The transformation of a "loaf" into a "tadpole"

Modification of a personal car, its cab and power units, in the process of which the factory characteristics are improved, is called tuning. What does it do?

1. The power and efficiency of the engine are increased.
2. The reliability of the brakes is ensured.
3. The pendants are being strengthened.
4. The cab becomes comfortable for the driver and passengers.

A good car platform at an affordable price creates an opportunity to experiment, improving the car's cross-country ability and strengthening its driving performance. UAZ 3303 "tadpole" (as it is called by the people for its peculiar shape) is easy to tune.

You can improve the UAZ 3303 with your own hands. Tuning is very easy to do in your own garage. Of course, you need some knowledge about the design of the car. You can tune the chassis, appearance and, if you wish, improve the interior of the UAZ 3303.

Start at the wheelbase

It is recommended to strengthen the suspension so that you can drive off-road without fear of the car falling apart. Swap out tires for similar but more durable oversized tires (up to 25 inches) that are specially made to tackle mud obstacles. Raise the car body, this is necessary for an accurate fit of the wheels. Install stands between structures, and if necessary, trim the wings of the arch. Cab protection with a windbreaker is a necessary part of car tuning, which allows you to protect UAZ 3303 lighting and glass devices from all kinds of damage.

The readiness of the car for complete off-roading is determined by the mandatory presence of a winch. It is attached to the front or rear of the machine. Electric or hydraulic is preferred. The advantage of the latter option is its power, the work is carried out by the engine, which builds up pressure. The electric analog is powered by a battery, and the service life of the latter is reduced.

Great car for the countryside

When it comes to the UAZ "tadpole", tuning is most often subjected to its chassis and interior, and not its appearance, although no one forbids changing the body design.

The upgrades will allow the car to compete with the powerful SUV. To do this, it is necessary to change the factory bridges to the Bars ones, which are wider in width, as well as replace and install a high-friction differential.

This procedure has two advantages:

• when going off-road in heavy rains, the wheels will not slip,
• the transmission will wear less.

Rancho 5000 shocks are recommended. This will allow the car to get taller, but there will be heavy roll when cornering, especially off-road. This problem is eliminated by installing a stabilizer bar with lateral stability on the front and rear axles. Tuning UAZ 3303 with your own hands will allow you to completely update the car, and you can safely call it an SUV.

Make your brakes reliable

For such roads, it is important to have a reliable chassis.

UAZ 3303 requires tuning of the chassis to ensure safety while driving. Install disc brake systems that promote uniform wear of the pads and increase the braking effect. Reinforce the frame using a subframe and a special reinforcement. For convenience, prepare soundproofing, re-sew the interior from the inside.

If you are not satisfied with the factory seats, an alternative is offered - "Ford Escort", you just need to slightly modify them. Cut off all the pieces, leaving the soft part and the iron structure that holds it. The photos clearly demonstrate the need for tuning the car.

At the bottom, 2 corners are welded to the seats. Drill holes in them to bolt them to the passenger compartment floor. Now, when you ride, you will feel soft and comfortable. You can leave the factory upholstery on the seats or attach an optional lumbar support piece to the seats. If you want to turn the steering wheel and not strain your hands, install a power steering, it is recommended to choose ZF. Even painting and installing wheels with alloy wheels will change the appearance of the UAZ 3303 for the better.

Change the bumpers to reinforced ones. If you are not able to do this work yourself, buy from the RIF store. They are designed specifically for the UAZ. The power threshold will preserve the integrity of the cab for a long time, and the crankcase will protect the engine. Many villagers still want to buy a UAZ 3303 onboard due to its performance characteristics. This model is the most reliable. It is she who prefers most of the off-road lovers.

The tuning of the UAZ 3303 does not end with these works. Protect fuel tank, tie rods, engine compartment. The cab mount can be equipped with a bumper guard. The design of the protective arc will be triggered. if the car drives into a tree or other obstacle. It is advisable to install an ELMO clutch, it is especially in demand with constant movement on the asphalt. Route the engine air intake to the roof. This is very important when you have to cross small bodies of water and roads with impassable mud.

Placing spotlights above the cockpit will come in handy in the dark. At the last stage, a trunk is installed on the UAZ 3303, which is a certain decoration. It is irreplaceable when transporting bulky items. Upgrade the dashboard and install the stove.

The modernization includes equipping the car with a multimedia system. In this case, it is better to contact a specialized company. There are services that install sound specifically on UAZ 3303 cars.

Tuning has always been considered a way to make your car stand out from the crowd. At the same time, correct tuning can not only visually improve the car, but also make it more comfortable and practical. Today, a large number of owners of creations of the domestic auto industry torment their cars with poor-quality modernization, which further shortens the life of the car. But if you approach the issue of tuning correctly, then your car will serve you much longer. Let us analyze it using the example of the domestic UAZ 3303. Tuning of this car is a very common phenomenon that allows you to feel like a real mechanic.

Thanks to domestic engineers

Domestic engineers designed the car in such a way that the owner has a wide range of actions that can be carried out in a UAZ 3303 car. Tuning with your own hands is quite easy to do even in your garage. But you still need to know certain structural features of this car. You have the opportunity to tune the chassis, appearance, as well as add comfort to the interior of your UAZ 3303. Tuning the cabin will consist of upgrading and strengthening the body, so the car after the improvement can be safely called an SUV. As a rule, the modernization also applies to the wheelbase. the tuning that is carried out most often has wide-profile off-road tires and a power kit. But everything is in order.

Replacing rubber

The first thing to do for your car is to change the wheels. The tuned UAZ 3303 will be an indispensable friend for you when hunting, fishing, or just when traveling on a clear off-road. Shallow rivers are often found in the forests of our country, and after heavy rains, most of the land is submerged in mud. Therefore, the right decision would be to install rubber that is capable of overcoming such obstacles. The ideal rubber size can be up to 25 inches. UAZ 3303, the tuning of which you are going to do, also needs to strengthen the suspension.

Strengthening the car frame

The fact is that the installation of large rubber entails possible damage to the car's suspension, which is simply not designed for such machinations. In addition, the procedure for raising the suspension will protect you from possible damage from the wheel arches of the new rubber. And the car will gain unprecedented cross-country ability on the off-road, which is full of pits and other irregularities.

Similar results can be achieved by taking the time to install the spacers. UAZ 3303, the tuning of which you are going to carry out, must have a reinforced bottom, and if the car does not have such a characteristic, you need to take care of its installation. The reasons for the need to provide underbody protection are the frequent hits of large branches under the vehicle.

Installation of the winch

Now let's move on to the winch. On off-road terrain, situations often arise in which you will have to get out of trouble on your own. When you sit down in the mud, and there is not a single soul around, the winch will become your savior. In addition, you will have the opportunity to help your comrades on the road. On the UAZ 3303, you can install both electric and the difference between these types is significant, because the latter is more reliable, it is precisely it that is preferred by most of the off-road enthusiasts. The advantage of hydraulics is that it is more powerful and is powered by an engine that builds up pressure. Its electrical competitor works through the battery, thereby reducing the life span of the latter.

To strengthen the cabin, a kenguryatnik is installed. This protective arch will serve you when the car comes into contact with trees and other obstacles, and the placement of floodlights above the cab will come in handy in the dark. You can also tune the cabin: make it soundproof and put more comfortable seats. If you cannot do without music, then you will need to contact the company that installs car sound in the UAZ 3303. Photos of the tuning look great. With the right approach, our domestic car can be simply made a "candy", because the cross-country ability of this car can envy even the most expensive SUV.

High-quality and well-thought-out tuning of the UAZ-3303 allows you to transform working and unpresentable equipment into a luxurious and convenient wheeled all-terrain vehicle that is not inferior to expensive foreign counterparts. The "Tadpole", as it is popularly called, has a solid base, a spacious enough body and a cabin to accommodate many useful options. The changes will increase the functionality, cross-country ability and reliability of a small flatbed truck, make it comfortable and personable.

Technical tuning

Do-it-yourself revision of the UAZ-3303 should start with modifying the frame. During the tuning process, many different options are installed on the car, which leads to an increase in the load on the frame. To prevent its breakage, one-piece pipes or metal plates are welded over the factory seams. If possible, reinforcement is carried out on all sides of the joints. Having strengthened the base, you can proceed to further improve the car.

Wheel part

Fitting alloy wheels improves the exterior of the vehicle. The width and diameter of the rubber are selected based on the conditions in which it is planned to operate. If the car is being converted into an all-terrain vehicle for hunting and fishing, it is advisable to install wide wheels with the ability to adjust the pressure from the cab.

Installation of wheels with an increased diameter is associated with trimming arches, lifting work to build up the steering column rods, transfer case and gearbox. But the efforts and resources invested are justified - the car gains increased cross-country ability.

It is possible to improve the all-terrain qualities of the car by installing tracked blocks on the rear axle. Tracks and gears from snowmobiles are used for their manufacture.

Chassis

Since the machine is being converted for off-road driving, the engine and transmission must be protected from mechanical stress. To do this, an aluminum or titanium plate with a centimeter thickness is attached under the power plant.

If the springs are in satisfactory condition, then they can be left, cleared of dirt and rust. It is advisable to replace worn-out products. Hydraulic shock absorbers with height adjustment are installed on both axles. This will allow you to change the vehicle's ground clearance for highway or off-road driving. The self-locking differential on the rear axle shaft increases the cross-country ability of the vehicle.

See " How to make external and internal tuning of a UAZ farmer car

Fuel tank

The fuel tank is practically unprotected from external influences. When driving on impassable terrain or bad roads, there is always the risk of not only piercing the tank, but also losing it completely in contact with a stone, tree trunk or thick mud.

There are such options for protecting the fuel tank:

1. Replacement of standard mounts with powerful steel holders with a thick steel plate on the base.
2. Transferring the tank to the body or to the space between the cab and the cargo hold.

Both options are simple from the technical point of view and do not require approval from the traffic police.

Designer tuning

External modernization of the car is carried out in order to distinguish it from the general monotony, to make it visible and catchy, to attract the attention of others. Correct tuning allows not only to visually improve the appearance of the car, but also to make it more comfortable and functional. Irrational modernization leads to accelerated wear of components and mechanisms, a decrease in the resource of the vehicle.

Interior trim

As for the UAZ-3303, tuning the cockpit is an almost unlimited field of activity. You should start from the outside.

You can do the following:

• put tinted windows, equip doors with electric lifts;
• restore old optics by inserting new LED lamps into it;
• trim with plastic fairings;
• paint in a color corresponding to the purpose of the machine;
• make stylish footrests.

Interior improvement options:

• safe and multifunctional dashboard;
• ergonomic steering wheel with adjustable column;
• climate control system;
• seats with air suspension, armrests and position adjusters;
• on-board computer with a navigator;
• sheathing of surfaces with sound and heat insulating materials;
• lightweight plastic furniture with sliding doors.

A removable console can be installed on the engine compartment cover.

UAZ 3303, popularly referred to as " tadpole"For the characteristic appearance, the childish swelling of the" face "and the naively wide open" eyes "- a working car, a worker. Created to carry one thousand three hundred kilograms of cargo, UAZ "tadpole" copes with heavy loads. Unassuming about the quality of the road, cargo UAZ it is often used for bringing supplies to hunting lodges and fishing huts.

Slightly modernized onboard UAZ overcomes the summer heat, autumn thaw, muddy country roads and even complete off-road, much better than a standard truck. Different variants tuning UAZ 3303 allow replacing overseas pickups, advanced all-terrain vehicles, bulky mobile homes with an inexpensive domestic car.

Tuning UAZ 3303 start with improving the frame

Rarely when tuning onboard UAZ 3303 leads to a decrease in the load on the supporting structures of the car. As a rule, as a result of tuning, the mass increases, the carrying capacity rises, and the off-road qualities of the car improve. A standard frame left without reinforcement under new conditions experiences overloads, deforms, cracks and eventually breaks.

The frame is reinforced in different ways, however, the most effective is welding on top of the factory structure of elements connected together, made of a solid rectangular pipe.

Tuning frames UAZ 3303 is also necessary when converting a truck into specialized equipment. Does the car serve a suburban construction or a small farm? By becoming a dump truck, it will bring even more benefits!

True, the traffic police do not welcome the amateur reconstruction of vehicles. However, deep tuning UAZ 3303 with your own hands it is not forbidden to perform - especially when using units and parts of guaranteed quality.

Tuning of the chassis of the UAZ 3303

The wheelbase is the second stage of the rework. You know better what conditions you have to work in " tadpole"- therefore, no one better than you will choose new wheels for UAZ!

The use of wheels with an increased diameter, justified when driving on very rough terrain, will require lifting operations with the obligatory revision of the springs and replacement of shock absorbers.

The principles of lifting are covered in the article on the page.

It is useful for fans of radical transformations to know: attempts to rearrange UAZ tadpole ski-controlled caterpillar tracks have already been undertaken - more than fifty years ago. Hybrid exotic turned out to be unviable ...

Technical tadpole tuning is not limited to modifying propellers. Reasonable recommendations include replacing the rear axle and differential, equipping the car with a more efficient braking system and powerful generating equipment, installing a diesel engine and completing the transmission with an automatic transmission from an American or Japanese "full-size" pickup.

For all the tempting of such changes, one should take into account the high cost of rework, coupled with the low consistency of the performance characteristics of the borrowed units. In other words, increasing investment in tuning UAZ 3303 does not mean a mandatory increase in the resource of the car ...

Inexpensively and comfortably!

The easiest, but not the most suitable UAZ 3303 cab tuning - carpet. The use of a real Turkmen or a rare Mongolian carpet could create a nomadic aura, appease the spirits of the road, and awaken memories of wild ancestors. However, a real carpet stands as cabin 3303 fully loaded - but you want the cost tuning UAZ "tadpole" was inferior to the price of an oligarchic yacht ...

Trauma-safe front panel, ergonomic steering wheel, high-quality seats, quilted upholstery and other amenities - UAZ will not interfere! With them, it becomes quieter in the car, warmer in winter, cooler in summer.

A cabin is a cabin, but if you purchased " tadpole", In order to have a car for fishing, hunting, mushroom picking and generally" outdoors "- replace the truck UAZ body to the inhabited KUNG!

Large tinted windows kunga UAZ is the key to the visual comfort of passengers. Sofa cushions can be easily converted into sleeping places. An economical wood-burning stove makes it possible to heat the room and cook food.

UAZ turned into a humble ...

Or a luxury mobile home (see), will serve you as a safe haven during trips of any distance and complexity!

UAZ 3303 ("tadpole") is often used to transport important goods, as well as ambulances.

The car is available in two versions:

• 330364 - features a large cab with a metal platform.
• 330394 - has a small two-seat cab, the platform is made of wood.

The car has a distinctive tread pattern. His suspension is dependent on both sides. The brake system is equipped with a vacuum booster and a hydraulic drive, it is double-circuit.

The imperfection of the driving characteristics can be eliminated by tuning the vehicle with your own hands. Many photos on the Internet indicate that after changing the internal systems and design, a car can turn out to be a good vehicle for transporting goods.

Complete vehicle tuning includes:

• replacement of wheels;
• development of the chassis;
• interior, bumper and body trim;
• increased tank protection.

Let's consider all the proposed stages in more detail.

Wheel and chassis

The permeability directly depends on the quality of the wheels. To increase it, you will have to replace the wheels with wider ones. Moreover, the diameter should not be more than twenty-four inches. To replace parts:

• lift the car body;
• install spacers, trim fenders;
• replace the bridges with the Bars ones (their width is greater);
• change the differential so that the transmission will last you longer, and the wheels will not slip even in bad weather conditions;
• replace shock absorbers with imported ones, springs for longer ones;
• to protect the windows from damage, install an electric winch and replace the battery with a version with a higher power.

In order for the vehicle to brake in time, install a powerful braking system. For this:

• purchase a stretcher and frame with an amplifier (RUB 50-80);
• use a disc system installed on the car from the back and front (10-25 tr.).

To avoid skidding when cornering, be sure to attach stabilizers to the sides. Such an element will help the vehicle balance.

Interior decoration

Tuning a cabin is an unlimited field of activity, where you can realize any ideas. Inspired by a photo from the Internet, let's start:

1. Get rid of the old upholstery and also remove the mirrors.
2. Select material and measure.
3. Upholste the interior with the fabric of your choice. Learn that a soft material should be laid between the fabric and the roof of the UAZ - for example, a synthetic winterizer.
4. Select the shape of the seats and adjust them by trimming the edges (if the seats are not spacious enough).
5. Weld small perforated corners to the seats.
6. Screw the chairs into the floor using the bolts.

By sliding the seats forward, you can sit on them reclined. Accordingly, the stress on the arms and back will be less.

If you wish, you can restore old optics, put tinted windows or electric lifts, decorate the interior with plastic fairings, install a climate control system, a navigator and an on-board computer (the latter will cost you 5-10 tons).

You can also improve the dashboard by replacing the film or installing a power steering. This hydraulic system will make your vehicle easier to drive by making steering easier.

Body and bumper

If the car body rusts, then:

• clean it from dirt, having previously disassembled;
• trim off areas that are already corroded;
• weld on the pads and paint the surface using a primer and emulsion paint.

It is better to apply the emulsion in two layers, waiting for each of them to dry. This will help paint better. Another tuning option is to make the body wider or longer by changing its shape.

Do not forget to reinforce the bumper by attaching a special frame to it. A ready-made set with it can be purchased at almost any car store. If you cannot install it, it is better to contact a specialized salon.

Tank tuning

The fuel tank is poorly protected from external influences, so you can pierce it or completely lose it if you accidentally get into thick dirt or stone. To avoid this:

1. We transfer the tank to the space between the cargo compartment, or to the body.
2. We replace the standard mounts with steel holders.

To protect the tank, engine and steering wheel:

1. After strengthening the cabin with an anti-shock frame, we bring the air intake to the roof (initially it is located in the engine compartment).
2. We install the roof rack.
3. To protect the steering wheel, we use upholstery - for example, we put on a casing (price from 500-1000 rubles).

The above changes to the fuel system are simple and do not require approval from the traffic police. But, as mentioned above, it is better for drivers who are not confident in their abilities to go to the salon so as not to damage the system elements when replacing components or improving them on their own.