And so it has a bright and catchy appearance. Therefore, independent "refinement" of the exterior requires only the addition of a few final "strokes" that emphasize (to a greater extent) the individuality of the owner of the X-Trail. The same axiom applies to the procedure for improving the technical performance of the "Japanese".

We increase engine power

You can increase the power of the native X-Trail engine using special devices. Such "pumping" of the car has been used not so long ago and was called "chip tuning". For this, several types of devices are used:

1. RSchip - add-on module for electronic engine control. Tuning Nissan X Trail with this device is based on changing the values ​​of the amount of fuel supplied and the degrees of the ignition timing set by the manufacturer. This increases the power of the motor and its torque. All parameters change dynamically and their value directly depends on the load that the car engine is "experiencing" at a given time.

The ignition advance angle is the angle of rotation of the crank mechanism element from the beginning of the current supply to the plug (ignition) until the moment at which the piston reaches the dead center position.

2. RSchip Turbo - a device at high speed changes the value of indicators coming from several electronic sensors to the vehicle engine control module. The result is higher motor performance results.

Such tuning Nissan X Trail allows to increase the power indicator of the petrol engine of an SUV by 17-20 "horses". More impressive results with the help of chip tuning can be achieved on cars equipped with turbodiesel units. The above devices provide the X-Trail diesel propulsion system with a power increase of 30-53 "horses".

The cost of "pumping" the crossover motor ranges from 14-20 thousand rubles. A more expensive option is chip tuning for turbocharged diesels. As a result of such "independent" alteration, none of the vehicle's components suffers. Therefore, tuning will not cause complaints from the manufacturer's service centers.

We modernize the standard optics package

X-Trail has an expressive and extraordinary appearance, but some of the owners are not averse to "touch up the eyes" of their car. More precisely, upgrade its standard optics package. Moreover, you can upgrade both the headlights and taillights.

The easiest way to carry out Tuning Nissan X Trail in front is to independently put on the headlights an additional light package, which is fondly nicknamed "Angel Eyes" by the people. It is a neon circle around the front lantern bulbs. The set of the package includes 4 CCFL ring lamps. Their rated power ranges from 2 to 4 W, the guaranteed service life is 40 thousand hours, and the cost is several thousand rubles.

CCFL is a technology for the production of modern lamps in which a cold cathode is used as a lighting element. The design of such a lamp consists of a glass tube, tightly sealed on all sides and filled with a mixture of inert gas and mercury.

In addition to aesthetic functions, giving the appearance of the front of the car individuality, angel eyes also have practical significance. They are used as daytime running lights. The light package, consisting of CCFL lamps, is characterized by low power consumption, even in comparison with LED counterparts. Therefore, it can also be used as parking lights.

X-Trail body kit

The body kit on the Nissan X Trail is the most popular way of self-pumping a Japanese crossover. All body kits perform several basic functions:

• Aesthetic - giving the SUV a bright and recognizable appearance;
• Protective - protect individual elements of the car and the entire structure from destruction;
• Aerodynamic - reduce the resistance of the car body to air currents while driving;

The well-known "kenguryatnik" is also a body kit and serves not only as a place for attaching headlights, but also to give greater rigidity to the entire body structure.

Depending on the material of manufacture, the body kits are divided:

• Plastic - used to protect such elements of the car as sills, doors and hoods;
• Fiberglass - serve to improve the aerodynamics of the crossover body and partially to protect the glass (transparent body kits);
• Metal - used for attaching additional attachments: lanterns, winches.

Salon tuning

In addition to internal and external changes, you should not miss the opportunity to increase the number of amenities in the cabin. Many are attracted by the basic trim, and the multimedia system, and the ergonomics of the cabin. However, each driver has his own personality. You can add the steering wheel, dashboard, gear lever with carbon inserts. In addition, you can buy not the typical black, but more bold ones.

The luggage compartment in the Japanese crossover is spacious, especially when you consider the ability to lower the last row of seats. However, this place can be customized for yourself. The trunk can be extended with additional fasteners for convenient transportation of furniture, strollers or bicycles. Also, various hidden containers for storing tools and other things do not hurt.

We invite you to compare the interior design of the Nissan X Trail with the interiors of other mid-size crossovers and SUVs that you can browse. You can also familiarize yourself with the interior design of cars from one price category in this article.

In addition to visible changes, you can carry out imperceptible, but important procedures such as noise and heat insulation. Not everyone undertakes them, because the occupation is not easy and expensive. However, you can find quite detailed and clear instructions for step-by-step tuning of the cabin. After this kind of improvement, the Nissan X Trail will be more comfortable for the driver and his passengers.

The Nissan X-Trail T30, produced since 2001, is the first generation of compact cars that combine the qualities of an SUV and a family car. Nissan X-Trail T30 has climate control, audio system, on-board computer, electric windows and mirrors. The basic equipment of the car includes many electronic auxiliary systems. The highlight of the model was the instrument panel placed in the center of the torpedo. Nissan X-Trail T30 quickly gained popularity in the Russian market due to its increased comfort, high quality and wide basic equipment.

In 2007, production of the Nissan X-Trail T30 was stopped due to the entry into the market of the 2nd generation Nissan X-Trail, which differs from its predecessor in increased dimensions.

Tuning Nissan X-Trail

The tuning studio did not stand aside and offer a range of parts and accessories for these crossovers, made of high quality plastic or aluminum. After all, tuning Nissan X-Trail is a great opportunity to make the crossover impressive and exclusive.

Generally, cars are ideal for city driving. However, many car owners willingly cultivate the image of a crossover, therefore, these seemingly ideal models are often tuned. It is worth noting that the external tuning of a car performs not only an aesthetic function, but also a protective one.

Tuning Nissan X-Trail T30 and T31

The standard tuning of the Nissan X-Trail T30 and T31 includes chrome body kit parts, which are especially relevant in off-road conditions. The body kit for the Nissan X-Trail will perfectly protect the body paintwork from various damages that the crossover often encounters on its way. Photo tuning Nissan X-Trail demonstrates updated and exclusive car models.

Body kits include:

• The stainless steel bumper guard performs a protective function of the car in front and will not cause additional damage to pedestrians in a collision;
• front bumper and rear bumper covers protect the car from damage;
• sills, side pipes, steps, underbody protection under the engine are very functional parts;
• moldings will perfectly protect car doors from scratches;
• fog lights are installed to improve line of sight and widen the field of view on the road in bad weather conditions;
• trunk rails will make the car look more sporty;
• alloy wheels will complement the image of a cool SUV

You can add sophistication to an SUV using airbrushing. The pattern can reflect the personality of the wearer.

Tuning salon Nissan X-Trail T31

Salon Nissan X-Trail is quite comfortable and practical, however, there is no limit to perfection. Tuning Nissan X-Trail T31, as well as the first generation crossover model includes:

• upholstery of seats with high-quality and refined materials: leather, alcantra, fabric.

The new interior trim will make the car unique and raise the prestige of the owner. The ceiling, the dashboard, and the plastic panels are often altered. Decorating the latter with natural wood or carbon fiber will add a special chic to the interior of the cabin. To make the Nissan X-Trail interior more comfortable for the driver and his passengers for long journeys, the installation of multimedia elements, the latest audio system and noise isolation is performed.

Chip tuning X-Trail

Nissan X-Trail vehicles can also be subject to chip tuning or computer auto tuning reprogramming. Chip tuning uses the reserves of the stock engine installed in the standard vehicle. As a result, engine performance is increased and the car is able to accelerate faster. However, such changes are noticeable only in those cases when there is a need for it, for example, when accelerating. The increase in power is carried out within the permissible values, the standard engine protection program continues to operate normally. In this way, the protective programs of the motor are not changed and no overload of the motor components occurs. Another important advantage of the chip tuning is the reduction in fuel consumption.

Tuning Nissan X-Trail is an expensive pleasure, but the result is worth it, because such a car will favorably differ from its counterparts and will be in a single copy.

The ObvesMag online store has been specializing in the implementation of auto-tuning and equipment for numerous brands of progressive cars for several years. We are official dealers of Russian and foreign manufacturing companies and are happy to offer tuning for Nissan X-Trail 2009-2011 at the most favorable rates at any time. We have on sale a wide range of accessories:

1. Deflectors and many other accessories for Ixtrail diversify the appearance of the machine and make it more convenient to use.
2. Radiator grilles will transform the style of your vehicle.
3. Our store offers towbars of both a utilitarian look and with elegant stainless steel linings that emphasize the status of vehicles.
4. Steel or aluminum sills, which make it possible to fit more conveniently and protect the body from dirt and stones flying out from under the tires.
5. Bumper guards and a stainless steel body kit will help avoid traces of unsuccessful parking.

Installation of body kit in Moscow

The range of machine accessories presented in our online catalog is quite wide. Our well-trained team tries to post high-quality photos on the website so that you can make a choice. If suddenly you have any difficulties with the products, you are not able to make the right choice - we will be happy to help you by phone, provide samples. We have samples of products from various manufacturers, which can be viewed before purchasing.

Our online store delivers goods throughout the country. We offer free shipping. Transportation in the city of Moscow is carried out by our own courier service. When delivered across the Russian Federation, transport organizations allow you to order any spare part for tuning Nissan Ikstrail 2008-2010. Whatever the choice, you will always receive your order by the most convenient method.

The ObvesMag online store has been specializing in the implementation of auto-tuning and equipment for numerous brands of progressive cars for several years. We are official dealers of Russian and foreign manufacturing companies and are happy to offer tuning for Nissan X-Trail 2009-2011 at the most favorable rates at any time. We have on sale a wide range of accessories:

1. Deflectors and many other accessories for Ixtrail diversify the appearance of the machine and make it more convenient to use.
2. Radiator grilles will transform the style of your vehicle.
3. Our store offers towbars of both a utilitarian look and with elegant stainless steel linings that emphasize the status of vehicles.
4. Steel or aluminum sills, which make it possible to fit more conveniently and protect the body from dirt and stones flying out from under the tires.
5. Bumper guards and a stainless steel body kit will help avoid traces of unsuccessful parking.

Installation of body kit in Moscow

The range of machine accessories presented in our online catalog is quite wide. Our well-trained team tries to post high-quality photos on the website so that you can make a choice. If suddenly you have any difficulties with the products, you are not able to make the right choice - we will be happy to help you by phone, provide samples. We have samples of products from various manufacturers, which can be viewed before purchasing.

Our online store delivers goods throughout the country. We offer free shipping. Transportation in the city of Moscow is carried out by our own courier service. When delivered across the Russian Federation, transport organizations allow you to order any spare part for tuning Nissan Ikstrail 2008-2010. Whatever the choice, you will always receive your order by the most convenient method.

Tuning Nissan X-Trail is an event that requires a lot of money. Regardless of what kind of car you want to get in the end - a solid city car or a powerful all-terrain vehicle, you still have to spend money. How to save on tuning without losing the result - let's figure it out on the example of modifications t30 and t31.

1

Many experienced specialists, and just drivers who know a lot about car improvement, will say with confidence that there is always a method that is much cheaper for every expensive way of modifying a car. And the first example of such a statement can be safely called chip tuning - an event that will worthily replace the purchase and installation of a turbine on a Nissan engine. The latter, for a minute, will cost you at least 60 thousand rubles.

Nissan x trail

Some owners of Nissan t30 and t31 models will ask with bewilderment: "How will chip tuning affect the performance of an SUV, because in most cases this method is used for passenger cars?" The answer is quite simple, and it lies in the versatility of this refinement method. After all, replacing the standard firmware has long been not only an increase in the power of the T30 and T31. Re-flashing today means stabilizing the operation of the transmission, increasing the reliability of the suspension and braking system, improving the exhaust and much more. It is these and other advantages of chip tuning that make this method one of the most popular in the Russian and world car services market.

You can talk for a long time on the topic of flashing, but it is best to take and start preparing for work. First of all, you need to make sure that the engine is in perfect condition. We strongly advise you to check each of the components of the SUV's power unit, replace filters and engine oil, tighten the pipes, etc. Only then can you buy hardware and software for chip tuning. Once you have put the t31 power unit in order, you can start buying equipment and downloading programs for chip tuning. Regarding the first, you need to purchase the original K-Line adapter and 1 USB adapter to it. We also need a laptop with Windows XP pre-installed, as other operating systems do not allow chip tuning.

As for the software part, here, first of all, you need to download the new firmware. This is best done on the official website of the company. Keiko which supplies the control units of the t30 and t31 models from Nissan. It is worth choosing the program that appeared on the site no earlier than 2014. Older programs have a bad reputation due to the large number of errors that the on-board computer issues after chip tuning. In addition to the new program, for the ECU, you need to download a utility that will help you correctly configure the work of Nissan parts. In the case of the t30 and t31 models, it is best to download the program Chiploader 2.22.0... We advise you to download the paid version, as it has more functions for calibration.

So, after preparation, you can get to work. We open the hood of the car and see a black box under the wiper blades. It is necessary to unscrew the 4 fasteners holding the box lid. Under it is the ECU of the SUV. We turn the block with the connectors towards ourselves and connect the K-Line adapter to the OBD connector. We connect the other end of the adapter to the laptop through the adapter. We start the car and wait for a folder with ECU information to appear on the laptop display. We minimize the folder and proceed to the installation of the Chiploader program. Next, open the last one and also collapse it.

The next step in chip tuning is to unpack the new firmware. We open the utility archive and enter the ECU as the final folder. Which folder to choose - take care of this in the case of t30 and t31 Chiploader... Press "Ok", after which a window will appear on the display in which you will be offered to configure the operation of the off-road vehicle elements.

2

Calibration of Nissan parameters is a very responsible process that requires attention and patience. It is best to start tuning with the motor. Select the "Engine" section and move the slider to the right. On the side of the display, you will see that the program Chiploader shows how the operation of this element will change after chip tuning. So if you move the motor slider too far to the right, the transmission and suspension will turn red. This means that the latter will succumb to a strong load. Your task is to customize the operation of each auto system as efficiently as possible, but without harming other parts.

Tuning Nissan X trail

At the end of the calibration, click "Ok" and wait for the installation of the new firmware to be completed. On average, this will take 5-10 minutes. Do not worry if during this time the motor of your T30 or T31 starts up and stalls itself several times - it should be so. After the running load line turns green, you can disconnect the adapter and put the ECU in place. We fasten the lid of the box in which the unit is located and close the hood. Next, we check the result of the performed chip tuning. Provided you did everything right, your t30 will have an extra 35 hp. With. The torque of the car will increase by 25%.

In addition, the car will lose roll on sharp turns, braking will become smoother. A separate word should be said about control - the steering wheel will become much more sensitive, and the car will react faster to your commands. In the case of the t31, the results will be even better. Power and torque will increase by 25% and 35%, respectively. The operation of the transmission will also change. You will no longer notice the shifting glitches that worried you before. The t31 exhaust will also work better due to the use of more air by the injector. With all this, fuel consumption will decrease - you will save about 1 liter. for every 100 km.

3

It just so happened that tuning the Nissan X-Trail cannot be imagined without the use of a kengurin. The only problem is that many owners of T30 and T31 simply do not dare to hang additional structures on their cars, because, as they say, give our inspector just a reason. But we hasten to reassure you - for installation on SUVs, which includes your Nissan. Moreover, the manufacturer has provided for the possibility of mounting the structure, having provided the X-Trail front bumper with all the necessary holes and struts in advance. Having dealt with the legality of the kenguryatnik, you can proceed to buying it.

The bumper guard on the Nissan X trail

The first thing to look for in a store is the manufacturer and the authenticity of the product. If you find company kangarines TCC- you are in luck, but you also need to make sure that you are looking at the original item.

If you are offered a fake, then it will last you no more than six months. And when it falls off, it will also tear off part of the bumper. Another manufacturer that we advise you to pay attention to is a domestic company Technotech... If you find the original protection of this company, you can forget about dents on the bumper and broken headlights for a long time. It is very easy to determine the authenticity of the products of the above companies. To do this, just look at the country of origin. Products TCC are produced in Germany, and kangarines from Technotech- in Russia. As for the size of the part, everything is even simpler here. On the packaging of kenguryatniks, manufacturers indicate a list of cars for which these designs are suitable.

After purchasing a kenguryatnik, you can proceed to installation. First, we dismantle the standard bumper and clean the body under it. Next, we inspect the t31 bumper itself. If there is rust on it, be sure to remove it and clean the surface of the part. We apply a degreaser to the element and wait for the bumper to dry. After that, we proceed to the installation of the kengurin on the part. We put 2 elements one on top of the other and screw in the pins from the kangaroo kit. Observe the correct installation, read the instructions carefully! Next, we apply the connected parts to the body. It is best if your friend can help you with this.

While he is holding the structure, you must screw on the bumper, and then immediately start screwing in the pins in the front of the car's underbody. The last step will be to fix the element above the radiator grill. After installation, you need to carefully check the reliability of the fasteners. All pins must be screwed in all the way, otherwise, when driving, the kengurin will swing on the t30 and t31 bumper and may fly off with the latter.

4

Many of us have heard about applying a carbon film to various elements of the car interior. But not everyone knows that this material has not only outstanding aesthetic properties. In addition, carbon also reliably protects interior parts from scratches and the harmful effects of ultraviolet radiation. And this is exactly what the owners of the t30 and t31 need so much. In the standard configuration, the dashboards of these models are made of fairly high-quality plastic. However, doubts are caused by the paintwork of the latter, which loses its color and protective properties a year after the purchase of a new car.

Dashboard tuning

That is why it is best to use carbon to refine the dashboard, and the more details you paste over now, the fewer elements you will have to repaint later. The carbon film itself and its quality have a very big influence on the final result. On sale you can find products that have the effect of a ribbed structure only visually. In fact, this carbon is completely smooth. In large car stores, you can find 3D film on the surface of which there are thin stripes of different tones. Such products are already a little more expensive, but they are most often chosen by car owners.

When buying a carbon film, it is worth considering the dimensions of the t30 and t31 interior. Both models have a fairly spacious cockpit, so it is best to buy a little more material to spare. In addition to the carbon itself, you will also need to work:

• flat and Phillips screwdriver;
• masking tape;
• roller;
• soap solution;
• stationery knife;
• Super glue;
• sandpaper;
• degreaser.

First you need to dismantle all the small parts of the cabin. We take them outside, wash them, dry them and degrease them. While they are drying, you can start working on the larger elements. To do this, we measure the dimensions of the spare parts and transfer them to carbon. We cut off the pieces of material we need. We apply a soapy solution to the interior parts and remove the paper lining from the film. We wet the latter and gently apply it to the wet element of the Nissan cab. Without waiting, you need to start expelling soap bubbles from under the film. To do this, take a roller and drive it from the center of the film to its edges.

In places where the product has not adhered to the surface, you can use a little super glue. We carry out a similar procedure with each t30 and t31 interior element of a large area. You will have to "tinker" a little longer with small details. Due to their rounded shape, it will be necessary to ensure that the film fits correctly into place and grabs everywhere. All parts must dry completely after application. This will take about a day. After that, you can install all small parts in place and continue to operate the SUV.