Starline a94 teams. How to enable autostart for Starline a94 car alarm. Where is the service button Starline

car alarm StarLine A94 Slave differs from only the presence of the function of working with a regular key fob. This popular feature is finally available to users Starline. Beyond the mode super slave which allows you to manage StarLine A94 Slave from a regular key fob, this alarm system implements many other useful features: auto and remote start, built-in CAN, shock sensor, distance control and more.

Modular architecture StarLine A94 Slave does possible installation into the system additional modules: .

Super function slave
Unique mode of operation with a regular key fob. StarLine A94 Slave works great with a regular alarm key fob, which she uses as a "hands free" tag.

CAN interface
For fast and quality installation, StarLine A94 Slave a CAN driver is used, which significantly reduces installation time on modern cars.

Interference protection
car alarm StarLine A94 Slave works on one of 128 dedicated channels. This is necessary due to the extremely common frequency range on which this security system operates - 433 MHz. Thanks to the large number of channels, you will not have interference in big cities.

Capabilities and features of StarLine A94 Slave

Management from a regular key fob.
Using the alarm key fob as a tag.
Work in Hands Free mode.
Possibility to install GSM and GPS modules.
Built-in shock/shake/tilt sensor.
Built-in CAN module.
Auto start of the engine on several parameters.

Equipment

Central module StarLine A94 Slave.
Keychain with LCD display (can be used as a tag).
AAA battery.
Keychain without LCD display.
Blocking relay.
Transceiver.
Status indicator (LED).
Service button "Valet".
Mounting kit.
Engine temperature sensor.
Brief list of key fob commands.
Manual.
Installation instructions.
Warranty card.

When installing an alarm on a car, as well as further setting it up, the owner must necessarily take into account all the requirements given in the Starline A94 operating instructions.

[ Hide ]

Description Starline A94

This model was released in 2013. The system is reliable security complex, characterized by extensive functionality and the presence of the option of intelligent autostart of the motor. The transmission of impulses between the control module and the key fob is carried out via a non-scanned dialogue channel, which eliminates the possibility of interception. A multi-system 2 Kan bus is integrated into the Starline A94 anti-theft installation. Thanks to the built-in GPS and GSM adapters, the car owner can track the coordinates of the location of his car.

Functions

What functions are implemented to ensure reliable protection:

the consumer has the ability to control additional door locks;
disable option can be set standard system if the tailgate opens;
if install additional blocker, then you can set up a simulated fault power unit;
you can control the hood lock, only close it, without opening it.

What comfort options are available:

remote control starting heater if provided by the machine manufacturer;
option of automatic return of the steering column;
automatic control function driver's seat if implemented by the machine designer;
an option to automatically activate low-beam lighting when the car starts moving, if the driver releases the parking brake lever or presses on the gas.

Options for automatic engine start:

the ability to turn off the audio system and wiper blades when the function is activated;
option to simulate impulses of intelligent ignition locks;
the car owner can activate the window heating or seat heating option when the remote engine start is turned on;
option to simulate the second signal of the starter device;
if the machine is equipped with a Start/Stop button, and an error occurred while trying to autostart and the engine did not start, you can set up automatic reactivation.

What options can be configured when the security mode is enabled if the machine supports the following functions:

folding side mirrors;
automatic closing of the hatch;
when the security function is activated, you can adjust the light path.

The autostudio channel provided a complete online overview of all the options and features of the Starline A94 car alarm.

Description of configurations and characteristics

The complete set of systems of models A94 and A94S with 2CAN module includes the following elements:

a control module or central unit in which a processor is located that transmits and receives signals;
one main remote control with two-way communication and a liquid crystal display and the second - an additional one, without a screen, a case for devices is purchased separately;
button for mounting on the hood;
a device for receiving and transmitting signals;
status indicator LED;
mounting kit for connecting all components;
service key, designed to adjust and turn off the machine "signaling";
installation and operation manual;
service documentation for managing and adjusting the parameters of the GSM tracker, which describes step by step all the nuances of use;
consumer memo;
motor blocking relay with block;
power unit temperature controller, with its help remote start is configured;
SIM card for installation in a GSM module.

Specifications

As for the main technical characteristics:

the value of the frequency of control signals is from 433.05 to 434.79 MHz;
number of radio channels for system control - 128;
the largest range of the main remote control is 800 meters when transmitting control commands to the unit, and if the key fob receives signals, then the range can be up to 2 kilometers;
auxiliary control panel will be able to operate within a range of 15 meters from vehicle;
tilt and impact controller is integral type;
the operating temperature range at which the unit works correctly is from -50 to +85 degrees;
supply voltage value direct current from 9 to 18 volts.

Safety

When operating a car alarm, it is important to remember that disconnecting the battery when the protection mode is activated can lead to blocking the car engine. For a further start, the power unit must be unlocked. If the “signaling” is connected independently, then when performing the task, the battery must be disconnected in order to prevent possible power surges and failure of electrical equipment.

How to install the system?

Before installing the anti-theft device A94 Slave or A94 2CAN, you must carefully read the instructions for use.

The installation procedure is as follows:

The control module is installed first. The central processor performs one of the main signaling options, with its help, signals from the console are sent to the limit switches, which leads to the activation and deactivation of the protection mode. It is necessary to consider the installation location of the control module, it is desirable to arrange it so that a potential attacker does not find the device. You can install the unit in the passenger compartment or trunk, but it must be taken into account that the effect of moisture and high temperatures on its design will damage the device. Therefore, install the module in a dry place, for example, under the interior trim or behind dashboard. To do this, disassemble part of the lining around the steering column and remove the shield. If there is behind him free place, then install the unit here and securely fix it with self-tapping screws or bolts. It is important that the device is not affected by vibration while driving, otherwise the module will quickly become unusable.
Then install the siren. It should be placed in engine compartment, only the device cannot be placed in close proximity to the power unit. Regular exposure to high temperatures will cause it to break. The siren should be placed with a mouthpiece in the direction of the car, sideways or up. It is not recommended to point it downwards, because in wet weather dirt from under the bottom can get on it. The siren must also be securely fixed.
Shock and tilt sensors are being installed. They must be installed inside the car. Moisture and high temperatures should also not affect the device, otherwise it will break. The shock controller is installed in the central part of the body, it must fix the impact on the car equally from all sides. The temperature sensor is mounted on the nozzle cooling system power unit in accordance with the requirements specified in the operating manual.
The blocking relay is being installed, which is placed in the lock, for this, the circuit that comes with the kit is used. The element is designed to block the ignition system in the event of a car break-in.
Switches are placed on the hood, doors and trunk. To install them in the door, you will have to disassemble the lining.
On windshield A signal transceiver is mounted on the car, it is also called an antenna adapter. It is necessary to put the device on the glass in order to ensure a good signal transmission range. When installing the antenna, keep in mind that its location near the metal parts of the body will interfere with the transmission and reception of pulses. Therefore, it is desirable to place the transceiver at least 5 cm from the metal.
Then the indicator light is installed. It will signal that the car is armed. It is advisable to place the diode in the area of the windshield, its blinking for the criminal will be a warning that the car is under protection.
Then the wiring is done. Electrical circuits must be stretched from the siren, limit switches, sensors and transceiver to the control module. From the siren, the wires are pulled into the cabin through a special technological hole. All electrical circuits must be laid under the plastic lining of the passenger compartment so that they do not fray or wear out. Otherwise, functionality will be broken. anti-theft system.

Mounting the Control Unit Installation of a siren in the engine compartment Connecting alarm wiring

Wiring diagram Starline A94

The procedure for connecting all contacts is carried out in accordance with the diagrams indicated in A94, photos in Russian are given below.

Photo gallery "Installation and connection of alarm"

Installation scheme Wiring diagram

How to use?

In order for the anti-theft system to effectively protect and monitor the condition of the car, you need to know how to use it.

Keychain use

Programming and updating the functionality of the alarm key fob can be done by the user himself.

Button Assignments

Remote control buttons are used for:

activation and deactivation of the protective mode of the machine;
remote start of the power unit;
engine start settings by time, timer or temperature;
silent activation and deactivation of the protection mode;
sensitivity settings for shock and tilt sensors;
turning off the machine motor remotely, etc.

Control commands

The programming of the basic control commands looks like this:

with the ignition off, a short press of key 1 will activate the armed mode with sound;
By pressing the same button, the security mode can be disabled;
to activate and deactivate the security mode without sound, press button 1 twice;
to interrupt the alarm mode, the key 1 is pressed.

Vitaly Kurinov spoke in his video about the features of the functioning and important options of the A94 signaling.

Modes

Consider how you can independently register the modes.

Panic Mode

To turn on the panic mode, the car owner must press the keys 1 and 3 on the main key fob and hold them until a beep sounds. Keys 1 and 2 are pressed on the additional remote control. It does not matter whether the car is armed or not. It is important that the ignition is turned off.

Immobilizer mode

If you enable the immobilizer option, the power unit will automatically lock 30 seconds after the driver turns off the ignition. This mode is activated automatically, so you do not need to turn it on. To disable the lock, you can press the service key for two seconds. After you release it, in two seconds you need to have time to insert the key into the lock and activate the ignition. To turn off the mode, you can place the cursor on the sound on icon on the main remote control, and then press the 2 key.

Anti-robbery mode

To activate the anti-robbery mode, keys 1 and 3 are pressed until a melodic signal is heard. If you are using additional remote control, then you need to long press the keys 1 and 2. A prerequisite is that the ignition must be turned on, and the security mode must be turned off.

Turbo timer mode

Turbo timer mode is for vehicles equipped with a turbocharger. It is used to maintain the operation of the power unit after turning off the ignition with the key for a certain time, which is required to reduce the speed of rotation of the turbine. When activated this mode you need to make sure it's enabled neutral speed gearboxes for manual transmissions or parking for automatic transmissions. The engine of the car must be running and the hood closed.

Dmitry Tonoyan in his video spoke about the features of the functioning of the turbo timer option of the Starline A94 system.

There are several options for activating the mode:

For automatic start option, pull the parking brake lever and turn off the ignition.
When the remote control is operated with the doors of the car locked, activation is carried out hand brake and press key 2 on the key fob. The cursor on the screen must first be placed on the indicator of a working siren.

If the system was installed on a vehicle with automatic transmission gear, then the diode indicator will light up without interruption, and the control panel will emit a melodious signal. In this case, the key fob screen will display the time during which the power unit will continue to function. In case of manual transmission the remote control will also emit a sound signal, and the time will appear on the screen, after which the car engine will turn off automatically if the owner of the car does not turn on the security mode.

Remote engine start and stop

Remote start of the power unit cannot be carried out with the ignition on, open bonnet, disengaged hand brake or depressed gas pedal. If the machine is equipped with a manual transmission, the transmission must be in neutral to perform this task.

Things to consider when setting up a function:

In one cycle, the anti-theft installation is capable of starting the engine up to four times. If after the last attempt to start the unit does not work, then the “OST” indicator will appear on the main remote control equipped with a screen. The device will emit four beeps. But this will only happen if the key fob is in the alarm zone.
When the remotely started power package stalls before the configured warm-up time, the anti-theft system will initiate another engine start cycle.
If you set the option to start at a certain temperature, then it will be activated regardless of which start functions are enabled - on an alarm clock or after a specified time period.

User Irina Belousova in her video showed how the procedure for remote start-up of the power unit is carried out using the Starline A94 signaling.

To activate the remote start option for the internal combustion engine, on the main console, place the cursor on the image in the form of a fan and briefly click on key 3. Or you can hold down button 1 until a melodic signal is heard, and then click on key 3. The machine must emit one siren signal and blink the light. The doors will automatically close, the security mode will be activated and the engine will start. The remote control screen will display the procedure for starting the startup cycle, the key fob will emit one beep.

To remotely turn off the operation of the unit, you need to set the cursor on the remote control screen to the indicator in the form of a fan, and then briefly press 2. To turn off, you can hold down key 1 until a beep sounds, and then briefly press button 4. Turning lights should blink four times, the power unit will stop, while the security function will remain activated. To extend the operation of the motor, you need to put the cursor on the fan indicator, and then press the 3 key.

Door lock control

There are several options for the function automatic control door locks when activating and deactivating the ignition:

The locks will close when the parking brake lever is released if the ignition is on. The door locks will open at automatic mode when the ignition is turned off.
The locks can be closed automatically ten seconds after the ignition is switched on. When it is deactivated, they open.
The door locks can be locked ten seconds after the ignition is switched on.
The automatic control option can be disabled.

User NICKRUS in his video showed what problem car owners may face if car doors do not close.

To enable the option with the ignition activated, the car owner must press key 1 on the main or additional key fob. Or, when the ignition is running, the cursor on the remote control with the display is set to the siren on or off indicator, while key 3 is briefly pressed. To open door locks, you will need to press the key 1 or 2 with the ignition activated, having previously placed the cursor on the siren on or off indicator.

Alarms

Depending on the impact on the vehicle, the types of alarms can be different:

if the first level of the shock controller is triggered, then one alarm cycle will include three sound and six light pulses;
when the second level of the shock sensor is activated, the car will emit twenty sound and light signals;
if the first level of the additional controller is activated, three sound and six light signals will be heard;
when the second level of this controller is activated, thirty light flashes and the same number of sound signals will occur;
a similar number of pulses will be heard when the tilt sensor and additional controllers are triggered, only the display of the control panel will show a car without a hammer icon knocking on it;
if the anti-theft installation detects the impact on the locks of the doors and hood, the siren will emit thirty beeps, and the turning lights of the car will blink 35 times.

How to set up autorun?

When using a machine with a manual transmission, it is important to perform the program neutral setting, which is described in detail in the service manual.

The Alarm Lab channel made a video showing how the automatic engine start option works on the example of a Toyota Tundra car.

To set up auto start on an alarm clock, the car owner must make sure of the following:

the current time is set correctly;
the alarm clock is set to the desired start time;
the function is activated, this is indicated by the corresponding indicator on the display of the key fob in the form of an alarm clock.

To activate autorun, the cursor on the remote control screen must be placed on the icon in the form of a clock and briefly press the key 3. The machine will emit one light signal. The remote control screen will display the time remaining until the start, it is displayed for five seconds. After 5 seconds, the display will resume showing the current time.

To start the power unit at a certain frequency, you can configure the start function after a specified time period. The anti-theft system allows you to adjust this option from two hours to a day, with a step of 2 hours. To activate this function, you need to set the cursor on the screen of the remote control with a display to the indicator in the form of a clock, then press button 3. The same button, immediately after enabling the option, adjusts the autorun time. Each time you press the key, the period increases by two hours. To save all autorun settings, you just need not to press the remote control buttons for four seconds.

The Auto-Doc channel told how to start the car engine by temperature.

If necessary, you can set up a remote start of the internal combustion engine by temperature, which is controlled by a special regulator. The car owner can set the engine start mode from -3°C to -27°C.

How to set the option:

The cursor on the display of the main key fob must be set to the indicator in the form of a thermometer. After that, the key 3 is briefly pressed. The car should emit one light signal. For a few seconds, the key fob will display information about the air temperature.
Then, by short-term clicks on key 3, the car owner sets the temperature, upon which the start is performed. With every click temperature regime changes by three degrees.
When the temperature is set, do not touch the keys on the remote control, the settings are automatically saved.

To disable the autostart option, you need to set the remote control cursor to the indicator in the form of a clock or a thermometer, depending on how the engine was started. Press button 2. Turning lights of the machine should blink twice. The control panel will emit one melodious signal, after which the corresponding image will no longer be displayed on its display.

Sensors

Car owners may experience incorrect work tilt and shock sensors. Such a problem is usually associated with incorrect device settings. Controllers can be disabled if necessary.

The Auto-Doc channel in its video showed how the A94 shock controller is set up.

Temporary deactivation of controllers

The shock controller can be disabled like this:

The protection mode must be activated. The owner of the machine presses the key 2 briefly. You can put the cursor on the indicator in the form of a hammer and press the button 3. The turning lights of the machine will blink twice, the first level of the controller will turn off.
By following similar steps, you will be able to disable two levels of the beat controller. At the same time, the turning lights will blink three times.
If, after deactivation, the impact controller needs to be activated, you must follow identical steps - press the 2 key or place the cursor on the hammer sign and press the 3 button.

How to deactivate the auxiliary controller:

When the protection mode is on, key 1 is pressed until a signal is heard, and then button 2 is briefly pressed. This will deactivate the first level of the controller. The turning lights of the car will blink twice. The remote control will emit a melodic signal.
To deactivate all levels of the auxiliary controller, the above steps must be repeated.
The same steps will have to be followed to activate the sensor.

To disable the tilt controller, do the following:

With the protection mode activated, hold down the key 2 until two beeps are heard - one longer, the other short. This will disable the controller. Turning lights of the car should blink three times.
To enable the sensor, repeat the operation. When activated, the turning lights will blink once.

The Auto-Doc channel showed in its video how the do-it-yourself tilt sensor adjustment procedure is performed.

Possible setup difficulties

According to feedback, during setup, users may encounter difficulties in regulating the autoplay feature. There is nothing complicated in its implementation, it is only important to follow all the steps described in this article. If the remote does not work, this does not mean that it must be carried in for repair. In practice, it often happens that when setting up an alarm, the battery in the key fob quickly runs out, since the car owner performs many actions related to the remote control. You need to change the battery and check the operation of the device again.

After connecting and setting up the alarm with your own hands, we recommend that you do the following:

Carry out diagnostics of the state of sound and light signals of the machine alarm. When the siren is activated, the turning lights should blink.
When the protection mode is activated, it is necessary to diagnose all the limit switches on the doors, trunk and hood. Anti-theft installation should activate the siren when the doors are opened, the parking brake lever is released, the ignition is activated, the gas is pressed, and the controllers are triggered.
Check that when the ignition is activated, the indicator of the running engine in the form of smoke is not shown on the remote control screen. To do this, turn on the ignition, but do not start the engine, and then briefly press key 3 on the main remote control twice. When “smoke” appears, you need to check the operation of the engine. The presence of this indicator indicates that the car owner cannot use the autorun function, since the power unit will start when the transmission is activated. The smoke sign can only be displayed on the remote control when the engine is running.
After diagnosing all the parameters, make sure that the standard electrical devices function without error.

Download instructions for installation and operation of the Starline alarm in PDF format

The service manual, which will allow you to use and configure the alarm, can be downloaded from the link.

The Starline a94 car alarm is equipped with an automatic start system that can be configured based on the instructions provided.

What motorist does not want to leave the house in the cold season and immediately find himself in an already warm car? Modern technologies allow dreams to become reality. Many car alarms are equipped with auto start, which makes the life of the vehicle owner more comfortable. Among these assistants Starline system a94. Its advantage is the ability to start the engine not only remotely, but also automatically, including through an application on a smartphone or via a gsm module.

Differences between automatic and remote start

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

Do not confuse the concepts of automatic and remote start. Not every autostart, despite its name, supports the ability to intelligently, automatically warm up the engine to the required temperature, as Starline does. Basically, this system works like this: you perform a certain combination of pressing the buttons on the key fob, the alarm sends an impulse to the starter, which starts the engine, after a few minutes you enjoy a warm interior and a car completely ready to drive.

Intelligent warm-up or auto-start in the true sense includes more complex algorithm actions, which is embedded in the memory of the Starline a94 device. Thanks to this, the engine can be warmed up based on three predetermined indicators:

time;
temperature;
time interval with constant frequency.

Car preparation

Before you put the vehicle on autostart, you will need to fulfill a number of conditions. The first and most important thing is to make sure that the car will not move on its own. Despite the fact that Starline a94 is equipped with logical protection against movement without a driver, it will not be superfluous to take precautions. For cars with an automatic transmission, it will be enough to transfer the box to the P - parking mode. For vehicles with mechanical box gears, the algorithm of actions is different.

As the instruction advises, for any type of launch, it is necessary to set the "software neutral". You can do this in three different ways:

Set the handbrake to the active state, turn the key to the ignition off position;
Put the car on parking brake without opening the doors, press the second key on the key fob with a short movement;
Simply activate the handbrake without taking further action.

The choice of one of the proposed actions is predetermined program settings produced by car service masters, so the instruction only talks about possible options.

Do not leave the gear selector knob in the gear position!

After performing one of the suggested procedures, it is necessary to remove the key from the ignition, get out of the car and put it on the Starline security alarm.

In the case of correctly taken actions, the machine should give light signals, and the key fob is sound, after which characteristic designations in the form of r 99 or 06 will appear on the display, depending on the activity of the turbo timer mode. When it is on, the motor running time will be counted down. The engine will then be in working condition for some time.

Under what conditions does the automatic start system not work?

Starline car alarm will not allow autostart under the following conditions:

The key remained in the ignition system in the start position
The hood is not closed
Handbrake not activated
Brake pedal pressed
Software neutral condition not met for a vehicle with manual transmission
The vehicle with automatic transmission has not been put into P-parking mode.

Performing a remote start

Starline a94 allows you to start from the key fob in two ways.

In both cases, the engine was started.

You can also remotely stop or continue warming up. For Starline a94, this is done through the following manipulations.

The instruction says: to stop, you will need to find the fan icon again and press it with the second button, or hold down the first key, hear a characteristic beep and, releasing it, press the fourth one.

To extend the work, you will need to perform the same algorithm of actions as in the case of launch, as indicated by the instructions.

Performing an automatic start

Autostart for Starline a94 is possible through three different commands: by alarm clock, by engine temperature and with a certain frequency.

To warm up the engine on an alarm clock, you will need:

Install exact time on a keychain;
Set the alarm time;
Enable alarm
Moving around the display using the fourth key, stop at the clock icon and press the third button.

To set the alarm time on Starline, hold down the fourth button, wait for three beeps - 1 long, 2 short, and press the same key twice more 1 or 2 times, depending on the choice of hours or minutes. Operate the second and third keys to change numerical values. Subsequent pressing of the fourth button allows you to turn the alarm on or off by controlling the second or third keys, respectively.

The instruction claims that the illuminated clock and alarm icons become an indicator of correctly performed actions.

Starline autostart by temperature is possible after performing the following steps:

Select the thermometer icon, as the instruction advised before;
Press the third button and use it to select the desired temperature, reaching which the machine will start to warm up.

The temperature step is three degrees.

In order for the engine to warm up at a certain frequency, you will need to set the exact time. You can enable this function by searching for the clock icon and pressing the third button on it, which also changes the value of the period in 2-hour increments when used again.

On the Starline a94 display, this will be displayed in numerical and alphabetic values, where the first is the period, and the second is its decoding in hours.

To cancel any possibility of automatic start, return to the selected icons and press the second key.

Car alarms have long and firmly entered the everyday life of car owners. Today they are multifunctional systems. Starline has a wide range of options. What this security complex is, what its capabilities are and how to set them up is described below.

Installation instructions Starline A94

It is worth stocking up on a set of tools. You will need:

insulating tape;
blowtorch;
drill or screwdriver;
tools for removing plastic trim.

We mount the Starline control module or CPU, which performs one of the main signaling functions. With its help, there is a removal and setting for protection. The block should be installed out of reach of an attacker. It is important to mount it in a dry place, away from moisture and high temperatures. Dismantled for installation steering column or front panel.
Installing a siren. Its location is under the hood, but away from the engine block - the effect of high temperatures on the part should be excluded. The horn should look up or sideways in the direction of travel. This will prevent dirt from getting inside the element.
Installation of shock or tilt sensors. Installed inside the car, away from high temperature or humid places. The shock sensor is mounted in the center of the body in order to equally respond to impacts from different sides. Temperature lock for remote engine start - on the cooling system pipe.
Locking relay, which is installed in the lock. Required to disable the ignition system.
Elements for unlocking doors, trunk, hood. For their installation, the inner lining is removed.
A signal reception sensor from the Starline key fob is installed under the glass. It is advisable to choose a place 5 centimeters away from metal parts in order to avoid interference with the transmission of impulses.
Installation of the indicator light. He will let you know that the car is under protection. Usually mounted under the windshield, in a conspicuous place.
Wiring. All circuits, sensors and switches are connected to the control module. For laying, special technological holes. It is important to route the cables in such a way as to avoid further chafing or breakage.

Wiring diagram

Below is a photo showing the wiring of the system.

Autorun on Starline A94: which buttons to press

The car alarm has the function of configurable motor activation. Starline A94 can start the engine according to one of three main parameters:

time;
temperature;
time interval.

Some rules must be observed:

the box must be transferred to neutral or park mode;
installed hand brake;
the exact time is set on the keychain;
turn on the alarm, and then, by pressing the fourth button, move to the clock symbol and press the three key.

Keychain functions

The Starline A94 system has step-by-step task settings, including the following.

Security functions:

control of blocking of door locks;
setting the sensitivity of shock or tilt sensors;
hood lock control.

Comfort options:

pre-heater, bringing the motor to a predetermined temperature;
activation of head lighting at the beginning of the movement;
the function of returning the steering column and the driver's seat to its original position.

Motor start options:

turning off the wipers or audio system when starting the engine;
the beginning of heating the glass or seat after the engine is running;
automatic reactivation in case of difficulties with launching.

Additional features:

folding rear-view mirrors;
moving the hatch to the "closed" position;
attenuation of headlights (formation of a "light path").

Setting the time on the key fob Starline A94

The control panel has a liquid crystal screen with a lot of icons. The Starline key fob displays the current time. The clock setting for the A94 modification is as follows.

We hold down the fourth key for a long time and wait for three consecutive signals.
After the clock indicators blinked, we proceed to setting the time. Keys two or three can increase or decrease the effective value.
Press the fourth button again and proceed to setting the minutes in the same way.
Fixing the current indicator occurs automatically, it is enough not to press anything for more than eight seconds.

How to register a Starline A94 keychain

When installing the system, it is necessary to “show” the operating remotes to the car. The binding of the Starline A94 key fob happens like this.

Turn off the ignition and press the Valet service button seven times.
We turn on the ignition. We hear seven signals from the car, which also blinks its headlights 7 times.
Simultaneously press the first and second keys of the Starline key fob. One beep will sound.
Repeat for all remotes (no more than five). Binding interval - no more than 5 seconds.
We turn off the ignition. Three flashes parking lights indicate that the operation was successful.

How to enable autorun on Starline A94

Automatic motor start important function Starline alarms. On the A94 model, it is set as follows:

long press the button of one key fob, and then briefly press the third key;
place the cursor on the fan icon, press button 3.

The standard program is triggered and the countdown to autorun begins, counting from ten minutes. Additionally, you can set the option to start the motor by temperature or at the appointed time.

tilt sensor

This element is part of the Starline A94 anti-theft system. The sensor determines the angle of the car and turns on the siren after changing its position. This helps when trying to transport the machine on a trailer or tow truck. A notification is sent to the owner's console. It is recommended to mount the tilt sensor in the central part of the model.

How to start with a key fob

Remote control Starline A94 has the ability remote start. To start the car, you must press the first and third button. The remote control will give a command to start the engine, and a record appears on the screen. You can turn off the engine by simultaneously pressing keys one and four.

Trunk opening

One of the options is remote unlocking compartments for things. The Starline A94 remote control sends a command to the trunk lock. If the car is armed, then you can open it by long pressing the second key, and then short the first. If the car is disarmed, then pressing the second key opens the compartment.

Temperature Trigger

Alarm Starline A94 has desired option. it automatic start by temperature environment. The feature is handy in cold climates - the engine will periodically turn on and warm up to ensure a confident start when the driver decides to go.

To start by temperature, you need to set the cursor on the thermometer icon on the Starline A94 remote control, then press button three. Short press to set the temperature. The motor can be forcibly turned off by long pressing the key one, and then four.

Reset to factory settings

This procedure may be needed in case of signal loss or other "glitches".

We turn off the ignition.
For a complete reset, it is worth carrying out the procedure twice - the second time you need to press the button ten times already to reset the second table.

Starline A94 programming table

The burglar alarm has many customizable features. The table is needed in order to carry out competent firmware, key fob registration or programming. The photos below will help you fully understand the process of operation and the capabilities of the Starline A94 alarm.

Setting the shock sensor

Starline A94 has a signaling device that notifies of the mechanical impact on the body. The shock sensor has two levels - warning and alarm. The sensitivity parameter is set separately for each, but the first indicator cannot be higher than the second.

Required for setup.

Then again press the three key for a long time, then briefly. Set the level for the warning signal.

Slave mode

The Starline car alarm has a compatibility function with a regular key. This option is called Slave mode. For convenience, when installing the system, the key fob receives its own label, which is the Starline remote control itself.

At the same time, you can arm or disarm the car from regular key. However, if the driver does not have an alarm remote control, then after 10 seconds the car goes into panic mode, turns off the engine and locks the doors. Slave has the same anti-theft protection, but allows you to disarm the car with a single remote control.

Valet Mode

The service button is located in a place hidden from the eyes of intruders. It allows you to bind key fobs, start the engine without a key, or control other functions. Valet mode disables all security options and temporarily disables the system for work on the service.

To disable this mode,

Turn on and then turn off the ignition.
For 10 seconds, hold down the Valet key and the transmitter button at the same time.
The vehicle will beep twice and the car alarm LED will turn off to indicate that the procedure has been successfully completed.

Service mode

The program temporarily disables security functions. To turn it on, place the cursor on the wrench icon, and then press the three button. The car will flash its headlights once, and the key fob will play a melody.

The service mode remotely opens the doors and unlocks the car, however, it is not possible to record new remotes and an individual code. This is how it is deactivated.

Place the cursor on the wrench icon, and then press the 2 key.
A melody will sound, and the car will blink its headlights twice.

Silent mode

The security console has a mute function. Silent mode is useful when using the key fob in a meeting or other places that require silence. Then the Starline alarm panel switches to vibration mode.

Press button 4 until a melodic signal.
By short pressing the key 4 we pass to the choice of turning on the silent mode.
Use buttons 2 or 3 to activate or deactivate this parameter.

Equipment 2can Slave

This version of the Starline alarm has an extended set of functions. In addition to the main options, it is additionally offered:

control from the phone using a GSM module;
built-in 2Can bus which provides fast and reliable transmission encrypted data.

How to disable automatic door closing

Starline A94 has the function of self-return to armed mode after 30 seconds. After that, the doors are automatically closed and restart alarms. The parameter can be set or disabled when switching to the service mode using the Valet button. Time is set automatic locking– 10, 20, 30 or 60 seconds.

Key fob repair Starline A94

Sometimes the key fob starts to fail. Main problems.

Lack of communication between the car and the remote control. It is necessary to check the presence of a working battery in the key fob. Otherwise, you need to reset all values to factory settings.
The presence of radio interference. The problem is solved by switching to the "Megapolis" mode. Thanks to the narrowband OEM FM transceiver, the signal is amplified many times over.

Display Replacement

To others possible problems relate mechanical damage. For example, a part of the case has broken off or the display has cracked. You can change the screen on Starline A94 yourself, having the right set of tools:

thin Phillips screwdriver;
soldering iron with solder;
tester;
wire cutters.

Repair is done like this.

recline protective cover and unscrew the three small screws.
We remove the insides from the case.
Unsolder the faulty display from the board.
We wipe the contact pads with acetone.
Solder everything to the new display.
We assemble the keychain in the reverse order.

How to turn off a car with a key fob

The system has a remote start function. This means that the engine can be started or turned off from the Starline A94 key fob. To complete this task, you must hold down the first and third keys at the same time. You can turn off the engine by pressing button 1, and then - 4.

Installing the GSM module

One of additional features– connection of a telematics device. Activation of the GSM module will allow you to receive voice messages about intrusion attempts on your phone, as well as some other functions. For example, the M30 model determines the coordinates of the car's location online with an accuracy of 3-4 meters.

How to turn off vibration mode

Silent signaling is deactivated as follows.

Press button 4 until a melodic sound.
By short pressing the key 4 we pass to the choice of the silent mode.
Buttons 2 or 3 enable or disable this parameter.
The configuration system is logged out automatically after 8 seconds.

Turbo timer on Starline A94

The operation of some engines is based on turbocharging, which, with intensive use of the car, increases the temperature of the elements exhaust system up to 800°С. During movement, the role of the coolant is played by motor oil circulating through the engine components. It is necessary to leave the motor running for a few minutes after stopping.

To activate the turbo timer mode, you need:

function 1 tab. #2 must be programmed for options 2, 3 or 4;
function 10 tab. #2 must be programmed for one of the ignition support methods.

Switching on the turbo timer.

Make sure the car is on neutral gear(or in the "PARK" mode when automatic transmission), the hood is closed, the engine is running.
Depending on the ignition support method (function 10, tab. No. 2), the turbo timer can be activated in the following way. Automatic - apply the parking brake and turn off the ignition. From the Starline key fob (with closed doors) - turn on the parking brake and press button 2 (the cursor should be placed on the icon).
Engage - Engage the parking brake.

Possible malfunctions Starline A94

Sometimes the system can fail and cause trouble for its owner. You need to know what to be prepared for, as well as what are the most frequent problems concern buyers security system Starline.

Why is the key fob not responding?

Sometimes the connection between the machine and the remote control is lost. The cause of the malfunction is.

The presence of interference. Urban conditions create a lot of obstacles to the signal path. To reduce this problem, it is necessary to activate the "megacity" mode, which greatly enhances it.
Non-working battery. The battery may be discharged, which is why the receiver simply does not accept commands. The battery needs to be replaced.
A dead car battery can also cause a malfunction. You need to check its correctness.
hidden receiver. The signal receiver must be located on the windshield, away from metal parts.
Software failures. It is solved by a new binding of the key fob to the security system.

Why does the key fob light not turn off?

Sometimes car owners are faced with the problem that the remote control display continues to work even when the car is armed. Most often, the backlight refuses to turn off due to a broken control transistor. The problem is solved in any Starline service center, where they can repair the remote control and change the elements.

The indicator lights up constantly

Another malfunction is a continuously working LED. Initially, you should check the limit switches of the hood, trunk, all active modes of the Starline A94 system. Next, you need to proceed to an in-depth study of the problem:

handbrake input must be connected to ground;
if the Slave mode is activated, then it is necessary to increase the range of the tag;
check items 11, 23, 24 on the AF menu by setting them to position one.

Starline A94 fires at night

If the alarm is constantly on dark time days, you can put the car under the silent protection mode. To do this, press buttons 1 and 2. Removal occurs in the same way.

The Starline A94 system adjusts the volume of signals. It is necessary to enter the function programming menu, where select the item Soun. Then long press the three key to sound signal and make another short press.
The indication of the volume value will appear, which can be adjusted using the 1, 2 or 3 keys. The return is automatic.

The constant activation of the Starline alarm may occur due to an overly sensitive shock sensor. Its parameters can also be adjusted.

Press the key three for a long time, and then again briefly. Using the first two buttons, we adjust the alarm sensitivity level.
Then again press three for a long time, then shortly. Set the level for the warning signal.
Press the third key for a long time, and then shortly to fix the set values.

Where is the service button Starline

In order to restart the system, thereby causing the parameters to be reset, you will need the car key and the Valet service button. This secret key allows you to completely reset the settings. When installing, try to find out the installation location. If the Starline A94 alarm was set before you, then you need to look for a button near the following areas.

Center console, under the decorative plastic near the steering column.
Under glove box or inside a compartment.
Near the ashtray or under it.
Sometimes the reset button can be located inside special pockets for small things.
Near the central tunnel, between the seats.
Next to the fuse box.
In close proximity to the pedal assembly.
on door cards.

It should be pressed in case of malfunctions or other "glitches" of the Starline system.

We turn off the ignition.
Press the service key nine times to reset the first programming table.
We turn on the ignition. The car will emit nine sound and light signals, indicating that it has entered the appropriate mode.
For a complete reset, it is worth holding this procedure twice - the second time you need to press the button ten times to reset the second table.
After the end, you must press the service button once, and then listen to the siren signal.
Click K1 key fob Starline A94. The machine will beep to return to default settings.
We turn off the ignition. The car will flash the emergency flasher three times, indicating the successful completion of the procedure.

The key fob is constantly on and does not work

There can be several reasons - most often it is a short circuit or a system malfunction. It is recommended to solve the problem with the remote control in a specialized service center Starline.

How to open the key fob to change the battery

The battery lasts for 6 to 9 months. After that, the signal may become fuzzy and the battery needs to be changed. The process goes like this:

The cover on the back of the remote opens.
The old battery is removed, a new one is installed.

After the procedure, you will need to re-adjust the Starline key fob watch:

hold down the fourth key for a long time and wait for three consecutive signals;
after the clock indicators blinked, we proceed to setting the time, with keys two or three you can increase or decrease the current value;
press the fourth button again and proceed to setting the minutes in the same way;
fixing the current indicator occurs automatically, it is enough not to press anything for more than eight seconds.

Key fob button lock

To make the keys inactive and prevent accidental pressing, you need:

on the Starline A94 key fob, simultaneously press buttons 2 and 4;
will sound special signal, and the inscription “Block” will light up on the remote control;
deactivation occurs by pressing 1 as well as 4 keys.

Button combinations

Different keyboard shortcuts are responsible for different functions. Below is a table with button options for the Starline A94 remote control.

Status indication

A special LED will help determine the current position of the Starline alarm. It notifies you that the security system is working, and that the car is locked. If it is constantly on or if the frequency of its flashing differs from the standard, it is necessary to consult with specialists in the service center. There may be a short circuit or some kind of software failure.

Starline A93 or A94: which is better

Both systems provide high level burglar alarm. They are equipped with additional GSM modules that control part of the functions from the phone, and also send SMS about the current state of the car and its location.

The main difference between Starline A93 and A94 is that the latter has special equipment, where the 2CAN module is installed, which provides more fast transmission data.

Advantages of the A94 model:

high level of protection, the key fob is not cracked by grabbers;
rich functionality;
the ability to send commands from the phone with a GSM module;
adequate price.

Disadvantages:

the use of an overloaded frequency range of 433 MHz, more advanced systems are equipped with other parameters;
128-bit encryption, popular - 256 or 512-bit;
lack of authorization methods such as Bluetooth Smart.

By its standards, the Starline A94 alarm corresponds to the price, however, it belongs to the middle segment of protective systems.

The StarLine A94 alarm system, equipped with a 2CAN module from the factory, is the best option for cars with digital buses except where the body wiring is based on LIN. But since such cars are a minority, it makes no sense to focus on them. The number "9" in the marking indicates support for the A94 autorun, which is implemented using an external power control module. However, it can also be used on cars where autostart does not require duplication of power circuits (the Start-Stop button is used or the ignition switch serves as a low-current switch, as on Renault Megane III).

An auto electrician-diagnostician, a certified StarLine specialist, works on the site. If you have questions about car alarms, ask them at the end of the article in the comments or Vkontakte. When contacting, indicate the make of the car and the model of the alarm.

Problems when autorun is triggered

The connection methods and depend on how the motor is started in standard wiring. The simplest option- this is a power ignition lock: in this case, the input of the autorun module is connected to the common input +12 on the lock, the outputs duplicate the circuits that include accessories, ignition and starter. If necessary, a bypasser is connected regular immobilizer, controlled by the pink wire of connector X1 on the central block StarLine A94.

Work algorithm power module with this connection is simple, and in cases where it does not work autostart StarLine A94, this is more often associated with incorrect settings of the immobilizer crawler or with incorrect determination of engine speed.

The first option is typical for cars where the immobilizer chip is polled not once when the ignition is turned on, but constantly at certain intervals: this happens on the Citroen C4, where the absence of a chip in the reception area of the standard antenna is automatically perceived by the system as pulling out the ignition key. The car will either not start, or start and immediately stall. On similar cars the control channel setting is changed as follows:

We enter the alarm settings menu by pressing the Valet service button 5 times with the ignition off. In StarLine A94 with firmware N2 and later, the button on the antenna module can also be used for this. Turn on the ignition.
AF will be displayed on the screen of the main key fob. Press button 3 to move to the inscription SF.
Long press (until beep) and then short press 3 to enter the SF menu.
By pressing the button 3, go to function 13, which controls the walker. Press button 1 to set it to 13-1 if not using the turbo timer, or 13-3 if using the turbo timer.
Switch off the ignition.

Problems with reading the number of revolutions occur if the installer applied the analog control method, the current firmware does not allow reading them from the CAN bus. And cold motor starts normally, but after working for a while, it stalls: on low revs the alarm system cannot correctly read the analog tacho signal. While the cold engine is running at high speed, the tacho signal is recognized, and when the speed drops to normal idle, the alarm perceives this as an engine shutdown and automatically turns off the ignition and the A94 autostart does not work. To check the correctness of determining the revolutions, start the engine and, when the revolutions fall, press button 3 of the key fob - if the animation of the smoke from the exhaust is not visible, then the alarm does not “see” the fact that the engine is running.

On cars with the Start-Stop button, on-board electronics control the power supply of the on-board circuits and the starter, and there is no need to duplicate the power circuits for the autorun module. The main thing is to correctly program the algorithm for the operation of duplicate signals.

Video: A94 Temperature Trigger

If the ignition is turned on on the car at the first press of the Start-Stop button, and to start the engine you depress the brake and press the button again, then signals are sent from the central unit of the security system in the same order. Function 8 of the autorun menu is necessarily set to 3, and function 14 sets the number of "clicks" on the "Start-Stop" button (1 in the case of setting 14-1 and 2 in all others).

On such cars, one more action has to be imitated. The fact is that some of the on-board units (for example, multimedia) continue to work there even after the engine is turned off, and the countdown for their transition to sleep begins after opening and closing driver's door. During autorun, the door will not open, in which case the radio will remain constantly on. To simulate the opening and closing of the door, an additional alarm channel 5 is used, connected to the wire of the driver's door limit switch. The additional channel triggering algorithm is set by function 20 of the AF menu - door opening / closing simulation corresponds to a value of 20-1 or 20-2.

Manual control of autorun Starline A94

The main way to control autorun, which is most often used, is to force the engine to turn on with a command from the key fob. There are two ways to do this:

Long press button 1 of the key fob, after a beep - briefly 3.
Place the cursor on the key fob screen on the fan-like icon and press button 3.

After that, the standard pre-start cycle will work, then the motor will start running with a countdown timer. The duration of the continuous operation of the motor is set in the autorun settings menu - if the time is set to 10 minutes, then the indicator on the key fob will start counting down from 10. If necessary, extend the operation of the motor by resetting the countdown timer, while the key combination is the same as for starting.

If your alarm has a GPS/GSM module installed, then use mobile application– press and hold the engine icon on the main screen.

How to turn off the Starline warm-up (if things forced you to postpone the trip, and you don’t need to make the engine work in vain)? The combination for turning off the engine looks like this:

Long press button 1, then briefly 4.
Place the cursor on the same icon as we indicated above, but press button 2.

Both methods are equivalent, no matter how the motor was started, use any.