. SWITCHING THE DISPLAY BACKLIGHT [BUTTON III] A short press of button III on the keyfob-communicator will turn on the backlight of the keyfob display for 10 seconds. PARKING TIMER FUNCTION To activate the parking timer twice within 1 second. shortly press button III on the keyfob-communicator. You will hear one short signal from the key fob, the parking timer will start counting the time, the current time on the display will be replaced by the parking timer readings with a frequency of 1 time in 3 seconds. To turn off the parking timer twice within 1 second. shortly press button III of the keyfob communicator. You will hear two short beeps from the key fob, the parking timer readings will no longer be displayed on the display. KEYBOARD LOCK [BUTTONS (III + IV)] You can lock the communicator's keypad if you want to avoid accidentally pressing the buttons. To do this, briefly press the buttons (III + IV) of the key fob. You will hear one short beep from the key fob, on the key fob display for 3 sec. Hold will appear, the key fob buttons will be blocked. To turn off the keypad lock, briefly press the buttons (III + IV) of the key fob. You will hear two short beeps from the key fob, the key fob keypad will unlock. The keypad lock is automatically disabled when an alarm message is received on the keyfob communicator. BATTERY SAVE MODE Battery Save Mode is used to reduce the power consumption of the communicator. In this mode, the key fob has a shorter range and information about triggered protected areas does not appear on the key fob. There is feedback from the system only when arming and disarming with this key fob. The vibrating alert feature does not work in Battery Save Mode. The key fob communicator automatically switches to Battery Save Mode when the battery voltage is critically low. Forced activation and deactivation of the Battery Save Mode is possible in the keyfob-communicator programming mode (see "Setting the keyfob-communicator" on page 15). The indication of the activation of the mode is the blinking of the symbol on the key fob display. CONTROL OF THE SECOND VEHICLE The keyfob-communicator can be used for independent control of the second car if it is equipped with the SCHER-KHAN MAGICAR 11 or SCHER-KHAN MAGICAR 12 system. key fob for 2 sec. You will hear one short beep from the key fob, the symbol will appear on the key fob display. After that, you need to program the keyfob into the memory of the second system (see "Programming keyfobs" on page 69). Now you can fully control the second car. SCHER-KHAN MAGICAR 12 To return to the control mode of the first car, press the buttons (I + II) of the key fob for 2 seconds. You will hear two short beeps from the key fob, the symbol will disappear from the display, the key fob will switch to the first car control mode. INDICATION OF THE LEVEL OF THE FEEDBACK SIGNAL The level of the feedback signal from the processor unit to the key fob is displayed on the key fob display as a symbol. When the feedback quality deteriorates, the number of elements of this symbol decreases - , . If there is no feedback signal, the symbols and disappear from the keyfob display. The indicator readings change only when a feedback signal is received. You can check the quality of the feedback between the processor unit and the key fob by briefly pressing the button IV of the key fob. 19 20 OPERATION MANUAL SYSTEM OPERATION ATTENTION! When using the CAN-module built into the SCHER-KHAN MAGICAR 12, the algorithms of the security system operation may differ from those described in this manual, depending on the availability of individual parameters and settings of the car's standard CAN devices. So, for example, there may be differences in the operation of the light signaling. ARMING [BUTTON I] Turn off the ignition, close the doors, hood, trunk. Briefly press button I on the key fob. The system will switch to the armed mode, the door locks will close, the engine locks will turn on until the system is disarmed. The system also has the ability to arm the car with a regular key fob if the SLAVE mode is used, while the appropriate connections to the CAN bus and system settings must be made. The possibility of operating the SLAVE mode should be clarified with a system installation specialist. When arming: SIREN SIGNAL: ALARM: LED INDICATOR: One beep* Flashes once* After arming, it starts flashing at a frequency of 1 time per second SCHER-KHAN MAGICAR 12 DISPLAY: KEY FOB SIGNAL: closed lock will flash five times, then the closed lock symbol will be displayed continuously One short beep Switching on the sensors: After the LED starts flashing, the system will start monitoring the status of the doors, hood, trunk, brake pedal and ignition. If the interior light delay is used, the door triggers will be armed after the set time has elapsed (programmable function 2-2, see page 86). The shock sensor and the additional sensor will turn on after 30 seconds. after arming. Note: If you heard three additional siren sounds* and three key fob signals while arming, alarm flashed three times*, and on the display for 5 seconds. If the door open icon flashes, it means that the door(s) of the car is open. If you heard four additional signal siren* and three keyfob signals, the alarm flashed four times*, and on the display for 5 seconds. If the image of the hood or trunk is flashing, this means that the hood or trunk of the car is open. If, when arming, you heard only 3 signals from the key fob, this means that the ignition is on (the key flashes) or the brake pedal is pressed (the symbol flashes). In this case, the system will arm and bypass the activated sensor. The door, hood, trunk, ignition or brake pedal sensor will be immediately armed when it is restored. There will be no door sensor bypass signal if the 2-2 function is enabled. * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Mute the siren signals" on page 38), and the presence of alarm signals is determined by the value of the programmable function 2-1 (see page 86). 21 22 OPERATING MANUAL ARMING WITH ENGINE RUNNING [BUTTON I] With the ignition on, close the doors, hood, trunk. Briefly press button I on the key fob. The system will go into armed mode, the door locks will be locked, the starter interlock will turn on until the system is disarmed. Arming the system with the engine running with the car's standard key fob in SLAVE mode may not be available and depends on the characteristics of a particular car. The ignition lock will not be activated until the ignition is turned off or until an alarm occurs (see programmable functions 2-6, 2-7 on page 86). To implement protection with a running engine, it is necessary that the appropriate connections be made during installation of the system and the value of the tachometric signal be programmed (see "Programming the tachometric signal" on page 69), if the engine is controlled by a tachometer. When arming: SIREN SIGNAL: ALARM: LED INDICATOR: DISPLAY: KEY FOB SIGNAL: One beep* Flashes once* After arming, starts flashing 1 time per second for 5 sec. smoke and key symbol flashes Three double beeps Switching on the sensors: After the LED starts flashing, the system will start monitoring the status of the doors, hood, trunk, brake pedal. SCHER-KHAN MAGICAR 12 In the case of using the cabin light delay accounting, the door triggers will be armed after the set time has elapsed (programmable function 2-2, see p. page 86). The shock sensor and the additional sensor in the armed mode with the engine running are turned off for the duration of the engine operation. After 30 sec. after the engine stops running, the system will begin to monitor the shock sensor and the additional sensor. Note: If you heard three additional siren sounds* while arming, the alarm flashed three times*, and the display for 5 seconds. If the door open icon flashes, it means that the door(s) of the car is open. If you hear four additional siren sounds*, the alarm will flash four times* and the display will show a flash for 5 seconds. If the image of the hood or trunk is flashing, this means that the hood or trunk of the car is open. If, when arming, on the display for 5 seconds. symbol flashes, this means that the brake pedal is depressed. The system ignores activated sensors. Entrances of doors, hood, trunk, brake pedals are immediately taken under protection when their operability is restored. Signals about bypassing the door sensors will not follow if the 2-2 function is activated, but if the door is open at this moment, then within 5 seconds. the open door symbol will flash on the display. Arming with a running engine is not possible when redundant automatic start is performed. * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Mute the siren signals" on page 38), and the presence of alarm signals is determined by the value of the programmable function 2-1 (see page 86). ARMING IN PIT-STOP MODE The system allows you to arm the system with the engine running without a key in the ignition. To implement this function, it is necessary that the appropriate connections and settings are made during system installation. Function 2-26 (see page 89) must be set to 2 (limited mode time) or 3 (unlimited mode time) value. If the engine is controlled by a tachometer, a tachometer signal value must be programmed (see "Programming the tachometer signal" on page 69). 23 24 OPERATOR'S MANUAL To engage the Pit-Stop mode, do the following: 1. With the engine running, place the gearshift lever in neutral or P (Park) position. 2. Apply the parking brake. Release the brake pedal. 3. Press keyfob button II for 2 seconds. You will hear one short beep from the key fob, light signaling will flash once. After that, the ignition support will turn on, you will hear two double signals from the key fob, the countdown will begin until the end of the Pit-Stop mode. 4. Turn the key in the ignition switch from the ON position to the OFF position. The engine will then continue to run for the set time. If Programmable Function 2-26 (See page 89) is set to 2, the engine will continue to run for the time set in Programmable Function 1-7 (See page 79). When programmable function 2-26 (see page 89) is set to 3, the engine run time is unlimited. When Pit-Stop mode is activated: SIREN SIGNAL: ALARM: LED INDICATOR: DISPLAY: KEY FOB SIGNAL: One Beeper* Flashes once, then flashes at a frequency of 1 every 5 seconds. (programmable function 1-16, see page 83) According to the system status Vehicle headlights and the lock symbol will flash five times, then the smoke symbol will flash, the Pit-Stop countdown will start Two double beeps SCHER-KHAN MAGICAR 12 Note: Pit-Stop mode can only be engaged when the parking brake is applied, the hood is closed, and the brake pedal is not depressed. Activation of the Pit-Stop mode will be accompanied by the activation of the starter lock. If Programmable Function 2-26 (Unlimited Run Time, page 89) is set to 3, engine hours and minutes will count up instead of counting down to the end of Pit-Stop engine operation. Now you can arm the system in Pit-Stop mode. To do this, briefly press button I on the key fob. The system will be armed, the door locks will be locked, the starter lock will be enabled until the system is disarmed and the Pit-Stop mode is completed. The ignition lock will not be activated until the end of the engine operation or until the start of an alarm. Arming the system with the engine running with the car's standard key fob in SLAVE mode may not be available and depends on the characteristics of a particular car. When arming: SIREN SIGNAL: ALARM: One beep* Flash once* when armed, LED indicator will start: After flashing at a rate of 1 time per second Vehicle headlights will flash five times, DISPLAY: Lock symbol will appear KEY FOB SIGNAL: Three double signal 25 26 OPERATING MANUAL Switching on the sensors: After the LED starts flashing, the system will start monitoring the status of the doors, hood, trunk, brake pedal. If the interior light delay is used, the door triggers will be armed after the set time has elapsed (programmable function 2-2, see page 86). The shock sensor and the additional sensor will turn on after 30 seconds. after stopping the engine. Note: If you heard three additional siren sounds* while arming, the alarm flashed three times*, and the display for 5 seconds. the open door icon flashes, this means that the car door is open. If you hear four additional siren sounds*, the alarm will flash four times* and the display will display for 5 seconds. If the trunk image flashes, it means that the trunk is open in the car. In this case, the system will arm and bypass the activated sensor. Disabled sensors will be immediately armed when their functionality is restored. Signals about bypassing the door sensors will not follow if the 2-2 function is activated, but if the door is open at this moment, then within 5 seconds. the open door symbol will flash on the display. To turn off the Pit-Stop mode, press the keyfob button II for 2 seconds. When Pit-Stop mode is turned off: SIREN ALARM: Two beeps* ALARM: Flashes twice LED INDICATOR: According to system status Vehicle headlights and lock symbol flashes five times, smoke symbol disappears, DISPLAY: Pit-Stop timing ends KEYFOB SIGNAL: One double beep * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Siren chirp silence" on page 38). SCHER-KHAN MAGICAR 12 parking brake, opening the hood or depressing the brake pedal. Pit-Stop mode cannot be activated in Turbo mode. One minute before the end of the engine operation time in automatic mode, the key fob will give two short sound signal. AUTO-ARMING The auto-arming function can be enabled/disabled by changing the status of programmable function 1-4 (see page 78). When enabled automatic staging the system automatically enters the armed mode when the ignition is off after 30 seconds. after closing the last door (hood, trunk). The system warns of automatic arming with alarms and siren* every 10 seconds. If within 30 sec. doors (hood, trunk) were opened, the system will arm itself in 30 seconds. after closing the doors (hood, trunk). The indication of the activation of the function is the presence of a symbol on the keyfob display. on If the value 4 of the programmable function 1-4 is selected (see page 78), the system does not arm itself, but only turns on the starter (ignition) blocking after 30 seconds. after the ignition is turned off or after the start backup, Pit-Stop and Turbo modes are completed. To turn off the starter (ignition) blocking in this case, briefly press button II on the key fob. The blocking switched off in this way is activated again only after the ignition is switched off again or the automatic modes of engine operation are completed. * The presence of siren signals is determined by the value of programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Siren chirps off" on page 38). 27 28 OPERATION MANUAL ALARM MODE If a door, hood, trunk is opened in armed mode, the brake pedal is pressed or the ignition is switched on, the system will go into alarm mode. Alarms and sirens will last 30 seconds*. At the end of 30 seconds, the system will return to armed mode. If the cause that caused the alarm has not been eliminated, the system will work out 8 alarm cycles of 30 seconds each and return to armed mode bypassing the active sensor. If the alarm zone of the shock sensor or additional sensor (strong impact) is triggered, the system will go into alarm mode for 10 seconds, the alarms and sirens will last 10 seconds *. At the end of 10 seconds, the system will return to armed mode. When the warning zone of a shock sensor or an additional sensor (low impact) is triggered, the system will not go into alarm mode, but will only issue a series of four short siren sounds * and an alarm. Light signals in the latter case, they can be disabled using programmable function 1-16 (see page 83). You can stop the alarm mode by short pressing button I or II of the key fob. In alarm mode: SIREN ALARM: ALARM: Alarm 10 or 30 sec.* Flashes 10 or 30 sec.* flashes 3 times per LED: Starts a second Images flash depending on DISPLAY: alarm cause Intermittent beep for 10 or 30 sec. Further short signals KEY FOB SIGNAL: 1 time every 2 or 4 seconds. (reminder mode) * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Silence of the siren signals" on page 38), and the presence of alarm signals is determined by the value of the programmable functions 2-1 (see page 86). REMINDER MODE If the keyfob-communicator received an alarm signal or a signal to call the owner, but the message was skipped (the alarm was not stopped by SCHER-KHAN MAGICAR 12 by pressing buttons I or II of the keyfob), then the keyfob, after the signal is transmitted, goes into the reminder mode (short beeps and indication of the zone that triggered the alarm mode). To stop the reminder mode and check the state of the car, briefly press the key fob button IV. In reminder mode: SIREN SIGNAL: ALARM: No signal No signal Flashes at 1 time per second LED: after calling the owner and 3 times per second after alarm Images flash depending on DISPLAY: on the cause of the reminder Short beeps 1 time every 2 seconds . for door, hood, trunk, brake and ignition pedal sensors*. Short beeps 1 time every 4 sec. KEY FOB SIGNAL: for shock sensor and additional sensor* Short beeps 1 time every 6 sec. for the owner's call sensor* * There are no short beeps from the keyfob when the vibrating alert is on. Note: The keyfob-communicator does not enter the reminder mode when receiving a warning signal from the shock sensor and the additional sensor (weak impact). DISARMING [BUTTON II] When the system is armed, briefly press button II on the key fob. The system will be disarmed, the door locks will be unlocked, the engine locks will be disabled. The system also has the ability to disarm with the car's standard key fob, if the SLAVE mode is used, in this case, the appropriate connections and settings of the system must be made. The possibility of operating the SLAVE mode should be clarified with a system installation specialist. When disarmed: SIREN BEEP: Two beeps* ALARM: Flash twice* LED INDICATOR: No tone The vehicle headlights will flash five times, the open lock symbol will flash five times. If during the DISPLAY: arming time a shock sensor, an additional sensor or a call sensor was triggered, the number of sensor activations will be displayed. You heard 6 short siren sounds*, and the alarm flashed 6 times*, this means that during the armed period the system entered the alarm mode from the sensors of the doors, hood, trunk, brake or ignition pedal. If, when disarming, you heard 5 short siren signals*, and the alarm flashed 5 times*, this means that during the armed period the system entered the alarm mode from the shock sensor or additional sensor (strong impact). If, when disarming, you heard 4 short siren sounds*, and the alarm flashed 4 times*, this means that during the armed period the system was triggered by the warning zone of the shock sensor or an additional sensor (weak impact). SCHER-KHAN MAGICAR 12 If in armed mode the system was triggered by a warning zone or an alarm zone of a shock sensor or an additional sensor, then when disarming the system, the system will report this by flashing the symbol on the key fob display, the inscription Shock and indicating the number of operations. If in the armed mode the system was triggered by the owner's call sensor, then when disarming the system, the system will report this by flashing the symbol on the key fob display, the inscription CALL and indicating the number of triggers. * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Mute the siren signals" on page 38), and the presence of alarm signals is determined by the value of the programmable function 2-1 (see page 86). Note: The system has the ability to implement priority unlocking of the driver's door when disarming. To implement this function, it is necessary that the appropriate connections and settings are made during system installation. The possibility of implementing this function should be clarified with a system installation specialist. When using this function, disarming will be accompanied by unlocking driver's door , and the passenger doors are unlocked only after additional pressing of the key fob button II. TWO-STEP DISARMING The system has the possibility of two-step disarming, which improves the anti-theft properties of the system. To do this, programmable function 1-9 must be activated (see page 79). Now, in order to disarm the system after pressing button II of the key fob once within 15 seconds. it is necessary to press the button II of the key fob again if the PIN 1 code is not used. When using the PIN 1 code, it must be entered from the key fob by successively pressing the buttons corresponding to the code numbers. Entering each digit of the code will be accompanied by an alarm flash. ATTENTION! If the PIN 1 code is entered incorrectly three times, the system will prohibit entering the code for the next 40 minutes. The factory setting for PIN 1 is 11 (1111). AUTOMATIC RETURN TO THE ARMED MODE The system has the ability to automatically return to the armed mode within 30 seconds if, after disarming, the door, hood, trunk were not opened or the ignition was turned on. The system warns of automatic arming with alarms and siren* every 10 seconds. Programmable function 1-5 (see page 78) allows you to select automatic arming with or without locking the doors, as well as completely disabling this service. * The presence of siren signals is determined by the value of programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Siren chirps off" on page 38). SEARCH FOR A CAR To search for a car in a parking lot, briefly press button I on the keyfob in armed mode. The system will emit five short siren chirps and ten flashes of warning lights. In this case, the key fob will give out one sound signal. HANDS-FREE FUNCTION By pressing the buttons II+III of the keyfob-communicator for 2 sec. in the "disarmed" mode, you can enable or disable the "Hands Free" function. When the Hands-Free function is enabled, the system will automatically arm and lock the doors when you move away from the car with a key fob-communicator and disarm and unlock the doors when you approach. Switching on and off the security mode will be accompanied by a melodic signal from the key fob-communicator. The "Hands free" function has two modes of operation: 1. The symbol is minimal. does not blink on the display, and the range is SCHER-KHAN MAGICAR 12 2. Symbol maximum. flashes on the display, and the operating range - The change of operating modes takes a long 2 seconds. by pressing buttons II+III of the keyfob-communicator in the following order: (Function disabled) > (Function enabled, mode 1) > (Function enabled, mode 2) > (Function disabled), etc. When the Hands Free function is enabled: SIREN BEEP: One beep* ALARM: Flashes once LED: According to the system status Headlights flash five times, lock icon flashes five times, DISPLAY screen: Hands free symbol appears KEY FOB ALARM: One short beep When Hands Free is turned off: SIREN ALARM: Two beeps* ALARM: Flashes twice LED: According to system status Headlights flash five times, lock icon flashes five times, on-screen DISPLAY: disappears Hands-free mode symbol KEY FOB SIGNAL: Two short beeps 33 34 OPERATION MANUAL Note: The Hands-free function can only be activated in the disarmed mode in the immediate vicinity of the vehicle. The distance from the key fob-communicator to the car, at which the system makes a decision to arm or disarm, may vary and depends on a number of objective reasons: the relative position of the antenna of the key fob-communicator and the antenna unit, the presence of metal objects near the antennas, radio interference on the air, weather and so on. ATTENTION! The “Hands Free” function works only when using a keyfob-communicator with a liquid crystal display; when using additional keyfobs without a display, this function is not available. The Hands Free feature is not available in Battery Save Mode. Continuous use of the "Hands Free" function will significantly shorten the battery life of the key fob. The system will not automatically disarm in Hands Free mode if two-step disarming is enabled (programmable feature 1-9, see page 79). TRUNK OPEN [BUTTON (III)–] The system has the ability to remotely open the car's trunk. To implement this function, it is necessary that the appropriate connections and settings are made during system installation. The possibility of implementing this function should be clarified with a system installation specialist. Press and hold for 2 sec. key fob button III, after which the trunk will open. If at this moment the system is armed, it will be disarmed (with the locks unlocked), the blocking will be disabled. Using programmable function 1-1 (see page 76), it is possible to implement disarming without unlocking door locks when remotely opening the trunk. It is also possible to remotely open the trunk without disarming the system, without light and sound alarms, in which the trunk trigger, shock sensor and additional sensor are temporarily disabled. In the latter case, the protection of the disabled zones is resumed after the trunk is closed. SCHER-KHAN MAGICAR 12 When opening the trunk: SIREN SIGNAL: Two beeps* ALARM: Flashes twice* LED INDICATOR: According to the system status Vehicle headlights flash five times, lock symbol flashes five times. DISPLAY: Boot lid open icon flashes for 5 seconds. KEY FOB SIGNAL: Two short beeps * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Siren chirps silence" on page 38), and the presence of alarm signals is determined by programmable functions 1-1 and 2-1 (see pages 76 and 86). Note: If after the command "open the trunk with disarming the system" the trunk was not opened, after 30 seconds. automatic reset will occur regardless of the status of function 1-5 (see page 78). STATUS CHECK [IV BUTTON] If you need to check the system status, use a short press of the IV button on the key fob. Information about the state of the system will be shown on the keyfob-communicator display and confirmed by siren and alarm signals. 35 36 OPERATION MANUAL When checking the system status: System status Armed, engine not running Disarmed, engine not running Armed, engine running Disarmed, engine running Key fob signal Three short beeps Two short beeps Three double beeps Two double beeps Siren tone* (alarm) One short beep Two short beeps Three short beeps Four short beeps » on page 38). When checking the status of the system, the indication of the current time is replaced by the temperature value in the passenger compartment. The second short press of the button IV of the keyfob-communicator within 6 seconds. after the first allows you to view information about the voltage of the car's battery in volts. SCHER-KHAN MAGICAR 12 The third short press of the button IV of the keyfob-communicator within 6 seconds. after the second one allows you to view information about the voltage of the keyfob-communicator battery in volts. PANIC MODE OR JACKSTOP™ [BUTTON (I)–] the system will enter Panic mode (if the engine is not running) or JackStop™ mode (if the engine is running). If the system has been disarmed, it will be armed and the door locks will be locked. The siren will sound for 90 seconds, the alarm will flash for 90 seconds. After 90 sec. the system will go into armed mode until it is disarmed by a key fob or by a mode emergency shutdown. Panic and JackStop™ modes can be stopped by briefly pressing button I or II. Panic and JackStop™ modes are used in case of danger or when it is necessary to draw attention to the car. The operating mode of the built-in engine blocking relay and the external blocking relay control output depends on the value of the programmable function 2-6 (see page 86). In JackStop™ mode, Programmable Function 2-6 determines the instantaneous (if starter inhibit is selected) or progressive (if ignition inhibit is selected) behavior of the inhibit relay. 37 38 OPERATING MANUAL In Panic and JackStop™ mode: SIREN BEEP: Alarm 90 sec.* ALARM: Flashes 90 sec.* LED: Will flash 1 time per second. Vehicle headlights, closed symbol DISPLAY: padlock, PANIC flash for 30 sec. KEY FOB SIGNAL: No signals * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Siren siren muting" on page 38), and the presence of alarm signals is determined by the value programmable function 2-1 (see page 86). ATTENTION! The JackStop™ mode can only be used in emergency situations. Since it involves stopping the engine while driving, in some cases this can be dangerous. SIREN SIGNAL MUTE [BUTTONS (I+II)] Short simultaneous pressing of the remote control buttons (I+II) can turn the siren signals on or off. Depending on the status of the programmable function 1-3 (see page 77), either confirmation and warning signals sirens, or all siren alarms, or siren alarms only. In this case, the key fob signals will be present, as usual. The indication of the siren signals turning off is the absence of a symbol on the key fob display. SCHER-KHAN MAGICAR 12 When the siren sounds on: SIREN SIGNAL: Two beeps ALARM: Flashes twice LED: According to the system status Siren on indicator will appear on the screen. Headlights DISPLAY: flash five times, lock icon flash five times KEY FOB BEEP: Two short beeps When the siren is turned off: SIREN BEEP: No signal ALARM: Flash once LED: According to system status Siren on indicator will disappear from the screen. Headlights DISPLAY: flash five times, lock icon flash five times KEY FOB BEEP: One short beep VALET MODE [BUTTON(I+III)] To disable security functions system, for example, when transferring the machine to a service station for service, you can use the VALET mode. To do this, in the "disarmed" mode, briefly press the buttons (I + III) of the key fob. In VALET mode, you can control the locking and unlocking of the door locks. To lock or unlock the locks, briefly press button I or II respectively. In VALET mode, trunk lock control, control of additional channels No. 1 and No. 2 from the key fob and system operation in Turbo mode are also available. The VALET mode is indicated on the display by the symbol and the blue LED of the owner's call sensor is constantly lit. 39 40 OPERATING MANUAL When VALET mode is activated: SIREN SIGNAL: One beep* ALARM: Flashes once LED INDICATOR: Steady on Lights flash five times, DISPLAY: lock flashes five times, VALET mode symbol appears on the screen KEY FOB SIGNAL: One short beep To exit the VALET mode, briefly press the buttons (I + III) of the key fob. When VALET mode is turned off: SIREN BEEP: Two beeps* ALARM: Flashes twice LED: No tone You can also use the multifunctional button on the call sensor body to turn off the VALET mode. To enable the VALET mode without using the key fob: 1. In the "disarmed" mode with the ignition on, press the VALET button on the call sensor housing for 2 seconds. The alarm will flash once. 2. Within 5 sec. briefly press the VALET button. Alarm will flash twice if SCHER-KHAN MAGICAR 12 is not used personal code PIN 1 (programmable function 1-8 at factory setting, see page 79), or once if PIN 1 is used (programmable function 1-8 at optional value). 3. If PIN 1 is used, then it is necessary to enter its value, see "Using a personal PIN 1 code" points 5 to 6 on page 64. 4. Within 5 sec. briefly press the VALET button. You will hear one siren* and the alarm will flash once. The system will enter VALET mode. To turn off the VALET mode without using the key fob: With the ignition on, press the VALET button on the call sensor housing for 2 seconds. You will hear two siren sounds* and the alarm will flash twice. The system will switch from VALET mode to full function mode. * The presence of siren signals is determined by the value of programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Siren chirps off" on page 38). ATTENTION! When transferring the vehicle to service maintenance set the system to VALET mode. Do not give key fobs from the system to service station personnel when maintenance car. Subsequently, such measures will save the car from theft. TURNING THE SHOCK SENSOR ON AND OFF [BUTTONS (I+IV)] You can disable the two-level shock sensor and the auxiliary sensor. At the same time, shortly press the buttons (I + IV) of the key fob, as a result, the sensor will be turned off or on. The indication of the sensor disconnection is the presence of a symbol on the key fob display. Switching off the sensor is necessary if you leave the car where false alarms are possible, for example, on a busy street. 41 42 OPERATION MANUAL When the shock sensor is disabled: SIREN SIGNAL: One beep* ALARM: Flashes once LED: According to the system status The shock sensor disable icon will appear on the screen. Headlights DISPLAY: flashes five times, lock icon flashes five times KEY FOB BEEP: One short beep When the shock sensor is activated: SIREN BEEP: Two beeps* ALARM: Flashes twice LED: According to the system status Disable symbol will disappear from the screen DISPLAY: shock sensor. The headlights will flash five times, the image of the lock will flash five times KEY FOB SIGNAL: Two short beeps The shock sensor is called two-level, because it has two levels of response from the impact on the car. In the event of a minor impact to the vehicle body, the system warns with 4 short siren sounds* and 4 hazard flashes or only 4 short siren sounds*, depending on the status of programmable function 1-16 (see page 83). The keyfob communicator emits a short tone signal, the symbol flashes on the display. If the impact is strong, the system goes into alarm mode for 10 seconds. SCHER-KHAN MAGICAR 12 * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Siren signal mute" on page 38). AUTOMATIC DOOR LOCK CONTROL WHEN THE IGNITION IS ON AND OFF, WHEN THE ENGINE IS RUNNING, OR WHEN SPEEDING UP Using the programmable function 1-2 (see page 76), you can turn on or off automatic control central locking when the ignition is turned on and off, when the engine is running or when accelerating. If programmable function 1-2 is set to 2, then the door locks will be automatically locked after 5 seconds. after the ignition is turned on, provided that all doors and trunk are closed. The programmable function 1-2 in value 3 allows, after starting the engine, to lock the door locks when a generator signal appears or the threshold value tachometric signal, if the appropriate connections were made when the system was installed and the tachometric signal value was programmed (see "Programming the tachometric signal" on page 69). The programmable function 1-2, set to 4, ensures that the locks are locked when the speed exceeds 10 km/h (to implement this function, it is necessary to connect the processor unit to the car's CAN data bus). The possibility of implementing this function should be clarified with a system installation specialist. Locking the locks by ignition or generator signal is possible once from the moment the engine is started. The locks are unlocked immediately when the ignition is switched off. The presence of a symbol on the keyfob display serves as an indication of the enabled state of the function. MODE "TURBO" If the car has an engine equipped with a turbine, then after a long work on high revs it is not recommended to stop it immediately. The engine should idle for some time to cool the turbine. For this, the SCHER-KHAN MAGICAR 12 system has a Turbo mode. To implement this function, it is necessary that the appropriate connections and settings are made during system installation. If the Turbo mode is enabled, the engine will continue to run after the ignition is turned off. Using programmable function 2-28 (see page 89) you can choose between 2.4 minutes of Turbo operation or an auto-determined range of 2 to 4 minutes depending on the engine RPM for the last 5 minutes. The "Turbo" mode with auto-detected run time can only be realized if engine control by tachometer signal has been selected and a tachometer signal value has been programmed (see "Programming the tachometer signal" on page 69). The indication of the use of the "Turbo" mode is the presence of a symbol on the key fob display. Using the programmable function 1-12 (see page 81) you can choose the way the Turbo mode is activated: , provided that the parking brake is applied, the hood is closed, the brake pedal is not depressed. If the value 2 of the programmable function 1-12 is set, the interception of ignition at the moment of switching on the "Turbo" mode is carried out by double short pressing the key fob button II, provided that the parking brake is on, the hood is closed, the brake pedal is not pressed. If the value 3 of the programmable function 1-12 is set, the ignition interception at the moment the Turbo mode is turned on will occur automatically when the ignition is turned off, provided that the parking brake is on, the hood is closed, the brake pedal is not pressed. If the value 4 of the programmable function 1-12 is set, the ignition interception at the moment of switching on the "Turbo" mode will occur automatically by SCHER-KHAN MAGICAR 12 when the door is opened, provided that the parking brake is on, the hood is closed, the brake pedal is not pressed. To turn on the Turbo mode at the end of the trip, do the following: 1. With the engine running, put the gear lever in the neutral or P (Park) position. 2. Apply the parking brake. Release the brake pedal. 3. Carry out ignition interception according to the value of programmable function 1-12. Turn the ignition key from the ON position to the OFF position. The engine will continue to run after this set time, the warning light will flash once every 5 seconds (depending on programmable function 1-16, see page 83). When Turbo mode is enabled: BELL SIGNAL: No signal Blinks 1 time per ALARM: 5 sec. (programmable function 1-16, see page 83) LED: According to system status Vehicle headlights flash five times, smoke and mode symbols flash DISPLAY: Turbo, countdown to end of Turbo mode starts BEEP KEY FOB: Two double beeps Note: The Turbo mode can only be activated with the parking brake applied, the brake pedal not depressed and the hood closed. Activation of the "Turbo" mode is possible once from the moment of activation of the parking brake and not earlier than after 30 seconds. after starting the engine. If the starter lock is used, the activation of the "Turbo" mode will be accompanied by the activation of the starter lock. You can arm the system in Turbo mode. To do this, get out of the car, close all doors, trunk and briefly press button I on the key fob. The system will go into armed mode, the door locks will be locked, the starter interlock will be enabled until the system is disarmed and the Turbo mode ends. The ignition lock will not be activated until the end of the engine operation or until the start of an alarm. Arming the system with the engine running with the car's standard key fob in SLAVE mode may not be available and depends on the characteristics of a particular car. When arming: SIREN SIGNAL: ALARM: One beep* Flash once* arming, LED indicator will start: After flashing at a rate of 1 time per second, a closed padlock symbol will appear, vehicle headlights will flash five times, DISPLAY: smoke symbol will continue to flash and “Turbo” mode, the time is counting down until the end of the “Turbo” mode. KEY FOB SIGNAL: Three double signals Turning on the sensors: After the LED starts flashing, the system will start monitoring the status of the doors, hood, trunk, brake pedal. In the case of using the cabin light delay accounting, the SCHER-KHAN MAGICAR 12 door triggers will be armed after the set time has elapsed (programmable function 2-2, see page 86). The shock sensor and the additional sensor will turn on after 30 seconds. after stopping the engine. Note: If you heard three additional siren sounds* while arming, the alarm flashed three times*, and the display for 5 seconds. the open door icon flashes, this means that the car door is open. If you hear four additional siren sounds*, the alarm will flash four times* and the display will display for 5 seconds. If the trunk image flashes, it means that the trunk is open in the car. In this case, the system will arm and bypass the activated sensor. Disabled sensors will be immediately armed when their functionality is restored. Signals about bypassing the door sensors will not follow if the 2-2 function is activated, but if the door is open at this moment, then within 5 seconds. the open door symbol will flash on the display. * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Mute the siren signals" on page 38), and the presence of alarm signals is determined by the value of the programmable function 2-1 (see page 86). To turn off the Turbo mode in an emergency, press the keyfob button II for 2 seconds. When Turbo mode is turned off in an emergency: BELL: Two beeps* ALARM: Shut down LED: According to system status Vehicle headlights and lock symbol flash five times, stop flashing DISPLAY: Turbo mode symbol, smoke symbol disappears, the Turbo mode countdown will end KEYFOB SIGNAL: One double beep 47 48 OPERATING MANUAL Note: Turbo mode will end immediately when the alarm mode is activated, the parking brake is released, the hood is opened, or the brake pedal is pressed. CALLING THE CAR OWNER If you need to call the car owner, tap with a hard object (coin, keys, etc.) twice within 1.5 seconds. near the owner's call sensor or briefly press the button on its body twice. The call sensor LED will glow blue for 3 seconds if the system is armed at that moment. The function of calling the owner of the car is available in any of the armed modes and in the disarmed mode with the ignition off. To stop the signals from the keyfob-communicator and check the condition of the car, briefly press the IV button. When calling the owner of the car: SIREN SIGNAL: ALARM: No signals No signals on 3 sec., in LED INDICATOR mode: Always guarded The call sensor symbol flashes in the DISPLAY: for 10 sec. Intermittent signal for 10 sec. KEY FOB SIGNAL: Then short beeps 1 time every 6 sec. (reminder mode) Note: You can turn off the owner call function in the key fob function programming menu, see page 16. SСHER-KHAN MAGICAR 12 ADDITIONAL CHANNEL NO. electromechanical lock hood, power window module, preheater or other service equipment, you can control the operation of these devices using a key fob if the appropriate connections and settings are made during system installation. To do this, press the keyfob button IV for 2 seconds. A signal of the set duration will appear at the output of additional channel No. 1 of the processing unit (programmable function 2-8, see page 87). Auxiliary channel activation: SIREN ALARM: One beep* ALARM: Flashes once LED: According to system status Headlights flash five times, DISPLAY: lock image flashes five times, auxiliary channel number is displayed at the output of additional channel No. 1, press the button IV of the key fob for 2 seconds. Auxiliary channel shutdown: SIREN BEEP: Two beeps* ALARM: Flashes twice LED: According to system status Headlights flash five times, image DISPLAY: Lock flashes five times KEY FOB SIGNAL: Two short beeps 49 50 siren is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Silence of siren signals" on page 38). ADDITIONAL CHANNEL NO. 2 CONTROL [BUTTONS (II+III)] If your car is equipped with an electromechanical hood lock or other service equipment, you can control the operation of these devices using a key fob if the appropriate connections and settings are made when installing the system. To do this, briefly press the buttons (II + III) of the key fob. A signal of the set duration will appear at the output of additional channel No. 2 of the processor unit (programmable function 2-9, see page 87). Auxiliary channel activation: SIREN ALARM: One beep* ALARM: Flashes once LED: According to system status Headlights flash five times, DISPLAY: lock image flashes five times, auxiliary channel number is displayed at the output of additional channel No. 2, briefly press the buttons (II + III) of the key fob. Auxiliary channel shutdown: SIREN BEEP: Two beeps* ALARM: Flashes twice LED: According to the status of the SCHER-KHAN MAGICAR 12 system DISPLAY: KEY FOB BEEP: Headlights flash five times, lock symbol flashes five times Two short beeps * Alarms present siren is determined by the value of the programmable function 1-3 (see page 77) and the I+II button combination (see "Silencing Sirens" on page 38). ADDITIONAL CHANNEL #6 CONTROL [BUTTON (III)-] Additional channel #6 is implemented as a built-in relay. This allows the channel to be used for direct trunk lock control, provided Programmable Function 2-21 is set to factory default (see "Trunk Open" on page 34). The channel can also be used for remote control of power devices (load current should not exceed 10 A). In this case, the programmable function 2-21 must be in the 2nd value. Turning on the channel is accompanied by turning off the shock sensor and the additional sensor for the entire time the channel is active. The channel active time is determined by programmable function 2-13. Auxiliary channel activation: SIREN BEEP: One beep* ALARM: Flashes once* LED: According to system status Headlights flash five times, DISPLAY: lock image flashes five times, auxiliary channel number is displayed KEY FOB ALARM: One short beep 51 52 OPERATING MANUAL * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Disabling the siren signals" on page 38), and the presence of alarm signals is determined by the value of the programmable function 2-1 (see page 86). The implementation of additional channel No. 6 in the form of a built-in relay allows you to use it also to simulate pressing the brake pedal when the starter is turned on during automatic engine start. Such a need may arise on some car models when implementing automatic engine start. The use of a channel in this capacity is possible by setting programmable function 2-21 to 3 value. The operation of additional channel No. 6 can also be determined by the CAN module built into the system. In this case, its purpose depends on the program selected in the CAN module. The ability to control additional channel No. 6 exclusively using the CAN module provides setting the programmable function 3-7 to an optional value (see page 90). REMOTE ENGINE START [BUTTON (II)-] WARNING! The automatic engine start functions become available only if all the necessary connections have been made during installation of the system and the appropriate values ​​​​of the programmable functions have been set. To start the engine, press button II on the key fob for 2 seconds. The system will be armed, the door locks will be locked, the car engine will start. After the engine has started, the remote control display will start counting down the time remaining until the end of the engine operation in automatic mode. Engine run time is programmable and can be 5, 15, 25 or 45 minutes (programmable function 1-7, see page 79). At start up: SIREN SIGNAL: ALARM: One beep* SCHER-KHAN MAGICAR 12 will flash once According to system status. after the system is armed LED INDICATOR: After arming, it will start flashing at a frequency of 1 time per second The headlights will flash five times, the image DISPLAY: the lock will flash five times KEY FOB SIGNAL: One short beep parking brake, hood closed, doors, trunk, brake pedal not pressed. For vehicles with a manual transmission, the launch reservation procedure (see page 55) must first be carried out. See page 57 for more information about the reasons preventing the engine from starting automatically. If it does not start the first time, the system will try again. The system makes no more than three attempts to start after receiving a command from the key fob. Starting the engine will be accompanied by the activation of the starter interlock. The ignition lock is automatically disabled for the duration of the engine operation in automatic mode. On successful startup: SIREN BEEP: ALARM: Two beeps* Flashes twice, flashes or does not work (Depends on programmable function 1-16, see page 83) 53 54 OPERATION MANUAL According to system status. after the system is armed LED INDICATOR: After arming, will flash at a frequency of 1 time per second Headlights will flash five times, the smoke symbol will flash, the reverse will begin DISPLAY: countdown of the time remaining until the end of the engine operation KEY FOB SIGNAL: Three double beeps Switch on sensors : After the LED starts flashing, the system will monitor the status of the doors, hood, trunk, brake pedal. The shock sensor and the additional sensor are disabled in the remote start mode and will turn on only after 30 seconds. after stopping the engine. In order to start driving the car, you need to turn off the security, open the door, insert the ignition key into the lock, turn it to the ON position, press the brake pedal and turn off the parking brake. In this case, the automatic start mode will be turned off and the engine will continue to operate from the ignition switch. Note: Vehicles with keyless ignition circuit control may automatically shut down the engine, after which the engine will need to be started in the normal way. To remotely stop the engine, press button II on the key fob for 2 seconds. The system will remain armed and after 30 seconds. after the engine stops, it will start to control the shock sensor and an additional sensor. When the engine is stopped: SIREN ALARM: Two beeps* ALARM: Flashes twice LED: According to the status of the SCHER-KHAN MAGICAR 12 system DISPLAY: KEY FOB ALARM: Headlights flash five times, lock symbol flashes five times, smoke symbol disappears, stops countdown of the time remaining until the end of the engine operation Two beeps * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Siren chirps silence" on page 38). Note: The operation of the engine in the remote start mode in armed mode will immediately end when the alarm goes into alarm mode, the parking brake is released, the hood, trunk, doors are opened, and the brake pedal is pressed. One minute before the end of the engine operation time in automatic mode, the key fob will give two short beeps. RESERVE MODE OF AUTOMATIC ENGINE START FOR MANUAL TRANSMISSION The backup mode is used only for a manual transmission and excludes the possibility of automatic engine start if the gear lever is not in the neutral position. The symbol (continuous glow) on the keyfob-communicator display means that the reservation has been made and automatic engine start is possible. Programmable function 1-12 (see page 81) allows you to select one of four redundancy algorithms. Algorithm 1 (value 1 of programmable function 1-12): 1. At the end of the trip, without turning off the engine, set the gear lever to neutral position. 2. Apply the parking brake. Take your foot off the brake pedal. 3. Turn the key in the ignition switch from the ON position to the OFF position and remove the key from the ignition switch. The system will intercept the ignition provided that the doors are closed. The engine will continue to run for 2 minutes. 4. Within 2 min. open the door and get out of the car. 55 56 OPERATOR'S MANUAL 5. Close the door. The engine will stop (see "Note" below) unless "Turbo" mode is enabled (Function 2-28 in optional value, see page 89). Algorithm 2 (value 2 of programmable function 1-12): 1. At the end of the trip, without turning off the engine, set the gear lever to neutral position. 2. Apply the parking brake. Take your foot off the brake pedal. 3. Briefly press button II on the key fob twice. The system will intercept the ignition. 4. Turn the key in the ignition switch from the ON position to the OFF position and remove the key from the ignition switch. The engine will continue to run for 2 minutes. 5. Within 2 min. open the door and get out of the car. 6. Close the door. The engine will stop (see "Note" below) unless "Turbo" mode is enabled (Function 2-28 in optional value, see page 89). Algorithm 3 (value 3 of programmable function 1-12): 1. At the end of the trip, without turning off the engine, set the gear lever to neutral position. 2. Apply the parking brake, release the brake pedal. 3. Turn the key in the ignition switch from the ON position to the OFF position and remove the key from the ignition switch. The system will intercept the ignition regardless of the state of the doors. The engine will continue to run for 2 minutes. 4. Within 2 min. open the door and get out of the car. 5. Close the door. The engine will stop (see "Note" below) unless "Turbo" mode is enabled (Function 2-28 in optional value, see page 89). Algorithm 4 (value 4 of programmable function 1-12): 1. At the end of the trip, without turning off the engine, set the gear lever to neutral position. 2. Apply the parking brake. Take your foot off the brake pedal. 3. Open the door. The system will intercept the ignition. 4. Turn the key in the ignition switch from the ON position to the OFF position and remove the key from the ignition switch. The engine will continue to run for 2 minutes. 5. Within 2 min. get out of the car and close the door. The engine will stop (see "Note" below) unless "Turbo" mode is enabled (Function 2-28 in optional value, see page 89). SCHER-KHAN MAGICAR 12 Note: Depending on the state of the programmable function 1-13 (see page 81), the backup algorithm must be completed by: 2-minute backup mode interval. closing the door with the trunk closed, followed by automatic arming (1-13 in the value 2). Engine standby operation will immediately end when the parking brake is released, the hood is opened, and the brake pedal is depressed. Opening the door, hood, trunk, turning off the parking brake, depressing the brake pedal after making the reservation will make it impossible to automatically start the engine. ATTENTION! Close the sunroof and windows before leaving the vehicle. Leave the gear lever always in the neutral position. Do not leave people or animals in the vehicle when the reservation mode is being executed. Do not start the engine automatically if there are people or animals in the car. Do not use automatic engine start in open top vehicles. If the operation of the redundancy mode differs from the described algorithms, immediately contact a service station for advice. Until the cause is removed incorrect operation do not use automatic engine start. DIAGNOSTICS OF THE REASONS FOR FAIL AUTOMATIC ENGINE START If automatic engine start is not possible, then when button II of the keyfob is pressed for 2 seconds, the keyfob-communicator will give a triple beep, and the display will show information about the reason that caused the failure to perform automatic engine start, indicating the error code. The siren will give three short beeps, the alarm will flash three times and after a three-second pause, the number of flashes will indicate the reason preventing the start. 57 58 OPERATING MANUAL So, for example, if automatic engine start is not possible due to an open door, the following information will appear on the key fob-communicator display: Reasons preventing starting: Cause Error code Alarm signal Engine running Ignition on Door open Hood or trunk open Not done start reservation for manual transmission Parking brake applied Brake pedal applied No tachometer value programmed 01 02 03 04 05 Flash once Flash twice Flash three times Flash four times Flash five times 06 07 08 Flash six times Flash seven times Flash eight times INSTALLATION TIMER FOR AUTOMATIC ENGINE START [BUTTONS (II + IV)] Use a short press of the buttons (II + IV) of the remote control to turn the engine start on or off by timer. The indication of the inclusion of starting the engine by timer is the presence of a mark on the key fob display. SCHER-KHAN MAGICAR 12 The system provides four modes of starting the engine by timer. The first mode allows you to start the engine every day at a predetermined time, the second mode allows you to start the engine periodically every 8 hours, the third - every 4 hours, the fourth - every 2 hours to warm up (or cool down the interior in regions with a hot climate). The two modes cannot be used at the same time. The mode you need can be selected using programmable function 1-10 (see page 80). To automatically start the engine according to a timer at a certain time (24 hours), you must set the desired start time using the communicator key fob: 1. Briefly press the buttons (II + IV) and turn off the label if the mode was previously activated 2. Select the start time (to set the required time to start the engine by timer, follow the procedure described in paragraph "Setting the key fob-communicator" on page 15 of this manual) 3. Briefly press the buttons (II + IV) and turn on the label To enable automatic start of the engine by timer every 8, 4 or 2 hours, setting the exact start time is not required, a short press of the buttons (II + IV) of the key fob is enough. The first start of the engine will occur after switching on the mode after 8, 4 or 2 hours, respectively. When timed engine start is enabled: SIREN BEEP: One beep* ALARM: Flashes once LED: According to system status alarm When timed engine start is turned off: SIREN BEEP: Two beeps* ALARM: Flashes twice LED: According to system status Vehicle lights and lock symbol DISPLAY: Flashes five times, timer symbol disappears KEY FOB ALARM: Two beeps * Alarms present siren is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Silence of siren signals" on page 38). ATTENTION! Starting the engine by timer is possible only in armed mode. Setting the exact value of the current time is a prerequisite for the correct operation of the automatic engine start according to the 24-hour timer. Engine start time according to the "24 hours" timer can be shifted up to ± 2 min. per day. ENGINE START BY SIGNAL OF AN EXTERNAL DEVICE To improve the convenience of using the automatic engine start function, the system has an external engine start connector. This connector allows you to connect external GSM devices, additional temperature sensors with a large number of threshold values, etc. The engine starts when a signal is received at the external start input, only when the system is armed and automatic start is enabled. If the engine is already running in any automatic mode, then the appearance of a signal at the external start input of SCHER-KHAN MAGICAR 12 turns off the engine (automatic mode ends). This feature must be taken into account if several control sources for automatic engine start are used. LIMITING THE NUMBER OF AUTOMATIC STARTS The system provides the ability to limit the number of consecutive automatic starts by timer. By means of the programmable function 1-11 (see page 80) it is possible to limit the automatic starts to 16th, 7th, 5th or not to limit at all. The countdown of the number of consecutive starts will start from the moment of the first automatic start of the engine by the timer. LIMITING THE NUMBER OF TIMER STARTS BY TEMPERATURE AND BATTERY VOLTAGE When starting the engine by timer, the temperature in the passenger compartment can be taken into account. To do this, set programmable function 1-15 (see page 83) to any suitable value: 2 (-15°C), 3 (-25°C), 4 (60°C). When the temperature threshold is reached by the time interval defined by programmable function 1-10 (see page 80) has elapsed, the engine will automatically start. The indication of the inclusion of the temperature control mode during timed starts is the display of a symbol on the key fob display. Similarly, setting programmable function 1-14 (see page 82) to 2 will control the on-board voltage. If the battery draws below 11.5 V by the time interval defined by the programmable function 1-10 (see page 80) has expired, the engine will automatically start. The indication of the activation of the voltage control mode during timer starts is the display of a symbol on the key fob display. DISARMING THE SYSTEM WITHOUT A KEY FOB AND APPLYING A PERSONAL CODE Access to a car without a key fob may be required in a number of cases. For example, if the key fob is lost or if the battery in the key fob is dead. The SCHER-KHAN MAGICAR 12 system provides such an opportunity. Access to the car without a key fob, without entering a personal code 61 62 OPERATOR'S MANUAL code is possible only if the programmable function 1-8 (see page 79) is in the factory setting. To do this: 1. Open the car door with the key. The system will go into alarm mode. 2. Turn on the ignition. The engine does not need to be started. 3. Press the button on the call sensor body (VALET) for 2 seconds. The alarm will flash once. The alarm mode will stop. 4. Within 5 sec. briefly press the VALET button. The siren will sound twice*. The alarm will flash twice*. 5. The system will disarm. * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Mute the siren signals" on page 38), and the presence of alarm signals is determined by the value of the programmable function 2-1 (see page 86). DISARMING THE SYSTEM WITHOUT A KEYFOB USING A PIN 1-CODE If you want to use a personal code to disarm the system in the absence of a keyfob, to record codes for new keyfobs, as well as in the two-step disarming mode, then you need to write a personal code PIN 1 into the system , consisting of two or four digits (depending on the selected value of the programmable function 1-8, see page 79). Each digit of the code can have a value from 1 to 4. Thus, the code can have a value from 11 to 44 and from 1111 to 4444. The code is entered using a button on the call sensor housing. Recording a personal PIN 1-code: 1. 2. 3. 4. Disarm the system Open the door and leave it open Switch on the ignition. At the same time, the engine does not need to be started. To enter the personal code recording mode, simultaneously press and hold for 2 seconds. buttons (III + IV) of the key fob. The system will confirm entering programming mode with one siren and one alarm flash. If you heard three siren sounds* and saw three alarm flashes, it means that the system has not entered programming mode. The SCHER-KHAN MAGICAR 12 5. 6. 7. 8. 9. system will not enter the programming mode if it is armed, the ignition is turned off, the doors are closed or the user value of the function 1-8 is not set. To enter the first digit of the code within 4 sec. briefly press one of the keyfob buttons. The number of the pressed button will then correspond to the first digit of the personal code. The system will confirm the selected digit with the appropriate number of siren sounds and alarm flashes. To enter the second digit of the code within 4 seconds. briefly press one of the keyfob buttons. The number of the pressed button will then correspond to the second digit of the personal code. The system will confirm the selected digit with the corresponding number of siren sounds and alarm flashes. To enter the third digit of the code (when using a 4-digit PIN 1 code) within 4 seconds. briefly press one of the keyfob buttons. The number of the pressed button will then correspond to the third digit of the personal code. The system will confirm the selected digit with the corresponding number of siren sounds and alarm flashes. To enter the fourth digit of the code (when using a 4-digit PIN 1 code) within 4 seconds. briefly press one of the keyfob buttons. The number of the pressed button will then correspond to the fourth digit of the personal code. The system will confirm the selected digit with the corresponding number of siren sounds and alarm flashes. After entering the last digit (depending on the selected value of the programmable function 1-8, see page 79) of the personal code, the system will exit the programming mode. To confirm exit from the programming mode, the system will sound two siren and alarm signals * The presence of siren signals is determined by the value of the programmable function 1-3 (see page 77) and the combination of buttons I + II (see "Disabling siren signals" on page 38 ). Using a personal PIN 1 code to disarm the system without a key fob: 1. Open the car door with the key. The system will go into alarm mode 63 64 OPERATING MANUAL 2. Switch on the ignition. In this case, the engine does not need to be started. 3. Press the button on the call sensor housing (VALET) for 2 seconds. The alarm will flash once. The alarm mode will stop 4. Within 5 sec. briefly press the VALET button. The alarm will flash once. The LED will start flashing rapidly 5. While the LED is flashing rapidly for 4 sec. press the button on the call sensor case the number of times corresponding to the first digit of the code. The time between presses must be less than 1.5 seconds. After 4 sec. the alarm will flash once to confirm the entry of the first digit of the code. The LED will flash quickly 6. Repeat step 5 for the remaining digits of the code. PIN 1-code can consist of two or four digits (depending on the selected value of the programmable function 1-8) 7. If the code was entered correctly, the siren will sound two short sounds *, the alarm will flash twice *. The system will disarm . If the code was entered incorrectly, the system will return to the alarm mode * The presence of siren signals is determined by the value of the programmable function 1-3 (see. p. 77) and the I+II button combination (see "Siren Silence" on page 38), and the presence of alarms is determined by the value of the programmable function 2-1 (see p. 86). ATTENTION! Recording and subsequent entry of PIN 1 code is possible only if the programmable function 1-8 is in the optional value. If the PIN 1 emergency stop code is entered incorrectly three times, the system will prohibit entering the code for the next 40 minutes. or until you disarm the system using the key fob. The factory setting for the PIN 1 code is 11 (1111). ACCESS TO THE CAR WITHOUT A KEY FOB USING A PIN 2-CODE The SCHER-KHAN MAGICAR 12 system allows you to arm and disarm the system without using a key fob using the owner's call sensor. To do this, you need to select the value 2 of the programmable function 1-19 (see page 84) and write down the personal code PIN 2, consisting of four SCHER-KHAN MAGICAR 12 digits. The value of each digit of the code can vary from 1 to 9. Thus, the code can have a value from 1111 to 9999. The code is entered and recorded using the call sensor of the car owner. There is no factory setting for PIN 2. Recording a personal PIN 2-code: 1. 2. 3. 4. Disarm the system Open the door and leave it open Switch on the ignition. The engine does not need to be started. Tap the call sensor 10 times.