For 20 years, Ford Focus has remained popular, being an unpretentious and reliable car. To ensure reliable operation of its engine, it is necessary to use engine oil approved and recommended by the factory, or fill with a grease that has similar parameters.
Not only the operation of the power plant depends on the correctness of this choice, but also the duration of operation of the unit. Our rating review presents the best oils from various manufacturers, the main parameters of which are optimal for each specific Ford Focus engine (in Russia, the most common models are models with standard engines Endura, Zetec-E, Duratec and Eco Boost (Fox)).
The best synthetic oils for the Ford Focus engine
Synthetics have the properties required for high-quality lubrication of modern engines, have more reliable protection against oxidative processes and reacts little to high operating temperatures inside the engine. Also an important feature of this category of lubricants is a long operating period, during which all the declared characteristics of the oil are maintained.
5 LUKOIL GENESIS ARMORTECH A5B5 5W-30
Best price category
Country Russia
Average price: 1,421 rubles.
Rating (2019): 4.6
The oil is formulated on a high-quality synthetic base, fortified with a whole set of highly active modern DuraMax additives, developed specifically for the line of synthetic lubricants of this brand. As a result, the products have good lubricating properties, antioxidant effect, and do not fade even under extreme loads.
Almost none of the reviews are critical of this oil. Affordable cost, economical operation of the motor, absence of neoplasms in the oil system are noted. Moreover, existing deposits in the engine dissolve gently and gradually, and without precipitation, can be removed with the next lubricant change. As a result, the efficiency of the motor increases, the level of vibration and noise during operation without load is reduced.
4 XENUM OEM-LINE FORD 913-D 5W30
Multilevel motor wear protection
Country: Belgium
Average price: 2 888 rubles.
Rating (2019): 4.8
High quality oil with a low content of sulfates, sulfur and phosphorus inclusions, can be filled in diesel and gasoline engines of Ford Focus with the appropriate approval. Provides minimal wear of friction pairs, the content of carboxylic acid esters (esters) maintains an oil film at high temperature loads, and increases the operating cycle.
The reviews indicate a more economical operation of the motor, an excellent washing effect, starting the engine in winter, even in severe frosts, does not cause difficulties. A comprehensive selection of additives, which is part of Xenum engine oil, increases the resource of not only the internal combustion engine, but also the exhaust system.
3 MOBIL SUPER 3000 X1 FORMULA FE 5W-30
The most popular oil. Best frost resistance
Country: Finland
Average price: 1 928 rubles.
Rating (2019): 4.8
All over the world, Mobil motor oils have established themselves as quality and reliable products. By purchasing this lubricant for the engine of their Ford Focus, owners can fall for an outright fake, the properties of which can ruin the engine of even a tractor. Numerous reviews are full of high ratings for the performance of Mobil Super, and only the lack of decency among some sellers spoils the big picture.
In general, the oil ensures reliable operation of the internal combustion engine at any time of the year; winter is not unusual for a product developed in Finland. It can be successfully used in the northern regions of the country, with more severe climatic conditions. In addition, the lubricant reliably protects the engine from overheating, does not form carbon deposits and stops corrosion processes inside the engine. The complex action of this oil inevitably leads to an increase in service life.
2 CASTROL MAGNATEC PROFESSIONAL E 5W-20
A good high-tech oil that ensures a long engine life with regular, timely changes. The molecular structure of the lubricant ensures the coverage of the parts, especially strengthening in places of high energies (points of contact of friction pairs) and preventing direct contact. Even at long intervals in engine operation, the molecular structure retains the required amount of oil on the working surfaces and provides lubrication of the parts until the oil pump creates working pressure in the system.
Many Ford Focus car owners began to fill in this oil from the first days of operation, and in their reviews they note complete satisfaction with its properties and high-quality engine performance. During use, the formation of any deposits in the engine was not noticed and there is not even a hint of their appearance.
1 FORD FORMULA F 5W30
Original oil. Stable viscosity
Country: England
Average price: 1 785 rubles.
Rating (2019): 4.9
Made specifically for Ford automotive products, it provides optimal conditions for engine operation under any load. The base lubricating base is obtained by the traditional hydrocracking method and, thanks to a multi-stage purification system, is not inferior in characteristics to synthetics obtained from gas. The surface of the parts inside the motor is covered with a strong oil film, which reduces friction, preventing premature engine wear.
In the reviews of Ford Focus owners, the stability of the viscosity of the oil, good fluidity in severe frosts, a simultaneous increase in engine power and fuel economy are positively assessed. A set of high-quality additives ensures the stability of the structure of the oil - it does not dilute at high temperatures and prolonged loads. It also has a good cleaning effect without creating any deposits in the motor.
The best semi-synthetic oils for the Ford Focus engine
Semi-synthetics are actually a synthesized oil, diluted in different proportions with mineral oil. The temperature resistance of such oil is lower than that of pure synthetics, but otherwise the lubricant does its job perfectly. The use looks more preferable in engines with high wear, but it can be poured into modern engines as well. In this case, one should not forget that the interval between replacements in this case will be shorter.
4 Comma X-Flow Type F 5W-30
The best price in the category. Increases engine resource
Country: England
Average price: 1 610 rubles.
Ranking (2019): England
A special feature of this lubricant is the presence of an exclusive Infineum additive package, which provides an excellent detergent and anti-corrosion effect. Thanks to the atomic inclusions of the metals Ph and Zn, the best sliding performance was achieved, which significantly reduced the wear of parts during operation.
Ford Focus owners characterize the oil as a reliable protection for the engine. The reviews indicate an improvement in the dynamics of the internal combustion engine, a decrease in noise during engine operation without load, and fuel economy. When operating in northern regions, Comma X-Flow has proven itself well, providing easy start-up in frosts exceeding -30 ° C.
3 MOTUL 6100 SAVE-LITE 5W20
High level of chemical stability
Country: France
Average price: 2,500 rubles.
Rating (2019): 4.8
Another Ford recommended oil deserves to be included in our rankings. There are only two drawbacks to this product - the relatively high cost and the ability to purchase a miserable parody of it under the guise of Motul 6100. The latter simply obliges Ford Focus owners to be more selective when choosing a seller.
As for the cost, against the background of how the engine is "happy" with this oil, and with each subsequent replacement it increases its resource more and more, the price looks quite justified. Low sulphated ash content, satisfactory detergent and oxidizing effect prevent the grease from burning out under any load. Chemical stability at high operating temperatures of modern internal combustion engines provides unsurpassed properties and provides reliable protection for engine components.
2 LIQUI MOLY SPECIAL TEC F 5W-30
High level of detergent properties. Extended drain interval
Country: Germany
Average price: 3 675 rubles.
Rating (2019): 4.8
The oil of this brand does not need advertising - it is one of the leaders in the lubricants market that sets a high level of quality. Despite the fact that the base of this grease is based on a mineral base, the technology of deep distillation (hydrocracking) has made it possible to achieve a quality comparable to pure synthetics.
Special tec is approved for use in Ford vehicles. The high alkaline index of the oil (10.3) leaves no chance for corrosive and other oxidative processes inside the engine, prevents the formation of deposits and carbon deposits. There is an increased service life and stability of operation in high-energy modern motors, which is not entirely typical for lubricants of this category.
1 FORD MOTORCRAFT SAE 5W30 SYNTHETIC BLEND
Better friction protection
Country: England
Average price: 1,729 rubles.
Rating (2019): 4.9
This premium oil is formulated from the purest, multi-stage refined base. The oil film is resistant to shear, oxidation and mechanical stress. The result is a phenomenal reduction in friction, an increase in engine power and resource. There is also a high level of detergent properties that keep the lubrication system clean at the level of a new engine. To some extent, all of these factors also contribute to fuel economy.
Many owners constantly pour this oil into Ford Focus, especially since it was developed just for the cars of this manufacturer. The grease has performed well in a wide variety of operating conditions. There are positive reviews from drivers who successfully use Ford motorcraft in the northern regions, rural areas (off-road conditions), as well as in ordinary urban conditions. Everywhere the oil copes well with loads, retains its properties throughout the entire period of operation.
The second generation Ford Focus is one of the most widespread budget cars in Russia. Despite the fact that the second generation has not been produced for a long time, these models are still often found on the streets of cities. The car has proven itself on the good side. This is a reliable and economical car for every day. But so that its operation does not become a burden, you need to regularly perform maintenance. One of such operations is an oil change on a Ford Focus 2. But replacement is only half the battle. In order for the engine to last a long time, you need to know which oil is suitable for a particular power unit. Well, let's figure out which oil is best for the 2nd generation Ford Focus.
What do they pour from the factory?
On the conveyor, "Focus" came with a semi-synthetic oil that corresponded to Ford's WSS-M2C913-A tolerance. As for the brand, it was a Formula F product with a viscosity of 5w30.
This oil had a whole range of additives that are so necessary when running in a new power unit. But time does not stand still, and now the second "Tricks" are no longer produced. So what is the best oil for Ford Focus 2 (1.8)? There are tons of options.
Motorcraft Full Synthetic (USA)
Note to owners of diesel "Focus": "Motorcraft Full Synthetic" is suitable only for gasoline engines.
"Castrol"
This is already a European brand. All French cars use this oil, and it is not contraindicated for Focus. Judging by the reviews, the products from Castrol are of high quality and detergent properties. This is especially noticeable on engines with mileage over 200 thousand. The product perfectly flushes out all dirt and accumulated deposits. Among the disadvantages, reviews point out a higher cost. The price of the product is 5.5 thousand for five liters. The American Motorcraft is 30 percent cheaper. Also, Motorcraft makes fewer fakes.
But the counterfeit "Castrol" is enough on the domestic market - say motorists. When buying, you need to carefully look at the inscriptions and not buy canisters with incorrect font and curved measuring lines. What kind of oil for "Ford Focus" 2nd generation to pour? If we consider the Castrol line, experts recommend using the Edge line with a viscosity of 5w40. This is pure synthetics, but there are also semi-synthetics. This is Castrol Magnatek 5w30. As practice shows, it is no worse than the previous one - it also washes away dirt and does not thicken in winter.
Other options
Are there any analogues? There are a lot of them, but most use the following products:
- "Motul" 913s. It is a semi-synthetic product with a viscosity of 5w30. One of the cheapest on the list. The cost of a five-liter canister is 2.5 thousand rubles.
- Shell. One of its advantages is that the oil is suitable for any season. With him, the car feels great both in winter and in summer.
- JB German Oil LL Special. It is a synthetic oil. Sold in 4 liter cans. The cost is from 2.5 to 3 thousand rubles. There are options for both gasoline and diesel engines.
How much to fill?
Along with the choice of the brand, motorists are wondering the amount of lubricant. Since different engines were installed on the "Focus", the volume of the poured product will differ. Let's start with the smallest motors. These are 16-valve units with 1.4 petrol injection. It is recommended to use 3.75 liters of oil for them. The same figure is for 1.6-liter diesel engines. But gasoline 1.6-liter units "Duratek" need more oil. Replacement will require 4.1 liters of product. The 1.8 engine is rated at 4.25 liters. For two-liter gasoline-powered engines, it is recommended to use 4.3 liters of oil. But it is worth pouring 5.5 liters into a 2.0 turbodiesel engine.
What if there is no way to measure the volume?
If oil is poured directly from the barrel, you can determine the rate using the dipstick.
Experts say that the level should be average or above that. But it is worth remembering that a lot of oil is just as harmful to the motor as its absence. You need to adhere to certain norms.
About transmission
Along with the engine, don't forget about the transmission. This is an equally important unit after the internal combustion engine. The second generation Ford Focus was fitted with both mechanical and automatic transmissions. Let's start with the first ones. On the manual transmission, the Ford Focus 2 oil should be changed every 75-90 thousand kilometers. No more than 2.2 liters of oil is poured into the box (although the total volume indicated by the manufacturer is 2.8 liters). In terms of viscosity, 75w90 is usually the product of choice. Manufacturers may vary. The most popular is Mobile Mobile 1. Despite its high viscosity, this product has performed well in the northern regions. The owners in the reviews do not complain about the operation of the transmission - it does not need additional heating. The cost of the product is 800 rubles per liter, which is quite acceptable. Also, motorists use Castrol. However, it costs more - from 1.2 thousand rubles per liter. In terms of quality, these two brands are identical, so there is no point in overpaying for the brand.
What other oil can you fill in a Ford Focus 2 box? For those who want to save some more money without sacrificing quality, experts advise considering Eneos Gear 75w90. However, reviews say that the product is afraid of frost. It should only be used in temperate climates, otherwise you could ruin the box. The operating threshold for Enios Gear is minus 20 degrees. What this oil is loved for is its price. One liter costs 375 rubles.
Oil change in automatic transmission on "Ford Focus 2"
An automatic transmission has a completely different operating principle, so the oil differs here both in viscosity and in technical characteristics. Instead, it uses an ATP liquid. It can be recognized by its characteristic red color. Which product should you choose? Experts advise using the original Merkon V oil. How many liters will you need? It all depends on the replacement method:
- With a partial method of changing the oil in the automatic transmission "Ford Focus 2", it will take about five liters of fluid. Usually, this method is used by those who service a car with their own hands.
- If a hardware room is used (that is, a complete replacement), it is necessary to have at least ten liters.
The cost of the procedure, taking into account the work and materials, is 12 thousand rubles. When replacing hardware, specialists dismantle the pallet, clean the filters and magnet, and lubricate the fittings. The pallet is installed back on the sealant (the old one is previously removed with a knife).
At the end of the operation, a jump in idle speed is possible. But after two or three minutes everything will stabilize - this is normal. In time, hardware replacement takes no more than half an hour. And with a partial replacement, you can suffer for about three hours. Plus, after a thousand kilometers, you will again have to break the sump and drain the oil. With a hardware replacement, the next service will be required only after 60 thousand kilometers. It is this figure that is the regulation for replacing the ATP fluid in the automatic transmission "Focus".
So, we have figured out which oil to choose for "Ford Focus 2" in the engine and gearbox.
The regulations for changing engine oils for the second generation Ford Focus, as a rule, are revised towards a decrease in mileage. Therefore, the optimal period between lubrication changes in the motor will be 7-8 thousand km ... Which oil is better to pour into the Ford Focus engine and how much, is there any point in looking for an official Ford oil, let's figure it out right now.
What kind of oil is poured into Ford Focus 2 at the factory
Mileage is more than 150,000 km. There is practically no oil consumption, within the normal range. We pour Castrol.
All Ford Focus cars after 2009 release from the assembly line with semi-synthetics, which is called the Ford Formula F 5W-30 in the engine. This oil meets the tolerances of Ford WSS-M2C913-A and Ford WSS-M2C913-B.
Conveyor oil is produced by the French corporation Elf, and the manufacturer does not recommend changing the lubricant in the engine before the first scheduled maintenance. This is explained special characteristics of semi-synthetic oil , contributing to high-quality engine break-in.
Forgeries Ford Formula F 5W-30
The fake is distinguished by an indistinct text and a dimensional structure on the side of the container.
D0 2009
Original oil.
For engines assembled before 2009, when replacing the old grease with Ford Formula F 5W-30, there is no need to use any special flushes and other fluids, the replacement technology also does not change for topping up old engines with Ford Formula E 5W-30 oil you can use a new oil Formula F.
In fact, quite it is not necessary to use the Ford Formula F 5W-30... It is quite enough that the selected oil meets the Ford standards of Ford WSS-М2С913-A and WSS-М2С913-В, especially since, for obvious reasons, Ford does not produce any oils and uses third-party products.
What oil is better to fill in the Ford Focus 2 engine
If you do not want to experiment with semi-synthetics recommended by Ford, you can safely try to pour oil from the American manufacturer Motorcraft full synthetic 5W-30 S ARI SN.
It is a high quality synthetic product that has Ford approvals ... Moreover, the price of this oil is one and a half times lower than the promoted European brands.
How much to fill?
Oil filling volumes.
For a two-liter Ford Focus engine, at least 4.5 liters will be needed.
Analogs
PETRO-CANADA 5W-30.
European brands often use Castrol Edge 5W-40 Fully Synthetic, Castrol Magnatec 5w-30, but they are significantly more expensive. There are also more budget series - Motul 5w-30 913C. They ask for him 2.5 thousand for 5 liters.
Specifications
By observing the specifications, you can maximize the life of the engine.
In a word, the main indicators of the applicability of engine oils for the second generation Ford Focu remain:
- factory specifications Ford WSS-М2С913-А and Ford WSS-М2С913-В which should be indicated on the sticker, or simply a recommendation from Ford;
- depending on climatic conditions, oils with viscosity characteristics according to SAE 5W-30 and 5W-40 .
Oil filter
Sectional view of Bosch oil filter 0 986 452 044. Made with high quality.
When changing the lubricant, it will be necessary to replace the oil filter as well.
For 1.4 and 1.6 liter engines, the proprietary Ford filter will have a catalog number 1714387-1883037, but in addition to it, you can use analogues from Suzuki with a catalog number 16510-61AR0, Bosch filters 0 986 452 019, Bosch 0 986 452 044, Fram PH3614, as well as the German filters Mann W 610/1 have a good reputation.
conclusions
Therefore, for any Ford Focus engines we use oil of any manufacturer we like with Ford tolerances and the above SAE viscosity characteristics. I wish you all successful choice and a great resource of the motor!
The service manual for any modern Ford vehicle says that the engine can only run on synthetics. In recent years, only 5W-30 synthetic engine oil has been permitted.
When improved turbocharged engines such as EcoBoost appeared, featuring low fuel consumption and enormous power, it became necessary to develop a new lubricating fluid for them. As a result, an energy-saving alternative was created - 5W20 synthetics.
Properties 5W-20
It differs from analogs in its low high-temperature viscosity. The benefits include:
- Easy start;
- Reduced fuel consumption;
- Increasing the wear resistance of the elements of the propulsion system, especially in winter.
However, the use of synthetic 5W-20 oil is not allowed in every car model. Certain tolerance values must be specified on the label for older Ford models - WSS-M2C913-A / B / C.
The latest specification, WSS-M2C948-B, reflects all the requirements of Ford's 5W-20 grease. It is applicable only in gasoline installations. The manufacturer considers the previous composition 5W-30 to be the most suitable for a diesel power unit. However, it must meet the conditions of WSS-M2C913-D.
Grease ACEA A5, B5 may only be filled in special cases. It has several positive qualities: it reduces friction force, saves fuel, and is characterized by high thermal-oxidative resistance. Can be used for a long time without replacement. Suitable for diesel or high octane fuel.
Analogs
The Castrol concern has been working with Ford technologists for many years to develop the latest products for the power plants of Ford Focus vehicles. Castrol makes motor oils that Ford advises to put into their engines. In particular, these are Castrol Magnatec:
- A5 5W-30,
- E 5W-20 is a professional high-octane fuel oil.
You can buy such joint products only at the official center. The popular synthetics Ford Formula F have ceased to be sold only through authorized dealerships. Now it is sold in regular car stores.
What can replace 5W-20
Today, many manufacturers produce motor oils that can fully replace the latest 5W-20 oil. Their list is quite extensive:
- Liquid Moli Special,
- Motul Specific,
- Q8 Formula Exclusive,
- Wuncsh Syntholube F1E,
- Total Quartz 9000.
An excellent replacement for 5W-30 diesel oil are:
- Shell Helix Ultra Proffesional,
- Mobile Super 3000,
- Q8 Formula Nechno FE Plus,
- Kroon-Oil Duranza LSP,
- Liqui Moly Special.
The most optimal tolerances for a Ford vehicle are:
- WSS-M2C948-B - for gasoline engines;
- WSS-M2C913-D - for internal combustion engines on diesel.
WSS-M2C913-C approval is considered ideal. It is allowed in extreme conditions to use oil, the properties of which meet the requirements of the international standard ACEA A5, B5.
100% synthetics 5W-20, together with 5W-40, can successfully replace formulations produced by well-known world manufacturers: Shell, Mobil, Total and others.
Owners of the popular Ford Focus car often wonder about the right oil for their car engine. This question is very relevant today, given the fact that there are a lot of supported "Focuses" in Russia. If the process of changing the oil itself is carried out without much effort and professional skills, then the choice of a lubricant requires theoretical knowledge. In this article, we will consider what parameters you need to pay attention to when choosing a suitable engine lubricant using the example of the first generation Ford Focus.
Why change the oil
The engine is the most complex and important technical unit in a car. It requires timely maintenance, but expensive repairs are often not available to everyone, especially the owners of the supported "Focus" who are not eligible for warranty service. Naturally, it will be much easier to entrust the selection and replacement of oil to a specialist in the dealership, but such a service will cost a lot. But after all, replacing consumables is not the most time-consuming procedure, and you can do it on your own.
The oil must be changed according to the regulations. In addition, you can understand the need for replacement by the condition of the oil. So, to check the color and smell of the oil, you need to make a control measurement using a dipstick. If the liquid is colored dark brown, has a burnt smell and contains metal shavings, then you cannot do without changing the oil.
Oil functions
- Lubrication of internal components of the internal combustion engine, preventing their overheating
- Effective cooling of parts
- Reduced fuel consumption
- Increased engine torque and elasticity
- Motor can run at full power
Oil parameters
Today, there are certain norms, tolerance levels and temperature viscosity standards, according to which you can choose the right product. For each car brand, these parameters may differ, so it is very important to pay attention to the operating instructions.
In addition, an equally important parameter is the type of oil. So, in this case, the lubricant is synthetic, mineral and semi-synthetic. The first option is the most suitable for the Ford Focus.
- Synthetics are the thinnest and most fluid oil that is not afraid of low temperatures. It can be used for both summer and winter operation.
- Semi-synthetics are a compromise option for those who do not have enough funds for pure synthetics. It is better to pour such oil into the engines of old cars. It is the thickest oil on the market today. It is not recommended to use it for low temperatures, as it freezes very quickly due to its density. But with such oil, the owners will never complain about oil leaks.
- Mineral is the exact opposite of synthetic oil. Like mineral water, it is best used for older vehicles that have a high risk of oil leaks.
So, for Ford Focus 1, it is preferable to fill in synthetic oil. In extreme cases, semi-synthetics are used, but only for high mileage.
Also, motor oil is distinguished by seasonality - all-season, summer and winter. Each of them has certain viscosity parameters, tolerances and quality classes.
Factory oil for Ford Focus 1
Factory oil for the Ford Focus engine - Ford Formula F. This is a high-quality and original product that is subject to replacement exclusively in accordance with the regulations, which is about 20 thousand kilometers. If necessary, the regulations can be reduced to 10 thousand if the machine is operated in difficult climatic conditions (which is important for domestic conditions).
- Castrol is one of the best European motor oils. It is recommended by French car manufacturers. There is no doubt about the quality of Castrol - this grease meets all international requirements, and its useful properties have a long service life, which favorably affects the frequency of replacement. The high level of quality of the Castrol product is explained by the fact that the manufacturer constantly monitors production, and at the same time improves its products - making them more environmentally friendly and efficient. More recently, EDGE oil has appeared on the market, which is a variation of the main product.
- Mobil 1 is a product with over 10 years of history. This company has a good reputation and is recognized all over the world. This lubricant is one of the market leaders. Mobil contains various additives that affect engine performance. With such oil, the car can be subjected to colossal loads - for example, drive fast enough, and at the same time not be afraid of engine overload. There are many variants of Mobil 1, and the most optimal of them is Mobil 1 Rally Formula 5W-40. It can be recommended for drivers with aggressive driving style.
- Shell is another market leader in lubricants. The products of this company are resistant to low temperatures, and are suitable even for the most severe frosts.
Output
The brand is not the most important indicator when choosing an oil. So, in this case, first of all, it is necessary to study the parameters of the oil - viscosity, tolerance, quality class, etc., and then select one or another brand. But if the buyer deals only with recognized firms (such as Mobil, Castrol, etc.), then there is no doubt about their quality, and you can safely make a choice in favor of them.
