Many people dream of their own car, but only a few find the strength, inspiration and desire to work hard and painstakingly on creating their own dream car. It is these desperate self-taught people who make the automotive world more interesting, saving it from the boredom of assembly line production. It is their creations that sometimes attract the attention of others more than the top models of famous manufacturers.

Today we want to introduce you to the best self-made cars from around the world. Our rating includes really worthy homemade products that can be sent to mass production even today without fear of low demand. Most of the cars that hit the rating can easily compete with the cars of major manufacturers, but, unfortunately, they will forever remain in a single copy, delighting the audience only at various auto shows. However, this is what makes them special, inimitable, unique, and allows their owners to feel like heroes who have managed to single-handedly create a truly worthy car. So let's get started.

There are only five homemade products in our rating. It could have been more, but we decided to limit ourselves only to cars that have passed all the necessary certification and registered, i.e. all participants in the rating are allowed to ride on public roads without any restrictions. This only confirms their quality and uniqueness, and also speaks of a real opportunity to compete with production cars.

The fifth place was given to the off-road vehicle " Black Raven"Built in Kazakhstan. This unique vehicle, created for hunting in the steppe conditions, has a menacing and at the same time futuristic design. “Black Raven” could have boldly appeared in science fiction films or even played the role of an army vehicle, but it is used only by its creator - a modest self-taught engineer from Karaganda.

The exterior of the SUV is really original, a little awkward, but distinctive and brutal. "Black Raven" is a real man's car with a powerful frame chassis, riveted aluminum body panels, multi-eyed optics and all-terrain wheels that are ready to bite into even difficult ground. The "Black Raven" is torn into battle due to a powerful American-made V8 engine, working in conjunction with an automatic transmission and a gearbox from the ZIL-157 located on the rear axle. Excellent driving performance of the SUV is guaranteed by a long wheelbase, wide track, a central arrangement of the engine and gearbox, as well as independent suspension with torsion bars from the armored personnel carrier. All this allows the car to maintain stability during sharp maneuvers even at a speed of about 100 km / h and easily overcome pits and bumps encountered on the way.

The unique home-made salon is designed for two passengers. The equipment of the jeep includes LED brake lights and turn signals, an electric drive of the front windows, an electric drive of the hood and a unique self-retriever with a chain drive, mounted in the bottom. As for the price, the approximate cost of the "Black Crow" is about 1,500,000 rubles.

Go ahead. On the fourth line we have the first ever Cambodian car- "". Oddly enough, it was created not by a state or private car company, but by a simple mechanic Nhin Feloek, who decided that at 52 it was time to get his own car.

Angkor 333 is a very compact two-seater roadster with a very modern interior and quite attractive design, especially for a poor Asian country.

The Cambodian home-made has received a body with streamlined shapes, stylish optics and modern aerodynamic elements. Moreover, the Angkor 333 is a hybrid vehicle equipped with a traction electric motor, a 3-speed automatic transmission and a 45-horsepower petrol unit designed to recharge the battery. Surprisingly, a homemade roadster can accelerate to 120 km / h and cover about 100 km on a single battery charge. In addition, the equipment of the Angkor 333 includes a touchscreen display that acts as a dashboard, and the doors are opened by means of a special magnetic plastic card. Even most production cars do not have such functions, so the development of a talented mechanic is worthy of respect.

The first Angkor 333 was built in 2003. In 2006, the creator presented the second generation of his brainchild, and in 2010, he saw the light of a modified third-generation car, which to this day is manually assembled in small batches to order in the garage of Nkhin Feloek, providing the retired mechanic with a comfortable old age. Unfortunately, nothing is known about the cost of the roadster.

The third place in our rating is occupied by the car, which is most often called "". This impressive SUV was created by Vyacheslav Zolotukhin from Krasnokamensk, Trans-Baikal Territory. The homemade product is based on a modified GAZ-66 chassis, supplemented by reworked shock absorbers from KAMAZ, front split hubs and power steering from a Hino truck.

The Mega Cruiser Russia is driven by an atmospheric 7.5-liter Hino h07D diesel engine, which, in the process of revision, received a KAMAZ air cleaning system. The motor is assisted by a 6-speed manual transmission and a transfer case from the GAZ-66, in which all bearings were replaced with imported ones. The homemade product has a full drive, with the ability to block the bridges, in which the main pairs have been replaced, which made it possible to achieve a smooth ride on paved roads.

The Mega Cruiser Russia body is metal, prefabricated, attached to the frame through 12 shock-absorbing supports. The "living area" is a redesigned cab of the Isuzu Elf truck, to which is also attached a redesigned "rear" of the Noah minivan. The front part of the body consists of modernized fenders from the GAZ-3307, a hood of its own design and a radiator grill, molded from several copies of the Land Cruiser Prado grille. The homemade bumpers are made of metal, of our own design, and the rims are riveted from GAZ-66 wheels, which made it possible to install rubber from the TIGER army jeep.

If you look into the cabin, you will see 6 seats, a lot of free space, a right-hand drive, a rather nice interior and a comfortable driver's seat with excellent visibility in all directions.

Mega Cruiser Russia is equipped with a 150-liter gas tank, a gyroscope, a 6-ton electric winch, an audio system and even a spoiler. According to the author of the homemade product, the SUV is capable of accelerating to 120 km / h, its weight is 3800 kg, and the average fuel consumption is 15 liters on the highway and about 18 liters off-road. Last year, Mega Cruiser Russia was put up for sale by its creator at a price of 3,600,000 rubles.

The second line of our rating of homemade products is occupied by another unique SUV, this time from Ukraine. We are talking about a car " Buffalo", Also built on the basis of the GAZ-66. Its author is Alexander Chuvpilin from Bila Tserkva, Kiev region.

"Bison" received a more modern and more aerodynamic look, the originality of which is emphasized, first of all, by the front part of the body. The creator borrowed most of the body panels from the VW Passat 64, but some elements had to be made independently.

Under the hood of the Ukrainian homemade product is a 4.0-liter turbo diesel with a return of 137 hp, borrowed from the Chinese DongFeng DF-40 truck. He also presented Bison with a 5-speed manual transmission. Together, the Chinese units provided the home-made SUV with the ability to accelerate to 120 kph with an average fuel consumption of 15 liters per 100 km. Permanent drive at "Bizon" is rear, with the ability to connect the front axle, differential lock and use a lower gear.
The car is able to overcome a ford up to 1.2 meters deep, and is also equipped with a tire pressure control system with an additional outlet for domestic needs: pumping boats, using a pneumatic jack or pneumatic tools, etc.

The body of the "Bizon", planted on 12 supports, is reinforced with numerous stiffeners and a frame frame, and the roof of the SUV is made of 2 mm thick metal, which made it possible to place a folding tent on it for the night. One of the features of the Bizon is the nine-seat layout of the cabin (3 + 4 + 2), while the two rear seats, which can be rotated in any direction, can be retracted, allowing to increase the free space of the luggage compartment. In general, "Bizon" has a comfortable and spacious interior with high-quality finishes, comfortable seats and a front panel with two glove compartments.

Among the numerous equipment installed on the Bizon, we highlight the presence of a power steering, a dual brake booster, a rear view camera, a GPS navigator, an electric winch, special reversing lights and a retractable footboard for the tailgate. Alexander Chuvpilin spent about 15,000 dollars on the creation of Bizon.

Well, it remains only to name the winner, which, of course, could only be a sports car, because every motorist dreams of a racing car. A simple self-taught person without technical education, a Chelyabinsk resident Sergey Vladimirovich Ivantsov, also dreamed of it, having conceived the construction of his own sports car back in 1983. A car with an unpretentious name " ISV”, Consisting of the initials of the creator, was under construction for about 20 years and during this long journey managed to survive two prototypes, sculpted in a 1: 1 scale, first from window putty, and then from plasticine. At the same time, according to the creator, he did everything "by eye", dispensing with drawings and calculations.

From a plasticine model, Sergey sculpted plaster casts of parts of the future body, after which he painstakingly glued them out of fiberglass and epoxy resin. It is worth mentioning separately that the creator of this masterpiece is allergic to epoxy resin, and therefore he had to work in an army gas mask, sometimes spending 6-8 hours in it. What can I say, the persistence with which he walked towards his dream deserves respect, and the result of his work is impressive not only for ordinary onlookers, but also for seasoned experts in the automotive industry. In terms of design, the homemade ISV is ready to compete with many currently produced sports cars, and the final concept of a sports car was conceived 15 years ago. As Sergey himself admitted, he drew inspiration from the Lamborghini Countach, but if you look closely, you can catch notes of Aston Martin, Maserati, and even Bugatti in the ISV's appearance.

The ISV is based on a spatial welded frame made of square tubes, and the entire chassis and suspension are borrowed with minor modifications from the Niva. The ISV's drive, as befits a good sports car, is only rear-wheel drive. As for the engine, initially the homemade product received a modest engine from the "classics", but then it gave way to a 4-cylinder 1.8-liter engine with 113 hp. from the BMW 318, paired with a 4-speed "automatic". Unfortunately, due to his great love for his brainchild, Sergei never loaded the ISV at full capacity, so we will probably never know the true speed capabilities of the car. The author of the sports car himself drives quite accurately and does not accelerate more than 140 km / h.

Let's take a look at the ISV salon. Here is a classic sports car 2-seater layout with an interior that is maximally sharpened for the convenience of the driver. And this is not surprising, because the salon was made by hand, it was repeatedly modified and altered. Here, as well as on the exterior, you can see a concept of interior design worthy of a sports car, some details of which also resemble the style of cars of famous manufacturers. The ISV has a removable roof, guillotine doors, air conditioning, power steering, stylish Audi dashboard and audio system.
It's hard to talk about the price of an ISV. The creator himself considers his car invaluable and, according to some sources, once refused to sell it for 100,000 euros.

That's all, we introduced you to the most interesting and high-quality home-made cars of recent times, approved for use on public roads. Each of them is unique, original and interesting in its own way. But all together they, of course, left their bright mark on the history of the world automobile industry and gave a sea of ​​positive emotions not only to their creators, but also to numerous visitors to various automobile exhibitions and shows. We hope that the number of fans of creating masterpiece cars in their garage will only grow, which means that we will have reasons for new ratings.

There is no limit to perfection. This saying is well known to everyone and everyone. And any car owner strives to make perfection out of his car. For many drivers, factory settings are not enough. They strive to bring something of their own. Something that will distinguish them from the rest. But what if what you want cannot be purchased in the store? Only one way out suggests itself: if you can't buy - do it yourself.

They have become very popular lately. They improve the appearance of the car, change some of the technical characteristics or add nice additions to the options. Among the variety of possible alterations, we suggest considering several options.

Car wash

Let's start with the look. When the car is clean, the paintwork is shiny and sparkling. Such a technique is pleasant to look at. Immediately there is a feeling that the owner is watching his car. But it is not always possible to go to a car wash for various reasons. In such cases, homemade products for the car will come to the rescue. You can assemble a small sink with your own hands, which can be used at any convenient time.

To make a sink, you will need the following parts:

• canister with two drains;
• hose 2 m long (suitable for connecting a washing machine);
• a watering gun with a telescopic bar;
• Union;
• spool;
• rubber pad (outer diameter 2.4 cm, inner diameter 1.5 cm);
• coupling.

Now let's get started:

1. We make a hole in the lid of the canister. We smear the “spool” with sealant and insert it into the prepared hole of the cover. Let it dry.
2. We make a small hole in the second cover. It is necessary for The junction of the cover and the sleeve is treated with a sealant and also allowed to dry.
3. Cut off the nut with the fastener from the curved end of the inlet hose. The mount is no longer needed. Apply sealant to the nut and attach it to the back of the coupling. We connect the hose with the cut side to the nut of the quick-release fitting. Next, the main fitting is screwed on, which is also connected to the watering gun.
4. On the second side of the hose, insert a rubber gasket into the nut. This will protect the system from air intrusion. After that, the nut is screwed onto the quick-detachable union.

This completes the process of making homemade products for a car with your own hands.

Seat upholstery

Homemade products can also come in handy for updating the salon. Useful gadgets and crafts for cars allow you to replace worn out parts, supplement the interior with lighting and much more. Consider how to update the seats.

This will require fabric. You can choose two colors - for the central part of the seats, for the back of the backrest, beige leather is suitable (it will take about 4 m), and everything else will be black. Black leather needs about 3.5 m. The entire fabric must be duplicated (glued) with a layer of foam rubber of 0.5 cm. The foam rubber is glued with non-woven material with an iron. Due to this, it will be easier to work with him.

We remove the covers from the removed seats (this is more convenient). We number their individual parts. In order not to get confused, we transfer everything to paper. Also, on paper, you need to note the attachment points of the knitting needles (they are on the back of the covers). The needles themselves will then be inserted into the new covers.

Next, we disassemble the trim into separate parts (dissolve the seams). The patterns of the necessary elements are obtained. We lay them out on the seamy side of the fabric (seamy side up, so that a mirror image of the details does not turn out) on thick paper (you can on the wallpaper) and circle around the perimeter. Along the edges we leave allowances of 1 cm, which will go to the seams. Then all patterns are cut and stitched (starting from the center). On the reverse side, from any fabric we make pockets where knitting needles are inserted.

Having connected all the details, we get new covers. We do this process one by one for all the seats. Having made such interesting and useful homemade products for the car with your own hands, you can update the interior without contacting the service.

Ceiling update

You can also replace the trim on the ceiling with your own hands. Homemade products for a car in this case must be started with removing the ceiling. This can take a long time. Fastening in each case is individual. There is nothing complicated, the main thing is to carefully examine everything and check that all the details remain intact.

When the ceiling panel is removed, remove the old fabric from it. When preparing material for the ceiling, you need to remember one important point: on the seamy side, it should have a small layer of foam rubber. The fabric is glued with heat-resistant glue. When the adhesive is dry, the panel can be re-installed on the ceiling. Do it in reverse order.

"Angel Eyes"

It is quite possible to collect useful electronic homemade products for a car with your own hands. For example, "Angel Eyes" will allow you to update the headlights of any car. To make them you will need:

• transparent plastic sticks (it is possible from the blinds);
• resistors (220 Ohm);
• battery (9 V);
• LEDs (3.5 V).

The process looks like this:

1. On any metal can, the same diameter as the headlights, we wind a ring made of a plastic stick with pliers. To do this, heat it up a little.
2. Next, connect a pair of LED and resistor. Their performance is checked using a battery.
3. Another LED is connected to it.
4. We make deep cuts on a frozen ring made of a plastic stick.
5. We collect the ring, attach the LEDs, connect.

Conclusion

Homemade products for a car with their own hands can be assembled by everyone. The main thing is to be confident in your abilities. A little information from our article, a little of your reasoning and thoughts, and everything will work out. And the car will only get better from this. And it is doubly pleasant that it was done by hand.

In our time, it is difficult to surprise with some new car model, but a self-made vehicle has always attracted attention and excitement. A person making a car with his own hands will face two scenarios. The first is admiration for the creation, and the second is the smile of others at the sight of an invention. If you look at it, then there is nothing difficult in assembling a car with your own hands. A self-taught engineer is only required to know the design of the car and the basic properties of its parts.

Historical facts

Certain historical conditions preceded the start of car construction. During the existence of the union, mass production of cars was carried out. They could not meet the individual needs of the consumer. That is why self-taught inventors began to look for ways out of this situation and did it by designing home-made cars.

In order to make one car with your own hands, three non-working ones were required, from which all the necessary parts were removed. If we take into account the people living in remote villages, then they most often improved various bodies, thereby increasing their capacity. Cars began to appear that had high cross-country ability and could even overcome water. In short, all efforts were devoted to simplifying life.

A separate category of people attached great importance to the appearance of the car, and not just its technical properties. In addition to beautiful cars, sports cars were made, which were not much inferior to factory copies. All these inventions not only amazed others, but also became full-fledged participants in the road traffic.

During the Soviet era, there were no specific restrictions on homemade vehicles. Bans appeared in the 80s. They concerned only certain parameters and technical characteristics of the car. But most people could get around them by registering one vehicle with the relevant authorities under the guise of a completely different one.

What you need to assemble a car

To proceed directly to the assembly process itself, you need to think over everything in detail. It is necessary to clearly understand how to make the future car, and what technical characteristics it should have. First, you need to determine for what purposes the car will be used, and then implement the idea. If you need a frank workhorse, then in order to make it yourself, you will need special materials and parts. It is also important to make the body and frame of the car as resistant to loads as possible. When a car is made only for driving, the question is only in its appearance.

How to make a car with your own hands for a child, you can learn from the following video:

How to make drawings

You should not trust your head and imagination, it would be better and more correct to think about exactly what the car should be. Then transfer all available considerations to paper. Then it is possible to correct something, and as a result, a drawn copy of the future car will appear. Sometimes, for complete confidence, two drawings are made. The first depicts the exterior of the car, and the second shows a more detailed view of the main parts in detail. Before completing the drawing, you need to prepare all the necessary tools, that is, a pencil, an eraser, a drawing paper and a ruler.

Nowadays, there is no need to draw a picture for a long time using a regular pencil. To facilitate this task, there are special programs with wide capabilities and with their help you can make any drawing.

Advice! If there are no engineering programs, then the usual Word test editor will help in this situation.

With a strong desire, you can make any car with your own hands. If there are no own considerations, then ready-made ideas and drawings can be borrowed. This is possible because most people involved in the creation of homemade cars do not hide their ideas, but, on the contrary, present them to the public.

Kit-cars

In the vastness of the countries of Europe and America, the so-called "kit-cars" have become widespread. So what is it? This is a certain number of different parts with which you can make a car with your own hands. Kit cars have become so popular that many options have appeared that allow you to fold any desired car model. The main difficulty is not in the assembly, but in the registration of the car obtained as a result of the assembly.

To fully work with the kit car, you must have a spacious garage. It also requires toolboxes and knowledge. If you do not have certain skills, then the work will not give the desired result. If the work is done with the help of assistants, the assembly process will be faster and more fruitful.

This kit includes everything from small screws and instructions to large parts. For a full-fledged work, there should be no serious difficulties. It should be noted that the instructions are not in printed form, but are presented in a video master class, where everything is considered to the smallest detail.

It is very important to assemble the vehicle correctly. This is necessary in order for the creation to comply with all the standards and norms prescribed in the regulations of the traffic police. Since the failure to comply with the points leads to problems with the installation of the vehicle on record with the relevant authorities.

Advice! If possible, then you can consult with experts in this field.

You can learn more about what kit cars are and how to make them from the following video:

Designing a car using materials at hand

To make the task of assembling a home-made car as easy as possible, you can take the base of any other car that fully functions as a basis. It is best to take the budget option, since it is never known in which direction the experiments will lead. If there are old worn parts, then they must be replaced with serviceable ones. If possible, you can make parts with your own hands on lathes, but this is if you have professional skills.

First of all, you need to start assembling the car with the body, instruments and necessary interior parts. Modern inventors use fiberglass for the bodywork, and before that there was no such material, and plywood and tin material were used.

Attention! Fiberglass is a sufficiently elastic material that allows you to implement any idea, even the most unusual and original.

The availability of materials, spare parts and other components makes it possible to design a car that, in terms of external parameters and appearance, will not be inferior to the car models of the most leading car manufacturers in the world. This requires ingenuity, good imagination and some knowledge.

DIY supercar:

Fiberglass car construction

Start assembling a car made of fiberglass from the moment you select a suitable chassis. After that, the selection of the necessary units is carried out. Then it is worth moving on to the layout of the interior and the fastening of the seats. Upon completion of this, the chassis is reinforced. The frame must be very reliable and strong, since all the main parts of the car will be mounted on it. The more accurate the dimensions of the space frame, the better the fit of the parts.

For the manufacture of the body, it is best to use fiberglass. But first you need to make a base, that is, a frame. Foam sheets can be attached to the surface of the frame, as closely as possible to the existing drawings. Then, as needed, holes are cut, and, if there is a need, the parameters are adjusted. After that, fiberglass is attached to the surface of the foam, which is putty and cleaned on top. It is not necessary to use foam, any other material with a high level of plasticity will be useful. This material can be a continuous canvas of sculptural plasticine.

It should be noted that fiberglass tends to deform during operation. The reason is exposure to high temperatures. To maintain the shape of the structure, it is necessary to strengthen the frame with pipes from the inside. All excess parts of fiberglass must be removed, but this should be done after it is completely dry. If everything is done correctly and there are no other works regarding the design, you can proceed to the interior equipment and electronics fasteners.

If in the future it is planned to re-design, then a special matrix can be made. Thanks to her, the body making process will be faster and easier. The matrix is ​​applicable not only to make a vehicle with your own hands from scratch, but also to improve the condition of your own car. Paraffin is taken for manufacturing. To get a flat surface, you need to paint it on top. This will increase the convenience of fastening parts for the new car body.

Attention! With the help of a matrix, the entire body is made completely. But there is an exception - this is the hood and doors.

Conclusion

In order to implement the existing idea and make a car with your own hands, there are a number of suitable options. All sorts of working details will be helpful here.

With your own hands, you can make not only a passenger car, but also a larger and more powerful truck. In some countries, craftsmen manage to earn decent money from this. They make cars to order. Cars with various original body parts are in great demand.

How to make a Porsche with your own hands: